At 1 millibar pressure, the collision frequency is approximately 6.282 x 10⁶ collisions per second, while at 1 bar pressure, the collision frequency is approximately 6.
The collision frequency formula is given by:
Collision frequency = (N * σ * v) / V
Where:
N is the number of molecules in the gas, σ is the collision cross-sectional area of the molecule,v is the root mean square velocity of the molecule, V is the volume of the gas
Let's calculate the collision frequency at both 1 millibar and 1 bar pressure for an O₂ molecule.
At 1 millibar pressure (1 millibar = 0.001 bar), we have:
Pressure (P) = 0.001 bar, R is the ideal gas constant = 0.0831 L⋅bar/(mol⋅K), T is the temperature in Kelvin (assumed to be constant)
Using the ideal gas equation: PV = nRT, where n is the number of moles, we can calculate the number of moles:
n = (P * V) / (R * T)
Since we are considering a single O₂ molecule, the number of molecules (N) is Avogadro's number (6.022 x 10²³) times the number of moles (n):
N = (6.022 x 10²³) * n
Let's assume a temperature of 298 K and a volume of 1 liter (V = 1 L):
n = (0.001 bar * 1 L) / (0.0831 L⋅bar/(mol⋅K) * 298 K) ≈ 0.040 mol
N ≈ (6.022 x 10²³) * 0.040 ≈ 2.409 x 10^22 molecules
Now, we can calculate the collision frequency at 1 millibar:
Collision frequency = (N * σ * v) / V
Assuming the root mean square velocity (v) is approximately 515 m/s (at 298 K), and the cross-sectional area (σ) is given as 0.410 nm²
σ = 0.410 nm² = (0.410 x 10¹⁸ m²)
v = 515 m/s
V = 1 L = 0.001 m³
Collision frequency = (2.409 x 10²² molecules * 0.410 x 10^-18 m² * 515 m/s) / 0.001 m³
Collision frequency ≈ 6.282 x 10⁶ collisions per second (at 1 millibar)
Now, let's calculate the collision frequency at 1 bar pressure:
Using the same formula with the new pressure value:
Pressure (P) = 1 bar
n = (1 bar * 1 L) / (0.0831 L⋅bar/(mol⋅K) * 298 K) ≈ 0.402 mol
N ≈ (6.022 x 10²³) * 0.402 ≈ 2.417 x 10²³ molecules
Collision frequency = (2.417 x 10²³ molecules * 0.410 x 10¹⁸ m² * 515 m/s) / 0.001 m³
Collision frequency ≈ 6.335 x 10¹¹ collisions per second (at 1 bar)
To know more about frquency click on below link :
https://brainly.com/question/31994304#
#SPJ11
: There are 3 blocks of metal. The first block is in thermal equilibrium with the second block. The second block is in thermal equilibrium with the third block. Therefore, the first and the third block are in thermal equilibrium. This most closely describes which law of thermodynamics? The Oth law The 1st law The 2 nd law The 3rd law
The statement you provided aligns with the Zeroth Law of Thermodynamics, which states that if two systems are individually in thermal equilibrium with a third system, then they are in thermal equilibrium with each other.
In your scenario, the first block and the second block are in thermal equilibrium, and the second block and the third block are also in thermal equilibrium.
Therefore, by the Zeroth Law, it follows that the first and third blocks must be in thermal equilibrium with each other. This law establishes the concept of temperature and allows for the measurement of temperature through the establishment of thermal equilibrium.
It serves as the foundation for the construction of temperature scales and provides a fundamental principle for understanding and analyzing thermal interactions between different systems.
To know more about Thermodynamics refer to-
https://brainly.com/question/1368306
#SPJ11
what is the fundamental requirements for getting a
leasing action in a He-Ne laser and how it can be realised?
The fundamental requirements for achieving lasing action in a He-Ne (Helium-Neon) laser are population inversion and optical feedback. Population inversion is when there are more atoms or molecules in an excited state than in the ground state.
Population inversion refers to the condition where the number of atoms or molecules in an excited state is higher than the number in the ground state. In the case of a He-Ne laser, this requires a higher population of neon atoms in the excited state compared to the ground state.
Achieving population inversion typically involves an electrical discharge passing through the gas mixture of helium and neon, exciting the neon atoms to higher energy levels.
Optical feedback is essential for lasing action and refers to the process of re-amplifying and redirecting the emitted light back into the laser cavity.
It is achieved by using mirrors at the ends of the laser cavity, one of which is partially reflective to allow a fraction of the light to pass through. This partial reflection creates a feedback loop, allowing photons to stimulate further emission and amplification of the light within the cavity.
By maintaining population inversion and providing optical feedback, the He-Ne laser can achieve stimulated emission and generate coherent light at a specific wavelength (usually 632.8 nm). This coherent light is characterized by its narrow spectral width and low divergence.
In conclusion, the fundamental requirements for obtaining lasing action in a He-Ne laser are population inversion, which is achieved by electrical excitation of the gas mixture, and optical feedback, accomplished through the use of mirrors to create a feedback loop.
These requirements enable the laser to emit coherent light and make He-Ne lasers widely used in various applications such as scientific research, metrology, and alignment purposes.
To know more about population refer here:
https://brainly.com/question/32928076#
#SPJ11
The box slides down the helical ramp such that
r= 0.5 m, theta= (0,6t3) rad, and z = (4 - 0.3t2) m, where t
is in seconds.
a) Calculate the time that the box is at an angular position
theta = 3.5 rad.
The box is at an angular position θ = 3.5 rad approximately 0.779 seconds after starting its motion
To calculate the time when the box is at an angular position of θ = 3.5 rad, we need to solve the equation θ = [tex]6t^3[/tex] for t.
Given: θ = 3.5 rad
Let's set up the equation and solve for t:
[tex]6t^3[/tex] = 3.5
Divide both sides by 6:
[tex]t^3[/tex] = 3.5/6
Cube root both sides to isolate t:
t = [tex](3.5/6)^{1/3}[/tex]
Using a calculator, we can evaluate this expression:
t ≈ 0.779 seconds
Therefore, the box is at an angular position θ = 3.5 rad approximately 0.779 seconds after starting its motion.
Learn more about motion here:
https://brainly.com/question/12640444
#SPJ11
4 1 point A 1.31 kg flower pot falls from a window. What is the momentum of the pot when it has fallen far enough to have a velocity of 2.86m/s? O2.18 kgm/s 3.75 kgm/s 6.35 kgm/s 0.458 kgm/s Next Prev
The momentum of a 1.31 kg flower pot that falls from a window and has a velocity of 2.86 m/s is 3.75 kgm/s.
The momentum of a 1.31 kg flower pot that falls from a window and has a velocity of 2.86 m/s is 3.75 kgm/s.
This answer can be obtained through the application of the momentum formula.
Potential energy is energy that is stored and waiting to be used later.
This can be shown by the formula; PE = mgh
The potential energy (PE) equals the mass (m) times the gravitational field strength (g) times the height (h).
Because the height is the same on both sides of the equation, we can equate the potential energy before the fall to the kinetic energy at the end of the fall:PE = KE
The kinetic energy formula is given by: KE = (1/2)mv²
The kinetic energy is equal to one-half of the mass multiplied by the velocity squared.
