Ms.Lewis is comparing computer at an electronic store. she asks the questions shown below. State whether each questions is statistical or not. Explain. What are the prices of the computers?​

After 5 and a half minutes, the temperature of the water will be 77°F.

In this scenario, we are given that the initial temperature of the water is 80°F. We also know that the temperature of the water decreases by 0.5°F every minute. We want to find out what the temperature of the water will be after 5 and a half minutes.

To solve this problem, we need to use a bit of math. We know that the temperature of the water is decreasing by 0.5°F every minute. So after 1 minute, the temperature of the water will be 80°F - 0.5°F = 79.5°F. After 2 minutes, the temperature will be 79.5°F - 0.5°F = 79°F. We can continue this pattern to find the temperature after 5 and a half minutes.

After 5 minutes, the temperature of the water will be 80°F - (0.5°F x 5) = 77.5°F. And after another half minute (or 0.5 minutes), the temperature will decrease by another 0.5°F, so the temperature will be 77.5°F - 0.5°F = 77°F.

To know more about temperature here

https://brainly.com/question/11464844

#SPJ4

The leg measurement will make a right triangle is 21 cm.

The longest side of a right-angled triangle, i.e. the side opposite the right angle, is called the hypotenuse in geometry.

Pythagorean theorem :

If p be the length of the hypotenuse of a right-angled triangle, q and r be the lengths of the other two sides, then

p² = q² + r²

The lengths of the other two sides of the given right-angled triangle are 20 cm and 21 cm. Put these values in the above theorem to get the desired result.

Now, p² = (20)² + (21)²

= 400 + 441 = 841

i.e. p = √(841) = 29

Therefore the length of the hypotenuse is 29 cm. The right angle traingle is 21 cm.

Learn more about hypotenuse, here:

https://brainly.com/question/28946097

#SPJ1

Testing is only one part of the overall assessment process.

What is evaluation in education?

Assessment is an ongoing process of gathering evidence of what each student actually knows, understands, and can do. A comprehensive evaluation approach includes a combination of formal and informal evaluation (formative, preliminary, and summative).

What is an assessment? Also what does it mean?

At the course level, assessments provide important data on the breadth and depth of student learning. Evaluation is more than scoring. It's about measuring student learning progress. Assessment is therefore defined as “the process of data gathering to better understand the strengths and weaknesses of a student's learning”. 

Learn more about assessment

brainly.com/question/28046286

#SPJ1

The value of x in the Intersecting chords is 15

From the question, we have the following parameters that can be used in our computation:

Intersecting chords

The value of x is then calculated as

x = 1/2(30 - 2x + 30)

So, we have

2x = 30 - 2x + 30

Evaluate the like terms

4x = 60

Divide

x = 15

Hence, the value of x is 15

Read more about angles at

https://brainly.com/question/28293784

#SPJ1

Answer:

[tex]h(x)=2x^2-12x+9[/tex],  [tex]p(x)=-5x^2-20x-5[/tex]

Step-by-step explanation:

To get to the standard form of a quadratic equation, we need to expand and simplify. Recall that standard form is written like so:

[tex]ax^2+bx+c[/tex]

Where a, b, and c are constants.

Let's expand and simplify h(x).

[tex]2(x-3)^2-9=\\2(x^2+9-6x)-9=\\2x^2+18-12x-9=\\2x^2+9-12x=\\2x^2-12x+9[/tex]

Thus, [tex]h(x)=2x^2-12x+9[/tex]

Let's do the same for p(x).

[tex]-5(x+2)^2+15=\\-5(x^2+4+4x)+15=\\-5x^2-20-20x+15=\\-5x^2-5-20x=\\-5x^2-20x-5[/tex]

Thus, [tex]p(x)=-5x^2-20x-5[/tex]

A statistician would reply that in order to determine if the generic drug is less effective than the name-brand drug, a hypothesis test needs to be conducted.

The null hypothesis (H0) would be that there is no difference in the average blood pressure reduction between the two drugs, while the alternative hypothesis (H1) would be that the name-brand drug has a higher average reduction in blood pressure than the generic drug.

To test these hypotheses, a t-test would be appropriate since we have two independent samples (control and treatment groups) with known means, standard deviations, and sample sizes. The t-test will provide a p-value, which can be compared to a chosen significance level (e.g., α = 0.05).

