Answer:
A
Explanation:
M.G has no cure. it's an autoimmune disease that affects communication between nervous and the muscles.
Kinetic molecular theory says that as water molecules absorb energy, their motion and temperature __________ and the sample becomes ___________.
Responses
A expand, largerexpand, larger
B decrease, soliddecrease, solid
C stays the same, smallerstays the same, smaller
D increase, warm
Kinetic molecular theory says that as water molecules absorb energy, their motion and temperature increase and the sample becomes warm
What can we infer about the impact of temperature from the kinetic theory of molecules?The average kinetic energy of the molecules will rise as the temperature rises, according to the kinetic molecular theory. The edge of the container will probably be more frequently struck by the particles as they travel more quickly.
The average molecular velocity of a gas increases as its temperature rises; for example, doubling the temperature will result in a four-fold increase in molecular velocity. More momentum and kinetic energy will be transferred to the container's walls in collisions with them.
learn more about kinetic molecular theory
https://brainly.com/question/134712
#SPJ1
which of the following processes is not spontaneous? select one: a. a smoker's smokes gathers around the smoker. b. a woman enters a room. shortly thereafter her perfume can be smelled by those on the other side of the room. c. leaves decay. d. a lighted match burns. e. water evaporates from an open container on a dry day (low humidity).
A woman enters the room, so choice (b) is accurate. Immediately after, individuals on the opposite side of the room may smell her perfume.
Why can we smell the perfume that someone inside the space sprayed?Diffusion: When fragrance particles mingle with air particles. The odorous gas's particles are free to move fast in any direction due to diffusion. So, a room fills with the scent of perfume.
What causes you to think someone has just left the room?We can smell perfume when we open a bottle of it in a room, even from a fair distance away. This is due to the perfume's gas moving from high concentration areas to low concentration areas when the bottle is opened.
To know more about smell visit:-
https://brainly.com/question/14454576
#SPJ1
what is the maximum amount of heat in joules that 23 grams of water at 95oc can lose before freezing completely?
23 grams of water at 95°C can lose a maximum of 8883.64 Joules of heat before freezing completely.
To answer your question, we need to calculate the heat loss required to lower the temperature of 23 grams of water from 95 degrees Celsius to 0 degrees Celsius, which is the freezing point of water. The specific heat capacity of water is 4.184 Joules per gram per degree Celsius.
So, the initial energy of the water is:
E1 = m x c x ΔT
E1 = 23 g x 4.184 J/g°C x (95°C - 0°C)
E1 = 8883.64 J
Where E1 is the initial energy of the water, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.
The final energy of the water at 0°C is:
E2 = m x c x ΔT
E2 = 23 g x 4.184 J/g°C x (0°C - 0°C)
E2 = 0 J
So, the maximum amount of heat in joules that 23 grams of water at 95°C can lose before freezing completely is:
ΔE = E1 - E2
ΔE = 8883.64 J - 0 J
ΔE = 8883.64 J
Learn more about joules here: brainly.com/question/25982371
#SPJ11
The density of chlorine (Cl2) gas at 25°C and 60. kPa is __________ g/L.204.91.70.860.58
the density of chlorine (Cl2) gas at 25°C and 60. kPa is approximately 1.40 g/L.The closest answer choice is 1.70 g/L, but the correct answer is actually 1.40 g/L.
To calculate the density of chlorine (Cl2) gas, we can use the ideal gas law:
PV = nR
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
We can rearrange the equation to solve for the density, which is the mass per unit volume
density = (molar mass x pressure) / (gas constant x temperature)
The molar mass of Cl2 is 2 x 35.45 = 70.90 g/mol
Plugging in the values given in the problem, we get:
density = (70.90 g/mol x 60. kPa) / (8.31 J/mol·K x 298 K)
density = 1.40 g/
Learn more about chlorine here:
https://brainly.com/question/14962130
#SPJ11
we must perform dilutions of absorbance values above 1.00 since not enough light is getting through the sample as it is heavily concentrated with solutes question 7 options: true false
True. Absorbance values above 1.00 indicate that the sample is heavily concentrated with solutes, which can limit the amount of light that passes through the sample.
Dilution is necessary to reduce the concentration of solutes in the sample and allow more light to pass through, enabling accurate measurement of the absorbance values.
Dilution involves adding a solvent to the sample to decrease its concentration while maintaining the same proportion of solutes. The diluted sample can then be re-analyzed to obtain absorbance values within the linear range of the spectrophotometer.
It is important to note that proper dilution factors must be calculated and applied accurately to avoid errors in the final results. Dilution is a commonly used technique in many scientific fields, including biochemistry, molecular biology, and environmental science.
