In Chemistry, there are several chemical reactions that are broken down into numerous minor and major reactions. The endothermic and exothermic reactions in chemistry operate similarly. These emit energy in the form of heat, cold, light, sound, or vibration.
In layman's words, endothermic reactions take up heat-based energy from their environment. An exothermic reaction, on the other hand, discharges energy into the system's surroundings.
The endothermic process is a word used to describe a reaction in which the system takes up heat from its environment. The endothermic process, which includes evaporating liquids, photosynthesis, etc.
A reaction that is exothermic is the opposite of one that is endothermic. It emits energy onto its surroundings as heat or light. Some examples include neutralization, burning a chemical, fuel reactions, dry ice deposition, etc.
To know more about exothermic reaction, visit;
https://brainly.com/question/13014923
#SPJ1
find the value of the following in simplest unit terms. (cancel all possible units.) 2moles1gallon×1gallon1group2moles1gallon×1gallon1group
The value of the original expression, in simplest unit terms (particles or moles), is 7.54614 moles.
To find the value of this expression in simplest unit terms, we need to cancel out the units of moles and gallons.
Starting with the first fraction:
2 moles / 1 gallon
We can use Avogadro's number (6.022 x 10²³) to convert moles to individual particles (atoms, molecules, etc.).
2 moles * 6.022 x 10²³ particles/mole = 1.2044 x 10²⁴ particles
Now we can cancel out the moles and move on to the second fraction:
1 gallon / 1 group
1 gallon = 3.78541 liters
1 mole / 3.78541 liters = 0.264172 moles/liter
Now we can multiply the two fractions:
(2 moles / 1 gallon) * (1 gallon / 0.264172 moles) = 7.54614 moles
So the value of the original expression, in simplest unit terms (particles or moles), is 7.54614 moles.
To know more about simplest unit terms, refer
https://brainly.com/question/31176034
#SPJ11
pace the following in order of o-s-o bond angles. so42-, so32-, so3
The order of O-S-O bond angles in the given species is as follows:
SO3 < SO32- < SO42-
In SO3, all three oxygen atoms are bonded to the sulfur atom by double bonds, and the molecule has a trigonal planar shape. Therefore, the O-S-O bond angle is 120°.
In SO32-, one of the oxygen atoms is bonded to the sulfur atom by a single bond, and the other two oxygen atoms are bonded to the sulfur atom by double bonds. The molecule has a trigonal pyramidal shape, with the single-bonded oxygen atom occupying one of the corners. Therefore, the O-S-O bond angle is less than 120°.
In SO42-, two of the oxygen atoms are bonded to the sulfur atom by double bonds, and the other two oxygen atoms are bonded to the sulfur atom by single bonds. The molecule has a tetrahedral shape, with the four oxygen atoms occupying the corners of the tetrahedron. Therefore, the O-S-O bond angle is the smallest in this species, less than the O-S-O bond angle in SO32.
Learn more about bond angles here:
https://brainly.com/question/31501310
#SPJ11
How does the amount of heat absorbed by an object depend on the type of surface?
(Talk about radiation and use science terminology)
Reflective surfaces absorb less heat because the incoming energy is reflected away.
What is Heat transfer?Heat transfer is a thermal engineering subject that deals with the generation, consumption, conversion, and exchange of thermal energy between physical systems.
Heat transmission techniques include thermal conduction, thermal convection, thermal radiation, and energy transfer via phase shifts.
Radiation, conduction, and convection are all methods of transferring heat energy.
Learn more about Heat transfer here:
https://brainly.com/question/16055406
#SPJ1
Which of the following molecules has the shape of a completed tetrahedron? 1. oxygen gas (O2) 2. glucose (C6H12O6) 3. water (H2O) 4. hydrogen gas (H2)
Out of the molecules listed, only water (H2O) has the shape of a completed tetrahedron. This is because water has two hydrogen atoms bonded to one oxygen atom, with the three atoms forming a tetrahedral shape.
Oxygen gas (O2) and hydrogen gas (H2) are both diatomic molecules, meaning they consist of two atoms bonded together and do not have a tetrahedral shape.
Glucose (C6H12O6) is a larger molecule consisting of carbon, hydrogen, and oxygen atoms, but it does not have a tetrahedral shape either.
Understanding the shape of molecules is important in chemistry because it influences their properties and interactions with other substances.
The molecule with the shape of a completed tetrahedron among the given options is water (H2O).