If the p-value is less than the significance level, we reject the null hypothesis and conclude that there is a significant difference in the average blood pressure reduction between the two drugs. If the p-value is greater than the significance level, we fail to reject the null hypothesis, meaning we do not have enough evidence to claim that the name-brand drug is more effective than the generic drug.

Learn more about hypothesis:

https://brainly.com/question/10854125

#SPJ11

Answer:

x = 10

Step-by-step explanation:

Angle form is = 90°

therefore

5x + 25 + x + 5 = 90

6x + 30 = 90

6x = 90-30

6x = 60

6x/6 = 60/6

x = 10

Answer:

236 cm^2  and  8 cm

Step-by-step explanation:

width=w

240=6(5)(w)

w=8 cm

area=2[(6)(5)+(6)(8)+(5)(8)]

area=236 cm^2

where t is measured in days, and A(t) represents the amount of flooded land at time t. This function has a B-value of -0.3118.

To model the situation of the flood, we can use an exponential decay function, which represents the decreasing amount of flooded land over time. The function can be written as:

[tex]A(t) = A0 * e^{(-kt)}[/tex]

where A(t) is the amount of flooded land at time t, A0 is the initial amount of flooded land, k is a constant representing the rate of decay, and e is the mathematical constant approximately equal to 2.718.

To determine the value of k, we can use the given information that after 2 days, only 3375 acres of land were under water. Substituting t = 2 and A(t) = 3375 into the equation above, we get:

[tex]3375 = A0 * e^{(-2k)[/tex]

We also know that initially, there were 6000 acres of land under water. Substituting A0 = 6000 into the equation above, we get:

Dividing both sides by 6000, we get:

ln(0.5625) = -2k[tex]ln(0.5625) = -2k[/tex]

Taking the natural logarithm of both sides, we get:

[tex]ln(0.5625) = -2k[/tex]

Solving for k, we get:

[tex]k = -ln(0.5625)/2[/tex]

k ≈ 0.3118

Therefore, the function to model the situation of the flood is:

[tex]A(t) = 6000 * e^{(-0.3118t)}[/tex]

To learn more about function, visit

https://brainly.com/question/12431044

#SPJ1

We can conclude that cosh2x−sinh2x=1.

An equation is a mathematical statement that states that two expressions are equal. It is typically written as a comparison between two expressions and consists of an equal sign (=). Equations are used to solve mathematical problems, to understand the relationships between different quantities, and to describe the behavior of a physical system. In addition, equations are used to calculate various quantities, such as the area of a circle or the speed of an object.

To show that cosh2x−sinh2x=1, we can use the identities for cosh2x and sinh2x. The identity for cosh2x is cosh2x=2cosh2x−1 and the identity for sinh2x is sinh2x=2sinh2x−1.

Substituting these identities into the equation cosh2x−sinh2x=1 yields 2cosh2x−1−2sinh2x−1=1. Simplifying this equation yields cosh2x−sinh2x=1, as required. Thus, we can conclude that cosh2x−sinh2x=1.

To know more about equation click-
http://brainly.com/question/2972832
#SPJ1

Simplifying this equation yields [tex]\cosh^2x-sinh^2x=1[/tex], as required. Thus, we can conclude that [tex]\cosh^2x-sinh^2x=1[/tex].

An equation is a mathematical statement that states that two expressions are equal. It is typically written as a comparison between two expressions and consists of an equal sign (=). Equations are used to solve mathematical problems, to understand the relationships between different quantities, and to describe the behavior of a physical system. In addition, equations are used to calculate various quantities, such as the area of a circle or the speed of an object.

We will show that [tex]\cosh^2x-sinh^2x=1[/tex].

Let us consider the expression [tex]\cosh^2x-sinh^2x.[/tex]

Then, [tex]\cosh^2x=(e^2x+e^{-2}x)/2[/tex] and [tex]sinh^2x=(e^2x+e^{-2}x)/2[/tex]

Substituting, we get [tex]\cosh^2x -\sinh^2x=(e^2x+e^{-2}x)/2\ -(e^2x+e^{-2}x)/2[/tex]

Simplifying, we have [tex]\cosh^2x -\sinh^2x=e^2x+e^{-2}x-e^2x+e^{-2}x[/tex]

[tex]=2e^{-2}x\\\\=2(e^{-2}x)\\\\=2[/tex]

Hence, [tex]cosh^2x-sinh^2x=1[/tex]

Therefore, we have shown that [tex]cosh^2x-sinh^2x=1[/tex]

To know more about equation click-

brainly.com/question/2972832

#SPJ1

The correct form of question is Show that cosh2x−sinh2x=1 .

