We use for fuel are hydrocarbons that burn easily in the presence of oxygen, Hydrogen and Carbon elements are found in these substances. These fossil fuels are found in the Earth’s crust and contain carbon and hydrogen, which can be burned for energy.
What is fossil fuel?
Fossil fuel is a hydrocarbon-containing substance formed naturally in the Earth's scab from the escapes of dead plants and animals that is liquid and burned as fuel. The major fossil fuels are coal, oil, and natural gas.
What is energy?
Energy is the quantitative possession that is changed to a body or to a physical system, identifiable in the performance of work and in the form of heat and light.
To know more about Fossil fuel, visit:-
https://brainly.com/question/10172005
#SPJ4
Explain why the balls representing fluorine and hydrogen have only one hole drilled in them, while oxygen has two and carbon has four.
Because carbon establishes four bonds to other atoms, whereas hydrogen and fluorine only form one, the balls used to symbolize these elements have four and oxygen has two holes and number of holes represent the number of bond formation, respectively.
Fluorine is univalent, which means it can only create one bond with hydrogen, whereas carbon is tetravalent and can establish up to four bonds. As a result, carbon has four holes while fluorine and hydrogen only have one. Each molecule of HF has one hydrogen atom that may form a hydrogen bond, while the fluorine atom possesses three lone pairs of electrons. The maximum amount of hydrogen atoms can form hydrogen bonds, and each HF molecule will typically form two hydrogen bonds.
To learn more about Bonds visit here : brainly.com/question/819068
#SPJ4
what atomic or hybrid orbitals make up the sigma bond between o and h in water, h2o? orbital on o orbital on h what is the approximate h-o-h bond angle?
Molecular Orbital of Water is H2O
Each hydrogen atom has a 1s orbital. Two of the O(2sp3) hybrid orbitals and 2 of the H(1s) orbitals combine to make 2 sigma bonding and 2 sigma antibonding molecular orbitals.In H2O hybridization orbitals having the same energy level will combine to form hybrid orbitals.The water molecule has two lone pairs and two bond pairs. Each O‒H covalent bond is called a sigma (σ) bond.H2O has a tetrahedral arrangement of molecules or an angular geometry. This is mainly because the repulsion from the lone pair combination is more than bond-pair repulsion. Additionally, the existing pairs do not lie in the same plane. One pair is below the plane and the other one is above. This bond geometry is commonly known as a distorted tetrahedron.
To lean more about Bond:
brainly.com/question/10777799
#SPJ4
consider the carbon monoxide molecule pictured below. note that the bond may be a single, double or triple bond. what can best be said about the electrons involved in the bond?
A bonding electron is more likely to exist in the domain tagged by Box B because the oxygen nucleus has a stronger enchantment for electrons than the carbon nucleus.
What is Electron?
An electron is a negatively charged subatomic molecule. It can be either free, or confined to the nucleus of an atom. Electrons in atoms exist in spherical coat of several radii, representing energy levels.
What is nucleus?
The nucleus has been plainly described as a membrane-bound structure that includes the genetic article of a cell.
To know more about Electron, visit:-
https://brainly.com/question/13998346
#SPJ4
why are boiling points of pure solids usually reported along with pressure at which the boiling point was measured
Boiling points of pure solids are usually reported along with pressure because boiling point is a function of pressure.
What is the boiling point?
The temperature at which a liquid's vapor pressure equals the pressure of the gas.
The temperature at which a pure liquid's vapour pressure reaches atmospheric pressure is known as the boiling point of the liquid.A pure liquid's normal boiling point is one that can only be determined at 1 atm of pressure. Therefore, the liquid's boiling point should always be given along with the pressure it was measured at.The temperature at which a solid transforms into a liquid under atmospheric pressure is known as the melting point of a pure solid.Therefore, melting point is something that is determined by measuring it at atmospheric pressure. Therefore, it is not required to describe the pressure and melting point of a pure solid.Pure solids' melting points are only influenced by the intermolecular forces they contain, not by how much of them are packed into a capillary.Different pressures will produce different boiling points for the same substance. The boiling point of a substance is the temperature at which its vapor pressure is equal to the ambient pressure surrounding it. For example, water has a boiling point of 100°C (212°F) at sea level, whereas at higher altitudes (higher pressures) the boiling point of water is lower.