To learn more about : solutes
https://brainly.com/question/25326161
#SPJ11
How many 1H NMR signals does CH3OCH2CH(CH3)2 show? How many^1H NMR signals does CH_3OCH_2CH(CH_3)_2 show? Enter your answer in the provided box.
.......................
The number of the NMR signals compound CH3OCH2CH(CH3)2 shows are:
3 H with singlet.6 H with doublet.1 H with muliplet.2 H with doublet.A spectroscopic method for observing the local magnetic fields around atomic nuclei is nuclear magnetic resonance spectroscopy, sometimes referred to as magnetic resonance spectroscopy (MRS) or NMR spectroscopy.
This spectroscopy's foundation is the measurement of electromagnetic radiations' absorption in the radio frequency range between 4 and 900 MHz. Nuclear Magnetic Resonance Spectroscopy is the name given to the form of spectroscopy that is used to measure the absorption of radio waves in the presence of a magnetic field.
The sample is put in a magnetic field, and the nuclear magnetic resonance (NMR) signal is generated by radio waves excitation of the sample's nuclei, which is detected by sensitive radio receivers.
Learn more about NMR signals:
https://brainly.com/question/30583972
#SPJ4
The number of the NMR signals compound CH3OCH2CH(CH3)2 shows are:
3 H with singlet.
6 H with doublet.
1 H with muliplet.
2 H with doublet.
A spectroscopic method for observing the local magnetic fields around atomic nuclei is nuclear magnetic resonance spectroscopy, sometimes referred to as magnetic resonance spectroscopy (MRS) or NMR spectroscopy.
This spectroscopy's foundation is the measurement of electromagnetic radiations' absorption in the radio frequency range between 4 and 900 MHz. Nuclear Magnetic Resonance Spectroscopy is the name given to the form of spectroscopy that is used to measure the absorption of radio waves in the presence of a magnetic field.
The sample is put in a magnetic field, and the nuclear magnetic resonance (NMR) signal is generated by radio waves excitation of the sample's nuclei, which is detected by sensitive radio receivers.
Learn more about NMR signals:
brainly.com/question/30583972
#SPJ11
k of 0.02911(m hr). if the initial concentration is 3.13 m, what is the concentration after 3.00 hours? your answer should have three significant figures (round your answer to two decimal places).
The concentration after 3.00 hours is 2.88 m.
To solve this problem, we will use the formula for the rate of a first-order reaction:
rate = k[A]
where k is the rate constant and [A] is the concentration of the reactant. We are given k = 0.02911(m/hr) and [A] = 3.13 m. We want to find the concentration after 3.00 hours, which we'll call [A'].
We can use the integrated rate law for a first-order reaction:
ln[A'] = -kt + ln[A]
where ln is the natural logarithm. Plugging in the given values, we get:
ln[A'] = -0.02911(m/hr) * 3.00 hr + ln[3.13 m]
Simplifying, we get:
ln[A'] = -0.08733 + 1.147
ln[A'] = 1.059
To solve for [A'], we'll take the inverse natural logarithm of both sides:
[A'] = e^(1.059)
[A'] = 2.884
Rounding to three significant figures, we get:
[A'] = 2.88 m
To learn more about : concentration
https://brainly.com/question/28564792
#SPJ11
when 0.0507 moles of iron(iii) chloride are dissolved in enough water to make 480 milliliters of solution, what is the molar concentration of chloride ions? answer in units of mol/l.
The molar concentration of chloride ions in the solution is 0.3169 mol/L
To find the molar concentration of chloride ions in the solution, we need to consider the mole-to-ion ratio of iron(III) chloride (FeCl₃) and then use the volume of the solution.
1 mole of FeCl₃ dissociates into 3 moles of chloride ions (Cl⁻) in solution. So, for 0.0507 moles of FeCl₃, the number of moles of Cl⁻ ions will be:
0.0507 moles FeCl₃ × (3 moles Cl⁻ / 1 mole FeCl₃) = 0.1521 moles Cl⁻
Now, we have 480 milliliters of solution, which is equivalent to 0.480 liters. To find the molar concentration of chloride ions, divide the moles of Cl⁻ by the volume of the solution in liters:
0.1521 moles Cl⁻ / 0.480 L = 0.3169 mol/L
So, the molar concentration of chloride ions in the solution is 0.3169 mol/L.
Know more about molar concentration here:
https://brainly.com/question/26255204
#SPJ11
what happens if plasma and gas mix together
an 80 proof bottle of vodka is equal to ___ bv.
An 80-proof bottle of vodka is equal to 40% alcohol by volume (ABV).