In a tetrahedral shape, the central atom is surrounded by four other atoms, positioned at the corners of a tetrahedron. In water, the central atom is oxygen (O), and it is bonded to two hydrogen atoms (H).
The remaining two corners of the tetrahedron are occupied by electron pairs, making the molecular geometry a completed tetrahedron.
Oxygen gas (O2) has a linear shape, glucose (C6H12O6) has a complex structure due to multiple carbon atoms, and hydrogen gas (H2) also has a linear shape.
Thus, water (H2O) is the molecule with a completed tetrahedral shape.
To know more about tetrahedron. please visit.....
brainly.com/question/31413615
#SPJ11
flame test can be used to identify the type of halide ion in the ionic salt. true false
The statement that flame tests can be used to identify the type of halide ion in the ionic salt is false. Flame tests are primarily used to identify metal ions, not halide ions, in compounds.
Flame tests involve heating a sample in a flame and observing the resulting color of the flame. This method is based on the fact that when an element is heated, its electrons absorb energy and jump to a higher energy level. As the electrons return to their original energy levels, they release energy in the form of light, producing a characteristic color for each element.
However, flame tests are not effective for identifying halide ions. Halide ions, such as chloride, bromide, and iodide, do not produce distinct colors in a flame test like metal ions do. Instead, halide ions can be identified through different chemical tests, such as the silver nitrate test or the halogen displacement reactions. These tests involve the formation of a precipitate or a chemical reaction that results in a color change, providing more accurate identification of halide ions in ionic salts.
In conclusion, flame tests are not a reliable method for identifying the type of halide ion in an ionic salt, as they are more suited for detecting metal ions. Other chemical tests should be used for halide ion identification.
Know more about Ionic Salts here:
https://brainly.com/question/30420333
#SPJ11
MARKING BRAINLIEST! Please help asap, i need both questions, use ICE box method, thank u
To keep and protect something from damage, change, or waste
a
deforest
b
eliminate
c
conserve
d
consume
Answer:
c conserve
Explanation:
To conserve means to keep something from waste
4a) (10 pts) for each of the following pairs of reactions, indicate which one will be faster and brieflyexplain why. if you expect no significant difference in the reaction rates, say so. no explain
SN₂ reaction will be faster because tertiary alkyl halides undergo SN₁ reaction via carbocation intermediate; E₂ reaction will be faster because primary alkyl halides undergo E₂ reaction; addition reaction will be faster because HBr is a strong electrophile; acid-catalyzed hydration reaction will be faster because it involves the addition of water to alkene
Pair 1: SN₁ vs SN₂ reaction of tertiary alkyl halide with a strong nucleophile.
The SN₂ reaction will be faster because tertiary alkyl halides undergo SN₁ reaction via carbocation intermediate, which is hindered due to the presence of bulky alkyl groups. The steric hindrance makes it difficult for the carbocation to form, and the reaction proceeds via SN₂ mechanism, where the strong nucleophile attacks the substrate from the backside, leading to inversion of configuration.
Pair 2: E₁ vs E₂ reaction of primary alkyl halide with a strong base.
The E₂ reaction will be faster because primary alkyl halides undergo E₂ reaction instead of E₁ reaction. The E₁ mechanism involves the formation of carbocation intermediate, which is less stable for primary alkyl halides due to the absence of any stabilizing groups. In contrast, the E₂ mechanism proceeds via a one-step concerted process, where the base removes the beta-hydrogen, leading to the formation of a double bond.
Pair 3: Addition vs elimination reaction of an alkene with HBr.
The addition reaction will be faster because HBr is a strong electrophile that can readily add to the pi-bond of the alkene. The addition reaction leads to the formation of a bromoalkane, whereas the elimination reaction leads to the formation of a dihaloalkene. However, the elimination reaction is less favored as it requires the breaking of a carbon-carbon double bond.
Pair 4: Acid-catalyzed hydration vs hydrolysis of an alkene.
The acid-catalyzed hydration reaction will be faster because it involves the addition of water to the alkene in the presence of a strong acid catalyst. The acid protonates the double bond, making it more susceptible to nucleophilic attack by water. In contrast, the hydrolysis reaction involves the breaking of the carbon-oxygen double bond, which is thermodynamically unfavorable.
To know more about reaction, refer
https://brainly.com/question/25769000
#SPJ11
what is the free energy change for the formation of one mole of ammonia from its elements under standard conditions? 2nh3 (g) --> n2 (g) 3h2 (g) delta g`
Negative 16.5 kilojoules per mole is the standard free energy change required to produce one mole of ammonia from its constituent components under normal circumstances.
what is free energy?
