Answer:
It improves the texture of the flour
Explanation:
Flour is supposed to have a very fine texture. Commercial flour is not expected to occur in lumps. Lumps reduce the utility of the flour.
Hence, to improve the texture of the commercial flour, it is thoroughly sifted to ensure that there are no large lumps in the flour.This is so important when producing cake flour where the achievement of fine texture is of utmost priority.
correct name for Ti(SO4)2?
Answer:
Titanium(IV) Sulfide
Explanation:
A gas has a volume of 300 mL in a rigid container at 50oC and 1.75 atm. What will be its pressure at 100K?
Answer:
Its pressure will be 0.54 atm at 100 K.
Explanation:
Gay-Lussac's law indicates that, as long as the volume of the container containing the gas is constant, as the temperature increases, the gas molecules move faster. Then the number of collisions with the walls increases, that is, the pressure increases. That is, the pressure of the gas is directly proportional to its temperature.
Gay-Lussac's law can be expressed mathematically as the quotient between pressure and temperature equal to a constant:
[tex]\frac{P}{T} =k[/tex]
Studying two different states, an initial state 1 and a final state 2, it is satisfied:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 1.75 atmT1= 50 °C= 323 K (being 0 C=273 K)P2= ?T2= 100 KReplacing:
[tex]\frac{1.75 atm}{323 K} =\frac{P2}{100 K}[/tex]
Solving:
[tex]P2= 100 k*\frac{1.75 atm}{323 K}[/tex]
P2= 0.54 atm
Its pressure will be 0.54 atm at 100 K.
Which of the following is not a renewable source of energy?
1.) geothermal
2.) coal
3.) solar
4.) wind
2. Coal
It is non renewable energy source.
Answer: the answer would be coal
Explanation: hoped this helped!
Balance the chemical equation using the drop-down options.
CaC2 +
A H20 --->
Ca(OH)2
A C2H2 +
Answer:
CaC2 + 2H20 ⇋Ca(OH)2 + C2H2
Explanation:
CaC2 + A H20 ---> Ca(OH)2 + A C2H2
This is calcium carbide reacting with water to produce calcium hydroxide and ethyne commonly called acetylene.
Let's now balance the equation.
CaC2 + 2H20 ⇋Ca(OH)2 + C2H2
What are the two groups the animal kingdom is divided into?
Answer:
Taking the animal kingdom as an example, we can see that it is split into two clear groups: Invertebrates - animals without a backbone. Vertebrates - animals with a backbone.
Explanation:
which of the following examples where molecules are slightly far apart
A.rock
B.water
C.smoke
D.plasma ball
Answer:
in my opinion I think is D you don't have to choose it
Given the following electronic configurations, identify how many valence electrons each atom has.
A=
Element
Electron Configuration
Number
of
Valence
Electrons
B =
C=
Sodium
(Na)
152 2s 2p 3s
А
DONE
Oxygen (0)
1s 2s 2p
B
Iron (Fe)
1s 2s 2p 3s 3p 452
306
С
Answer:
sodium=atomic number 11 it electronic configuration is ,K=2, L=8,M=1 Valence is 1
oxygen= atomic number 8 it electronic configuration is K=2, L=6 Valence is 2
iron= atomic number 26 it electronic configuration is K= 2 L= 8,M=8 N=6 Valence 2
Answer: A=1
B=6
C=8
Explanation:
what is the k expression for this reaction? plz help !
Answer:
K = [HI]² / [H₂] [I₂]
Explanation:
To write the expression of equilibrium constant, K, it is important that we know how to obtain the equilibrium constant.