Proof, which is twice the percentage of alcohol by volume (ABV), is a unit of measurement for the amount of alcohol in a liquid. As a result, 40% of the content of an 80-proof bottle of vodka is alcohol. Accordingly, only 40% of the liquid in the bottle is actual alcohol, while the other 60% is made up of water and other chemicals.
The ABV of a bottle of alcohol is crucial to understand since it establishes the potency and potential consequences of the beverage. Drinks with a higher ABV are stronger and may affect the body more strongly.
Learn more about alcohol:
brainly.com/question/28404655
#SPJ4
Please helppppp!!! Like quick pleaseee
Container | Bodies | Cylinders | Tires | Engines | Max. Number of Completed Cars | Limiting Part
A | 3 | 10 | 9 | 2 | 2 | Engines
B | 50 | 12 | 50 | 5 | 2 | Cylinders
C | 16 | 16 | 16 | 16 | 2 | Cylinders
D | 4 | 9 | 16 | 6 | 1 | Engines
E | 20 | 36 | 40 | 24 | 4 | Engines
How to determine amount of race car parts?8. For container B, the limiting part is the cylinders, since only 12 cylinders are available and each car requires 8 cylinders. Therefore, the maximum number of complete cars that can be built is 12/8 = 1.5, or 1 car.
For container C, all parts are equal and no part limits the number of cars that can be built. The maximum number of complete cars that can be built is limited by the number of cylinders, which is 16. Each car requires 8 cylinders, so we can make a maximum of 16/8 = 2 complete cars.
For container D, the limiting part is the engines, since only 6 engines are available and each car requires 1 engine. Therefore, the maximum number of complete cars that can be built is 6.
For container E, the limiting part is the engines, since only 24 engines are available and each car requires 1 engine. Therefore, the maximum number of complete cars that can be built is 24.
Each group member should show their work for the container(s) they were responsible for and explain how they determined the limiting part.
9. a. To determine the number of race cars the Zippy Race Car Company can build, we need to find the limiting part. Since the inventory of each part is given in "oodles," we don't need to know the exact number of parts in an oodle to determine which part is limiting.
We can see that we have enough bodies and tires to build more than 8 oodles of cars, but we only have enough cylinders to build 5 oodles and enough engines to build 8 oodles. Therefore, the limiting part is the cylinders, and the maximum number of complete cars that can be built is 5 oodles.
b. It is not necessary to know the number of parts in an "oodle" because we are only comparing the quantities of each part to determine which one is limiting. The actual number of parts in an oodle doesn't matter as long as we know the relative quantities of the parts.
10. No, the component with the smallest number of parts is not always the one that limits production. In Question 8, for example, container C has an equal number of each part, but the number of cylinders limits production. It depends on the ratio of the quantities of each part needed to make a complete product, as well as the total quantity of each part available.
Find out more on limiting reagents here: https://brainly.com/question/14222359
#SPJ1
Calculate the ΔH for this reaction: C₂H4 (g) + H₂ (g) → C₂H6 (g). (10 points)
ΔH°f C₂H4 (g) = 52.5 kJ/mol
ΔH°f C₂H6 (g) = -84.7 kJ/mol
The enthalpy of the reaction as seen from the calculations is - 137.2 kJ/mol.
What is the enthalpy change of the reaction?To determine the enthalpy change of a reaction, we need to know the difference between the enthalpy of the products and the enthalpy of the reactants. This difference is known as the enthalpy change or the heat of reaction.
The enthalpy change of a reaction can be calculated using the following formula:
ΔH = ΣnΔHf(products) - ΣmΔHf(reactants)
where ΔH is the enthalpy change of the reaction, n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔHf is the standard enthalpy of formation of the species.
Enthalpy of reaction = Enthalpy of products - Enthalpy of reactants
(-84.7) -(52.5 + 0)
- 137.2 kJ/mol
Learn more about enthalpy change:https://brainly.com/question/29556033
#SPJ1
A 2.06 g solid sample of an unknown monoprotic acid was dissolved in distilled
water to produce a 35.0 mL solution at 25°C. This solution was then titrated with
0.300 M NaOH. The equivalence point was reached when 48.73 mL of 0.300 M
NaOH were delivered.
a. Find the number of moles of acid in the solid sample.
b. Find the molar mass of the unknown acid.
the molar mass of the unknown acid is approximately 141.1 g/mol.
a. To find the number of moles of acid in the solid sample, we first need to calculate the number of moles of NaOH used in the titration. We can do this using the equation:
moles NaOH = M NaOH x V NaO
where M NaOH is the molarity of the NaOH solution, and V NaOH is the volume of NaOH solution used at the equivalence point.
