Chemical Equation Balancer
CH(4)+ 20(2)→ CO2+ 2H(2)O
22.
The reaction shown above is an example of a -
a. synthesis reaction
b. combustion reaction
c. decomposition reaction
d. double displacement reaction
Answer:
Reaction is a Combustion reaction
Is radium usually considered as part of the alkaline earth category in terms of chemistry?
Explanation:
Radium (atomic number 88) has similar properties to barium and is also in the Group 2 category. However, radium is a radioactive element and is generally under the category of radioisotopes in addition to being an alkaline earth metal, because it is not a stable element.
Which organisms are typical decomposers?
Answer:
Insects, bacteria and fungi
Explanation:
PLEASE HELP
Fossil fuels are burnt in power plants to produce electricity. Which one of the
following sequences show the correct order of energy transformation?
Answer:
a
Explanation:
Chemical then thermal because the carbon emissions produce heat
Then kinetic because there is energy transfer then electric because that's the finished result
Two substances in a mixture differ in density and particle size. theses properties can be used to
Answer:
option 1. Two substances in a mixture differ in density and particle size. These properties can be used to separate the substances. These properties can be manipulated in order to have a better separation between the two substances.
Explanation:
Answer:
Two substances in a mixture differ in density and particle size. These properties can be used to separate both of them using the separating funnel or using filtration (filter paper).
Explanation:
Since their densities are different, one substance should float above the other in the mixture which allows for the separating funnel to let the substance sinking below (with the heavier density) to flow out first before changing the beaker to let the lighter substance flow out.
The substance with a bigger particle size would not be able to pass through the filter paper unlike the substance with the smaller particle size as the filter paper's pores is not big enough for it to pass through, separating both substances (with one on the paper and the other outside the filter paper, preferably in the beaker placed below the paper).
A local plant nursery uses large sprinklers to water the plants twice a day. The water contains phosphorus, which is a fertilizer that helps plants grow. Some of the water becomes runoff and ends up in nearby streams and lakes. This is an example of which type of short-term human-induced environmental change? eutrophication
Answer:
It’s eutrophication
Explanation:
There is no way it can be DEFORESTATION or NON SUSTAINABLE SPECIES
Non sustainable harvesting has something to do with animals and eutrophication means adding excessive nutrients
Answer:A.
Explanation: I took the test, sorry if this is incorrect
What happens when you put an ice-pop outside? This is for the people who don’t know
Answer:
It melts
Explanation:
Answer:
It melts?
Explanation:
What is this called? it might be sideways but it show look like a Y
Answer:
I'm thinking it might be Element 39: Yttrium, as this is Chemistry.
Explanation:
A student heats a 2.5 g sample of calcium carbonate in a test tube. What mass of calcium oxide remains in the test tube when the reaction is complete?
CaCO3(s) = CaO(s) + CO2(g)
Select one:
a. 1.4 g CaO
b. 2.1 g CaO
c. 2.5 g CaO
d. 1.0 g CaO
Answer:
1.4 g CaO
Explanation:
Given data:
Mass of calcium carbonate = 2.5 g
Mass of Cao remain in tube = ?
Solution:
Chemical equation:
CaCO₃ → CaO + CO₂
Number of moles of CaO:
Number of moles = mass/molar mass
Number of moles = 2.5 g/ 100 g/mol
Number of moles = 0.025 mol
now we will compare the moles of CaO with CaCO₃.
CaCO₃ : CaO
1 : 1
0.025 : 0.025
Mass of CaO:
Mass = number of moles × molar mass
Mass = 0.025 mol × 56 g/mol
Mass = 1.4 g
Answer:
1.4g CaO
Explanation:
Did the exam and got it right. Hope this helps
What is the minimum number of kiloJoules needed to change 40.0 grams of water at 100C to steam at the same temperature and pressure
Answer:
90.4Kg
Explanation:
The energy required= latent heat of vaporization
Latent heat of vaporization of water= 2260 KJ/Kg
Mass of water = 0.04 Kg
Heat required= 0.04Kg× 2260 KJ/Kg
Heat required= 90.4Kg
Answer: The minimum number of kilo Joules needed is 90.4KJ.
Explanation:
The energy required= latent heat of vaporization.