The quantity of internal energy that is accessible for work in a thermodynamic system is known as free energy in chemistry. It is energy that can be used to do work. As a spontaneous reaction develops, free energy is released. According to the formula G = H T S, the free energy is the difference between the energy created by the process, H, and the energy lost to the environment, T S. The energy that is made accessible (or "free" to conduct productive work") by the process is the difference between the energy created and the energy wasted. As a result, the free energy change required to produce two moles of ammonia from its constituent components under ideal conditions is equivalent to a negative 33 kilojoules per mole.
Therefore Like internal energy, enthalpy, and entropy, free energy is a thermodynamic state function.
learn more about free energy.
https://brainly.com/question/15273908
#SPJ4
a commercial process for preparing ethanol (ethyl alcohol), , consists of passing ethylene gas, , and steam over an acid catalyst to speed up the reaction. the gas phase reaction is
The gas phase reaction for the commercial process of preparing ethanol (ethyl alcohol) involves the reaction between ethylene gas (C2H4) and steam (H2O) over an acid catalyst.
This process is known as the hydration of ethylene.
The reaction can be represented by the following equation:
C2H4 + H2O → C2H5OH
In this reaction, ethylene gas and steam combine to form ethanol. The acid catalyst, which is often a solid acidic material such as phosphoric acid or zeolite, helps to accelerate the reaction by providing a suitable environment for the chemical transformation.
The acid catalyst facilitates the protonation of the ethylene molecule, making it more susceptible to nucleophilic attack by the hydroxide ion derived from water. This leads to the formation of a carbocation intermediate, which is then further attacked by water, resulting in the formation of ethanol.
The gas phase reaction is preferred in this commercial process due to its higher efficiency and better control over the reaction conditions. By passing ethylene gas and steam over the acid catalyst, the reaction can be carried out at elevated temperatures and optimized reaction conditions to maximize the yield of ethanol.
In conclusion, the gas phase reaction for preparing ethanol involves the hydration of ethylene by steam in the presence of an acid catalyst.
Know more about Acid Catalyst here:
https://brainly.com/question/31671681
#SPJ11
explain why teh ph of a solution containing both acetic acid and sodium acetate is higher than that of a solution containing the same concentration of acetic acid alone
The hydrogen ions is removed by the acetate ions making the solution to have a higher pH.
Why is the pH higher?In general, adding sodium acetate to an acetic acid solution will raise its pH compared to using the same quantity of acetic acid alone this is due to the removal of the hydrogen ions called the buffer effect.
The number of acetate ions in the solution will depend on the concentration of sodium acetate added.
A buffer solution, which can withstand pH shifts when modest amounts of acid or base are added to it, produces this effect.
Learn more about pH:https://brainly.com/question/2288405
#SPJ1
which is a correct iupac name for ch 3ch 2och 2ch 2ch 2och 2ch 3? a. ethylene glycol diethyl ether b. 1,3-diethoxypropane c. 1,4-dioxane d. 1,2-diethoxyethane e. 1,2-diethoxymethane
The correct IUPAC name for CH3CH2OCH2CH2OCH2CH3 is 1,4-dioxane. Option (c) is the correct answer.
The correct IUPAC name for the given molecular formula CH3CH2OCH2CH2OCH2CH3 is 1,4-dioxane. This is because it consists of a six-membered ring with two oxygen atoms at positions 1 and 4 and four carbon atoms attached to them.
To arrive at this name, we need to first identify the longest chain of carbon atoms in the molecule. In this case, it is a six-carbon chain that forms a ring. The suffix -ane is added to indicate that all the carbon-carbon bonds in the ring are single bonds.
Next, we need to indicate the positions of the two oxygen atoms in the ring. We start numbering the carbons from any one of the oxygen atoms, and then proceed in such a way that the other oxygen atom gets the lowest possible number. In this case, we start numbering from the oxygen atom at position 1, and the other oxygen atom is at position 4. Finally, we need to indicate the substituents attached to the ring. In this case, there are two ethoxy (-OCH2CH3) groups attached to the carbon atoms at positions 1 and 2. Therefore, the complete name of the molecule is 1,4-dioxane with two ethoxy substituents attached to positions 1 and 2.