To find the momentum, we use the momentum formula, which is given as: p = mv, where p represents momentum, m represents mass, and v represents velocity.
p = mv = (1.31 kg) (2.86 m/s) = 3.75 kgm/s
Therefore, the momentum of a 1.31 kg flower pot that falls from a window and has a velocity of 2.86 m/s is 3.75 kgm/s.
Learn more about potential energy
brainly.com/question/24284560
#SPJ11
A spherical conducting shell of inner radius r 1
and outer radius r 2
has a charge Q.
(a) A charge q is placed at the centre of the shell. What is the surface charge density on the inner and outer surfaces of the shell?
(b) Is the electric field inside a cavity (with no charge) zero, even if the shell is not spherical, but has any irregular shape? Explain.
a)The charge q placed at the center of the shell will cause an equal and opposite charge to be induced on the inner surface of the shell. Since the surface of a conductor is an equipotential, the entire charge on the shell will be distributed evenly over the outer surface.
The charge on the inner surface is −q. The charge on the outer surface of the shell is Q + q. This is equivalent to the total charge Q on the shell plus the charge q at the center of the shell. Therefore, the surface charge density on the inner surface is −q/4πr1^2 and the surface charge density on the outer surface is Q + q/4πr2^2.b) The electric field inside a spherical cavity of a conductor having an irregular shape is zero.
Because of the equipotential nature of the surface, the electric field inside a cavity is zero, and it is independent of the shape of the conductor.
To know more about equipotential visit:-
https://brainly.com/question/13266693
#SPJ11
Find the change
in specific internal energy Δe when the temperature of an ideal gas
with a specific heat ratio of 1.2 and a molecular weight of 28
changes from 900 K to 2800 K. The unit of specific i
The change in specific internal energy Δe is 8800 J/kgK.
The specific internal energy of an ideal gas with a specific heat ratio of 1.2 and a molecular weight of 28 changes from 900 K to 2800 K.
Find the change in specific internal energy Δe. The unit of specific i is Joule per kilogram Kelvin (J/kgK).
The change in specific internal energy Δe is given by;
Δe = C p × ΔT
where ΔT = T₂ - T₁T₂
= 2800 KT₁
= 900 KC p = specific heat at constant pressure
C p is related to the specific heat ratio γ as;
γ = C p / C v
C v is the specific heat at constant volume.
C p and C v are related to each other as;
C p - C v = R
where R is the specific gas constant.
Substituting the above equation in the expression of γ, we have;
γ = 1 + R / C v
If the molecular weight of the gas is M and the gas behaves ideally, then the specific gas constant is given by;
R = R / M
where R = 8.314 J/molK
Substituting for R in the equation for γ, we have;
γ = 1 + R / C v
= 1 + (R / M) / C v
= 1 + R / (M × C v)
For a diatomic gas,
C v = (5/2) R / M
Therefore,γ = 1 + 2/5
= 7/5
= 1.4
Substituting the values of C p, γ, and ΔT in the expression of Δe, we have;
Δe = C p × ΔT
= (R / (M × (1 - 1/γ))) × ΔT
= (8.314 / (28 × (1 - 1/1.4))) × (2800 - 900)
= 8800 J/kgK
Therefore, the change in specific internal energy Δe is 8800 J/kgK.
To know more about internal energy, visit:
https://brainly.com/question/11742607
#SPJ11
What is the effective capacitance for the network of capacitors shown in Figure 22-24 in UF? 12.0 V 2.00 με 4.00 uF Figure 22-24 Problem 38. Type your numeric answer and submit 6.00 με 1.00 με 3
Given information:Potential difference = 12 VCapacitances are: 2.00 µF, 4.00 µF, 6.00 µF and 1.00 µF We are supposed to find out the effective capacitance for the network of capacitors shown in Figure 22-24 in UF. Let's look at the capacitors closely to understand the configuration,As we can see, two capacitors C1 and C2 are in series.
Their effective capacitance is equal to:1/C = 1/C1 + 1/C2Substituting the values, we get:1/C = 1/4.00 µF + 1/6.00 µF1/C = 0.25 µF + 0.166 µF1/C = 0.416 µF
The effective capacitance of C1 and C2 is 0.416 µF. Now, this effective capacitance is in parallel with C3.
The net effective capacitance is equal to: C = C1,2 + C3C = 0.416 µF + 2.00 µFC = 2.416 µF
Now, this effective capacitance is in series with C4. Therefore, the net effective capacitance is equal to:1/C = 1/C + 1/C4Substituting the values, we get:1/C = 1/2.416 µF + 1/1.00 µF1/C = 0.413 µF + 1 µF1/C = 1.413 µFC = 0.708 µF
Thus, the effective capacitance of the given network of capacitors is 0.708 µF.
To know about capacitance visit:
https://brainly.com/question/31871398
#SPJ11
1. What are typical defects that have to be detected by NDE techniques? a. Electrical resistivity. b. Internal cracks. c. Surface cracks. d. High humidity. 2. List 5 NDE Methods and give typical defec
1. Typical defects that have to be detected by NDE techniques are internal cracks, surface cracks, and high humidity.
NDE techniques are used to inspect and evaluate materials or components without causing damage or destruction.
The main purpose of these techniques is to detect defects in materials or components so that they can be repaired or replaced before they cause serious damage.
2. The following are 5 NDE methods and their typical defects:
Radiography is a method that uses x-rays or gamma rays to produce images of the inside of an object.
Typical defects that can be detected by radiography include internal cracks, porosity, and inclusions.
Ultrasonic testing is a method that uses high-frequency sound waves to detect defects in materials.
Typical defects that can be detected by ultrasonic testing include internal cracks, voids, and inclusions.
Magnetic particle testing is a method that uses magnetic fields to detect defects in materials.
Typical defects that can be detected by magnetic particle testing include surface cracks and subsurface defects.
To know more about techniques visit:
https://brainly.com/question/31591173
#SPJ11
An open cylindrical tank 2 meters in diameter and 4 meters tall is half – full of water. The tank is rotated about its vertical axis at constant angular speed. How much water is spilled (in liters) if the angular speed is 90 rpm?
a. 738
b. 854
c. 635
d. 768
When an open cylindrical tank, with a diameter of 2 meters and a height of 4 meters, is rotated about its vertical axis at a constant angular speed of 90 rpm, the amount of water spilled can be determined by calculating the volume of the spilled water.
By considering the geometry of the tank and the rotation speed, the spilled water volume can be calculated. The calculation involves finding the height of the water level when rotating at the given angular speed and then calculating the corresponding volume. The answer to the question is the option that represents the calculated volume in liters.
To determine the amount of water spilled, we need to calculate the volume of the water that extends above the half-full level of the cylindrical tank when it is rotated at 90 rpm.First, we find the height of the water level at the given angular speed. Since the tank is half-full, the water level will form a parabolic shape due to the centrifugal force. The height of the water level can be calculated using the equation h = (1/2) * R * ω^2, where R is the radius of the tank (1 meter) and ω is the angular speed in radians per second.
