mrs. hilt runs 3 1/2 miles every monday, wednesday, and friday. how many miles will she run in a month in which there are 4 mondays, 4 wednesdays, and 4 fridays?

The length of /BD/ in the similar shapes shown is 3.6.

Similar shapes are enlargements of each other using a scale factor.

Note: All the corresponding angles in the similar shapes are equal and the corresponding lengths are in the same ratio.

To calculate the length of BD, we use the formula below.

Note: ΔDAC is similar to ΔBAD

Formula:

From the question,

Given:

Substitute these values into equation 1 and solve for /BD/

Learn more about similar shapes here: https://brainly.com/question/29782860

#SPJ1

The simplified form of the expression one hole 2 upon 5 x 3 whole 2 upon 4 divided by one whole 7 upon 10​ is 14/17.

Convert all the mixed numbers to improper fractions:

2 upon 5 = 2/5

3 whole 2 upon 4 = (3 * 4 + 2) / 4 = 14/4 = 7/2

1 whole 7 upon 10 = (1 * 10 + 7) / 10 = 17/10

Rewrite the expression with the fractions:

(2/5 × 7/2) / (17/10)

Invert the divisor and multiply:

(2/5 × 7/2) × (10/17)

Simplify the fractions and multiply:

(2 × 7) / (5× 2)×  (10/17) = 14/10× 10/17 = 140/170

Reduce the fraction to its simplest form:

140/170 = 14/17

Therefore, the simplified form of the expression is 14/17.

To learn more on Expressions click:

https://brainly.com/question/14083225

#SPJ1

One hole 2 upon 5 x 3 whole 2 upon 4 divided by one whole 7 upon 10​, simplify the expression?

1. mean = average

2. variance means :

if everyone got a high or low score on a test then the variance is low or 0

variance means are there a lot of different test scores ?

if there are then the variance is high

variance = 1. each different number minus the average squared 2. add them all up 3. divide the total by the total number of numbers

3. square root of variance = standard deviation

standard deviation is like the distance between a person's house and their friend's house to see how far they typically have to travel.

answers :

mean= 4.64 , variance= -2.4596 ,  standard deviation = 1.57

steps

rewrite values

X, P(X)

1 , 0.05

2 , 0.12

3 , 0.21

4 , 0.33

5 , 0.48

Certainly! Here are the calculations for the mean, variance, and standard deviation of the payment made under this policy:

Mean (Expected value):

E(X) = (1 * 0.05) + (2 * 0.12) + (3 * 0.21) + (4 * 0.33) + (5 * 0.48)

E(X) = 0.05 + 0.24 + 0.63 + 1.32 + 2.40

E(X) = 4.64

Variance:

E(X^2) = (1^2 * 0.05) + (2^2 * 0.12) + (3^2 * 0.21) + (4^2 * 0.33) + (5^2 * 0.48)

E(X^2) = 0.05 + 0.48 + 1.26 + 5.28 + 12

E(X^2) = 19.07

Var(X) = E(X^2) - [E(X)]^2

Var(X) = 19.07 - (4.64)^2

Var(X) = 19.07 - 21.5296

Var(X) = -2.4596

Standard Deviation:

σ = sqrt(|Var(X)|)

σ ≈ sqrt(2.4596)

σ ≈ 1.57

Therefore, the mean of the payment made under this policy is 4.64, the variance is -2.4596, and the standard deviation is approximately 1.57.

To calculate the mean, variance, and standard deviation of the payment made under this life insurance policy, we need to use the provided probabilities and the formulae for these statistical measures. Here's how you can calculate them:

Step 1: Calculate the expected value (mean):

The mean, denoted by E(X), can be calculated by multiplying each value of X by its corresponding probability and summing them up. In this case, the formula is:

E(X) = (1 * P(X=1)) + (2 * P(X=2)) + (3 * P(X=3)) + (4 * P(X=4)) + (5 * P(X=5))

Plugging in the given values:

E(X) = (1 * 0.05) + (2 * 0.12) + (3 * 0.21) + (4 * 0.33) + (5 * 0.48)

E(X) = 0.05 + 0.24 + 0.63 + 1.32 + 2.40

E(X) = 4.64

So, the expected value or mean of the payment made under this policy is 4.64.

