Answers
if you just look up the answer it comes up btw!!
have a great day
Related Questions
trioxocarbonate iv acid
Answers
Answer:
Trioxocarbonate (iv) are salts derived from trioxocarbonate (iv) acid when it reacts with metals and metallic oxides. All trioxocarbonate (iv) salts of Sodium (Na), Potassium (K) and Ammonium(NH4+) are soluble while all others are insoluble.
Please help I beg you
Answers
Answer:
is highly respect is correct I promise!
Why is Mg++ smaller than Mg atom?
Answers
Answer:
The magnesium ion is much smaller than the magnesium atom because magnesium atom contains more electrons as compared to magnesium ion. Explanation: ... Whereas when an atom tends to lose an electron then it acquires a positive charge and size of the atom tends to increase.
Answer:
Because it looses it two electrons to form a stable octet Ionic form..........
Determine the volume (mL) of 15.0 M sulfuric acid needed to react with 45.0 g of
aluminum to produce aluminum sulfate.
Answers
Answer:
167 mL.
Explanation:
We'll begin by calculating the number of moles in 45 g of aluminum (Al). This can be obtained as follow:
Mass of Al = 45 g
Molar mass of Al = 27 g/mol
Mole of Al =?
Mole = mass /Molar mass
Mole of Al = 45/27
Mole of Al = 1.67 moles
Next, the balanced equation for the reaction. This is given below:
2Al + 3H2SO4 → Al2(SO4)3 + 3H2
From the balanced equation above,
2 moles of Al reacted with 3 moles of H2SO4.
Next, we shall determine the number of mole of H2SO4 needed to react with 45 g (i.e 1.67 moles) of Al. This can be obtained as:
From the balanced equation above,
2 moles of Al reacted with 3 moles of H2SO4.
Therefore, 1.67 moles of Al will react with = (1.67 × 3)/2 = 2.505 moles of H2SO4.
Thus 2.505 moles of H2SO4 is needed for the reaction.
Next, we shall determine the volume of H2SO4 needed for the reaction. This can be obtained as follow:
Molarity of H2SO4 = 15.0 M
Mole of H2SO4 = 2.505 moles
Volume =?
Molarity = mole /Volume
15 = 2.505 / volume
Cross multiply
15 × volume = 2.505
Divide both side by 15
Volume = 2.505/15
Volume = 0.167 L
Finally, we shall convert 0.167 L to mL. This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.167 L = 0.167 L × 1000 mL / 1 L
0.167 L = 167 mL
Thus, 0.167 L is equivalent to 167 mL.
Therefore, 167 mL H2SO4 is needed for the reaction.
Sulfur has an electronegativity of 2.58, while Cesium has a value of 0.79. Based on this information, they would have what kind of chemical bond?
Answers
Answer:
Ionic
Explanation:
Because sulphur is a non-metal and cesium is part of the group 1 Alkali Metals, this creates an ionic bond
Ionic bonds are created from one metal and one non-metal element.
This still is declared as Ionic despite the balance of this is Cs2S
A 11.1-g sample of granite initially at 76.0°C is immersed into 22.0 g of water initially at 22.0°C. What is the final temperature of both substances when they reach thermal equilibrium? (For water, Cs=4.18J/g⋅∘C and for granite, Cs=0.790J/g⋅∘C.)
Answers
Answer:
[tex]T_f=26.7\°C[/tex]
Explanation:
Hello.