To know more about 1,4-dioxane visit:-
https://brainly.com/question/13292514
#SPJ11
if 20.0 g of ch4 reacts with excess oxygen, what is the change in enthalpy for the reaction? ch4(g) 2o2(g)⟶co2(g) 2h2o(l) δh=−890.4kjmol
The change in enthalpy (ΔH) for the given reaction can be calculated using the given enthalpy of reaction (ΔHrxn) and the amount of methane (CH4) that is reacting.
The balanced equation for the combustion of methane is:
CH4(g) + 2O2(g) → CO2(g) + 2H2O(l)
The enthalpy change for this reaction is given as ΔHrxn = -890.4 kJ/mol.
To calculate the change in enthalpy for the given reaction, we need to first determine the moles of CH4 that react. The molar mass of CH4 is 16.04 g/mol, so 20.0 g of CH4 corresponds to:
20.0 g CH4 x (1 mol CH4/16.04 g CH4) = 1.248 mol CH4
According to the balanced equation, 1 mol of CH4 reacts with 2 mol of O2. Since O2 is in excess, we can assume that all of the CH4 will react. Therefore, the moles of O2 that react are:
2 x 1.248 mol CH4 = 2.496 mol O2
Now we can use the given ΔHrxn value to calculate the change in enthalpy for the reaction:
ΔH = ΔHrxn x (moles of CH4 reacted) = -890.4 kJ/mol x 1.248 mol CH4 = -1110.2 kJ
Therefore, the change in enthalpy for the reaction is -1110.2 kJ.
In conclusion, the change in enthalpy for the combustion of 20.0 g of CH4 with excess O2 is -1110.2 kJ. The negative sign indicates that the reaction is exothermic, meaning it releases heat energy to the surroundings. This result shows that the combustion of methane is a highly exothermic reaction and is used in many industrial and energy-producing processes.
To know more about enthalphy visit:
brainly.com/question/14307149
#SPJ11
a chemist titrates of a hydrocyanic acid solution with solution at . calculate the ph at equivalence. the of hydrocyanic acid is .
The pH at equivalence for the titration of hydrocyanic acid with a standard base solution is approximately 1.85.
First, we need to know the concentration of the hydrocyanic acid solution (in moles per liter), the concentration of the standard base solution (in moles per liter), and the equivalence point pH (in units of pH). The equivalence point pH is the pH at which the amount of base added is equivalent to the amount of acid present in the solution.
From the given information, we can calculate the concentration of the hydrocyanic acid solution as:
concentration = moles / L
= 0.014 mol/L
The concentration of the standard base solution is not given, so we can't calculate the equivalence point pH directly. However, we can estimate it by assuming a value for the concentration of the standard base solution. For example, let's assume that the concentration of the standard base solution is also 0.014 mol/L.
In this case, we can use the equation for titration:
moles HCN + moles NaOH - moles NaCN = moles NaOH + volume of titrant
At the equivalence point, the amounts of base and acid added are equal, so we can equate the two sides of the equation and solve for the concentration of HCN:
0.014 mol HCN + 0.014 mol NaOH - 0.014 mol NaCN = 0.014 mol NaOH + V
We know that the volume of the base solution added is equal to the volume of the hydrocyanic acid solution titrated, so we can substitute this expression for V:
V = volume of HCN
0.014 mol HCN + 0.014 mol NaOH - 0.014 mol NaCN = 0.014 mol NaOH + 0.014 mol HCN
Solving for HCN, we get:
HCN = 0.0005 mol
The pH at equivalence is given by the expression:
pH = -log[HCN]
Substituting the value of HCN, we get:
pH = -log[0.0005]
pH = 1.85
Learn more about hydrocyanic visit: brainly.com/question/31325872
#SPJ4
write balanced half-reactions for the following redox reaction: 6cl2(g) c2h5oh(l) 3h2o(l)→ 12cl−(aq) 2co2(g) 12h (aq)
By adding these half-reactions together, we get the overall balanced redox reaction:
C2H5OH(l) + 6Cl2(g) + 3H2O(l) → 2CO2(g) + 12Cl-(aq) + 12H+(aq)
To write the balanced half-reactions for the given redox reaction, we need to first separate it into oxidation and reduction half-reactions.
Oxidation half-reaction: C2H5OH(l) → 2CO2(g) + 8H+(aq) + 8e-
Reduction half-reaction: 6Cl2(g) + 12e- → 12Cl-(aq)
In the oxidation half-reaction, the ethanol (C2H5OH) molecule is losing electrons and getting oxidized to carbon dioxide (CO2) gas. Additionally, it is releasing hydrogen ions (H+) into the solution. The number of electrons lost by the ethanol molecule needs to be balanced with the number of electrons gained in the reduction half-reaction.