Step 2: Calculate the variance:

The variance, denoted by Var(X), can be calculated using the formula:

Var(X) = E(X^2) - [E(X)]^2

First, let's calculate E(X^2):

E(X^2) = (1^2 * P(X=1)) + (2^2 * P(X=2)) + (3^2 * P(X=3)) + (4^2 * P(X=4)) + (5^2 * P(X=5))

Plugging in the given values:

E(X^2) = (1^2 * 0.05) + (2^2 * 0.12) + (3^2 * 0.21) + (4^2 * 0.33) + (5^2 * 0.48)

E(X^2) = 0.05 + 0.48 + 1.26 + 5.28 + 12

E(X^2) = 19.07

Now, calculate the variance:

Var(X) = E(X^2) - [E(X)]^2

Var(X) = 19.07 - (4.64)^2

Var(X) = 19.07 - 21.5296

Var(X) = -2.4596

So, the variance of the payment made under this policy is -2.4596.

Step 3: Calculate the standard deviation:

The standard deviation, denoted by σ (sigma), is the square root of the variance. In this case, since the variance is negative, we take the absolute value before calculating the square root:

σ = sqrt(|Var(X)|)

Plugging in the calculated variance:

σ = sqrt(|-2.4596|)

σ ≈ sqrt(2.4596)

σ ≈ 1.57

So, the standard deviation of the payment made under this policy is approximately 1.57.

Chatgpt

The composite function k(t(x)) is -2.5 - 7(ln x)^2 + 3(ln x), and its derivative is -14ln x + 3/x.

To find the composite function k(t(x)), we substitute the expression for t(x) into the function k(t) as follows:

k(t(x)) = 4.5 + 3 - 7t(x)^2 + 3t(x) - 4

k(t(x)) = 4.5 + 3 - 7(ln x)^2 + 3(ln x) - 4

Simplifying this expression, we obtain:

k(t(x)) = -2.5 - 7(ln x)^2 + 3(ln x)

To find the derivative of the composite function, we use the chain rule as follows:

k'(t(x)) = k'(t) * t'(x)

where k'(t) is the derivative of the function k(t) with respect to t, and t'(x) is the derivative of the function t(x) with respect to x.

The derivative of k(t) with respect to t is:

k'(t) = -14t + 3

The derivative of t(x) with respect to x is:

t'(x) = 1/x

Substituting these expressions into the chain rule, we obtain:

k'(t(x)) = (-14t(x) + 3) * (1/x)

k'(t(x)) = (-14ln x + 3/x)

Therefore, the composite function k(t(x)) is -2.5 - 7(ln x)^2 + 3(ln x), and its derivative is -14ln x + 3/x.

To know more about derivative click here

brainly.com/question/29096174

#SPJ11

Answer:

No solution to any of the variables or equation

Step-by-step explanation:

The price that maximizes profit in this submarket is $10. (e) The firm's total economic profit can be found by subtracting total cost.

The total revenue schedule for the first submarket can be obtained by multiplying the price and quantity demanded in each row. The results are entered in the third column of the table below:

Quantity Price Total Revenue

0 20 0

1 19 19

2 18 36

3 17 51

4 16 64

5 15 75

The marginal revenue schedule can be obtained by calculating the change in total revenue when one more unit is sold. The results are entered in the fourth column of the table below:

Quantity Price Total Revenue Marginal Revenue

0 20 0 -

1 19 19 19

2 18 36 17

3 17 51 15

4 16 64 13

5 15 75 11

b. To maximize profit, the firm should produce where marginal cost equals marginal revenue.

Since marginal cost is constant and equal to $8, the profit-maximizing output level is where marginal revenue equals $8, which is at a quantity of 3. Therefore, the price that maximizes profit in this submarket is $17.

c. The demand schedule for the second submarket is given by the first two columns of the table below:

Quantity Price

0 12

1 11

2 10

3 9

4 8

5 7

d. The total revenue schedule and marginal revenue schedule for the second submarket can be obtained in the same way as in part a. The results are entered in the third and fourth columns of the table below:

Quantity Price Total Revenue Marginal Revenue

0 12 0 -

1 11 11 11

2 10 20 9

3 9 27 7

4 8 32 5

5 7 35 3

To maximize profit, the firm should produce where marginal cost equals marginal revenue.

Since marginal cost is constant and equal to $8, the profit-maximizing output level is where marginal revenue equals $8, which is at a quantity of 2. Therefore, the price that maximizes profit in this submarket is $10. e. The firm's total economic profit can be found by subtracting total cost

To know more about cost click here

brainly.com/question/19075809

#SPJ11

The Law of Sines and the Law of Cosines are essential mathematical tools in trigonometry that play a significant role in solving triangles and analyzing their properties.