To learn more about boiling point from the given link.
https://brainly.com/question/24675373
#SPJ4
what is the concentration of h2so4 if 12.3 ml of 0.200 m naoh solution is needed to neutralize 10.0 ml of h2so4 solution, ?
The concentration of h2so4 when 12.3 ml of 0.200 m naoh solution is needed to neutralize 10.0 ml of h2so4 solution is 0.123 M.
What is solution?
In chemistry, a solution is a homogeneous mixture of two or more compounds in their relative proportions that can be continually altered up to what is referred to as the limit of solubility. Although the word "solution" is frequently used to refer to the liquid state of matter, solutions of gases and solids are also possible.
Solutions come in many forms, such as sugar and salt solutions, soda water, etc. In a solution, each element appears as a separate phase.
The answer is 0.123 M because the molarity of a solution can be determined using the following equation:
Molarity = (moles of solute) / (volume of solution in liters)
For this problem, you need to calculate the moles of H2SO4 in 10.0 ml of the solution. To do that, you need to convert the volume to liters first. 10.0 ml = 0.010 L. Now, you can calculate the moles of H2SO4:
Moles of H2SO4 = (Molarity of H2SO4) x (0.010 L)
Moles of H2SO4 = 0.123 M x 0.010 L = 0.00123 moles
Now, you can calculate the molarity of the H2SO4 solution using the same equation as before:
Molarity of H2SO4 = (0.00123 moles) / (0.010 L)
Molarity of H2SO4 = 0.123 M
To learn more about solution
Here: https://brainly.com/question/11337199
#SPJ4
based on your knowledge of the spectrochemical series, how would expect sf 2 as a ligand to compare to nh 3?
The spectrochemical series of the ligands the more the strong field ligand the more will be the ∆o values so the cyanide is the most strong field ligand and the chloride is the weak field ligand.
What is spectrochemical series?
Common ligands are arranged in an increasing order of their crystal-field splitting energies (CFSE), which is known as a spectrochemical series. The series' strong field ligands are found on the R.H.S, whereas weak field ligands are found on the L.H.S.
What is ligand ?
In order to create a coordination complex, an ion or molecule known as a ligand must donate two electrons to the main metal atom or ion. The Latin origin of the word ligand is the verb to bind or tie. Anions, cations, as well as neutral molecules, can serve as ligands.
[Fe(CN)6]3- -----> 1
[Fe(H2O)6]3+ -----> 2
[Fe(Cl)6]3- -----> 3
According to the order of magnitude of crystal field stabilization energies the order of magnitude of the splitting is given above .
From the spectrochemical series of the ligands the more the strong field ligand the more will be the ∆o values so the cyanide is the most strong field ligand and the chloride is the weak field ligand and the water is in between them so the cyanide complex will have more ∆o value and aqua complex have the second ∆o value and the chloride complex have the third ∆o value in their order of magnitudes.
Therefore, spectrochemical series of the ligands the more the strong field ligand the more will be the ∆o values so the cyanide is the most strong field ligand and the chloride is the weak field ligand.
Learn more about spectrochemical series from the given link.
https://brainly.com/question/29653267
#SPJ4
Ryan made a mistake when signing his signature on a form, so he scribbles through it, making the signature unreadable. Has Ryan committed fraud?
A.
Yes, because any obliteration of a document is considered fraudulent.
B.
No, because generally obliteration isn’t considered fraudulent since the person is not attempting to hide the alteration.
C.
Yes, because he has done an erasure of a document, which could signal fraudulent activity.
D.
No, because Ryan is most likely underage since he made a mistake on his signature.
No, because obliteration isn't typically regarded as fraudulent since the alteration isn't being concealed (option -B) is correct answer.
What does signing a document mean?Signatures in the plural. One countable noun Your signature, which is simply your name written in your distinct style, is frequently placed at the end of a document to show that you either wrote it or that you agree with what it says.
On a piece of paper, sign your name. Take a picture of your handwritten signature using the camera app on your smartphone. Send the picture to your email address using your phone. After receiving the image, save it to your computer and then add it to your email.
To know more about signature on a form visit:
https://brainly.com/question/28340723
#SPJ1
nuclear decay occurs according to first-order kinetics. argon-37 decays with a rate constant of 0.0198 days–1. after 98.3 days, a sample has a mass of 2.14 g. what was the original mass of the sample?