Substituting the given values, we get
moles NaOH = 0.300 mol/L x 0.04873 L = 0.014619 mol
Since NaOH and the unknown acid react in a 1:1 mole ratio, the number of moles of acid in the sample is also 0.014619 mol.
b. To find the molar mass of the unknown acid, we can use the equation
molar mass = mass of sample / number of moles of acid
Substituting the given values, we get:
molar mass = 2.06 g / 0.014619 mol = 141.1 g/mol
Learn more about molar here:
https://brainly.com/question/8732513
#SPJ11
The number of moles in the acid is 0.014619 moles and the molar mass of the unknown monoprotic acid is 140.92 g/mol.
How to calculate the number the moles in acid?
To find the number of moles of acid in the solid sample, first determine the moles of NaOH used in the titration. You can do this using the formula:
moles = volume (L) × concentration (M)
moles of NaOH = 48.73 mL × (1 L / 1000 mL) × 0.300 M = 0.014619 moles
Since it's a monoprotic acid, the moles of the acid are equal to the moles of NaOH at the equivalence point:
moles of acid = 0.014619 moles
b. To find the molar mass of the unknown acid, use the formula:
molar mass = mass of the sample (g) / moles of the acid
molar mass = 2.06 g / 0.014619 moles = 140.92 g/mol
So, the molar mass of the unknown monoprotic acid is approximately 140.92 g/mol.
To know more about Molar Mass:
https://brainly.com/question/29509963
#SPJ11
PLEASE HELPPPPPPPPPP!!!
The number of moles of the gas is about 1.37 moles.
What is the ideal gas equation?The ideal gas equation relates the pressure, volume, temperature, and number of moles of an ideal gas in a closed system. The gas constant (R) is a proportionality constant that relates these four variables.
It is important to note that the ideal gas equation is only applicable to ideal gases, which are hypothetical gases that obey certain assumptions such as having no intermolecular forces and occupying no volume. Real gases deviate from these ideal behaviors under certain conditions, and thus the ideal gas equation may not accurately describe their behavior.
Knowing that;
PV = nRT
n = PV/RT
n = 1.35 * 25/0.082 * 300
n = 33.75/24.6
n = 1.37 moles
Learn more about ideal gas equation:https://brainly.com/question/28837405
#SPJ1
the sds for 1-octanol is provided here. (links to an external site.) is 1-octanol a combustible liquid?
True. 1-octanol is a combustible liquid with a flashpoint of 86°C and an auto-ignition temperature of 258°C, according to the provided SDS.
The SDS (Safety Data Sheet) for 1-octanol indicates that it is a combustible liquid. According to the SDS, 1-octanol has a flashpoint of 86°C (187°F) and an auto-ignition temperature of 258°C (496°F). These values suggest that 1-octanol can easily ignite in the presence of an ignition source and may burn at relatively low temperatures. Additionally, the SDS provides information on the fire and explosion hazards associated with 1-octanol and recommends appropriate handling procedures and precautions to minimize the risk of fire or explosion. Therefore, it is important to handle 1-octanol with care and follow appropriate safety protocols when working with this substance.
To learn more about combustible liquid, refer:
https://brainly.com/question/28222891
#SPJ4
The complete question is:
the SDS for 1-octanol is provided here. (links to an external site.) is 1-octanol a combustible liquid? True or False.
Which has more atoms: one mole of helium or one mole of lead?
Answer:
They're equal.
Explanation:
Giving an idea let's use the question:
How big would a box be that holds one mole of helium?This would depend on the temperature and pressure conditions that the helium gas is being stored under.
You see, gases have no fixed volume. They will expand when the temperature increases and/or the applied pressure decreases. On the other hand, the gas will contract when cooled or pressure is applied. So one mole of helium could occupy almost any volume, depending on how much you compress it or how cool you keep it.
However, if your helium gas is stored under standard temperature and pressure conditions (STP)(0 C and 101.3 kPa), then it would fill a box with a volume of 22.4 L. This volume is known as the standard molar volume and is the same for any gas at STP.
I will let you come up with a set of dimensions for a box that could satisfy this volume.
mercury has the widest variation in surface temperatures between night and day of any planet in the solar system.
Mercury has the widest variation in surface temperatures between night and day of any planet in the solar system.
This statement is true. Mercury experiences the greatest temperature variation between night and day due to several factors. The main reasons are its proximity to the Sun, slow rotation, and lack of atmosphere.