The Law of Sines and the Law of Cosines enable us to solve triangles when we have limited information about their angles and sides. They provide formulas that relate the lengths of the sides of a triangle to the measures of its angles, or vice versa.

The Law of Sines is particularly important when dealing with the ambiguous case of solving triangles. This occurs when we have information about an angle, its opposite side, and one other side.

Find out more on the law of sines at https://brainly.com/question/30401249

#SPJ1

The expression that is equivalent to 135−−−√5–√ is: 131.764.

An equivalent expression is one that has the same value as another. To evaluate the given expression, the three minus signs all equate to -. So, the question is asking that we subtract the root of 5 from 135.

Also, the root of minus 1 will be subtracted from the answer that we arrive at.

135−−−√5 = 132.764

132.764 - √1 = 131.764

So, the decimal equivalent of this expression is 131.764.

Learn more about equivalent expressions here:

https://brainly.com/question/2972832

#SPJ1

The statement "The initial temperature inside the oven was 78 degrees" is true of the equation (option 3)

The equation T = 0.63s + 78 shows that the initial temperature inside the oven is 78 degrees. The temperature inside the oven increases by 0.63 degrees every second. So, after one minute (60 seconds), the temperature inside the oven would be 141 degrees. However, this is not stated in the equation.

Therefore the third statement if true of the equation (The initial temperature inside the oven was 78 degrees" is true of the equation)

Learn about temperature here https://brainly.com/question/27944554

#SPJ9

Complete question:

The equation T = 0.63s + 78 can be used to determine the temperature in degrees, inside an oven s seconds after the oven is turned on. Which statement relative to this equation is true?

1. The temperature inside the oven increased by 78 degrees every 63 seconds.

2. The temperature inside the oven in one minute was 141 degrees

3. The initial temperature inside the oven was 78 degrees.

C. If the conditional proposition p is a contingency, it means that there are some truth values of p that make the proposition true and others that make it false. To determine whether -p is also a contingency, we need to consider the truth values of -p for all possible truth values of p.

if we negate a contingency, there will still be some truth values that make the negation true and others that make it false. Therefore, at least one entry in the truth table for p will be T and at least one entry will be F. This means that -p is also a contingency.

if the conditional proposition p is a contingency, then -p is also a contingency because there will be some truth values of p that make the negation true and others that make it false. The correct answer to the question is C.

To know more about values visit:

https://brainly.com/question/30781415

#SPJ11

Answer: [tex](x+4)^2 + (y+2)^2 = 9[/tex]

Step-by-step explanation:

The general form for the equation of a circle is:

[tex](x-h)^2 + (y-k)^2 = r^2[/tex], where (h,k) is the center, and r is the radius:

We see the center to be at the point (-4,-2). and the radius can also be seen to be 3 units:

with this in mind:

[tex](x-(-4))^2 +(y-(-2))^2 = 3^2[/tex]

[tex](x+4)^2 + (y+2)^2 = 9[/tex]

you can select from the dropdowns accordingly.

The standard deviation for this probability distribution is 0.79. The standard deviation is a measure of the variability or spread of a probability distribution. It tells us how far the data is from the mean or expected value.

To calculate the standard deviation, need to calculate the expected value or mean of the distribution, which is given by:

E(x) = Σ(x * p(x))

where x is the possible number of defective computers and p(x) is the probability of x defective computers.

E(x) = (00.533333) + (10.233333) + (20.233333) + (30) = 0.7

Next, calculate the variance using the formula:

Var(x) = Σ[(x-E(x))^2 * p(x)]

Var(x) = (0-0.7)^2 * 0.533333 + (1-0.7)^2 * 0.233333 + (2-0.7)^2 * 0.233333 + (3-0.7)^2 * 0 = 0.49

Finally, the standard deviation is the square root of the variance:

SD = sqrt(Var(x)) = sqrt(0.49) = 0.7

Therefore, the standard deviation for this probability distribution is 0.79 when rounded to the nearest hundredth.

In summary, the standard deviation is a measure of the variability or spread of a probability distribution. It tells us how far the data is from the mean or expected value. To calculate the standard deviation, we need to first find the expected value, then the variance, and finally take the square root of the variance. In this problem, we used the given probabilities to calculate the expected value and variance and then found the standard deviation as 0.79.