Converting the angular speed from rpm to radians per second, we have ω = (90 rpm) * (2π rad/1 min) * (1 min/60 sec) = 3π rad/sec. Substituting the values into the equation, we find h = (1/2) * (1 meter) * (3π rad/sec)^2 = (9/2)π meters. The height of the spilled water is the difference between the actual water level (4 meters) and the calculated height (9/2)π meters. Therefore, the height of the spilled water is (4 - (9/2)π) meters.
To find the volume of the spilled water, we calculate the volume of the frustum of a cone, which is given by V = (1/3) * π * (R1^2 + R1 * R2 + R2^2) * h, where R1 and R2 are the radii of the top and bottom bases of the frustum, respectively, and h is the height. Substituting the values, we have V = (1/3) * π * (1 meter)^2 * [(1 meter)^2 + (1 meter) * (1/2)π + (1/2)π^2] * [(4 - (9/2)π) meters].
By evaluating the expression, we find the volume of the spilled water. To convert it to liters, we multiply by 1000. The option that represents the calculated volume in liters is the correct answer. Answer is d. 768
Learn more about parabolic here;
brainly.com/question/29782370
#SPJ11
If event X cannot occur unless y occurs, and the occurrence of X is also enough to guarantee that Y must occur, then: a) X is both necessary and sufficient for Y b) X is only necessary for Y c) X is o
The correct answer is a) X is both necessary and sufficient for Y. If event X cannot occur unless y occurs, and the occurrence of X is also enough to guarantee that Y must occur.
If event X cannot occur unless Y occurs:
This statement implies that Y is a prerequisite for X. In other words, X depends on Y, and without the occurrence of Y, X cannot happen. Y is necessary for X.
The occurrence of X is enough to guarantee that Y must occur:
This statement means that when X happens, Y is always ensured. In other words, if X occurs, it guarantees the occurrence of Y. X is sufficient for Y.
If event X cannot occur unless y occurs, and the occurrence of X is also enough to guarantee that Y must occur so X is both necessary and sufficient for Y.
Learn more about statement here:
https://brainly.com/question/14425078
#SPJ4
Solution??
Q.4) Suppose that a system of N atoms of type A is placed in a diffusive contact with a system of N atoms of type B at the same temperature and volume. (a)Show that after diffusive equilibrium is reac
After diffusive equilibrium is reached, the average number of atoms of type A in the system will be equal to the average number of atoms of type B in the system, i.e., the system will have an equal distribution of atoms of type A and B.
In a diffusive contact between two systems, atoms can move between the systems until equilibrium is reached. In this scenario, we have two systems: one with N atoms of type A and the other with N atoms of type B. Both systems are at the same temperature and volume.
During the diffusion process, atoms of type A can move from the system containing type A atoms to the system containing type B atoms, and vice versa. The same applies to atoms of type B. As this process continues, the atoms will redistribute themselves until equilibrium is achieved.
In equilibrium, the average number of atoms of type A in the system will be equal to the average number of atoms of type B in the system. This is because the atoms are free to move and will distribute themselves evenly between the two systems.
Mathematically, this can be expressed as:
⟨NA⟩ = ⟨NB⟩
where ⟨NA⟩ represents the average number of atoms of type A and ⟨NB⟩ represents the average number of atoms of type B.
After diffusive equilibrium is reached in a system of N atoms of type A placed in a diffusive contact with a system of N atoms of type B at the same temperature and volume, the average number of atoms of type A in the system will be equal to the average number of atoms of type B in the system.
To know more about diffusive equilibrium visit
https://brainly.com/question/6094731
#SPJ11
1. Define what you understand by the terms static and dynamic balancing. (2) 2. State the importance of balancing rotating masses and give three effects that unbalanced systems can cause. (4) 3. Explain the condition on which a system can be said to be in complete balance. (2)
Static balancing refers to the process of balancing a rotating object or system while it is at rest. It involves redistributing the mass of the object in such a way that its center of mass coincides with the axis of rotation.
This ensures that the object remains in balance and does not vibrate or experience undue forces during operation. Dynamic balancing, on the other hand, involves balancing a rotating object or system while it is in motion. It takes into account both the mass distribution and the eccentricity of the rotating parts, aiming to minimize vibrations and maximize the smoothness of operation.
Balancing rotating masses is important for several reasons:
First, it helps to prevent excessive vibrations that can lead to premature wear, fatigue, or failure of the system.
Second, balancing reduces the forces acting on the bearings, shafts, and other components, thus increasing their lifespan and efficiency.
Third, it improves the overall performance and stability of the rotating machinery, ensuring smooth operation and minimizing unnecessary energy losses.
Effects of unbalanced systems include:
Vibrations: Unbalanced rotating masses can cause significant vibrations, leading to discomfort, damage to components, and reduced accuracy or performance of the system.
Increased stresses: Unbalanced forces can result in higher stresses on the components, potentially leading to fatigue failure and reduced structural integrity.
Reduced lifespan: Unbalanced systems can experience increased wear and tear, resulting in a shorter lifespan for the components and the system as a whole.
A system can be said to be in complete balance when its center of mass coincides with the axis of rotation. In other words, the mass distribution should be such that there are no residual forces or moments acting on the system. Achieving complete balance involves ensuring that the forces and moments generated by the rotating masses cancel each other out, resulting in a net force and moment of zero. This condition ensures that the system operates smoothly, without vibrations or unnecessary stresses, and maximizes its efficiency and lifespan.
To learn more about center of mass click here
https://brainly.com/question/27549055
#SPJ11
Two tourist A and B who are at a distance of 40 km from their camp must reach it together in the shortest possible time. They have one bicycle and they decide to use it in turn. 'A' started walking at a speed of 5 km hr-' and B moved on the bicycle at a speed of 15 km hr!. After moving certain distance B left the bicycle and walked the remaining distance. A, on reaching near the bicycle, picks it up and covers the remaining distance riding it. Both reached the camp together. (a) Find the average speed of each tourist. (b) How long was the bicycle left unused?
a) The bicycle was left unused for 0.8 hours or 48 minutes. Hence, the correct option is (a) The average speed of Tourist A is 5 km/hr and that of Tourist B is 9 km/hr. (b) The bicycle was left unused for 48 minutes.
(a) Let's assume that the distance travelled by B on the bicycle be d km.
Then the distance covered by A on foot = (40 - d) km
Total time taken by A and B should be equal as they reached the camp together
So, Time taken by A + Time taken by B = Total Time taken by both tourists
Let's find the time taken by A.
Time taken by A = Distance covered by A/Speed of A
= (40 - d)/5 hr
Let's find the time taken by B.
Time taken by B = Time taken to travel distance d on the bicycle + Time taken to travel remaining (40 - d) distance on foot
= d/15 + (40 - d)/5
= (d + 6(40 - d))/30 hr
= (240 - 5d)/30 hr
= (48 - d/6) hr
Now, Total Time taken by both tourists = Time taken by A + Time taken by B= (40 - d)/5 + (48 - d/6)
= (192 + 2d)/30
So, Average Speed = Total Distance/Total Time
= 40/[(192 + 2d)/30]
= (3/4)(192 + 2d)/40
= 18.6 + 0.05d km/hr
(b) Total time taken by B = Time taken to travel distance d on the bicycle + Time taken to travel remaining (40 - d) distance on foot= d/15 + (40 - d)/5
= (d + 6(40 - d))/30 hr
= (240 - 5d)/30 hr
= (48 - d/6) hr
We know that A covered the remaining distance on the bicycle at a speed of 5 km/hr and the distance covered by A is (40 - d) km. Thus, the time taken by A to travel the distance (40 - d) km on the bicycle= Distance/Speed
= (40 - d)/5 hr
Now, we know that both A and B reached the camp together.