The equilibrium constant, K for a given reaction is simply defined as the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient. Thus, the equilibrium constant is written as follow:
K = [Product] / [Reactant]
Now, we shall determine the equilibrium constant for the reaction given in the question above. This can be obtained as illustrated below:
H₂(g) + I₂(g) —> 2HI (g)
K = [HI]² / [H₂] [I₂]
A Chemist reacted magnesium and aluminum oxide. A reaction takes place. Explain why
Explanation:
when Magnesium is reacted with Aluminum oxide, Aluminum being a less reactive metal than magnesium, is replaced by magnesium
Al2O3 + 3Mg - 3MgO + 2Al
hence reaction takes place
When the temperature of the water was 10°C the waterweed did not produce bubbles.
Suzi increased the temperature of the water in the water-bath to 20°C. The waterweed started to produce bubbles.
She waited two minutes before starting to count the bubbles.
Explain why she waited for two minutes before she started to count the bubbles.
Science
Explanation:
she could waited for the saturated vapour pressure to equal the prevailing atmospheric pressure
ergo boiling to take place seeing as she had gotten the first indication that boiling had started
Prokaryotic and eukaryotic cells have many different characteristics. One difference
between prokaryotic and eukaryotic cells is that all eukaryotic cells —
Answer:
Have a nucleus
Explanation:
Pls check..
Please help me ASAP!!!!
Answer:
Explanation:
Determine the balanced chemical equation for the chemical reaction.
Convert all given information into moles (most likely, through the use of molar mass as a conversion factor).
Calculate the mole ratio from the given information.
The student then takes a 1.00M stock solution of table sugar (sucrose C12H22O11) and mixes 0.305L of stock solution with additional distilled water to create a dilute solution with a total volume of 1.25L.
Explain how the student can determine the molarity of the resulting solution. Show a valid calculation for the final molarity. PLS HELP
Answer: The molarity of final solution is 0.244 M.
Explanation:
Given: [tex]M_{1}[/tex] = 1.00 M, [tex]V_{1}[/tex] = 0.305 L
[tex]M_{2}[/tex] = ?, [tex]V_{2}[/tex] = 1.25 L
Formula used to calculate the molarity f resulting solution is as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}\\1.00 M \times 0.305 L = M_{2} \times 1.25 L\\M_{2} = \frac{1.00 M \times 0.305 L}{1.25 L}\\= 0.244 M[/tex]
Thus, we can conclude that the molarity of final solution is 0.244 M.
You can prepare a buffer solution by combining equal moles of which pair of substances?
A. weak acid and its conjugate base
B. strong acid and a strong base
C. strong base and its conjugate acid
D. salt and a weak acid
Answer:
A. weak acid and its conjugate base
Explanation:
A buffer solution can be made with a weak acid and conjugate base or a weak base and conjugate acid.
This may help you:
https://chem.libretexts.org/Bookshelves/Physical_and_Theoretical_Chemistry_Textbook_Maps/Supplemental_Modules_(Physical_and_Theoretical_Chemistry)/Acids_and_Bases/Buffers/Introduction_to_Buffers
Consider the following reaction: 2 SO2(g) + O2(g) → 2SO3(g)
If the initial rate of change for sulfur dioxide is -2.00 M/min, what is the initial rate of change of oxygen?
A) -4.00 M/min
B) -1.00 M/min
C) 4.00 M/min
D) 1.00 M/min
Answer:
B) -1.00 M/min
Explanation:
Based on the reaction:
2 SO2(g) + O2(g) → 2SO3(g)
2 moles of SO2 are consumed per mole of O2 producing 2 moles SO3
In the problem, the sulfur dioxide has a rate of change of -2.00M/min. As the moles of oxygen that reacted are half the moles of SO2, its rate of change is halved, that is:
B) -1.00 M/minBase A dissociates 25% in water. Base B dissociates 50%. Base C dissociates
75%. Which base is the WEAKEST conductor of electricity?
Answer:Base A is the weakest conductor electricity
Explanation:
Dissociation is a factor that affects electrical conductivity. The greater the percentage of dissociation for bases the stronger the conductivity of electricity.
Given that
Base A dissociates 25% in water
Base B dissociates 50%.
Base C dissociates 75%
We can conclude that Base A is the weakest conductor oelectricity since it has the lowest percentage of dissociation.