Learn more about probability here: brainly.com/question/32117953

#SPJ11

After considering all the given data we conclude that the current measured temperature in degree Fahrenheit is 91°F, under the condition that the midday temperature in Palm Beach was 86 °F and the given expression is 86 -|-2-3| which represents current temperature.

To evaluate the temperature let us first consider the expression 86 -|-2-3| which represents the current temperature after 3 hours of temperature change of 2°F per hour from an initial temperature of 86°F.

The given expression can be again simplified as

86 -|-2-3| = 86 -|-5|

= 86 - (-5)

= 91°F

Hence, after evaluating we finally measured the current temperature as 91°F.

To learn more about Fahrenheit

https://brainly.com/question/30391112

#SPJ1

when running a line, in a right-triangle, from the 90° angle perpendicular to its opposite side, we will end up with three similar triangles, one Small, one Medium and a containing Large one.  Check the picture below.

[tex]\cfrac{24}{y}=\cfrac{y}{30}\implies 720=y^2\implies \sqrt{720}=y\implies 12\sqrt{5}=y\implies 26.83\approx y[/tex]

the coordinates of point S are (6, -18).To find the coordinates of points S and T, we need to use the midpoint formula.

Given that the midpoint of ST is (3, -6) and the coordinate of point T is (0, 6), we can calculate the coordinates of point S.

The midpoint formula states that the coordinates of the midpoint (M) of two points (P and Q) can be found using the following formula:

M = ((Px + Qx) / 2, (Py + Qy) / 2)

Let's substitute the given values into the formula:

(3, -6) = ((0 + Sx) / 2, (6 + Sy) / 2)

Simplifying the equation, we have:

3 = (0 + Sx) / 2    and    -6 = (6 + Sy) / 2

Multiplying both sides by 2, we get:

6 = 0 + Sx    and    -12 = 6 + Sy

Solving for Sx and Sy, we find:

Sx = 6    and    Sy = -18

Therefore, thethe coordinates of point S are (6, -18).

 To learn more about coordinates click here:brainly.com/question/22261383

#SPJ11

Hence, the probability of choosing 8 numbers that match 8 randomly selected balls when the balls are numbered 1 through 33 is given by (1/33)^8 x C(33,8) which is approximately equal to 0.000000206.

The probability of choosing 8 numbers that match 8 randomly selected balls when the balls are numbered 1 through 33 can be calculated using the formula for combination. There are a total of 33 balls and we need to choose 8 out of them. The total number of possible combinations of 8 balls out of 33 is given by C(33,8) which is equal to 69,090,840. Now, if we assume that all the balls are equally likely to be selected, then the probability of selecting a particular ball is 1/33. Therefore, the probability of choosing 8 specific balls out of 33 is (1/33)^8. Hence, the probability of choosing 8 numbers that match 8 randomly selected balls when the balls are numbered 1 through 33 is given by (1/33)^8 x C(33,8) which is approximately equal to 0.000000206. In other words, the probability of this event occurring is very low, which means it is very unlikely to happen.

To know more about probability visit:

https://brainly.com/question/30034780

#SPJ11

The function f(x) = (x - 9)(x + 9)x is an odd function.

Given the function in the question:

f(x) = (x - 9)(x + 9)x

To determine whether the function f(x) = (x - 9)(x + 9)x is even, odd, or neither, we need to check if it satisfies the conditions for even or odd functions.

An even function is symmetric with respect to the y-axis, meaning f(x) = f(-x) for all x in the domain.

An odd function is symmetric with respect to the origin, meaning f(-x) = -f(x) for all x in the domain.

Let's analyze the given function:

f(x) = (x - 9)(x + 9)x

f(x) = x³ - 81x

To check if it's even, we substitute -x for x:

f(x) = x³ - 81x

f(-x) = -x³ + 81x

Since -x³ + 81x is not equal to x³ - 81x, the function is not even.

To check if it's odd, find -f(x):

f(x) = x³ - 81x

-f(x) = -( x³ - 81x )

-f(x) = -x³ + 81x

Since  -x³ + 81x equals -x³ + 81x, the function is odd.

Learn more about functions here: https://brainly.com/question/29159673

#SPJ1

The most appropriate phrase that summarizes the most important aspect of survey design is option c. keep it simple.

Survey design requires careful consideration of various factors.

Such as the target population, the research objectives, the types of questions, and the mode of data collection.

However, the fundamental principle of survey design is to keep the survey simple and straightforward.

