NEED HELP ASAP 50 POINTS WILL MARK BRAINLIEST!

Answer:

Minerals can form in three primary ways being precipitation, crystallization from a magma and solid- state transformation by chemical reactions (metamorphism). Mineral Precipitation is when a mineral is formed by crystallization from a solution. Examples include quartz, halite (table salt), calcite, and gypsum.

Answer:

When magma cools slowly, deep below the surface, it has time to form large crystals in regular patterns. The second way that minerals form is through solutions. (A solution is when one substance is dissolved uniformly in a liquid.) When elements and compounds leave the solution, they can crystalize.

Answer:

Wind is Air in a natural motion, as that moving horizontally at any velocity along the earth's surface.

The elements of period 2 that satisfy the descriptions are;

a) Neon

b) carbon

c) sodium

c) sodium

We know that the periodic table is an arrangement of the elements in the order of their reactivity. We know that the elements that we have are arranged into groups and periods.

The elements that are in the same group do have similar chemical properties while the elements that are in the same period do have the same number of shells. The properties of the elements in a periods tends to change across the period.

Learn more about periodic table:https://brainly.com/question/11155928

#SPJ1

Answer:

It can be brought into regular conversation easily I feel it means to "provoke" or "speeds significant change or action" I can see someone saying that in a conversation, "chlorine acts as a catalyst promoting the breakdown of ozone".

I would say it would take the same meaning depending on how you say it and when and what the context of what you're saying it in. 

For scientists, it means to change quickly. For someone who says it in a conversation may be saying to stop provoking someone. 

Explanation:

Answer:

[tex]H_5N_5O_6[/tex]

Explanation:

Hello there!

In this case, for the determination of empirical formulas, it is firstly necessary to assume the given percentages of the constituent atoms as the masses so we can compute their moles in the formula:

[tex]n_N=\frac{35gN}{14.01g/mol} =2.5molN\\\\n_H=\frac{5g}{1.01 g/mol}=5molH\\\\n_O=\frac{60g}{16 g/mol} =3molO[/tex]

Thus, we need to divide the resulting moles, by the fewest ones (those of nitrogen) in order to determine the coefficients in the formula:

[tex]N:\frac{2.5}{2.5}=1\\\\H:\frac{5}{2.5}=2\\\\O:\frac{3}{2.5} =1.2[/tex]

However, we need to turn all these numbers, whole numbers, so we multiply by 5 to get:

[tex]H_5N_5O_6[/tex]

Best regards!

Answer:

B

Explanation:

B, Hcl + NaoH = NaCl + H2O

Answer:

yes you do so you know how strong it is how maluble it's is so it can be customised to it's specific use

Answer:

alloy's properties are usually different from those of its component elements. Alloy constituents are usually measured by mass. Unlike pure metals, most alloys do not have a single melting point; rather, they have a melting range in which the substance is a mixture of solid and liquid.

Alloy steels have a wide range of special properties, such as hardness, toughness, corrosion resistance, magnetizability, and ductility. Nonferrous alloys, mainly copper–nickel, bronze, and aluminum alloys, are much used in coinage.

Pure metals are useful but their applications are often limited to each individual metal's properties. Alloys allow metal mixtures that have increased resistance to oxidation, increased strength, conductivity, and melting point; Essentially any property can be manipulated by adjusting alloy concentrations.

dnt learn all thr properties.

these are the main properties..u can learn thse only. hope it will help u

Answer and Explanation:

Dipole-Dipole interactions are weaker than hydrogen bonds.

Hydrogen bonds are a form of dipole-dipole interactions, being the strongest form of dipole-dipole interactions.

#teamtrees #PAW (Plant And Water)

Answer:

47.27 g HNO₃

Explanation:

The reaction between nitric acid (HNO₃) and calcium hydroxide (Ca(OH)₂) is the following:

2HNO₃(aq) + Ca(OH)₂(aq) → Ca(NO₃)₂ + 2H₂O(l)

According to the chemical equation, 2 moles of HNO₃ reacts with 1 mol of Ca(OH)₂. At the point of total neutralization, the total number of moles of  HNO₃ reacts with the total number of moles of Ca(OH)₂:

2 x moles HNO₃ = moles Ca(OH)₂

The number of moles is equal to the product of molarity of the solution (M) and the volume in liters (V):

M(HNO₃) = ?