The surface area of the two solids are listed below:

Case 1 - 232 square centimeters

Case 2 - 240 square centimeters

The surface area of a solid is the sum of the areas of all its faces. There are two cases of solids whose surface areas must be determined. The area formulas for triangle and rectangle are, respectively:

Triangle

A = 0.5 · b · h

Rectangle

A = b · h

Case 1

A = (6 cm) · (8 cm) + 2 · 0.5 · (6 cm) · (12 cm) + 2 · 0.5 · (8 cm) · (14 cm)

A = 232 cm²

Case 2

A = 2 · 0.5 · (8 cm) · (3 cm) + (8 cm) · (12 cm) + 2 · (5 cm) · (12 cm)

A = 24 cm² + 96 cm² + 120 cm²

A = 240 cm²

To learn more on surface areas of solids: https://brainly.com/question/31126484

#SPJ1

Thus, the on average the contents weight for the transatlantic shipping is found as  24.7  pounds.

Given dimension of rectangular prism

Length l = 4ft

width w = 9.5 ft

height h = 13 ft

Volume of rectangular prism = l*w*h

V = 4*9.5*13

V = 494 ft³

Now,

1  ft³ = 0.05 pounds

So,

weight of  494 ft³ =  494*0.05 pounds

weight of 494 ft³ =  24.7  pounds

Thus, the on average the contents weigh for the transatlantic shipping is found as  24.7  pounds.

know more about the rectangular prism

https://brainly.com/question/24284033

#SPJ1

Answer: 6 3/7

Step-by-step explanation:

9/1 x 5/7

If we multiply the numerators and denominators, we get 45/7 or 6 3/7 as a mixed number.

Answer:

[tex]\frac{45}{7}[/tex] or 6.4285

Step-by-step explanation:

First, multiply 9 and 5, which gives you 45.

9(5)=45

Then, divide 45 by 7.

45/7=6.4285

That gives  you  [tex]\frac{45}{7}[/tex] or 6.4285

Hope this helps!

Part A: A reasonable domain to plot the growth function would be from d = 0 to d = 11.

Part B: The y-intercept of the graph of the function f(d) is 7

Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.

The domain of a function represents the set of input values for which the function is defined and can produce a meaningful output.

The y-intercept of a function represents the value of the function when the input is equal to zero.

The average rate of change of a function from x = a to x = b is given by the slope of the secant line passing through the points (a, f(a)) and (b, f(b)).

Here we have

A biologist is studying the growth of a particular species of algae. She writes the following equation to show the radius of the algae, f(d), in mm, after d days:

=> f(d) = 7(1.06)^d

Since it is given that the radius of the algae was approximately 13.29 mm when the biologist concluded her study, we can set f(d) = 13.29  

=> 13.29 = [tex]7(1.06)^{d}[/tex]

=> ln(13.29/7) = d ln(1.06)

=> d = ln(13.29/7)/ln(1.06) ≈ 11  

Therefore, A reasonable domain to plot the growth function would be from d = 0 to d = 11.

Part B: The y-intercept of the graph of the function f(d) represents the value of the function when d = 0.

Substituting d = 0 into the given equation, we get:

f(0) = 7(1.06)⁰ = 7

Therefore, The y-intercept of the graph of the function f(d) is 7

Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is given by the slope of the secant line passing through the points (4, f(4)) and (11, f(11)). Using the given equation, we can evaluate f(4) and f(11):

f(4) = 7(1.06)⁴ ≈ 8.84

f(11) = 7(1.06)¹¹ ≈ 13.29

The slope of the second line passing through these two points is:

Slope = (f(11) - f(4))/(11 - 4) = [ 13.29 - 8.84]/7 = 0.64

Therefore,

The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.

Learn more about Functions at

https://brainly.com/question/24839787

#SPJ1

The probability of the sample mean being less than 79 is 77.64%

In order to solve the given problem we have to take the help of Standard error mean

SEM = ∑/√(n)

here,

∑ = population standard deviation

n = sample size

hence, the z-score can be calculated as

z = ( x' - μ)/σ/√(n)

here,

x' = sample mean

μ = population mean

σ = population standard deviation

n = sample size

adding the values into the formula

SEM = σ / √(n)

= 21/√64

= 2.625

z = (x' - μ)/SEM

= (79-77)/2.625

= 0.76

now, using standard distribution table we find that probability of a z-score is less than 0.77 then converting it into percentage

0.77 x 100

= 77%

The probability of the sample mean being less than 79 is 77.64%

To learn more about probability,

https://brainly.com/question/13604758

#SPJ4

The height of the parabolic balloon arch for the prom is 12.25 feet.