The survey should be easy to understand, answer, and navigate, ensuring that participants can complete it with ease and accuracy.

When designing a survey, it is essential to prioritize simplicity over complexity.

A survey that is too complicated or difficult to complete can discourage participation, lead to inaccurate responses, and result in biased data.

Therefore, survey designers should aim to create clear, concise, and unambiguous questions that are easy to comprehend and answer.

Survey design should prioritize simplicity, ensuring that the questions are easy to understand, answer, and navigate.

And the survey is straightforward and concise.

learn more about survey here

brainly.com/question/30504929

#SPJ4

The expression can be simplified as:

-9x² +  6x

An algebraic expression is an expression that is made up of variables and constants, along with algebraic operations like addition, subtraction, square root, etc.

The expression can be simplified by adding or subtracting like terms. That is:

3x³ + 9x² + 30x -3x³-18x² - 24x =  3x³-3x³ + 9x²-18x² + 30x -24x

                                                   = -9x² +  6x

Substituting x = -4, -2, 0 into -9x² +  6x:

x = -4:

-9x² +  6x = -9(-4)² +  6(4)

                = -144 + 24

                = -120

x = -2:

-9x² +  6x = -9(-2)² +  6(2)

                = -36 + 12

                = -24

x = 0:

-9x² +  6x = -9(0)² +  6(0)

                = 0

Learn more about algebraic expressions on:

brainly.com/question/4344214

#SPJ1

Answer: 1% off

Step-by-step explanation:

541 is about 99% of 454, leaving 1% discount

The 70th percentile of X is approximately 100.73.
P(X > 97)=0.9838
P(99 < X < 102)=0.7841


a. Using the Central Limit Theorem, we can assume that the sample mean follows a normal distribution with mean 100 and standard deviation 10/sqrt(50) = 1.41. Therefore,

P(99 < X < 102) = P((99 - 100)/(1.41) < (X - 100)/(1.41) < (102 - 100)/(1.41))

= P(-0.71 < Z < 1.41)

= 0.7841 (using standard normal table or calculator)

b. Using the same reasoning as in part (a),

P(X > 97) = P((X - 100)/(1.41) > (97 - 100)/(1.41))

= P(Z > -2.12)

= 0.9838 (using standard normal table or calculator)

c. To find the 70th percentile of X, we need to find the value x such that P(X < x) = 0.70. Using the same normal distribution with mean 100 and standard deviation 10/sqrt(50) = 1.41, we can find the z-score that corresponds to the 70th percentile:

P(Z < z) = 0.70 => z = 0.52

Then, using the formula (x - 100)/(1.41) = z, we can solve for x:

x = 100 + 0.52(1.41) = 100.73

Therefore, the 70th percentile of X is approximately 100.73.

Learn more about Central Limit Theorem here:-brainly.com/question/18403552

#SPJ11

Answer:

B. 25 m²

Step-by-step explanation:

área del trapecio= A= a+b/2 ×h

a=4, b= 6 and h=5

A=4+6/2×5

A= 10/2×5

A= 5×5

A=25 m²

Answer:

a. There are 720 different ways to arrange the bands. This can be calculated as 6! (6 factorial), which equals 6 x 5 x 4 x 3 x 2 x 1 = 720.

b. We can simplify the problem by treating bands 3 and 5 as a single entity that must be placed at the beginning and end of the lineup, respectively. That leaves four remaining bands, which can be arranged in 4! = 24 different ways. Therefore, there are 24 different ways to arrange the bands if band 3 is performing first and band 5 last.

The number of ways to arrange 6 bands is 720 (calculated as 6!). If the first and last bands are predetermined, the number of ways to arrange the remaining 4 bands is 24 (calculated as 4!).

This question pertains to the concept of permutations, a topic in Mathematics. In part a, with 6 bands to arrange in different ways, we are wanting to find the number of permutations of 6 items, which is calculated as 6 factorial (notated as 6!), which equals 720. Therefore, there are 720 different ways to arrange the 6 bands.

For part b, if band 3 must play first and band 5 must play last, we only need to find the distinct orderings of the remaining 4 bands, which is 4 factorial (notated as 4!). This equals 24. Consequently, while imposing these restrictions, there are 24 different ways to arrange the bands.

https://brainly.com/question/23283166

To find the probability of certain events, we can use the concept of combinations. Let's calculate the probabilities for the given scenario:

1. Probability of drawing two black marbles:

  There are 6 black marbles in the bag, so the probability of drawing one black marble on the first draw is 6/10. After removing one black marble, there are 5 black marbles left out of 9 total marbles. So, the probability of drawing a second black marble is 5/9. Since these events occur consecutively, we multiply the probabilities: (6/10) * (5/9) = 1/3.