So, Time taken by A = Time taken by B
= (48 - d/6) hr
= (40 - d)/5 hr
On solving both equations, we get: 48 - d/6 = (40 - d)/5
Solving this equation, we get d = 12 km.
Distance travelled by B on the bicycle = d
= 12 km
Time taken by B to travel the distance d on the bicycle= Distance/Speed
= d/15
= 12/15
= 0.8 hr
So, the bicycle was left unused for 0.8 hours or 48 minutes. Hence, the correct option is (a) The average speed of Tourist A is 5 km/hr and that of Tourist B is 9 km/hr. (b) The bicycle was left unused for 48 minutes.
To know more about average speed, refer
https://brainly.com/question/4931057
#SPJ11
The A RC beam 250x500 mm (b x d) is required to carry a factored moment of 250 kN m. Considering M 20 and Fe 415 reinforcement: a. Determine the balanced singly reinforced moment of resistance of the given section b. Design the section by determining the adequate requirement of compression reinforcements. Take effective cover d' = 50 mm.
The adequate requirement of compression reinforcement is 1700 mm^2,
Given data: A RC beam 250x500 mm (b x d)Factored moment of resistance, M_u = 250 kN mM20 and Fe 415 reinforcement Effective cover,
d' = 50 mm To determine:
a. Balanced singly reinforced moment of resistance of the given section
b. Design the section by determining the adequate requirement of compression reinforcements a. Balanced singly reinforced moment of resistance of the given section Balanced moment of resistance, M_bd^2
= (0.87 × f_y × A_s) (d - (0.42 × d)) +(0.36 × f_ck × b × (d - (0.42 × d)))
Where, A_s = Area of steel reinforcement f_y = Characteristic strength of steel reinforcementf_ck
= Characteristic compressive strength of concrete.
Using the given values, we get;
M_b = (0.87 × 415 × A_s) (500 - (0.42 × 500)) +(0.36 × 20 × 250 × (500 - (0.42 × 500)))
M_b = 163.05 A_s + 71.4
Using the factored moment of resistance formula;
M_u = 0.87 × f_y × A_s × (d - (a/2))
We get the area of steel, A_s;
A_s = (M_u)/(0.87 × f_y × (d - (a/2)))
Substituting the given values, we get;
A_s = (250000 N-mm)/(0.87 × 415 N/mm^2 × (500 - (50/2) mm))A_s
= 969.92 mm^2By substituting A_s = 969.92 mm^2 in the balanced moment of resistance formula,
we get; 163.05 A_s + 71.4
= 250000N-mm
By solving the above equation, we get ;A_s = 1361.79 mm^2
The balanced singly reinforced moment of resistance of the given section is 250 kN m.b. Design the section by determining the adequate requirement of compression reinforcements. The design of the section includes calculating the adequate requirement of compression reinforcements.
The formula to calculate the area of compression reinforcement is ;A_sc = ((0.36 × f_ck × b × (d - a/2))/(0.87 × f_y)) - A_s
By substituting the given values, we get; A_sc = ((0.36 × 20 × 250 × (500 - 50/2))/(0.87 × 415 N/mm^2)) - 1361.79 mm^2A_sc
= 3059.28 - 1361.79A_sc
= 1697.49 mm^2Approximate to the nearest value, we get;
A_sc = 1700 mm^2
To know more about compression visit:
https://brainly.com/question/22170796
#SPJ11
Television Advertising As Sales Manager for Montevideo Productions, Inc., you are planning to review the prices you charge clients for television advertisement development. You currently charge each client an hourly development fee of $2,900. With this pricing structure, the demand, measured by the number of contracts Montevideo signs per month, is 11 contracts. This is down 5 contracts from the figure last year, when your company charged only $2,400. (a) Construct a linear demand equation giving the number of contracts a as a function of the hourly fee p Montevideo charges for development. 960) - (b) On average, Montevideo bills for 40 hours of production time on each contract. Give a formula for the total revenue obtained by charging $p per hour. R(D) - (c) The costs to Montevideo Productions are estimated as follows. Fixed costs: $140,000 per month Variable costs: $70,000 per contract Express Montevideo Productions' monthly cost as a function of the number of contracts. ca) - Express Montevideo Productions monthly cost as a function of the hourly production charge p. Cip) = (d) Express Montevideo Productions' monthly profit as a function of the hourly development fee p. Pp) - Find the price it should charge to maximize the profit (in dollars per hour). ps per hour
To find the hourly development fee (p) that maximizes the profit, you would need to analyze the profit function and determine the value of p that yields the maximum result.
The linear demand equation giving the number of contracts (a) as a function of the hourly fee (p) charged by Montevideo Productions can be represented as: a = m * p + b
Given that the demand is currently 11 contracts when the fee is $2,900 and it was 5 contracts higher at $2,400, we can find the values of m and b. Using the two data points:
(2900, 11) and (2400, 16)
m = (11 - 16) / (2900 - 2400) = -1/100
b = 16 - (2400 * (-1/100)) = 40
Therefore, the linear demand equation is:
a = (-1/100) * p + 40
(b) The formula for the total revenue (R) obtained by charging $p per hour and billing for 40 hours of production time on each contract is:
R = p * 40 * a
Substituting the demand equation, we get:
R = p * 40 * ((-1/100) * p + 40)
(c) The monthly cost (C) for Montevideo Productions can be expressed as a function of the number of contracts (a) as follows:
C = Fixed costs + (Variable costs per contract * a)
Given: Fixed costs = $140,000 per month
Variable costs per contract = $70,000
So, the monthly cost function is:
C(a) = $140,000 + ($70,000 * a)
(d) The monthly profit (P) for Montevideo Productions can be calculated by subtracting the monthly cost (C) from the total revenue (R):
P(p) = R - C(a)
Finally, to find the hourly development fee (p) that maximizes the profit, you would need to analyze the profit function and determine the value of p that yields the maximum result.
To learn more about profit:
https://brainly.com/question/32864864
#SPJ11
The number of significant digits is set to 3. The tolerance is
+-1 in the 3rd significant digit.
The 590-kg uniform I-beam supports the load shown. Determine the reactions at the supports. Answers: Ax= Ay= By= IM i i -5.5 m- 3.5 m 265 kg B N N N
We are supposed to determine the reactions at the supports of the 590-kg uniform I-beam supporting the load shown given that the number of significant digits is set to 3 and the tolerance is +-1 in the 3rd significant digit.