In this case, when two substances at different temperature are placed in contact in an isolated container, we can say that the heat lost by the hot substance is gained by the cold substance. In such a way, since granite is at 76.0 °C and water at 22.0 °C we infer granite is hot and water is cold, so we write:
[tex]Q_{granite}=-Q_{water}[/tex]
In terms of mass, specific heat and change in temperature, we write:
[tex]m_{granite}C_{granite}(T_f-T_{granite})=-m_{water}C_{water}(T_f-T_{water})[/tex]
Thus, since the temperature is the same for both substance, we can solve for it as shown below:
[tex]T_f=\frac{m_{granite}C_{granite}T_{granite}+m_{water}C_{water}T_{water}}{m_{granite}C_{granite}+m_{water}C_{water}}[/tex]
By plugging in each variable, we obtain:
[tex]T_f=\frac{11.1g*0.790\frac{J}{g\°C} *76.0\°C+22.0g*4.18\frac{J}{g\°C} *22.0\°C}{11.1g*0.790\frac{J}{g\°C} +22.0g*4.18\frac{J}{g\°C}}\\\\T_f=26.7\°C[/tex]
Best regards!
How many electrons are in the nucleus of an atom with an atomic number of
16?
O None. Electrons are not in the nucleus
08
O 16
O 32
Answers
Answer:
None. Electrons are not in the nucleus.
Explanation:
We know that an atom consist of electrons, protons and neutrons. Neutrons and protons are present inside the nucleus while electrons are present out side the nucleus. Electron has a negative charge and is written as e⁻. The mass of electron is 9.10938356×10⁻³¹ Kg . While mass of proton and neutron is 1.672623×10⁻²⁷Kg and 1.674929×10⁻²⁷ Kg respectively.
Symbol of proton= P⁺
Symbol of neutron= n⁰
The number of electron or number of protons are called atomic number while mass number of an atom is sum of protons and neutrons. The umber of protons and electrons are always equal to make the atom electrically neutral .
The atom having atomic number 16 have 16 electrons and these electrons are present out side the nucleus.
Brad pushed a shopping cart directly toward his car at a constant velocity for 6.0 seconds.
During that time, Brad's daughter jogged past him at 2.4 meters per second, and the cart
moved 6.6 meters. What was the cart's velocity?
Answers
Answer:
Watch Naruto that's the answer
Explanation:
The density of a substance is 1.63 grams per milliliter. What is the volume, in ml, of a sample of the substance with a mass of 5.40Kg? 1000 g = 1 kg
Answers
Answer:
############################
Explanation:
What causes your skin to feel warm when it is in the sun on a summer day?
A Particles in the atmosphere reflect energy from the Sun downward.
B Hot particles from the Sun still carry some heat when they reach your skin.
C The solar wind carries heated air from the Sun's atmosphere to Earth's surface.
D The Sun radiates energy that passes through space and the atmosphere to your skin.
Answers
Answer:
idek akxkkwskkd nwkdkekekd
A sample is found to contain 2.98x10^-10 g of salt. Express this quantity in nanograms.
Answers
This quantity = 0.298 nanograms(ng)
Further explanationMass is one of the principal quantities, which is related to the matter in the object
The main mass unit consists of 7 units of other than other units of mass such as quintals, tons, pounds, ounces:
Kilogram, kg
Hectogram, hg
Decagram, dag
gram, g
Desigram, with
centigram, cg
milligram, mg
Each unit descends then multiplied by 10, and if one unit increases then divided by 10
Conversion of other mass units:
10⁻³ g ⇒mg-milligrams
10³ g ⇒kg-kilograms
10⁻⁶ g ⇒µg-micrograms (mcg)
10⁶ g ⇒Mg-megagrams (tons)
10⁻⁹ g ⇒ng-nanograms
10⁹ g ⇒Gg-gigagram
10⁻¹² g ⇒pg-pikogram
2.98 x 10⁻¹⁰ g to nanograms(ng)
[tex]\tt 2.98\times 10^{-10}\times 10^9=0.298~ng[/tex]
3. What is the pairing arrangement of the nitrogenous bases? _____________ pairs with __________ and ____________ pairs with ___________.
Answers
Answer:
Adenine pairs with thymine and guanine pairs with cytosine
What happens to the gravitational potential energy of an object if you bring it higher with respect to the ground? *
Answers
Answer:
Increases
Explanation:
The gravitational potential energy of an object increases as you bring it higher with respect to the ground.