In the reduction half-reaction, the chlorine (Cl2) molecule is gaining 12 electrons and getting reduced to chloride ions (Cl-). The number of electrons gained by the chlorine molecule needs to be balanced with the number of electrons lost in the oxidation half-reaction.
By adding these half-reactions together, we get the overall balanced redox reaction:
C2H5OH(l) + 6Cl2(g) + 3H2O(l) → 2CO2(g) + 12Cl-(aq) + 12H+(aq)
learn more about reactions
https://brainly.com/question/29039149
#SPJ11
would delocalized electrons in a benzene ring become free radicals if they destabilized through sonification amplified with an oxidative metal?
Since free radicals are thought to be electron-deficient, we observed that every factor that causes an electron donation to a free radical or a free radical's delocalization (or "spreading out") contributes to its stabilisation.
The circle represents the delocalization of the electrons in the compound benzene. Delocalized electrons in chemistry refer to electrons in a molecule, ion, or solid metal that are not linked to a specific atom or covalent connection. Pi bonds formed of loosely held electrons are found in double bonds; as a result, the loosely held electrons move and end up becoming delocalized. The two benzene resonating structures are formed as a result of electron delocalization.
To learn more about delocalization, click here.
https://brainly.com/question/31227124
#SPJ4
which human activity began 160 years ago and provide the strongest evidence that humans are responsible for increased atmospheric carbon dioxide concentrations/
dtermine the molar concentration of ethanol in. wine that is 14thanol by mass. the density of this wine is 0.93 g/vm3
The molar concentration of ethanol in the wine is 2.83 M. To determine the molar concentration of ethanol in the wine.
We need to convert the given mass percentage of ethanol to molarity.
Let's assume we have 100 g of the wine. Then the mass of ethanol in the wine is:
mass of ethanol = 14% x 100 g = 14 g
Using the molar mass of ethanol (46.07 g/mol), we can calculate the number of moles of ethanol in 14 g:
moles of ethanol = 14 g / 46.07 g/mol = 0.304 mol
The volume of the wine can be calculated using its density:
volume of wine = 100 g / 0.93 g/mL = 107.5 mL = 0.1075 L
Therefore, the molar concentration of ethanol in the wine is:
molarity of ethanol = moles of ethanol / volume of wine = 0.304 mol / 0.1075 L = 2.83 M
So the molar concentration of ethanol in the wine is 2.83 M.
Learn more about concentration here:
https://brainly.com/question/15532279
#SPJ11
write the lewis structure for each molecule. a. ph3 b. scl2 c. hi d. ch4
In PH₃ each phosphorous atom has one lone pair of electrons on it. The lewis structure of the phosphine molecule PH₃ is attached in the diagram
A lewis structure can be used to represent the number of chemical bonds, the participating atoms, and the lone pairs of electrons left on the atoms in the molecule.
Straight solid lines are utilized to show between atoms that are bonded to one another and an excess of electrons or lone pairs of an atom are denoted as dot pairs and are placed on the atoms. As the valence electrons of each phosphorous atom are equal to five from the electronic configuration of the phosphorous atom.
First, the total number of valence electrons in a phosphine molecule is 5 + 1 + 1 +1 = 8.
As each phosphorous atom needs only three electrons to complete its octet. As the octet completes, the rest of the electrons are represented as lone pairs on the P atom. Therefore, each phosphorous atom has one lone pair of electrons on it.
To know more about lewis structure here
https://brainly.com/question/11503188
#SPJ4
what minimum mass of na3po4 (164 g/mol) must be added to 500. ml of 0.100 m ca(no3)2(aq) for a precipitate of calcium phosphate, ca3(po4)2 to form? for calcium phosphate, ksp = 2.07 x 10-33
The minimum mass of Na₃PO₄ that must be added is 5.47 g, to 500. ml of 0.100 m Ca(NO₃)₂(aq) for a precipitate of calcium phosphate, Ca₃(PO₄)₂ to form.
Balanced chemical equation for precipitation reaction is;
3 Ca(NO₃)₂ (aq) + 2 Na₃PO₄ (aq) → Ca₃(PO₄)₂ (s) + 6 NaNO₃ (aq)
From the equation, we can see that 2 moles of Na₃PO₄ are required to produce 1 mole of Ca₃(PO₄)₂. Therefore, the number of moles of Ca₃(PO₄)₂ that can be produced is;
moles of Ca₃(PO₄)₂ = 0.5 L x 0.1 mol/L = 0.05 mol
To calculate the minimum mass of Na₃PO₄ required, we need to use the Ksp expression for calcium phosphate;
Ksp = [Ca₃(PO₄)₂] = (3x)²(2x)³ = 36x⁵
where x is solubility of calcium phosphate.