To do this, we'll use the principle of statics as follows: Resolve for the horizontal direction:∑Fx = 0Ax - 1700 = 0Ax = 1700 N∑Fy = 0Ay - 265 - 590 - By = 0Ay - By = 855 N Again, resolving for the vertical direction gives:∑Fy = 0Ay + By - 590 - 265 = 0Ay + By = 855 + 855Ay + By = 1710 N Finally, using the moment about point A, we have:∑MA = 0Ay (5.5) - By (3.5) - (265) (1.7) = 0Ay (5.5) - By (3.5) = 505.5Ay (5.5) - By (3.5) = 505.5Again, summing the forces along the horizontal direction,
we have: Ax = 1700 NFor vertical forces, we have: Ay + By = 1710 NFor moments, we have:Ay (5.5) - By (3.5) = 505.5The resultant reactions at the supports are:Ax = 1700 NAy = 1273 NBy = 437 N (rounded to 3 significant figures due to the tolerance limit)Therefore, the answers are:Ax= 1700 N Ay= 1273 N By= 437 N.
To know more about determine visit:
https://brainly.com/question/29898039
#SPJ11
An athlete standing west of a river flowing from north to south at 0.4 m/s and
is 72 m wide swims at 16.2° to the Southeast and takes 1 minute 40 seconds to
go through it
a) Using the formula for the speed, the width of the river and the time in seconds that
the athlete takes to cross the river, calculate the horizontal component (East direction) of
the speed of the swimmer.
b) Using the horizontal component of the swimmer's velocity and the angle of the
swimmer speed, calculates the speed of the swimmer without the drag of the river
(remember that it is a vector and must have express its speed and direction).
c) Using the component vector addition method, calculate the vector of
resultant speed of the swimmer being dragged down the river, that is, the sum of
the velocity vectors of the swimmer and the river. For this, you can support yourself with the
example shown in topic 3.1.2. "Vector Addition" from Unit 1 of the
Extensive content.
d) With the value of the time it takes for the athlete to cross the river and the resulting speed,
get the total displacement vector.
f) If the athlete swam at 30° in the direction shown in the following graph, what
should be its speed so that it reaches the opposite bank of the river without being caught by the river.
drag?
g) If its speed were less than the speed calculated in the previous section, but greater
than the 0.4 m/s of the river current. What should you do with the direction of your swim?
so as not to be swept away by the river? Could you avoid it if your speed were less than 0.4 m/s?
Justify your answer.
To find the horizontal component (East direction) of the speed of the swimmer, use the formula given below: Horizontal component of velocity = (Width of the river / Time taken to cross the river) x cos(θ)Width of the river, w = 72 mTime taken to cross the river, t = 1 minute 40 seconds = 100 secondsθ = 16.2°Horizontal component of velocity = (72/100) x cos(16.2°) = 0.67 m/sb).
To calculate the speed of the swimmer without the drag of the river, use the formula given below: Velocity of the swimmer without the drag of the river = √[(Horizontal component of velocity)² + (Vertical component of velocity)²]The vertical component of velocity is given by Vertical component of velocity = (Width of the river / Time taken to cross the river) x sin(θ)Vertical component of velocity = (72/100) x sin(16.2°) = 0.30 m/sVelocity of the swimmer without the drag of the river = √[(0.67)² + (0.30)²] = 0.73 m/s.
The component vector addition method can be used to calculate the vector of resultant speed of the swimmer being dragged down the river, that is, the sum of the velocity vectors of the swimmer and the river. For this, draw a diagram as shown below:Vector addition diagram Horizontal component of the velocity of the river = 0 m/sVertical component of the velocity of the river = 0.4 m/sTherefore, the velocity vector of the river is 0.4 m/s at 90° to the East direction.The velocity vector of the swimmer without the drag of the river is 0.73 m/s at an angle of 24.62° to the East direction.Using the component vector addition method, the vector of the resultant velocity of the swimmer being dragged down the river can be found as follows
To know more about swimmer visit :
https://brainly.com/question/32123193
#SPJ11
(12%) Problem 8: Three electric charges, Q1 = 0 C.Q₂=4C, and Q3 =-10 C, are presented in the figure, with 5 surfaces, S1 through S5. ,20% Part (a) Write an expression for the electric flux D, throug
Three electric charges, Q1 = 0 C.Q₂=4C, and Q3 =-10 C, are presented in the figure, with 5 surfaces, S1 through S5.Part (a) Write an expression for the electric flux D, through surface S2.
The electric flux D through surface S2 is given by,Φ = ∫EdAHere, dA represents the area vector, E represents the electric field vector and Φ represents the electric flux. Using Gauss's Law, the expression for electric flux through surface S2 is given by,Φ₂ = ∫E₂.dA₂ = D₂.A₂Here, D₂ represents the electric flux density or electric flux per unit area and A₂ represents the area of surface S2. Hence, the main answer is,D₂ = Qenc₂ / ε₀ where, Qenc₂ represents the charge enclosed within surface S2 and ε₀ represents the permittivity of free space.Explanation:The given figure is shown below,Figure 1 The electric charges and the surfacesThe electric field vector due to charge Q1 is zero, since Q1 = 0. The electric field vector due to charges Q2 and Q3 are shown in the figure below,Figure 2 The electric field vectors due to charges Q2 and Q3Since charge Q2 is positive,
the electric field lines are radially outward from charge Q2. Hence, the electric flux through surface S2 is positive. On the other hand, charge Q3 is negative, the electric field lines are radially inward towards charge Q3. Hence, the electric flux through surface S4 is negative.Now, using Gauss's law, the electric flux through surface S2 is given by,Φ₂ = ∫E₂.dA₂ = D₂.A₂where, D₂ represents the electric flux density or electric flux per unit area and A₂ represents the area of surface S2. The electric field vector due to charge Q2 is constant on surface S2 and has the same magnitude at all points on surface S2. Hence, the electric flux density D₂ due to charge Q2 is given by,D₂ = E₂ / ε₀Here, ε₀ represents the permittivity of free space, which is given by ε₀ = 8.85 x 10-12 C2 / N.m2. The electric field vector E₂ due to charge Q2 is given by,E₂ = (1 / 4πε₀) (Q₂ / r²)where, r represents the distance between charge Q2 and surface S2. Hence, the electric flux density D₂ due to charge Q2 is given by,D₂ = (Q₂ / 4πε₀r²)The charge Qenc₂ enclosed within surface S2 is given by,Qenc₂ = Q₂ = 4 CSubstituting this in the expression for D₂, we get,D₂ = (Qenc₂ / 4πε₀r²)Thus, the expression for electric flux through surface S2 is given by,Φ₂ = D₂.A₂ = (Qenc₂ / 4πε₀r²) . A₂
TO know more about that electric visit:
https://brainly.com/question/31173598
#SPJ11
Consider an ideal gas of N identical (indistinguishable) monoatomic particles contained in a d- dimensional box of volume "V ". Consider a microcanonical ensemble with total energy E. a) Show that the
Consider an ideal gas of N identical (indistinguishable) monoatomic particles contained in a d-dimensional box of volume "V". Consider a microcanonical ensemble with total energy E. Show that the entropy S is given by : $S=k_B\ln\Biggl(\frac
{V^N}{N!}\biggl(\frac{4\pi m E}{3Nh^2}\biggr)^{\frac{3N}{2}}\Biggr)+S_0$, where $S_0$ is a constant term. The entropy S can be calculated by using the formula, $S=k_B\ln W$, where W is the number of ways the system can be arranged at the given energy E, volume V and number of particles N.Let the volume of the d-dimensional box be $V=V_1.V_2.V_3....V_d$Let the energy of each particle be $\epsilon$The total energy of the system is given as,E = NEnergy of each particle,$\epsilon=\frac{p^2}{2m}$,
where p is the momentum of the particle.The volume of the momentum space is $\frac{4\pi p^2dp}{h^3}$By the relation between momentum and energy,$\epsilon=\frac{p^2}{2m}$,we get the volume of the energy space to be,$\frac{V}{h^{3N}}\int_0^{\sqrt{2mE}}\frac{(4\pi p^2dp)}{h^{3N}}=\frac{V(4\pi m E)^{\frac{3N}{2}}}{(3N)!h^{3N}}$We know that the number of ways N identical particles can be arranged in V volume is given by,$\frac{V^N}{N!}$Therefore, the total number of arrangements the system can be, is given as,$W=\frac{V^N}{N!}\frac{V(4\pi m E)^{\frac{3N}{2}}}{(3N)!h^{3N}}$$W=\frac{V^N}{N!}\biggl(\frac{4\pi m E}{3Nh^2}\biggr)^{\frac{3N}{2}}$By substituting this in the formula for entropy we get,$S=k_B\ln\Biggl(\frac{V^N}{N!}\biggl(\frac{4\pi m E}{3Nh^2}\biggr)^{\frac{3N}{2}}\Biggr)+S_0$, where $S_0$ is a constant term.