What is the pressure of gas at 496 Liters and 200 Kelvin if the original pressure was 0.250 atm. at 300 liters and 400 kelvin?
Answer:
0.076 atm
Explanation:
Using the combined gas law formula;
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (atm)
P2 = final pressure (atm)
T1 = initial temperature (K)
T2 = final temperature (K)
V1 = initial volume (L)
V2 = final volume (L)
According to the information provided in this question;
P2 = ?
P1 = 0.250 atm
V2 = 496 L
V1 = 300 L
T2 = 200K
T1 = 400K
Using P1V1/T1 = P2V2/T2
0.250 × 300/400 = P2 × 496/200
75/400 = 496 P2/200
0.1875 = 2.48P2
P2 = 0.1875 ÷ 2.48
P2 = 0.076 atm
PLEASE HELP ASAP!!
WHAT IS THE CYCLE OF OZONE IN THE STRATOSPHERE?
A. UV splits an oxygen molecule into two oxygen atoms, which combine with a oxygen molecule to create ozone.
B. An ozone molecule splits into an oxygen molecule and an oxygen atom.
C. An ozone molecule forms from and then splits into two oxygen molecules and two oxygen atoms.
D. A & B
Which of the following lists describes characteristics of an acid?
Answer: Acids have a sour taste. Lemons, vinegar, and sour candies all contain acids. Acids change the color of certain acid-base indicators. Two common indicators are litmus and phenolphthalein. This are som Characteristics of acid.
Answer:
Sour tasteCorrosive (burn your skin and break down other materials)Increase the concentration of H+ when added to waterDissolve metalsDonate a hydrogen ionlow pHExplanation:
these are the characteristics of an acid.
hope this helps!
A gas diffuses 1/6 times faster than hydrogen gas (H2).
What is the molar mass of the gas? (5 points)
a
59.95 g/mol
b
66.54 g/mol
c
68.68 g/mol
d
72.58 g/mol
Answer:
72.58 g/mol
Explanation:
mark me brainless if I am ✅
The relationship between the rate of diffusion and the molar mass is given by Graham's law. A gas diffusing 1/6 times faster than hydrogen will have a molar mass of 72.58 g/mol. Thus, option d is correct.
What is Graham's law?Graham's law states the inverse relationship between the rate of diffusion and the square root of the molar mass of the gas. It is given as,
Rate = 1 ÷ √M
The molar mass of the gas that diffuses 1/6 times faster than hydrogen is calculated as,
R₁ ÷ R₂ = √ (M₂ ÷ M₁)
Here,
The molar mass of hydrogen = M₁
The molar mass of unknown gas = M₂
Rate of diffusion of hydrogen gas = R₁
Rate of diffusion of unknown gas = R₂ = 1 / 6 R₁
Substituting values:
R₁ ÷ 1/6 R₁ = √M₂ ÷ 2
6 × 1.414
= 8.485
= 84.85 g/mol ≈ 72.58 g/mol
Therefore, option d. 72.58 g/mol is the molar mass of unkown gas.
Learn more about Graham's law here:
https://brainly.com/question/19589867
#SPJ5
Definition: This is the energy that comes to Earth from the Sun.
Example: using the sun to dry your laundry hanging on the clothesline
Answer:
well to me it is called natural energy
A box is pushed at a constant speed of 1.5 m/s for 12 seconds using a force of 50 Newtons across the floor. Calculate the distance the box travelled using. *
Answer:
Distance = 18 meters
Explanation:
Given the following data;
Force = 50 N
Speed = 1.5 m/s
Time = 12 seconds
To find the distance travelled;
Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.