During the daytime, temperatures on Mercury can reach up to 800°F (430°C) due to its close proximity to the Sun. This extreme temperature difference is due to the fact that Mercury's thin atmosphere is unable to regulate temperature and its slow rotation causes one side of the planet to be constantly facing the sun while the other is in perpetual darkness.
At night, temperatures can drop as low as -290°F (-180°C) because of its slow rotation and the lack of an atmosphere to retain heat. This results in the widest variation in surface temperatures between night and day of any planet in our solar system.
To know more about Mercury Variations in surface temperature:
https://brainly.com/question/16117265
#SPJ11
Mercury indeed has the widest variation in surface temperatures between night and day of any planet in the solar system. This is primarily due to its thin atmosphere, which cannot effectively retain heat, leading to extreme temperature fluctuations.
Mercury, being the closest planet to the sun, experiences extreme variations in temperature between its day and night sides. During the day, when the sun is overhead, the surface temperature on Mercury can rise to a scorching 430°C (800°F), which is hot enough to melt lead. However, as Mercury rotates and the sun sets, the temperature drops drastically to as low as -180°C (-290°F) at night.
The main reason for this extreme temperature variation is that Mercury has no atmosphere to regulate its surface temperature. Unlike Earth, which has an atmosphere that helps to distribute heat around the planet, Mercury's surface is directly exposed to the sun's radiation. This means that when the sun is shining on Mercury's surface, it heats up quickly and intensely, causing the temperature to rise to extreme levels.
Overall, the lack of an atmosphere and Mercury's proximity to the sun are the main factors contributing to the extreme temperature variations on the planet.
Learn more about atmosphere here:
https://brainly.com/question/11192430
#SPJ11
who thought that everything in the world was either substance or a characteristic of substance?
The philosopher who thought that everything in the world was either a substance or a characteristic of substance was Aristotle. He believed that substances were the fundamental entities of the world, and their properties were characteristics of these substances.
The philosopher Aristotle is credited with the belief that everything in the world was either a substance or a characteristic of the substance. He believed that substances were the basic building blocks of reality and that all other things, such as qualities or quantities, were dependent on substances for their existence. This belief has significantly influenced Western philosophy and continues to be discussed and debated today.
Learn more about characteristics of substances at https://brainly.com/question/4916153
#SPJ11
The philosopher Aristotle believed that everything in the world was either a substance or a characteristic of the substance.
He argued that substances were the fundamental building blocks of reality, while characteristics were the properties or attributes that substances possessed. According to Aristotle, substances were the primary entities in the world, and all other things could be explained in terms of their relationship to substances.
According to Aristotle, substances were the fundamental entities that made up reality, and characteristics, or "accidents," were the qualities that could be attributed to substances. This view became influential in the Western philosophical tradition and was the dominant way of thinking about ontology for many centuries.
To learn more about substance, refer:-
https://brainly.com/question/8242848
#SPJ11
you have 400 grams (g) of a substance with a half life of 10 years. how much is left after 100 years?
After 100 years, there will be 6.25 grams of the substance remaining.
What is half life?Half-life is the time it takes for half of the radioactive atoms in a sample to decay or for the concentration of a substance to decrease by half.
Amount remaining = initial amount x (1/2)^(number of half-lives)
In this case, half-life of the substance is 10 years, which means that after 10 years, half of the substance will have decayed. After another 10 years (20 years total), half of remaining substance will decay, leaving 1/4 of the original amount. After another 10 years (30 years total), half of that remaining amount will decay, leaving 1/8 of the original amount. This process continues every 10 years.
To find the amount of substance remaining after 100 years, we need to know how many half-lives have occurred in that time: 100 years / 10 years per half-life = 10 half-lives
Amount remaining = 400 g x (1/2)¹⁰= 6.25 g
Therefore, after 100 years, there will be 6.25 grams of the substance remaining.
To know more about half life, refer
https://brainly.com/question/25750315
#SPJ1
after being exposed to an organophosphate insecticide, a landscaping worker presents to the emergency department. decontamination should begin with which step?
After being exposed to organophosphate insecticide, Decontamination should begin with : C. Place the patient in a well-ventilated, isolated area.
What should be done after being exposed to organophosphate insecticide:
For the safety of other patients and staff members, place the patient in a well-ventilated and isolated area for decontamination. After donning personal protective equipment, gloves and goggles, carefully remove patient's clothing. Then brush off the insecticide, if it was of a dry type.
Decontaminate patient with copious amount of water. Do not apply any neutralizing agent because it may cause exothermic reaction that produces heat.
To know more about Organophosphate insecticide:
brainly.com/question/28547821
#SPJ4
Complete question:
After being exposed to an organophosphate insecticide, a landscaping worker presents to the emergency department. Decontamination should begin with which step?