Gravitational potential energy depends on the mass, height and gravity between two bodies;
Gravitational potential energy = mgh
m is the mass
g is the height
h is the height
We can clearly see that the higher the elevation, the more the value of the gravitational potential energy.J.J. Thomson's plum pudding model of the atom followed the discovery of
A)
negatively charged particles with a very small mass.
B)
positively charged particles with a very large mass.
0)
negative electrons that revolved around a positive nucleus.
D)
positively charged protons that were contained in a concentrated area.
Answers
J.J. Thomson's plum pudding model of the atom followed the discovery of negatively charged particles with a very small mass. Thus, the correct option for this question is A.
Who was J. J. Thomson?J.J. Thomson was a British physicist who discovered sub-atomic particles known as electrons within an atom. He also announced that atoms are made up of smaller components.
The plum pudding model is defined by Thomson in order to demonstrate that negatively charged sub-atomic particles known as electrons are surrounded by a volume of positively charged particles known as protons. It is one of the historical scientific model of the atom that governs all sorts of properties of sub-atomic particles.
Therefore, "negatively charged particles with a very small mass" is the discovery that follows J.J. Thomson's plum pudding model of the atom. Thus, the correct option for this question is A.
To learn more about the Plum pudding model, refer to the link:
https://brainly.com/question/4839193
#SPJ2
Which is a valid reason why total dissolved solids (TDS) cannot be accurately calculated by conductivity alone?
Global warming has significantly increased the conductivity of water.
Big blobs of algae do not conduct electricity.
Fish poop changes the conductivity.
Ionic compounds may behave differently based on ion characteristics (e.g. charge or size).
Some dissolved solids may be nonelectrolytes.
Answers
Answer:
The correct option is the last option (Some dissolved solids may be nonelectrolytes)
Explanation:
Total dissolved solids (TDS) cannot be calculated by conductivity alone because conductivity involves ionic charges and there are solids that dissolve in water but do not carry ionic charges (and thus form non-electrolytes). Examples include sucrose (common sugar) and glucose. These two solids will dissolve in water but would not form ions that will carry ionic charges which are responsible for conductivity. Thus, if TDS only depends solely on conductivity, then a solution that contains dissolved sucrose will be wrongly accounted for as the sucrose will be omitted from the dissolved substances.
A valid reason why total dissolved solids (TDS) cannot be accurately
calculated by conductivity alone because some dissolved solids may be
non-electrolytes.
Conductivity means the ability of electric current to pass through a
substance and an electrolyte has a high conductivity when dissolved in
water.
Dissolved solids can't be measured by conductivity because not all
dissolved solids are electrolytes.
Read more on https://brainly.com/question/19457008
Hat is the answer for this
Answers
Answer:
C
Explanation:
Answer:
I think is A
Explanation:
Hope it helps
The internal energy of reaction is -855.1). The reaction has a change of
temperature of 63.20°C that consist of 8.85g of material. Assume the
heat capacity of 2.650J/g °C. What is the work energy of this process..
Answers
The work energy of this process : 2337.298 J
Further explanationThe laws of thermodynamics 1 state that: energy can be changed but cannot be destroyed or created
ΔU=Q-W
Q=m.c.Δt
[tex]\tt Q=8.85\times 2.650\times 63.2=1482.198~J[/tex]
the work (W) :
[tex]\tt W=Q-\Delta U\\\\W=1482.198-(-855.1)=2337.298~J[/tex]
i need help ):
soo.. help me ! please (:
Answers
Slices of cheese
6 slices of bread
0 slices of cheese
I think this is right.
Hope this helps :)
Answer:
23 Sandwiches
6 slices of bread
0 slices of cheese
Explanation:
brainliest pls:)
11) Nitrogen oxides undergo many interesting reactions in the environment and in industry. Given the following information, calculate H for the overall equation:
2 NO2(g) + 1/2 O2(g) N2O5(s).
N2O5(s) 2 NO(g) + 3/2 O2(g), deltaH = 223.7 kJ
NO2(g) NO(g) + 1/2 O2(g), delataH = 57.1 kJ
delataH = ______kJ
12))))Write all coefficients, even if they are fractions or 1.)