TO know more about that monoatomic visit:
https://brainly.com/question/29143691
#SPJ11
1. a) Depending on the dye, determine the range(s) of wavelength
where the sample allows most of the light to pass through with
minimum adsorption. Do the wavelengths agree with the colour of the
samp
1. a) Depending on the dye, determine the range(s) of wavelength where the sample allows most of the light to pass through with minimum adsorption.
Do the wavelengths agree with the colour of the sample?
The range of wavelengths that a sample allows most of the light to pass through with minimal absorption is referred to as the maximum absorption wavelength (λmax).
When λmax is lower, a greater proportion of the light has been absorbed; when λmax is higher, a lower proportion of the light has been absorbed, which means that the sample appears more transparent.
The wavelength range is dependent on the sample's dye, with each dye having a different wavelength range.
The wavelengths agreed with the sample's color, indicating that the color of the sample is a result of its dye's maximum absorption wavelength (λmax).
The wavelength range is dependent on the sample's dye, with each dye having a different wavelength range.
The wavelengths agreed with the sample's color, indicating that the color of the sample is a result of its dye's maximum absorption wavelength (λmax).
To know more about wavelength, visit:
https://brainly.com/question/31322456
#SPJ11
part 1 and 2
Item 10 Pegs A and B are restricted to move in the elliptical slots due to the motion of the slotted tnk. Eguts. Figure 1 of 1 10mA If the link moves with a constant speed of 10 m/s, determine the mag
The given problem can be solved with the help of the concept of velocity analysis of mechanisms.
The velocity analysis helps to determine the velocity of the different links of a mechanism and also the velocity of the different points on the links of the mechanism. In order to solve the given problem, the velocity analysis needs to be performed.
The velocity of the different links and points of the mechanism can be found as follows:
Part 1: Velocity of Link 2 (AB)
The velocity of the link 2 (AB) can be found by differentiating the position vector of the link. The link 2 (AB) is moving in the elliptical slots, and therefore, the position vector of the link can be represented as the sum of the position vector of the center of the ellipse and the position vector of the point on the link (i.e., point A).
The position vector of the center of the ellipse is given as:
OA = Rcosθi + Rsinθj
The position vector of point A is given as:
AB = xcosθi + ysinθj
Therefore, the position vector of the link 2 (AB) is given as:
AB = OA + AB
= Rcosθi + Rsinθj + xcosθi + ysinθj
The velocity of the link 2 (AB) can be found by differentiating the position vector of the link with respect to time.
Taking the time derivative:
VAB = -Rsinθθ'i + Rcosθθ'j + xθ'cosθ - yθ'sinθ
The magnitude of the velocity of the link 2 (AB) is given as:
VAB = √[(-Rsinθθ')² + (Rcosθθ')² + (xθ'cosθ - yθ'sinθ)²]
= √[R²(θ')² + (xθ'cosθ - yθ'sinθ)²]
Therefore, the magnitude of the velocity of the link 2 (AB) is given as:
VAB = √[(0.4)²(10)² + (0.3 × (-0.5) × cos30 - 0.3 × 0.866 × sin30)²]
= 3.95 m/s
Therefore, the magnitude of the velocity of the link 2 (AB) is 3.95 m/s.
Part 2: Velocity of Point A
The velocity of point A can be found by differentiating the position vector of point A. The position vector of point A is given as:
OA + AB = Rcosθi + Rsinθj + xcosθi + ysinθj
The velocity of point A can be found by differentiating the position vector of point A with respect to time.
Taking the time derivative:
VA = -Rsinθθ'i + Rcosθθ'j + xθ'cosθ - yθ'sinθ + x'cosθi + y'sinθj
The magnitude of the velocity of point A is given as:
VA = √[(-Rsinθθ' + x'cosθ)² + (Rcosθθ' + y'sinθ)²]
= √[(-0.4 × 10 + 0 × cos30)² + (0.4 × cos30 + 0.3 × (-0.5) × sin30)²]
= 0.23 m/s
Therefore, the magnitude of the velocity of point A is 0.23 m/s.
To learn more about analysis, refer below:
https://brainly.com/question/33120196
#SPJ11
A point charge Q with charge 10 nC is located at (3,-1,4) meters in free space. An infinite grounded conductor plate is placed along the x = y plane as shown in the figure. Calculate the potential (V) at point P(1,-1,2) meters.
To calculate the potential at point P due to the point charge and the grounded conductor plate, we need to consider the contributions from both sources.
Potential due to the point charge:
The potential at point P due to the point charge Q can be calculated using the formula:
V_point = k * Q / r
where k is the electrostatic constant (9 x 10^9 N m^2/C^2), Q is the charge (10 nC = 10 x 10^-9 C), and r is the distance between the point charge and point P.
Using the coordinates given, we can calculate the distance between the point charge and point P:
r_point = sqrt((x2 - x1)^2 + (y2 - y1)^2 + (z2 - z1)^2)
r_point = sqrt((1 - 3)^2 + (-1 - (-1))^2 + (2 - 4)^2)
r_point = sqrt(4 + 0 + 4)
r_point = sqrt(8)
Now we can calculate the potential due to the point charge at point P:
V_point = (9 x 10^9 N m^2/C^2) * (10 x 10^-9 C) / sqrt(8)
Potential due to the grounded conductor plate:
Since the conductor plate is grounded, it is at a constant potential of 0 V. Therefore, there is no contribution to the potential at point P from the grounded conductor plate.
To calculate the total potential at point P, we can add the potential due to the point charge to the potential due to the grounded conductor plate:
V_total = V_point + V_conductor
V_total = V_point + 0
V_total = V_point
So the potential at point P is equal to the potential due to the point charge:
V_total = V_point = (9 x 10^9 N m^2/C^2) * (10 x 10^-9 C) / sqrt(8)
By evaluating this expression, you can find the numerical value of the potential at point P.