A. Brush the insecticide off the patient.
B. Remove the patient's clothing.
C. Place the patient is a well-ventilated, isolated area.
D. Apply a neutralizing agent.
a sample of nobr was placed on a 1.00l flask containing no no or br 2 at equilibrium the flask contained
At equilibrium, the concentrations of NO, Br2, and NOBr in the flask will remain constant. However, without specific values for the initial concentration of NOBr or the equilibrium constant (Kc), it's not possible to determine.
.Based on the provided information, it seems that a sample of NOBr was placed in a 1.00 L flask at equilibrium, which means that the NOBr has decomposed into NO and Br2.
At equilibrium, the concentrations of NO, Br2, and NOBr in the flask will remain constant. However, without specific values for the initial concentration of NOBr or the equilibrium constant (Kc), it's not possible to determine the exact concentrations of these substances in the flask.
Visit here to learn more about equilibrium : https://brainly.com/question/4289021
#SPJ11
A sample of NOBr being placed in a 1.00 L flask containing no NO or Br2 at equilibrium, I'll first provide the balanced chemical equation for the reaction:
[tex]2 NOBr (g) ⇌ 2 NO (g) + Br2 (g)[/tex]
At equilibrium, the concentrations of the reactants and products remain constant. To determine the concentrations of NOBr, NO, and Br2 at equilibrium, we need to follow these steps:
1. Write the expression for the equilibrium constant (Kc) based on the balanced chemical equation:
[tex]Kc = [NO]^2 [Br2] / [NOBr]^2[/tex]
2. Set up an ICE (Initial, Change, Equilibrium) table to determine the equilibrium concentrations of the species involved in the reaction. The initial concentrations of NO and Br2 are 0 since they are not initially present in the flask.
NOBr NO Br2
I C0 0 0
C -2x +2x +x
E C0-2x 2x x
3. Substitute the equilibrium concentrations from the ICE table into the Kc expression:
[tex]Kc = (2x)^2 * x / (C0-2x)^2[/tex]
4. To solve for x, you need the value of Kc for the reaction. Look up the Kc value for this reaction in a reference or use provided information. Once you have Kc, substitute it into the equation and solve for x.
5. Calculate the equilibrium concentrations of NOBr, NO, and Br2 by substituting the value of x back into the ICE table:
[NOBr] = C0-2x
[NO] = 2x
[Br2] = x
By following these steps, you can determine the concentrations of NOBr, NO, and Br2 in the 1.00 L flask at equilibrium.
To know more about equilibrium constant (Kc):
https://brainly.com/question/29260433
#SPJ11
5. referring to the article of the crystal structure of acetylsalicylic acid published by j.d. bauer et. al in 2010. what solvent was used to grow the crystals?5. referring to the article of the crystal structure of acetylsalicylic acid published by j.d. bauer et. al in 2010. what solvent was used to grow the crystals?
According to the article published by J.D. Bauer et. al in 2010, the solvent used to grow the crystals of acetylsalicylic acid was ethanol.
The process of crystal growth involves dissolving the compound in a suitable solvent and then allowing it to slowly evaporate under controlled conditions to form well-defined crystals. Ethanol is a commonly used solvent for the growth of crystals due to its ability to dissolve a wide range of compounds, including organic molecules like acetylsalicylic acid.
The use of ethanol as a solvent for crystal growth of acetylsalicylic acid was carefully chosen to ensure that the crystals formed were of high quality and had a well-defined crystal structure. The crystal structure of acetylsalicylic acid is important because it determines the physical and chemical properties of the compound.
In conclusion, the use of ethanol as a solvent for the growth of acetylsalicylic acid crystals was a crucial step in the determination of the crystal structure of this important compound. The choice of solvent is an important factor to consider when growing crystals, as it can greatly affect the quality and properties of the crystals formed.
Know more about ethanol here:
https://brainly.com/question/281073
#SPJ11
Darlene is a dancer with ankle pain and a considerable amount of swelling. She
MOST LIKELY has what muscle disorder?
Define ΔHrxn and ΔHf. Which Part of the experiment demonstrated the change in enthalpy per mole of a reaction? Which Part of the experiment demonstrated the standard molar enthalpy of formation for a reaction?
ΔHrxn and ΔHf are measured by heat transfer in experiments. ΔHrxn measures enthalpy change per mole of a reaction, while ΔHf measures heat released when one mole of a compound forms from its elements in standard states. Experimentally, ΔHrxn measures change in enthalpy per mole of a reaction and ΔHf measures standard molar enthalpy of formation.