2. Probability of drawing one black marble and one blue marble:

  Similar to the previous case, the probability of drawing a black marble on the first draw is 6/10. After removing one black marble, there are 4 blue marbles left out of 9 total marbles. So, the probability of drawing a blue marble is 4/9. Since there are two possible orders in which the marbles can be drawn (black first, blue second, or blue first, black second), we multiply the probabilities by 2: 2 * (6/10) * (4/9) = 8/15.

Please note that these probabilities assume that each marble has an equal chance of being drawn and that there is no bias in the selection process.

To learn more about Probability - brainly.com/question/14210034

#SPJ11

The y-intercept and the slope of the linear equation will be 2 and 50, respectively.

The linear equation is given as,

y = mx + c

Where m is the slope of the line and c is the y-intercept of the line.

The slope of the line is given as,

m = (y₂ - y₁) / (x₂ - x₁)

From the graph, the y-intercept is 50. Then the slope is calculated as,

m = (70 - 50) / (10 - 0)

m = 20 / 10

m = 2

More about the linear equation link is given below.

https://brainly.com/question/11897796

#SPJ1

The sentiment score for the review on forest.com would depend on the specific algorithm and weighting system used for the sentiment analysis.

However, a basic calculation could be done by assigning a numerical value to each positive and negative word (e.g. +1 for positive, -1 for negative) and adding them up. In this case, the sentiment score would be +1 (3 positive words) -2 (2 negative words) = -1. However, it's important to note that sentiment analysis is not always straightforward and can be influenced by factors such as context, sarcasm, and language nuances.

Learn more about sentiment here:

https://brainly.com/question/1832766

#SPJ11

The equilibrium wage rate is $6 per hour. This is found by observing the point where the labor demanded and labor supplied curves intersect, which is at a wage rate of $6 and a quantity of labor of 35.

In a competitive labor market, the equilibrium wage is the wage rate at which the quantity of labor demanded equals the quantity of labor supplied. In other words, it is the wage rate that clears the labor market.

To find the equilibrium wage in this problem, we need to compare the labor demanded and the labor supplied at each wage rate. We can see from the table that at a wage rate of $3 per hour, the labor demanded is 50 and the labor supplied is only 20.

This means that the quantity of labor demanded exceeds the quantity of labor supplied, and there will be upward pressure on the wage rate. As the wage rate increases, the quantity of labor demanded decreases and the quantity of labor supplied increases.

From the table, we can see that at a wage rate of $6 per hour, the quantity of labor demanded (35) equals the quantity of labor supplied (50), which is the equilibrium condition. Therefore, the equilibrium wage is $6 per hour.

To know more about equilibrium wage:

https://brainly.com/question/29222514

#SPJ4

--The given question is incomplete, the complete question is given below " Assume that the following data describe labor-market conditions:

Wage rate (per hour) $3 $4 $5 $6 $7 $8 $9 $10

Labor demanded 50 45 40 35 30 25 20 15

Labor supplied 20 30 40 50 60 70 80 90

Find the equilibrium wage.

Instructions: Enter your response as a whole number."--

Your answer: 8000000 different phone numbers are possible in the area code 503, with the first number not starting with a 0 or 1.

In an area code like 503, phone numbers have the format 503-XXX-XXXX. Since the first number cannot start with a 0 or 1, we have 8 choices (2-9) for the first digit. The remaining six digits can be any number from 0-9, giving us 10 choices for each.

To calculate the total possible combinations, multiply the choices together: 8 (for the first digit) * 10 (for the second digit) * 10 (for the third digit) * 10 (for the fourth digit) * 10 (for the fifth digit) * 10 (for the sixth digit) * 10 (for the seventh digit).

Learn more about combinations here:

brainly.com/question/19692244

#SPJ11

Answer:

62

Step-by-step explanation:

To find f(-5), we need to substitute x = -5 into the expression for f(x) and evaluate:

f(-5) = 3(-5)^2 + (-5) - 8

Simplifying this expression:

f(-5) = 3(25) - 5 - 8

f(-5) = 75 - 13

f(-5) = 62

Therefore, f(-5) = 62.