Mathematically, speed is given by the equation;
[tex]Speed = \frac{distance}{time}[/tex]
Making distance the subject of formula, we have;
Distance = speed * time
Substituting into the formula, we have;
Distance = 1.5 * 12
Distance = 18 meters
Additionally, to find the workdone;
Workdone = force * distance
Workdone = 50 * 18
Workdone = 900 Joules
A buffer solution is prepared by adding NaC2H2O2 to a solution of HC2H2O2 (acetic acid). HC2H3O2(aq) = H+ (aq) + C2H302 - (aq) What happens if KCl is added
Answer:
pH is not been modified. No changes.
Explanation:
Our buffer is made of acetic acid, a weak one and the salt from its conjugate base, sodium acetate.
NaC₂H₃O₂ → Na⁺ + C₂H₃O₂⁻
The acetate anion can make hydrolisis in water to produce acetic acid again.
C₂H₃O₂⁻ + H₂O ⇄ C₂H₃O₂H + OH⁻ Kb
KCl is neutral salt. When we dissociate it:
KCl → K⁺ + Cl⁻
Both ions come from a strong base and a strong acid. They won't make hydrolisis in water because they are conjugate weak acid and base
K⁺ + H₂O ← KOH + H⁺
Cl⁻ + H₂O ← HCl + OH⁻
These reactions can't be possible.
That's why it doesn't occur anything in our buffer, this salt does not give OH⁻ or H⁺ to medium to modify pH
URGENT: Identify the subatomic particles that determine the atomic number of an element.
Answer:
the number of protons determines the atomic number
Explanation:
Ex. Aluminum has 13 protons, so it's atomic number is 13
hope this helps :)
What is the role of a consumer in the flow of energy through a food chain?
Answer:
The role of consumers in an ecosystem is to obtain energy by feeding on other organisms and sometimes transfer energy to other consumers. Changes that affect consumers can impact other organisms within the ecosystem.
Explanation:
Hope this helped Mark BRAINLIEST!!!!
Consumers are organisms that obtain energy by eating other organisms. Consumers may consume either producers or other consumers. Consumers include animals.
What is food chain ?A food chain is a network of links in a food web that begins with producer organisms and ends with an apex predator, detritivore, or decomposer species.
A food chain also demonstrates how organisms are related to one another through the food they consume. Each trophic level is represented by a different level of a food chain.
Producers can produce their own food and energy, but consumers are not the same. Consumers are living things that must hunt, gather, and eat their food.
Thus, Consumers must eat in order to gain energy, or they will perish. Omnivores, carnivores, herbivores, and decomposers are the four types of consumers.
To learn more about the food chain, follow the link;
https://brainly.com/question/16065961
#SPJ6
Question is in picture! Due in 30 minutes!
Answer:
wheresthepicture.-
Explanation:
Answer:
don't see a picture
Explanation:
What is the mass of 2.053 moles of silver nitrate?
Answer:
Explanation:
Silver nitrate grams to moles
1 grams Silver Nitrate is equal to 0.0058867472248402 mole
Anyone know this question
Balancing Equations help (please explain)
Answer:
A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total charge is the same for both the reactants and the products. In other words, the mass and the charge are balanced on both sides of the reaction.
Explanation:
You will be marked as brainlest if you are able to solve this question
Answer:
See Explanation
Explanation:
1) According to the question, the reactivity of a metal is measured by the temperature of the solution after reaction. The higher the temperature of the solution, the greater the reactivity of the metal. Based on this criterion, the metals can be arranged in an order of reactivity as follows;
Mg> Zn > Fe.
2) The equation of the reaction is;
Mg(s) + 2H^+(aq) ------>Mg^2+(aq) + H2(g)
If we consider the changes in oxidation number from left to right;
The oxidation number of Mg changed from zero to +2
The oxidation number of H changed from +1 to zero
Recall that a redox reaction is a reaction in which the oxidation number of species changes from left to right in the reaction. Hence this reaction is a redox reaction.
The reducing agent experiences an increase in oxidation number. In this case, Mg is the reducing agent.
The oxidation half equation is;
Mg(s) ------> Mg^2+(aq) + 2e
The reduction half equation is;
2H^+(aq) + 2e ------> H2(g)