ΔHrxn is the change in enthalpy of a chemical reaction, which is measured at constant pressure and can be either endothermic (positive ΔHrxn) or exothermic (negative ΔHrxn).
ΔHf, on the other hand, is the standard molar enthalpy of formation, which is the enthalpy change that occurs when one mole of a compound is formed from its constituent elements in their standard states (most stable form at standard temperature and pressure).
In an experiment to measure ΔHrxn, the enthalpies of the reactants and products are measured directly and the difference is calculated. This can be done using calorimetry, where the heat transfer of the reaction is measured using a calorimeter. In an experiment to measure ΔHf, the enthalpy of a single reaction is measured and the number of moles of reactants used is known.
The part of the experiment that demonstrates the change in enthalpy per mole of a reaction would be the part where the enthalpy change is measured directly, which is used to calculate ΔHrxn. The part of the experiment that demonstrates the standard molar enthalpy of formation for a reaction would be the part where the number of moles of reactants used is known and the initial and final masses of the reactants and products are measured, which is used to calculate ΔHf.
To know more about enthalpy, here
brainly.com/question/13996238
#SPJ4
--The complete question is, What is the difference between ΔHrxn and ΔHf, and how are they measured experimentally? In an experiment to measure the enthalpy change of a reaction and the standard molar enthalpy of formation, which parts of the experiment would demonstrate each of these quantities?--
How many moles of caffeine, c8h10o2n4, are contained in a 100. Mg sample of caffeine? group of answer choices 0. 0085 0. 019 0. 51 0. 0028 0. 52
The number of moles of caffeine is 0.00052 mol
To calculate the number of moles of caffeine in a 100 mg sample, we need to use the formula:
moles = mass / molar massThe molar mass of caffeine (C₈H₁₀O₂N₄) is 194.19 g/mol. Converting the mass of the sample to grams (100 mg = 0.1 g), we can plug in the values and solve for moles:
moles = 0.1 g / 194.19 g/molmoles = 0.00052 molThe mole is widely used in stoichiometry calculations, which involve determining the amount of reactants needed to produce a certain amount of products or the amount of products produced from a certain amount of reactants. It is also used in the calculation of molar mass, which is the mass of one mole of a substance, and in the conversion between mass, moles, and number of entities in chemical reactions. Therefore, the number of moles of caffeine in a 100 mg sample of caffeine is 0.00052 moles.
To learn more about moles, here
https://brainly.com/question/26416088
#SPJ4
electrons can only gain energy by leaving the atom (creating an ion). electrons move between discrete energy levels, or escape the atom if given enough energy. electrons can have any energy below the ionization energy within the atom, or escape if given enough energy. electrons can have any energy within the atom, and cannot be given enough energy to cause them to escape the atom. electrons move between discrete energy levels within the atom, and cannot accept an amount of energy that causes them to escape the atom. 5 points saved question 7 the spectrum from an incandescent (with a filament) light bulb is a(n) continuous spectrum. emission line spectrum. absorption line spectrum.
The spectrum from an incandescent light bulb with a filament is a continuous spectrum. This means that the light emitted contains all colors of the visible spectrum, appearing as a smooth, uninterrupted rainbow
Electrons in an atom can only gain energy by leaving the atom and creating an ion. They can move between discrete energy levels or escape the atom if given enough energy. Electrons can have any energy below the ionization energy within the atom or escape if given enough energy.
However, electrons can have any energy within the atom and cannot be given enough energy to cause them to escape the atom. They move between discrete energy levels within the atom and cannot accept an amount of energy that causes them to escape the atom.
In contrast, an emission line spectrum appears as a series of bright lines against a dark background, while an absorption line spectrum appears as a series of dark lines against a bright background.
The type of spectrum emitted depends on the source of the light and the composition of the material emitting the light.
To learn more about : spectrum
https://brainly.com/question/2187993
#SPJ11
if you theoretically performed the bromination of phenol with only one equivalent of br2 which product do you think would predominate
The product that would predominate in the bromination of phenol with only one equivalent of Br2 is the para-bromophenol.
If the bromination of phenol was performed with only one equivalent of Br2, it is more likely that the para product would predominate due to steric hindrance effects that make it difficult for the ortho product to form. The reaction of phenol with Br2 is an electrophilic aromatic substitution where Br+ attacks the electron-rich aromatic ring.
The ortho position is sterically hindered by the presence of the bulky -OH group, making it difficult for the incoming Br+ ion to attack this position. On the other hand, the para position is less hindered, and the incoming Br+ ion can easily attack this position, leading to the predominance of the para product.