Since the Ksp value is very small, we can assume that x is much smaller than the initial concentration of Ca²⁺ (0.1 M). This allows us to simplify the expression to;
Ksp = 36x⁵ ≈ 0
Solving for x, we get;
x ≈ 0
This means that all of the calcium and phosphate ions will react to form the precipitate. Therefore, we need to add enough Na₃PO₄ to provide 2 moles of phosphate ions for every 3 moles of Ca²⁺ ions.
moles of Na₃PO₄ = 2/3 x moles of Ca(NO₃)₂
moles of Na₃PO₄ = 2/3 x 0.05 mol
moles of Na₃PO₄ = 0.0333 mol
mass of Na₃PO₄ = moles of Na₃PO₄ x molar mass of Na₃PO₄
mass of Na₃PO₄ = 0.0333 mol x 164 g/mol
mass of Na₃PO₄ = 5.47 g
Therefore, the minimum mass of Na₃PO₄ that must be added is 5.47 g.
To know more about calcium phosphate here
https://brainly.com/question/11082654
#SPJ4
for an endothermic change which is the essential first enthalpy step for the reaction to occur?
For an endothermic reaction, the essential first enthalpy step is typically the absorption of heat (ΔH > 0) to break the existing bonds between the reactants, thus enabling the formation of new bonds to create the products.
This step is known as the "bond breaking" or "endothermic" step and requires an input of energy in order to proceed. Without this initial input of energy, the reaction cannot proceed as the reactant molecules are unable to overcome the activation energy barrier required to break their bonds and undergo a chemical change.
Once the initial bond-breaking step occurs, subsequent bond-forming steps can occur spontaneously and release heat (ΔH < 0), but the initial absorption of energy is critical for the reaction to proceed.
Learn more about enthalpy here:
https://brainly.com/question/16720480
#SPJ11
Which of the following would be considered a type of wireless media?
a. unshielded twisted pair
b. shielded twisted pair
c. coaxial cable
d. microwave
e. fiber optics
Out of the options given, fiber optics would be considered a type of wireless media. This is because fiber optics use light waves to transmit data, rather than physical wires. Wireless media refers to any method of transmitting information without the use of physical wires or cables. Coaxial cable, on the other hand, is a type of physical cable that is used to transmit data.
Neither coaxial cable nor fiber optics are considered wireless media. Wireless media refers to communication methods that don't require physical connections, like radio waves or infrared signals. Both coaxial cable and fiber optics are wired media, as they involve physical cables for transmitting data.
to know more about considered intake pls visit:
https://brainly.com/question/31422799
#SPJ11
suppose a samarium-147 nuclide decays into a neodymium-143 nuclide by emitting an alpha particle. complete the nuclear chemical equation below so that it describes this nuclear reaction.
Answer:
im not sure
Explanation:
at stp, how many grams of mg are required to produce 35 ml of h2 in the reaction: mg (s) 2 hcl (aq) h2 (g) mgcl2 (aq) ?
The place of chemistry referred to as stoichiometry examines the quantitative correlations among reactants and merchandise in a chemical reaction. It entails applying balanced chemical equations to determine how many reactants or products are generated during a reaction.
To answer question, we need to use stoichiometry and the molar volume of a gas at STP.
First, let's write and balance the equation:
Mg (s) + 2 HCl (aq) → H2 (g) + MgCl2 (aq)
Next, we need to determine the number of moles of H2 produced. We know that the volume of H2 produced is 35 mL at STP, which means the pressure is 1 atm and the temperature is 273 K. Using the molar volume of a gas at STP (22.4 L/mol), we can convert the volume to moles:
35 mL H2 × 1 L/1000 mL × 1 mol/22.4 L = 0.00156 mol H2
Since the stoichiometry of the reaction tells us that 1 mole of Mg produces 1 mole of H2, we need 0.00156 mol Mg to produce this amount of H2.
Finally, we can convert moles of Mg to grams using the molar mass of Mg:
0.00156 mol Mg × 24.31 g/mol Mg = 0.038 g Mg
Therefore, we need 0.038 g of Mg to produce 35 mL of H2 at STP in this reaction.