(a) (Apply fractions as needed.)
______ _____(s) + ______ ______ (g) 5 NaCl(s)
(b) (Use the lowest possible coefficients.)
_______ _____ (s) + ______ _____(g) _____CaCl2(s)
(c) (Apply fractions as needed.)
_____ _____(g) _____O3(g)
(d) (Apply fractions as needed.)
______Mg(s) + _____ ______(s) + _____ ____(g) _____Mg3(PO4)2(s)
Answers
Answer:
one more time
Explanation:
shpuld i go
Everything in outer space including stars, planets, and galaxies
O A. Solar System
B. Universe
OC. Galaxy
D. Biosphere
I
Answers
Answer:
Universe.
Explanation:
Biosphere is just a planet. Solar system contains planets and star. Galaxy holds multiple solar systems only. Universe hold everything, biospheres, solar systems, and galaxies. I hope this helps :D
Answer:
B.
Explanation:
A solar system is IN a galaxy. Its not A.
A Galaxy doesnt have other galaxies in it. Its not c
A biosphere is only referring to earth. its not D.
Therefore, it is B. A universe is everything in outer space including stars, planets, and galaxies.
what do y'all girls find attractive on a guy?
Answers
Answer:
alot of things
Explanation:
Boron has two isotopes. Boron-10 which has a mass of 10.0129 and Boran-11 with a mass of 11.0093 occurs 52.69% of the time and B - 11 47.31% of the time. What is the average atomic mass of boron?
Help me
Answers
Answer:
Copper, a metal known since ancient times, is used in electrical cables and pennies, among other things. ... Calculate the average atomic mass of copper. ... The atomic masses of the two stable isotopes of boron 10B (19.78%) and 11B (80.22%) are 10.0129 amu ... (.1978)(10.0129 amu) + (.8022)(11.0093 amu) =10.81 amu.
Explanation:
I hope I help :)
Which describes a speed?
O A. Moving 8 meters in 2 seconds
O B. Falling down at 100 miles/hr
O C. Moving north at 40 km/hr
O D. Speed changing from 2 km/hr to 5 km/hr
Answers
pls help!!
The number that represents a neutral pH is ________.
Answers
Answer:
7
Explanation:
The enthalpy change of reaction 1 is -114 kJ mol-1
reaction 1
2NaOH(aq) + H2SO4(aq)
→ Na2SO4(aq) + 2H2O(1)
By using this information, what is the most likely value for the enthalpy change of reaction 2?
reaction 2
Ba(OH)2(aq) + 2HCl(aq) → BaCl2(aq) + 2H2O(1)
Answers
Answer:
-114kJ mol-1
Explanation:
Definition of the enthalpy change of neutralization: the energy released with the formation of 1 mole of water when neutralization takes place between an acid and a base.
Since both reactions yield the same number of moles of water, the answer should be -114kJ mol-1.
The statement for the enthalpy change of reaction 2 is "-114 kJ"
What is enthalpy change?The change in enthalpy (ΔH) is a quantity of heat of a system. The enthalpy change is the amount of heat that enters or exits a system during a reaction.
One equivalent of hydrogen ions is neutralised with one equivalent of hydroxide ions in the reaction 1,
NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)
The change in enthalpy is given as -114 kJ.
Two equivalents of hydrogen ions are neutralised with two equivalents of hydroxide ions in the reaction 2,
Ba(OH)2 + H2SO4 (aq) → BaSO4 (s) + 2H2O (l)
But, that primary ionic reaction is same for both the reaction in which hydrogen ion combines with hydroxide ion to generate a water molecule. So, the enthalpy change of reaction 1 would be exactly same as for reaction 2.
The neutralization enthalpy comes out to be -114 kJ.
Hence the correct answer is -114 kJ.
Learn more about enthalpy change here
https://brainly.com/question/4526346
#SPJ2