Latent heat of vaporization of water= 2260 KJ/Kg
Mass of water = 0.04 Kg
Heat required= 0.04Kg× 2260 KJ/Kg
Heat required= 90.4KJ.
Learn more: https://brainly.com/question/2477358
SOMEONE HELP ME PLEASE ILL GIVE BRAINLY
Calculate the number of protons and neutrons for ²⁴Mg and 88Sr.
Answer:
12 protons and 12 neutrons are present in Mg and
38 protons and 50 neutrons are present in Sr
Explanation:
Answer:
For ²⁴Mg
1. Proton number = 12
2. Neutron number = 12
For ⁸⁸Sr:
1. Proton number = 38
2. Neutron number = 50
Explanation:
For ²⁴Mg:
1. Determination of the number of proton.
The atomic number of an element is simply defined as the number protons in the atom of the element. The atomic number of ²⁴Mg is 12 since no two elements have the same atomic number.
Atomic number = 12
Proton number = Atomic number
Proton number = 12
2. Determination of the Neutron number.
Mass number = 24
Proton number = 12
Neutron number =?
Mass number = Proton + Neutron
24 = 12 + Neutron
Collect like terms
Neutron = 24 – 12
Neutron number = 12
For ⁸⁸Sr:
1. Determination of the number of proton.
The atomic number of ⁸⁸Sr is 38.
Atomic number = 38
Proton number = Atomic number
Proton number = 38
2. Determination of the Neutron number.
Mass number = 88
Proton number = 38
Neutron number =?
Mass number = Proton + Neutron
88 = 38 + Neutron
Collect like terms
Neutron = 88 – 38
Neutron number = 50
Balance equation PLEASSEEE HELPPP MEEE
Answer:
2AgNO₃ + MgCl₂ ⇒ 2AgCl + Mg(NO₃)₂
Explanation:
Match both sides of the equation. practice practice
are particles in gas close together
Answer:
Solid particles are close together not gas particles
* The cost of table salt and table sugar is Rs 15 per kg.
and Rs 69 per kg respectively calculate their cost per mole?
Cost per mole
Table salt : Rs 0.878
Table sugar : Rs 23.63
Further explanationGiven
Cost table salt (NaCl) = 15/kg
Cost table sugar(sucrose-C12H22O11) = 69/kg
Required
cost per mole
Solution
mol of 1 kg Table salt(NaCl ,MW= 58.5 g/mol) :
[tex]\tt mol=\dfrac{1000~g}{58.5}=17.09~mol=Rs~15\rightarrow 1~mol=Rs~0.878[/tex]
mol of 1 kg Table sugar(C12H22O11 ,MW= 342 g/mol) :
[tex]\tt mol=\dfrac{1000}{342}=2.92~mol=Rs~69\rightarrow 1~mol=Rs~23.63[/tex]
“True or False”
Unsaturated solution contains the maximum amount of solute dissolved by a given amount of solvent
ANSWER- True
EPLANATION
(oh no)
What is the mass of silicon when there are 1.8 x 10^21 atoms of silicon?
Answer:
Mass = 0.084 g
Explanation:
Given data:
Mass of silicon = ?
Number of atoms of silicon = 1.8 × 10²¹ atom
Solution:
Avogadro number:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance. The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
1.8 × 10²¹ atom × 1 mole / 6.022 × 10²³ atoms
0.299× 10⁻² mol
0.00299 mol
Mass of silicon:
Mass = number of moles × molar mass
Mass = 0.00299 mol × 28.1 g/mol
Mass = 0.084 g
Is honors high school chemistry hard? Is it hard mathematically? please answer ASAP i have to put in my courses for next year.
Explanation:
yes its hard if you don't pay attention.
Yes, the math is harder but chemistry is not it's really fun the math does get harder tho.
Order the following elements from Highest to Lowest Electronegativity.
K, Sc, Ca, Zn, Br
Sc, K, Br, Zn, Ca
OK, Ca, Sc, Zn, Br
O Br, Zn, Sc, Ca, K
Ca, Zn, Br, K, SC
Answer:
O, Ca, Zn, Br
Sc, K, Br,
Explanation:
The correct order of the chemical elements from highest to lowest electronegativity is: C. Br, Zn, Sc, Ca, K.
Electronegativity refers to a measure of the ability of an atom of a chemical element to attract any shared pair of electrons.