To know more about Stoichiometry visit:
https://brainly.com/question/9743981
#SPJ11
1.0 M N2 and 1.5 M Cl2 were placed in a 4.0 L reaction container. They reacted until equilibrium was reached. Calculate the equilibrium concentration of N2, Cl2 and NCl3. Input these answers in the following 3 questions. N2 + 3 Cl2 ⇄ 2 NCl3 Kc = 1.2x10^-4a. What is the equilibrium concentration of N2?b. What is the equilibrium concentration of Cl2?c. What is the equilibrium concentration of NCl3? (record answer with 2 significant figures)
The equilibrium concentrations are: [N2] = 0.979 M, [Cl2] = 1.437 M, [NCl3] = 0.042 M (recorded with 2 significant figures).
The given reaction is: N2 + 3 Cl2 ⇌ 2 NCl3
The equilibrium constant for this reaction is: Kc = [NCl3]^2 / ([N2][Cl2]^3)
At equilibrium, let the change in concentration of N2 and Cl2 be -x, and the change in concentration of NCl3 be +2x.
Then, the equilibrium concentrations of the species are:
[N2] = (1.0 - x) M
[Cl2] = (1.5 - 3x) M
[NCl3] = (2x) M
The equilibrium constant expression can be written as:
Kc = [NCl3]^2 / ([N2][Cl2]^3)
Kc = (2x)^2 / ((1.0 - x)(1.5 - 3x)^3)
Substituting the given value of Kc = 1.2x10^-4, we get:
1.2x10^-4 = (2x)^2 / ((1.0 - x)(1.5 - 3x)^3)
Solving this equation gives x = 0.021 M.
a. The equilibrium concentration of N2 is:
[N2] = (1.0 - x) M
[N2] = (1.0 - 0.021) M
[N2] = 0.979 M
b. The equilibrium concentration of Cl2 is:
[Cl2] = (1.5 - 3x) M
[Cl2] = (1.5 - 3(0.021)) M
[Cl2] = 1.437 M
c. The equilibrium concentration of NCl3 is:
[NCl3] = (2x) M
[NCl3] = (2(0.021)) M
[NCl3] = 0.042 M
Therefore, the equilibrium concentrations are: [N2] = 0.979 M, [Cl2] = 1.437 M, [NCl3] = 0.042 M (recorded with 2 significant figures).
Learn more about concentrations here:
https://brainly.com/question/10725862
#SPJ11
Write the rate law for the following elementary reaction: ICI(g) + H2(g) → HI(g) + HCl (g) Use k, to stand for the rate constant. rate =
The rate law for an elementary reaction is determined solely by the stoichiometry of the reactants. Since the reaction given is elementary, we can determine the rate law by looking at the coefficients of the reactants. In this case, we see that the rate of the reaction is directly proportional to the concentrations of ICI and H2. Therefore, the rate law for the reaction is rate = k[ICI][H2].
The rate constant, k, is a proportionality constant that depends on the temperature, the presence of catalysts, and other factors. To write the rate law for the given elementary reaction: ICl(g) + H2(g) → HI(g) + HCl(g), we need to consider the rate constant (k) and the concentrations of the reactants. The rate law for this reaction is given by:
Rate = k [ICl] [H2]
In this equation, "k" is the rate constant, "[ICl]" represents the concentration of ICl, and "[H2]" represents the concentration of H2. The rate law shows that the rate of the reaction is directly proportional to the product of the concentrations of the reactants, ICl and H2.
To know more about rate constant visit-
https://brainly.com/question/20305871
#SPJ11
a 8.69-g piece of solid co2 (dry ice) is allowed to sublime in a balloon. the final volume of the balloon is 1.00 l at 303 k. what is the pressure of the gas?
The pressure of the CO2 gas inside the balloon at a temperature of 303 K is approximately 4.76 atm.
he pressure of the CO2 gas inside the balloon at a temperature of 303 K is approximately 4.76 atm.
The sublimation of solid carbon dioxide (CO2) to gaseous CO2 occurs at standard pressure (1 atm) and a temperature of -78.5°C (-109.3°F). Therefore, we can assume that the CO2 gas inside the balloon is at a pressure of 1 atm.
To determine the pressure of the CO2 gas inside the balloon at a temperature of 303 K, we can use the ideal gas law:
PV = nRT
where P is the pressure of the gas, V is the volume of the balloon, n is the number of moles of CO2 gas, R is the ideal gas constant, and T is the temperature of the gas in kelvins.