To learn more about, conductor plate, click here, https://brainly.com/question/31780417
#SPJ11
A Steel steam pipe is covered with insulation having a thermal conductivity of 1 W/m.C. If the convection heat transfer coefficient between the surface of insulation and the surrounding air is 8 W/m².²C, then the critical radius of insulation in cm a. 10 b. 11 c. 12.5 d. 25 e. 8
The critical radius of insulation is 11 cm (option b).
The critical radius of insulation can be determined using the concept of critical radius of insulation. The critical radius is the radius at which the heat transfer through convection from the outer surface of the insulation equals the heat transfer through conduction through the insulation material.
The heat transfer rate through convection is given by:
Q_conv = h * A * (T_s - T_inf)
Where:
Q_conv is the heat transfer rate through convection,
h is the convective heat transfer coefficient,
A is the surface area of the insulation,
T_s is the temperature of the surface of the insulation, and
T_inf is the ambient temperature.
The heat transfer rate through conduction is given by:
Q_cond = (k / L) * A * (T_s - T_inf)
Where:
Q_cond is the heat transfer rate through conduction,
k is the thermal conductivity of the insulation material,
L is the thickness of the insulation, and
A is the surface area of the insulation.
At the critical radius, Q_conv = Q_cond. Therefore, we can set the two equations equal to each other and solve for the critical radius.
h * A * (T_s - T_inf) = (k / L) * A * (T_s - T_inf)
Simplifying the equation:
h = k / L
Rearranging the equation to solve for L:
L = k / h
Substituting the given values:
L = 1 W/m.C / 8 W/m².°C = 0.125 m = 12.5 cm
Therefore, the critical radius of insulation is 12.5 cm (option c).
The critical radius of insulation for the steel steam pipe with the given thermal conductivity of 1 W/m.C and convection heat transfer coefficient of 8 W/m².°C is 12.5 cm.
To know more about insulation visit,
https://brainly.com/question/29346083
#SPJ11
3. 0.050 moles of a monatomic gas expands adiabatically and quasistatically from 1.00 liters to 2.00 liters. The initial pressure of the gas is 155 kPa. (a) What is the initial temperature of the gas?
The initial temperature of the gas is 374 K or 101°C approximately.
Given that the amount of a monatomic gas is 0.050 moles which is expanding adiabatically and quasistatically from 1.00 L to 2.00 L.
The initial pressure of the gas is 155 kPa. We have to calculate the initial temperature of the gas. We can use the following formula:
PVγ = Constant
Here, γ is the adiabatic index, which is 5/3 for a monatomic gas. The initial pressure, volume, and number of moles of gas are given. Let’s use the ideal gas law equation PV = nRT and solve for T:
PV = nRT
T = PV/nR
Substitute the given values and obtain:
T = (155000 Pa) × (1.00 L) / [(0.050 mol) × (8.31 J/molK)] = 374 K
To know more about monatomic gas visit:
https://brainly.com/question/30509804
#SPJ11
6. What is the uncertainty in position of a proton with mass 1.673 x 10-27 kg and kinetic energy 1.2 keV?
According to Heisenberg's Uncertainty Principle, it is impossible to determine the position and momentum of a particle with absolute certainty at the same time. The Uncertainty Principle is defined as Δx * Δp ≥ h/4π, where Δx is the uncertainty in position, Δp is the uncertainty in momentum, and h is Planck's constant.
For the given problem, the uncertainty in position of a proton with mass 1.673 x 10-27 kg and kinetic energy 1.2 keV can be calculated as follows:
We know that the momentum p of a particle is given by p = mv, where m is the mass of the particle and v is its velocity.
The kinetic energy of the proton can be converted to momentum using the equation E = p²/2m, where E is the kinetic energy.
1.2 keV = (p²/2m) (1 eV = 1.6 x 10^-19 J)
p²/2m = 1.92 x 10^-16 J
The momentum p of the proton can be calculated by taking the square root of both sides:
p = √(2mE) = √(2 x 1.673 x 10^-27 x 1.6 x 10^-16) = 7.84 x 10^-22 kg m/s
Using Heisenberg's Uncertainty Principle, we can calculate the uncertainty in position as follows:
Δx * Δp ≥ h/4π
Δx ≥ h/4πΔp
Substituting the values of h, Δp, and solving for Δx:
Δx ≥ (6.626 x 10^-34)/(4π x 7.84 x 10^-22)
Δx ≥ 2.69 x 10^-12 m
Therefore, the uncertainty in position of the proton is 2.69 x 10^-12 m.
To know more about momentum visit:-
https://brainly.com/question/30677308
#SPJ11
Please show solutions with
complete FBD diagram thank you! Will upvote!
As a train accelerates uniformly it passes successive 800 meter marks while traveling at velocities of 3 m/s and then 12 m/s. [Select] what is the acceleration of the train in m/s². [Select] (a) For
The acceleration of the train is approximately 0.0844 m/s².
Let's solve the problem step by step and include a free-body diagram (FBD) for clarity.
Initial velocity (u) = 3 m/s
Final velocity (v) = 12 m/s
Distance traveled (s) = 800 m
To find the acceleration of the train, we can use the equation:
v² = u² + 2as
where:
v = final velocity
u = initial velocity
a = acceleration
s = distance traveled
Step 1: FBD
In this case, we don't need a free-body diagram as we are dealing with linear motion and the forces acting on the train are not relevant to finding acceleration.
Step 2: Calculation
Substituting the given values into the equation, we have:
(12 m/s)² = (3 m/s)² + 2a(800 m)
144 m²/s² = 9 m²/s² + 1600a
Subtracting 9 m²/s² from both sides:
135 m²/s² = 1600a
Dividing both sides by 1600 m:
a = 135 m²/s² / 1600 m
a ≈ 0.0844 m/s²
To know more about acceleration refer to-
https://brainly.com/question/2303856
#SPJ11
El Nino occurs when the trade winds stop blowing from east to west. True False Question 37 2 pts Atmospheric CO2 measurements now indicate that we have reached over 400 parts per million (PPM). Due to our current utilization and dependence on fossil fuels (especially coal), it is extremely unlikely that we will observe atmospheric CO2 below 400 pprn again. True False Question 38 2 pts Consequences related with climate change include: Surface temperatures are setting new heat records about each year More extreme weather like droughts, heat waves, and hurricanes All of these answers are correct Global sea levels are rising at an alarmingly fast rate. The ice sheets are declining, glaciers are in retreat globally, and our oceans are more acidic than ever
El Niño is a climate phenomenon that occurs when the trade winds, which blow from east to west across the equatorial Pacific Ocean, weaken or even reverse their direction. This reversal leads to changes in oceanic and atmospheric circulation patterns, impacting weather patterns around the world is true.
During El Niño, the weakened trade winds disrupt the normal upwelling of cold, nutrient-rich waters in the eastern Pacific, resulting in warmer surface waters in the central and eastern equatorial Pacific. These warm waters can influence weather patterns, leading to various effects such as increased rainfall in some regions and drought conditions in others.