Using these assumptions, we can find the equation of the parabola that the arch follows as x = a(y-k)² + h, where (h,k) is the vertex and a is a constant that determines the shape of the parabola. We can find the value of a by using one of the points that the arch passes through, say (3,0):

3 = a(0-k)² + h h = 3 - a(k²)

Similarly, using the other point that the arch passes through, say (7,0):

7 = a(0-k)² + h h = 7 - a(k²)

Equating the expressions for h, we get:

3 - a(k²) = 7 - a(k²) a = -1/4

Substituting this value of a into one of the equations for h, say h = 7 - a(k²), we get:

h = 7 + 1/4(k²)

So the vertex of the parabola is at (h,k) = (7,0), and the equation of the parabola is x = -1/4(y² - 28y + 49).

To find the height of the arch, we need to find the y-coordinate of the vertex, which is k = 0. So the height of the arch is given by the distance between the vertex and the lowest point of the arch, which is the x-intercept of the parabola. To find the x-intercept, we set y = 0 in the equation of the parabola:

x = -1/4(0² - 28(0) + 49)

x = -1/4(49) = -12.25

However, since we are dealing with a physical object, the height cannot be negative. Therefore, we take the absolute value of the x-intercept, which gives us:

| -12.25 | = 12.25 feet

To know more about height here

https://brainly.com/question/10726356

#SPJ4

The drive-thru with typically more wait time is Burger Quick, because it has a larger median. The Option A.

The median is a measure of central tendency that represents the middle value of a set of data. In this case, the median wait time at Burger Quick is 15.5 minutes, while the median wait time at Super Fast Food is 12 minutes.

This indicates that, on average, customers at Burger Quick experience a longer wait time compared to customers at Super Fast Food. The larger median at Burger Quick suggests that there may be some longer wait times skewing the data towards the higher end which could be due to various factors such as slower service, or other operational issues at Burger Quick resulting in a longer wait time for customers at their drive-thru.

Read more about median

brainly.com/question/16408033

#SPJ1

Answer:

The answer is 28

Step-by-step explanation:

sin0=opp/hyp

let hyp be x

sin30=14/x

0.5x=14

divide both sides by 0.6

x=14/0.5

x=28

The height of the kite is approximately 68.4 ft.

To solve the problem, we can use trigonometry. We know that the string is the hypotenuse of a right triangle, with the height of the kite as one of the legs. The angle of elevation, which is the angle between the string and the ground, is also given. We can use the tangent function to find the height of the kite:

tan(46°) = height / 94

Solving for height, we get:

height = 94 * tan(46°)

Using a calculator, we get:

height ≈ 68.4 ft

Therefore, the height of the kite is approximately 68.4 ft.

We use the given angle of elevation and the length of the string to set up a right triangle with the height of the kite as one of the legs. Then, we use the tangent function to relate the angle to the height of the kite. Finally, we solve for the height using a calculator and round to the nearest tenth as requested.

Learn more about the height

https://brainly.com/question/28122539

#SPJ4

Complete Question:

A kite flying in the air has a 94-ft string attached to it, and the string is pulled taut. The angle of elevation of the kite is 46 °. Find the height of the kite. Round your answer to the nearest tenth.

The two null hypothesis that are correct answer are two-sample t-test and one-sample t-test.

Among the group of answer choices provided, the tests that require calculating degrees of freedom are the two-sample t-test and the one-sample t-test. Both of these tests belong to the t-test family and involve using degrees of freedom to determine the critical t-value.

In summary:
- Null hypothesis: The assumption that there is no significant difference between the sample and population or between two samples.
- T-test: A statistical test used to determine if there is a significant difference between the means of two groups or between a sample and population mean.
- Degrees of freedom: A value used in statistical tests that represents the number of independent values in a data set, which can affect the outcome of the test.

So answer is: two-sample t-test and one-sample t-test.

Learn more about null hypothesis here:

https://brainly.com/question/28920252

#SPJ11

The null hypothesis statistical tests that require calculating degrees of freedom are the two-sample t-test and the one-

sample t-test. The degrees of freedom are necessary to calculate the t-value for these tests. The chi-squared test also

requires degrees of freedom, but it is not a test for a null hypothesis.