M(Ca(OH)₂) = 0.73 M

V(HNO₃) = 25.00 mL x 1 L/1000 mL = 0.025 L

V(Ca(OH)₂) = 51.4 mL x 1 L/1000 mL = 0.0514 L

So, we can write the equation at neutralization point as:

2 x (M(HNO₃) x V(HNO₃)) = M(Ca(OH)₂) x V(Ca(OH)₂)

From this, we can calculate the molarity of HNO₃:

M(HNO₃) = (M(Ca(OH)₂) x V(Ca(OH)₂))/2 x V(HNO₃)

               = (0.73 M x 0.0514 L)/(2 x 0.025 L)

               = 0.75 M HNO₃

We can convert the molarity from M (mol/L) to g/L by using the molecular weight of HNO₃:

Mw(HNO₃) = 1 g/mol H + 14 g/mol N + (3 x 16 g/mol O) = 63 g/mol

Finally, we multiply the molarity by the molecular weight to obtain the grams of nitric acid per liter of solution:

0.75 mol/L HNO₃ x 63 g/mol = 47.27 g HNO₃

Answer:

Answer is C

Explanation:

the valency of sulphur is 2 ans sodium is 1

by crossing it forms NA2S

Explanation:

Chemical fertilizers raise crop yields, but their heavy usage has hardened the soil, diminished fertility, reinforced pesticides, contaminated air and water, and emitted greenhouse gases, posing health and environmental risks.

Answer:

D

Explanation:

When an atom loses an electron the number of electrons exceeds the number of protons. This means that the negative charge induced by the electrons exceeds the positive charge induced by the protons.

Answer:

Not sure yet but I will get back

Explanation:

Answer:

There are 0.16 g of sulphur in 3.0 × 10²¹ atoms.

Explanation:

One mole of a substance contains 6.02 × 10²³ particles

One mole of sulphur atom contains 6.02 × 10²³ atoms

Number of moles of sulphur present in 3.0 × 10²¹ atoms = 3.0 ×10²¹/6.02 10²³

Number of moles of sulphur atom = 0.00498 moles of sulphur atom

The mole of a substance is related to its mass by a quantity known as molar mass which is defined as the mass of one mole of that substance.

Molar mass of sulphur atom = 32 grams per mole (g/mol)

Mass of 0.00498 moles of sulphur atom = 0.00498 moles × 32 g/mol

Mass of sulphur = 0.16 g

Therefore, there are 0.16 g of sulphur in 3.0 × 10²¹ atoms.

Answer:

coal chemicals sun

Explanation:

Answer:

Temporary hardness is a type of water hardness caused by the presence of dissolved bicarbonate minerals (calcium bicarbonate and magnesium bicarbonate). ... However, unlike the permanent hardness caused by sulfate and chloride compounds, this "temporary" hardness can be reduced by boiling the water.

Answer:

5 mole of N2O : 112 litre of N2O

5 mole of N2O : 220 g of N2O

Then,

Density = mass/ volume

= 220/112

= 1.96 g per litre

Answer:

The Earth would become cooler until it probably attains a new equilibrium between absorbed solar energy and emitted solar energy.

Explanation:

The earth's energy balance refers to the balance between the energy absorbed from the sun (solar radiation) and the emitted (thermal) energy leaving the Earth. This balance ensures that the earth's surface temperature remains fairly constant.

When energy from the sun reaches the earth, it is absorbed and used by various features of the earth which uses it for their energy needs. Eventually, any excess radiant energy is sent back or emitted from the earth back into space such that the balance between absorbed and emitted energy is maintained.

However, if there is an imbalance whereby more energy is emitted than is absorbed, this would result in the earth losing more heat than it receives. This would result in the earth becoming more significantly colder until it probably attains a new equilibrium between absorbed solar energy and emitted solar energy.

Answer:

Rhodium-122 < Palladium-109 < Silver-109  <  Cadmium-106 < Indium-110

Explanation:

Atomic number - Number of protons.