Generally, the electronegativity of a chemical element typically increases across the period from left to right.
In Chemistry, the electronegativity of some of the chemical element are:
Bromine (Br) = 2.96Calcium (Ca) = 1.0Zinc (Zn) = 1.65Potassium (k) = 0.82Scandium (Sc) = 1.36Hence, the order of the chemical elements from highest to lowest electronegativity is:
1. Bromine (Br) = 2.96
2. Zinc (Zn) = 1.65
3. Scandium (Sc) = 1.36
4. Calcium (Ca) = 1.0
5. Potassium (k) = 0.82
Read more: https://brainly.com/question/18214726
2. How many liters of propane gas (C3H8) will undergo complete combustion with 34.0 L of oxygen gas? ___ C3H8 (g) + ___ O2 (g → ___ CO2 (g + ___ H2O(g
Answer:
6.8 liters of propane gas will undergo a complete combustion with 34.0 L of oxygen gas.
Explanation:
Given;
combustion reaction of propane and oxygen;
C₃H₈ + O₂(g) → CO₂(g) + H₂O(g)
Balance the chemical reaction as follows;
C₃H₈ + 5O₂(g) → 3CO₂(g) + 4H₂O(g)
From the balanced equation;
1 mole of C₃H₈ ---------------- 5 moles of 5O₂(g)
x Liters of C₃H₈ ----------------- 34.0 Liters of O₂(g)
x = 34 liters / 5
x = 6.8 liters
Therefore, 6.8 liters of propane gas will undergo a complete combustion with 34.0 L of oxygen gas.
EMERGENCY!!! Can someone tell me the answer plz plz I’ll give you brainlist and points plz This is my final test No wrong answers
Answer:
A. the valence electrons
Explanation:
Answer:
The valence electrons
Explanation:
The valence electrons determine an element's properties because chemical properties of each element are determined by the element's electronic configuration and PARTICULARLY by its outermost valence electrons. I hope it helps!
~Good luck
When using a light microscope, focus the specimen with the scanning objective
lens first.
Reasoning:
Answer:
The light microscope bends a beam of light at the specimen using a series of lenses to provide a clear image of the specimen to the observer.
The partial symbol for a particular ion is 26M2+ What are the number of electrons contained in one ion
Answer:
24
Explanation:
26-2=24 because when an atoms loses 2 electrons it gains 2+ charge
What math is used to find density?
Answer:
[tex]\huge\mathtt{{\colorbox{silver}{ANSWER~~~↴}}}[/tex]
Density is the mass of an object divided by its volume. Density often has units of grams per cubic centimeter (g/cm3). Remember, grams is a mass and cubic centimeters is a volume (the same volume as 1 milliliter).
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
what are the three things transported by global ocean circulation?
Answer:
The produce large circular currents in all the ocean basins. Currents, The North Equatorial Current, the Gulf Stream, the North Atlantic Current, and the Canary Current.
Explanation:
i need to know what occupied vs full means for chemistry
Whic statements explain why rocks weather at different rates? Check all that apply
Explanation:
Weathering occurs one of three ways: through physical processes such as freezing and thawing, because of live organisms whose roots break rocks or through chemical processes that occur when carbon dioxide in the soil and air and mixes with water and specific minerals in rocks to form a weak acid that reduces rocks into silt, soil and sediment.
Chemical weathering typically increases as temperatures rise and rain falls, which means rocks in hot and wet climates experience faster rates of chemical weathering than do rocks in cold, dry climates.
Read all above and you may just find your answer!3. What is the energy of a photon whose frequency is 5.2 x 1015 Hz? Use the equation: E = hxv
h= 6.626 10-34 J xs
4. What is the frequency of radiation whose wavelength is 2.40 x 105 cm? v=c+X
C= 3 x 108m/s
Answer:
3. 3.45×10¯¹⁸ J.
4. 1.25×10¹⁵ Hz.
Explanation:
3. Determination of the energy of the photon.
Frequency (v) = 5.2×10¹⁵ Hz
Planck's constant (h) = 6.626×10¯³⁴ Js
Energy (E) =?
The energy of the photon can be obtained by using the following formula:
E = hv
E = 6.626×10¯³⁴ × 5.2×10¹⁵
E = 3.45×10¯¹⁸ J
Thus, the energy of the photon is 3.45×10¯¹⁸ J
4. Determination of the frequency of the radiation.
Wavelength (λ) = 2.4×10¯⁵ cm
Velocity (c) = 3×10⁸ m/s
Frequency (v) =?