The correct answer is: all of the above.

All these tests require calculating degrees of freedom:

1. Two-sample t-test:

Degrees of freedom are calculated using the formula (n1 + n2) - 2, where n1 and n2 are the sample sizes of the two

groups being compared.
2. Chi-squared test:

Degrees of freedom are calculated using the formula (rows - 1) * (columns - 1), where rows and columns represent the

number of categories in the data.
3. One-sample t-test:

Degrees of freedom are calculated using the formula n - 1, where n is the sample size.

The null hypothesis statistical tests that require calculating degrees of freedom are the two-sample t-test and the one-

sample t-test. The degrees of freedom are necessary to calculate the t-value for these tests. The chi-squared test also

requires degrees of freedom, but it is not a test for a null hypothesis.

for such more question on null hypothesis

https://brainly.com/question/4436370

#SPJ11

Answer: 1 is .4

2. is .6

3 is .5

4 is .375

5 is .18

6 is .71

7 is .16

8 is .66 repeating

9 is .91

and 10 is .25

Step-by-step explanation:

to get all these and fractions to decimals in the future just divide the numerator by the denominator in other words the top number by the bottom number

1): 0.4

2): 0.67 or 0.7

3): 0.5

4): 0.37 or 0.4

5): 0.18

6): 0.42 or 0.5

7): 0.17

8): 0.7

9): 0.97 or 1

10): 0.25

1. The expression √b means "the square root of b".

2. The radical symbol (√) stands for the exponent 1/2.

3. The number or expression under the radical symbol is called the radicand.

A radicand is the number or expression underneath a radical symbol (√). It is the number or expression that is being operated on by the root. The square root of the radicand is the result of the operation.

The expression √6 represents the square root of 6. This is the value of x that, when multiplied with itself, results in 6.

The square root of 6 is equal to 2.44948974, which is the positive solution to the equation x² = 6.

The radical symbol (√) indicates that the expression is a root and the number or expression under the radical symbol is called the radicand, which is 6 in this case.

The exponent of the radical symbol is 1/2, which implies that the expression is a square root.

For more questions related to expression

https://brainly.com/question/395066

#SPJ1

Answer:

$525

Step-by-step explanation:

Jackie starts with $500, and the interest rate is 5% per year.

This means that, after one year, Jackie will have accumulated 5% interest with the $500 she put into the savings account.

Now, we can find 5% of $500 by converting 5% to its fraction form, which is 5/100. 5% of a value means that you need to multiply the fraction (or decimal) by the said value. So, we have:

[tex]\frac{5}{100}[/tex] · 500 =

[tex]\frac{2500}{100}[/tex] =

25

Therefore, the amount of interest she has accumulated in one year is $25. Combined with the money in her savings account, she has $525, since $500 + $25 = $525.

Answer:

x ≈ 39.5°

Step-by-step explanation:

using the cosine ratio in the right triangle

cos x = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{OP}{NP}[/tex] = [tex]\frac{64}{83}[/tex] , then

x = [tex]cos^{-1}[/tex] ( [tex]\frac{64}{83}[/tex] ) ≈ 39.5° ( to the nearest tenth )

The surface area of the actual ramp, including the underside, is approximately 15.38 yd².

What is triangle?

A triangle is a three-sided polygon with three angles. It is a fundamental geometric shape and is often used in geometry and trigonometry.

To find the surface area of the actual ramp, we need to first find the dimensions of the ramp.

We are given that the scale model of the ramp is a right triangular prism with legs of 8 in, 5 in, and 5 in, and a height of 3 in. We can use these dimensions to find the dimensions of the actual ramp.

Since the ramp is a scale model, the ratio of the dimensions of the model to the actual ramp is the same for all corresponding dimensions. The height of the triangular base in the actual ramp is given as 0.6 yards, which is equal to 21.6 inches. So, we have:

height of actual ramp / height of model = 21.6 in / 3 in = 7.2

We can use this ratio to find the dimensions of the actual ramp:

height of actual ramp = 7.2 * 3 in = 21.6 in

length of actual ramp = 7.2 * 8 in = 57.6 in

width of actual ramp = 7.2 * 5 in = 36 in

Now we can find the surface area of the actual ramp. The surface area of the top and bottom of the ramp is the area of the triangular base plus the area of the rectangle formed by the length and width of the ramp:

Area of triangular base = (1/2) * base * height = (1/2) * 5 in * 5 in = 12.5 in²

Area of rectangular top and bottom = length * width = 57.6 in * 36 in = 2073.6 in²

Total surface area of top and bottom = 2 * (Area of triangular base + Area of rectangular top and bottom) = 2 * (12.5 in² + 2073.6 in²) = 4153.2 in²

The surface area of the sides of the ramp is the area of the three rectangles formed by the height and width of the ramp:

Area of one side rectangle = height * width = 21.6 in * 36 in = 777.6 in²

Total surface area of sides = 3 * Area of one side rectangle = 3 * 777.6 in² = 2332.8 in²

Finally, we add the surface area of the top and bottom to the surface area of the sides to get the total surface area of the ramp:

Total surface area of ramp = Surface area of top and bottom + Surface area of sides = 4153.2 in² + 2332.8 in² = 6486 in²

Converting to yards and rounding to two decimal places, we get:

Total surface area of ramp = 6486 in² / (36 in/yd)² = 15.38 yd² (rounded to two decimal places)

Therefore, the surface area of the actual ramp, including the underside, is approximately 15.38 yd².

To learn more about triangle from the given link:

https://brainly.com/question/2773823

#SPJ1

Lin plans to swim 12 laps and has already swum 9.75 laps, so the number of laps she has left to swim can be found by subtracting 9.75 from 12:

y = 12 - 9.75

Simplifying the right side:

y = 2.25

Therefore, Lin has 2.25 laps left to swim.

Compartmentalized is the type of data that is discussed in the problem researched by an employee rylie who is a newly hired cybersecurity expert for a government agency and has working experience in the private sector.

Data classification is the way of organizing data into different categories that make it easy to retrieve, sort and store for future use. In simple words, compartmentalization means to separate into isolated compartments or categories. In data language, A nonhierarchical grouping of information used to control access to data more finely than with hierarchical security classification alone is called Compartmentalization. Now, we have a rylie who is a newly hired cybersecurity expert for a government agency. She has working experience in the private sector. On basis of her experience she has discovered that, the private sector companies often had confusing hierarchies for data classification as compared to the government's classifications which are well known and standardized. During her training, she is researching data that requires special authorization beyond normal classification. The data type that she researched and that is authorization beyond normal classification is called compartmentalized data.

For more information about data classification, visit :

https://brainly.com/question/30580761

#SPJ4

The main topic is the split-half reliability test used in psychological research to assess the internal consistency of a scale.

In psychological research, reliability is a crucial aspect of measuring constructs or attributes. One commonly used method for assessing the reliability of a scale is the split-half reliability test.

In this test, the scale questions are divided into two parts equally, and the resulting scores of both parts are correlated against one another.

For example, if a scale had 20 items, the items could be randomly split into two groups of 10 items each.

Scores are then calculated for each group, and the scores are correlated with each other to determine the degree of consistency between the two halves.

The correlation coefficient obtained from this analysis provides an estimate of the internal consistency of the scale.

A high correlation coefficient indicates a high level of internal consistency, indicating that the two halves of the scale are measuring the same construct or attribute.

Conversely, a low correlation coefficient suggests that the two halves of the scale are not measuring the same construct or attribute, and the scale may need to be revised or abandoned.

Overall, the split-half reliability test provides a quick and efficient method for evaluating the reliability of a scale.

However, it is important to note that this method does have some limitations, such as the possibility of unequal difficulty or discrimination of the items in each half of the scale.

Therefore, researchers often use other methods, such as Cronbach's alpha, in conjunction with the split-half reliability test to provide a more comprehensive assessment of the reliability of a scale

Learn more about reliability test

brainly.com/question/27873337

#SPJ11

Answer:

Step-by-step explanation:

domain is -infinity to positive infinity range is -3 to infinity. Increasing from -3 to infinity and decreasing from - infinity to -3 and it’s minimum

Answer:

x = -5, x = 1

As (x, y) coordinates, the x-intercepts are (-5, 0) and (1, 0).

Step-by-step explanation:

The x-intercepts are the x-values of the points at which the curve crosses the x-axis, so when y = 0.

From inspection of the given graph, we can see that the parabola crosses the x-axis at x = -5 and x = 1.

Therefore, the x-intercepts of the parabola are:

As (x, y) coordinates, the x-intercepts are (-5, 0) and (1, 0).