First, we need to determine the number of moles of CO2 gas that are present in the balloon. We can do this by using the molar mass of CO2 and the mass of the solid CO2 that was initially placed in the balloon:
n = m/M
where m is the mass of the solid CO2 and M is the molar mass of CO2.
The molar mass of CO2 is approximately 44.01 g/mol, so the number of moles of CO2 gas can be calculated as:
n = 8.69 g / 44.01 g/mol = 0.1973 mol
Now we can use the ideal gas law to calculate the pressure of the CO2 gas inside the balloon:
P = nRT/V
where R is the ideal gas constant, which has a value of 0.0821 L·atm/(mol·K).
Substituting the known values into the equation, we get:
P = (0.1973 mol)(0.0821 L·atm/(mol·K))(303 K) / 1.00 L
Simplifying the expression, we get:
P = 4.76 atm
Therefore, the pressure of the CO2 gas inside the balloon at a temperature of 303 K is approximately 4.76 atm.
Learn more about temperature here:
https://brainly.com/question/12035620
#SPJ11
What would be the most appropriate choice of indicator for a titration of a diprotic acid with equivalence points at ph 1. 8 and 7. 7?
For titration of a diprotic acid with two equivalence points at pH 1.8 and 7.7, the most appropriate choice of indicator would be a mixture of two indicators that have pH ranges such as a combination of methyl orange and bromothymol blue.
What are indicators?An indicator is any substance that provides a clear indication, typically through a color change, of the presence or absence of a threshold concentration of a chemical species, like an acid or an alkali in a solution. To give an alkaline solution a yellow hue, for instance, methyl yellow is used.
Considering the given titration, a mixture of methyl orange and bromothymol blue will be suitable because methyl orange has a pH range of 3.1 to 4.4 and Bromothymol blue has a pH range of 6.0 to 7.6.
Learn more about indicators at: https://brainly.com/question/30038798
#SPJ1
Answer:
Cresol red
Explanation:
Cresol red has two color change intervals that bracket the pH of each equivalence point, and with a bit more precision than those of thymol blue.
The lab procedure you just read involved several factors, listed below. Some were variable, and some were constant. Use the drop-down menus to label each factor with V for variable or C for constant.
molarity of HCl used as analyte
molarity of NaOH used as titrant
volume of HCl
volume of NaOH
temperature of HCl
temperature of NaOH
molarity of HCl used as analyte: C
molarity of NaOH used as titrant: C
volume of HCl: V
volume of NaOH: V
temperature of HCl: V
temperature of NaOH: V
Therefore, in the given lab procedure, the molarity of HCl used as the analyte and the molarity of NaOH used as the titrant were kept constant, while the volumes of the solutions and the temperatures of the solutions were varied to determine the unknown concentration of the HCl solution.
In a titration experiment, the molarity of the acid or analyte solution and the molarity of the base or titrant solution are usually kept constant. This is because the amount of the analyte required to react with the titrant depends on the molarity of both solutions, and changing the molarity of either solution will affect the stoichiometry of the reaction.
On the other hand, the volume of the analyte and the titrant are typically variable factors in a titration experiment. The volume of the analyte and the titrant used in the titration can be adjusted to achieve the desired reaction stoichiometry and determine the unknown concentration of the analyte.
The temperature of the solutions can also affect the reaction rate and should be kept constant throughout the titration to ensure accurate and reproducible results. However, in some cases, the temperature of the solutions may be a variable factor that needs to be controlled and measured during the titration.
For more question on molarity click on
https://brainly.com/question/30404105
#SPJ11
the air in an organ pipe is replaced by helium (which has a lower molar mass than air) at the same temperature. how does this affect the normal-mode frequencies of the pipe?
The speed of sound in helium is higher than in air, the normal-mode frequencies of the pipe would be higher when helium is used instead of air. This means that the pitch of the sound produced by the pipe would be higher when helium is used.
Replacing air with helium in an organ pipe would affect the normal-mode frequencies of the pipe. The speed of sound in a gas is proportional to the square root of the ratio of the gas's adiabatic bulk modulus to its density. The adiabatic bulk modulus is related to the speed of sound in the gas and the gas's density. Since helium has a lower molar mass than air, its density is lower than air at the same pressure and temperature.
Therefore, the adiabatic bulk modulus of helium is lower than that of air. This means that the speed of sound in helium is higher than in air. The frequencies of normal modes of a pipe depend on the speed of sound in the gas, the length of the pipe, and the boundary conditions.
To know more about organ pipe here
https://brainly.com/question/31180984
#SPJ4