Although some ortho product may still form due to the statistical probability of the reaction, it would not be as significant as the para product.
To learn more about bromination of phenol, here
https://brainly.com/question/31325887
#SPJ4
The complete question is:
Had you performed the bromination of phenol with only one equivalent of Br2, which product (ortho or para) do you think would predominate? Hint: think about probability and statistics.
F-actin is a polymer of G-actin monomers and exhibits symmetry. (T/F)
F-actin is a polymer of G-actin monomers and exhibits symmetry is a False statement.
A class of globular, multifunctional proteins called actin creates the thin filaments in muscle fibrils as well as the microfilaments in the cytoskeleton. Its mass is around 42 kDa, and its diameter ranges from 4 to 7 nm; it is present in almost all eukaryotic cells, where it may be detected in concentrations of over 100 M.
The monomeric subunit of two different types of filaments in cells—thin filaments, a component of the contractile apparatus in muscle cells, and microfilaments, one of the three main elements of the cytoskeleton—is an actin protein. Both G-actin and F-actin, which are present either as a free monomer termed G-actin (globular) or as a component of a linear polymer microfilament known as F-actin (filamentous), are necessary for such crucial cellular processes.
Learn more about Actin:
https://brainly.com/question/23185374
#SPJ4
F-actin is a polymer of G-actin monomers and exhibits symmetry is a False statement.
A class of globular, multifunctional proteins called actin creates the thin filaments in muscle fibrils as well as the microfilaments in the cytoskeleton. Its mass is around 42 kDa, and its diameter ranges from 4 to 7 nm; it is present in almost all eukaryotic cells, where it may be detected in concentrations of over 100 M.
The monomeric subunit of two different types of filaments in cells—thin filaments, a component of the contractile apparatus in muscle cells, and microfilaments, one of the three main elements of the cytoskeleton—is an actin protein. Both G-actin and F-actin, which are present either as a free monomer termed G-actin (globular) or as a component of a linear polymer microfilament known as F-actin (filamentous), are necessary for such crucial cellular processes.
Learn more about Actin:
brainly.com/question/23185374
#SPJ11
What are the PEL levels for Sb51
PEL levels for a particular substance, such as Antimony, may vary depending on the country, jurisdiction, and specific industry or work environment.
What is PEL?"PEL" stands for "Permissible Exposure Limit," which is a term used in occupational health and safety regulations to denote the maximum amount or concentration of a hazardous substance that a worker may be exposed to over a specified time period without adverse health effects.
Therefore, it is important to refer to the relevant occupational health and safety regulations or guidelines in your specific area or industry for accurate and up-to-date information on the PEL levels for Antimony or any other hazardous substance.
These regulations are typically established by government agencies, such as the Occupational Safety and Health Administration (OSHA) in the United States or the Health and Safety Executive (HSE) in the United Kingdom.
Learn more about PEL levels here: https://brainly.com/question/5428869
#SPJ1
Boyle's Law: The pressure of a sample of He in a 1.00L container is 0.988atm, what is the new pressure if the sample is placed in a 2.00L container?
The new pressure of the helium gas in the 2.00 L container is 0.494 atm.
What is new pressure?
According to Boyle's Law, for a fixed amount of gas at a constant temperature, the pressure and volume of the gas are inversely proportional to each other.
Using Boyle's Law, we can write:
P1V1 = P2V2
where P1 and V1 are the initial pressure and volume of the gas, and P2 and V2 are the new pressure and volume of the gas, respectively.
Given that the initial pressure P1 is 0.988 atm and the initial volume V1 is 1.00 L, and the new volume V2 is 2.00 L, we can solve for the new pressure P2 as follows:
P1V1 = P2V2
0.988 atm × 1.00 L = P2 × 2.00 L
P2 = (0.988 atm × 1.00 L) / 2.00 L
P2 = 0.494 atm
Therefore, the new pressure of the helium gas in the 2.00 L container is 0.494 atm.
What is volume of the gas?
The volume of a gas refers to the amount of space that the gas occupies. The volume of a gas can be measured in a number of ways, depending on the conditions under which the gas is being measured.
At standard temperature and pressure (STP), which is defined as 0°C (273.15 K) and 1 atmosphere (atm) of pressure, the volume of 1 mole of any gas is 22.4 liters (L). This is known as the molar volume of a gas at STP.
The volume of a gas can vary depending on the temperature, pressure, and the amount of gas present. As a general rule, the volume of a gas will increase as the temperature increases and/or the pressure decreases, and will decrease as the temperature decreases and/or the pressure increases.
To know more about pressure, visit:
https://brainly.com/question/28988906
#SPJ1