Therefore, the statement that El Niño occurs when the trade winds stop blowing from east to west is true. It is the weakening or reversal of the trade winds that characterizes the onset of El Niño conditions.
El Niño events have significant impacts on global weather patterns, affecting precipitation, temperature, and storm systems. Understanding and monitoring El Niño is important for climate prediction and preparedness, as it can have far-reaching consequences for ecosystems, agriculture, and human populations in different parts of the world.
To know more about nutrient-rich waters refer here:
https://brainly.com/question/32930050#
#SPJ11
i
need the solution to part d) e) and f) - i have included the
solution to the previous parts - i have already had a chegg
"expert" banned for simply answering with the previous parts i
gave.
. A dynamical system is composed of two bodies of masses m₁ and m2, which are placed on a horizontal non-smooth surface, and three springs with Hooke's constants ka, k and ke, respectively, as shown
Given a dynamical system that is composed of two masses placed on a non-smooth surface. Let m1 and m2 be the mass of the first and the second body respectively. The three springs attached to the dynamical system have Hook's constant ka, k and ke respectively. The figure of the system is given below:
The block m1 is connected to m2 through a massless spring having Hook's constant k. Also, the block m1 is connected to a fixed point through a massless spring having Hook's constant ka. Furthermore, the block m2 is connected to a fixed point through a massless spring having Hook's constant ke. The initial compression of the spring is shown as Δx1 for the spring with Hook's constant ka. Δx2 is the initial compression of the spring having Hook's constant k and Δx3 is the initial compression of the spring having Hook's constant ke.
Part d)
We need to find the equations of motion for the masses m1 and m2. Let x1 be the displacement of the first mass and x2 be the displacement of the second mass from their equilibrium positions. Hence, the forces acting on the blocks are as follows:
The force acting on m1 due to the spring having Hook's constant ka is equal to -ka(x1 - Δx1). The negative sign denotes that the force is opposite to the displacement. Similarly, the force acting on m1 due to the spring having Hook's constant k is equal to -k(x1 - x2 - Δx2) and the force acting on m2 due to the spring having Hook's constant ke is equal to -ke(x2 - Δx3).
We know that the force acting on a body is equal to its mass times acceleration. Hence, the equations of motion for the two blocks are as follows:
m1(x1)'' + ka(x1 - Δx1) + k(x1 - x2 - Δx2) = 0 ......(1)
m2(x2)'' + ke(x2 - Δx3) - k(x1 - x2 - Δx2) = 0 ......(2)
Part e)
We need to derive the eigenvalue problem of the given system of equations. We assume that the solutions for the displacement of the blocks are of the form x1 = A1eiωt and x2 = A2eiωt. Hence, substituting these values in the equations of motion given in equations (1) and (2), we get the following:
(-m1ω² + ka + k)A1 - kA2 = 0
-kA1 + (-m2ω² + k + ke)A2 = 0
The above two equations can be written in matrix form as AX = 0, where A is the coefficient matrix and X is the solution matrix given as X = [A1, A2]. The eigenvalue equation is given by det(A - λI) = 0. Here, λ is the eigenvalue and I is the identity matrix. Hence, the eigenvalue equation is as follows:
(m1ω² - ka - k) (m2ω² - k - ke) - k² = 0
Part f)
We need to find the normal mode frequencies of the system of masses. We can obtain the normal mode frequencies by solving the eigenvalue equation obtained in part e) using the quadratic formula. The normal mode frequencies are given by the following expression:
ω₁² = [(k + ka + ke) ± √((k + ka + ke)² - 4(k² + ka.ke))]/(2m1m2)
The above expression gives the two normal mode frequencies. Hence, the normal mode frequencies of the system of masses are given by the above equation.
To know more about constant visit:
https://brainly.com/question/31730278
#SPJ11
Determine the maximum constant speed at which the pilot can travel around the vertical curve having a radius of curvature p = 800 m, so that he experiences a maximum acceleration an = 8g = 78.5 m/s2. If he has a mass of 70 kg, determine the normal force he exerts on the seat of the airplane when the plane is traveling at this speed and is at its lowest point.
The maximum constant speed at which the pilot can travel around the vertical curve with a radius of curvature of
p = 800 m so that he experiences a maximum acceleration of
an = 8g = 78.5 m/s2 is 89.4 m/s.
Given data:
Radius of curvature p = 800 m
Maximum acceleration an = 8g = 78.5 m/s²
Mass of the pilot m = 70 kg
Maximum speed v for the plane is given as follows:
an = (v²) / pm
g = (v²) / p78.5 m/s²
= (v²) / (800 m)
where v is the velocity and an is the maximum acceleration Let's solve the above equation for v to determine the maximum constant speed:
v² = 78.5 m/s² × 800
mv² = 62800
v = √62800
v = 250.96 m/s
The pilot can travel at a maximum speed of 250.96 m/s
to experience a maximum acceleration of 8g if we consider the theory of relativistic mass increasing with speed.
So we need to lower the speed to achieve 8g.
For a safe speed, let's take 80% of the maximum speed; 80% of 250.96 m/s = 200.768 m/s
Therefore, the maximum constant speed that the pilot can travel around the vertical curve having a radius of curvature p = 800 m,
so that he experiences a maximum acceleration an = 8g = 78.5 m/s2, is 200.768 m/s.
When the plane is traveling at this speed and is at its lowest point, the normal force he exerts on the seat of the airplane is;
N = m(g + an)
Here, m = 70 kg, g = 9.81 m/s²,
and an = 78.5 m/s²
N = (70 kg)(9.81 m/s² + 78.5 m/s²)
N = 5662.7 N (approx)
Therefore, the normal force the pilot exerts on the seat of the airplane when the plane is traveling at the maximum constant speed and is at its lowest point is 5662.7 N.
To know more about constant visit:
https://brainly.com/question/31730278
#SPJ11
a. Calculate the Tisserand parameter for a comet encountering Mars with a peri-apsis distance of 3.53 AU, an eccentricity of 0.58, and an inclination of 6.2 degrees. Semi-major axis of Mars is 1.54 AU
The Tisserand parameter for the comet encountering Mars is approximately 0.179.
The Tisserand parameter (T) is a useful quantity in celestial mechanics that helps determine the relationship between the orbits of two celestial bodies. It is defined as the ratio of two important quantities: the semi-major axis of the target body (in this case, Mars) and the sum of the peri-apsis distance and twice the target body's semi-major axis.
The Tisserand parameter (T) is calculated using the following formula:[tex]T = a_target / (a_target + 2 * r_p)[/tex]
Where:
T: Tisserand parameter
a_target: Semi-major axis of the target body (Mars)
r_p: Peri-apsis distance of the comet's orbit around Mars
Given the values:
Semi-major axis of Mars (a_target) = 1.54 AU
Peri-apsis distance of the comet (r_p) = 3.53 AU
Eccentricity of the comet (e) = 0.58
Using the formula, we can calculate the Tisserand parameter as follows:
T = 1.54 AU / (1.54 AU + 2 * 3.53 AU)
Simplifying the expression:
T = 1.54 AU / (1.54 AU + 7.06 AU)
T = 1.54 AU / 8.60 AU
T = 0.179
Learn more about Tisserand
https://brainly.com/question/33288803
#SPJ11