Next, we shall convert 2.4×10¯⁵ cm to metre (m). This can be obtained as follow:
100 cm = 1 m
Therefore,
2.4×10¯⁵ cm = 2.4×10¯⁵ cm × 1 m /100 cm
2.4×10¯⁵ cm = 2.4×10¯⁷ m
Thus, 2.4×10¯⁵ cm is equivalent to 2.4×10¯⁷ m
Finally, we shall determine the frequency of the radiation by using the following formula as illustrated below:
Wavelength (λ) = 2.4×10¯⁷ m
Velocity (c) = 3×10⁸ m/s
Frequency (v) =?
v = c / λ
v = 3×10⁸ / 2.4×10¯⁷
v = 1.25×10¹⁵ Hz
Thus, the frequency of the radiation is 1.25×10¹⁵ Hz.
Which of the following redox conditions will produce a spontaneous reaction?
A. The sum of the voltages of the half-reactions is positive.
O B. The sum of the voltages of the half-reactions is negative.
O C. The voltage of the reduction half-reaction is positive.
D. The voltage of the reduction half-reaction is negative.
Answer:
A. The sum of the voltages of the half-reactions is positive.
Explanation:
correct on a p e x
Among the following redox conditions those will produce a spontaneous reaction is The sum of the voltages of the half-reactions is positive.
What are redox reactions?Redox reactions are the reactions in which reduction reaction and oxidation reaction happens simultaneously. The term ‘redox’ is a short form of reduction-oxidation. All the redox reactions can be broken down into two different processes: a reduction process and an oxidation process.
The loss of electrons and the corresponding increase in the oxidation state of a given reactant is called oxidation. The gain of electrons and the corresponding decrease in the oxidation state of a reactant is called reduction.
For example-
H₂ + F₂ → 2HF
Hydrogen is added to Fluorine gas so Fluorine has been reduced but Hydrogen has been oxidised.
Therefore, Among the following redox conditions those will produce a spontaneous reaction is The sum of the voltages of the half-reactions is positive.
Learn more about Redox reactions here:
https://brainly.com/question/13293425
#SPJ2
"Indicate in each whether the following electron configurations correspond to an atom in its ground state, excited state, or is impossible."
a. [tex]{1s}^{2} {2s}^{2} {2p}^{4} [/tex]
b. [tex] {1s}^{2} {2s}^{2} {2p}^{3} {2d}^{1} [/tex]
c. [tex] {1s}^{2} {2s}^{2} {2p}^{3}{3s}^{1} [/tex]
d. [tex] {1s}^{2} {2s}^{1} {2p}^{2} [/tex]
e. [tex] {1s}^{2} {2s}^{2} {2p}^{1} [/tex]
f. [tex] {1s}^{2} {2s}^{3} [/tex]
Please, I really need help. I don't know what to do...
Answer:
Explanation:
Firstly, let's define what ground and excited state electronic configuration.
Ground state electronic configuration is when the electrons of the atom are in there lowest possible energy level while excited state electronic configuration is when electron(s) have moved to a higher energy level. Examples of these are provided in the options
a. 1s²2s²2p⁴ - This is a ground state electronic configuration (of oxygen) because the electrons are in there lowest possible energy level.
b. This option is not displaying (it is displaying something like an image that isn't loading)
c. 1s²2s²2p³3s¹ - We can see from this that an electron jumped from 2p energy level to 3s (p energy level ought to be completely filled with 6 electrons before another electron moves to the next energy level) meaning the electron is in it's excited state thus this is an excited state electronic configuration (of oxygen).
d. 1s²2s¹2p² - We can see from this also that an electron jumped from the 2s energy level to the 2p energy level (making it 2p² instead of 2p¹ in the ground state). The 2s energy level should ordinarily have 2 electrons. Thus, this is an excited state electronic configuration (of boron).
e. 1s²2s²sp¹ - This is a ground state electronic configuration (of boron) since all the electrons are in there lowest possible energy level.
f. 1s²2s³ - This configuration is impossible because the s energy level should only contain a maximum of 2 electrons, thus impossible to have 3 electrons in the s energy level