The number displayed at the end of the element in this question represents the mass number (Number of protons + Number of neutrons).

The atomic number of the isotopes are given below;

Silver-109  --> 47

Cadmium-106  --> 48

Rhodium-122   --> 45

Indium-110   --> 49

Palladium-109  --> 46

Arranging in order of increasing atomic number from lowest to highest;

Rhodium-122 < Palladium-109 < Silver-109  <  Cadmium-106 < Indium-110

Answer:

588 mole

29.4

+29.4

5 8. 8g

Answer:

P₂ = 113.49 kPa

Explanation:

Given that,

Initial pressure, P₁ = 101 kPa

Initial temperature, T₁ = 10.0°C = 283 K

Final temperature, T₂ = 45°C = 318 K

The relation between pressure and temperature is given by :

[tex]\dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]

Where

P₂ is the new pressure

So,

[tex]P_2=\dfrac{P_1T_2}{T_1}\\\\P_2=\dfrac{101 \times 318}{283 }\\\\P_2=113.49\ kPa[/tex]

So, the new pressure is equal to 113.49 kPa.

30.1%

do not ask why it just is.

Answer:

The third one!

Answer:

You will need to have a red flower in the top left, a pink flower in the top right and bottom left, and a white flower in the bottom right.

Explanation:

This flower appears to express color through codominance, which means that both genes express themselves. "R" is the dominant gene for red, and "r" is the recessive gene for white. When a flower has RR genotype, the phenotype will be a red flower. When a flower has an Rr genotype, the red and white genes will both be expressed and the phenotype will be pink. When a flower has an rr genotype, it lacks the red gene and will therefore be only white.

Answer:

The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]

Explanation:

An electron has an acceleration of 2.33*10² [tex]\frac{m}{sec^{2} }[/tex]

To be able to express in units [tex]\frac{m}{min^{2} }[/tex], you must carry out the conversion taking into account that 1 [tex]\frac{m}{sec^{2} }[/tex]= 3600 [tex]\frac{m}{min^{2} }[/tex]. Then you can apply the following rule of three: if 1 [tex]\frac{m}{sec^{2} }[/tex] equals 3600 [tex]\frac{m}{min^{2} }[/tex], 2.33 * 10² [tex]\frac{m}{sec^{2} }[/tex] equals how much [tex]\frac{m}{min^{2} }[/tex]?

[tex]\frac{m}{min^{2} }=\frac{2.33*10^{2} \frac{m}{sec^{2} }*3600\frac{m}{min^{2} }}{1\frac{m}{sec^{2} }}[/tex]

[tex]\frac{m}{min^{2} }=838800[/tex]

The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]

Answer:

1.The substance(s) to the left of the arrow in a chemical equation are called reactants. A reactant is a substance that is present at the start of a chemical reaction. The substance(s) to the right of the arrow are called products . A product is a substance that is present at the end of a chemical reaction.The combustion of methane or octane is exothermic; it releases energy. CH4 + 2 O2 → CO2 + 2 H2O + energy The energies of the products are lower than the energiies of the reactants.

Explanation:

Answer:

The volume of solution in liters required to make a 0.250 M solution from 3.52 moles of solute is 14.08 liters of solution

Explanation:

The question relates to the definition of the concentration of a solution which is the number of moles per liter (1 liter = 1 dm³) of solution

Therefore we have;

The concentration of the intended solution = 0.250 M

Therefore, the number of moles per liter of the required resolution = 0.250 moles

Therefore, the concentration of the required solution = 0.250 moles/liter

The volume in liters of the required solution that will have 3.52 moles of the solute is given as follows;

The required volume of solution = The number of moles of the solute/(The concentration of the solution)

∴ The required volume of solution = 3.52 moles/(0.250 moles/liter) = 14.08 liters

The required volume of solution to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.

Therefore the number of liters required to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.

Answer:

the answer is c I believe

Answer:

WHITE BLOOD SELL?

Explanation:

Answer:

chemical energy

Explanation:

just put that

Answer:

chemical energy

Explanation:

it is the light dependent reaction