The original mass of the sample is 15g
t = 2.303/k × log a/ a-z
k = rate constant = 0.0198 days–1
t = time passed by the sample = 98.3 days
a - x = amount left after decay process = 2.14
t = 2.303/k × log a/ a-z
the original mass of the sample a = 15g
The mass of a sample of a chemical compound is divided by the quantity of that substance, or the number of moles in the sample, measured in moles, to obtain the compound's molar mass in chemistry. In contrast to molecular properties, a substance's molar mass is a bulk property. The compound. is present in many different. forms, each with a different mass as a result of the isotopes. The molar mass represents the average of these masses. The molar mass is most frequently calculated from the standard atomic weights and is a function of the relative abundance of the constituent atoms' isotopes on Earth. It is thus a terrestrial average.
Learn more about mass here:
https://brainly.com/question/14651380
#SPJ4
which alkyl halide would form the most stable carbocation: isopropyl bromide, tert-butyl bromide, methyl bromide or ethyl bromid
T-butyl bromide alkyl halide would result in the formation of the most stable carbocation. The quantity of methyl groups bonded to the core carbon is often associated with carbocation stability.
A halide is what in chemistry?Halogens are a class of chemical compounds known as halides. There are halides in the natural world, and some of them, like salts and acids, are essential to sustaining life. Halides can be found in minerals, organisms, and plants. NaCl, or table salt, is the most widely used halide.
Why does halide group exist?The class of minerals known as halides includes the sodium, salt, and salts of hydrochloric acid. The crystals halite, sylvite, and carnallite are part of this group of minerals, and they exclusively include chloride that has petrogenic significance. Halite, another name for rock salt (NaCl).
To know more about Halide visit:
brainly.com/question/28384269
#SPJ4
a titration of 15.00ml of naoh requires 10.50ml of 0.450m h2so4 . what is the molarity of the naoh solution? 2naoh h2so4 --> na2so4 2h2o
A titration of 15 mL of NaOH requires 10.50 mL of 0.450 M H₂SO₄ . the molarity of NaOH solution is 0.53 M
The reaction is given as :
H₂SO₄ + 2NaOH -----> Na₂SO₄ + 2H₂O
molarity of H₂SO₄ = 0.450 M
volume = 10.50 mL = 0.01050 L
moles of H₂SO₄ = molarity × volume
= 0.450 × 0.0105
= 0.004 mol
moles of H₂SO₄ = 2 moles of NaOH
moles of NaOH = 2 × 0.004
= 0.008
molarity of NaOH = 0.008 / 0.015
= 0.53 M
The molarity of the NaOH solution with volume 15 mL is 0.53 M.
To learn more about molarity here
https://brainly.com/question/24195935
#SPJ4
If the bond angle between two adjacent hybrid orbitals is 180°, which is the hybridization?.
sp hybridization is observed when one s and one p orbital in the same main shell of an atom mix to form two new equivalent orbitals. The new orbitals formed are called sp hybridized orbitals. It forms linear molecules with an angle of 180°
-This type of hybridization involves the mixing of one ‘s’ orbital and one ‘p’ orbital of equal energy to give a new hybrid orbital known as an sp hybridized orbital.
-sp hybridization is also called diagonal hybridization.
-Each sp hybridized orbital has an equal amount of s and p character – 50% s and 50% p character.
HYBRIDIZATION : Redistribution of the energy of orbitals of individual atoms to give orbitals of equivalent energy happens when two atomic orbitals combine to form a hybrid orbital in a molecule. This process is called hybridization.
Learn more about hybridization
brainly.com/question/29689126
#SPJ4
how many moles of no₂ would be produced from 4.5 mol of o₂ in the reaction below assuming the reaction has a 57.0% yield? 2 no (g) o₂ (g) → 2 no₂ (g)
5.13 moles of NO₂ is produced from 4.5 moles of O₂, assuming the reaction has a 57% yield.
Given reaction:
2NO (g) + O₂ (g) → 2NO₂(g)
2mole 1 mole 2mole
Here,
1 mole of O₂ produces= 2 moles of NO₂
Therefore,
4.5 moles of O₂ will produce
= 2 × 4.5 moles
= 9 moles of NO₂
For 100 % yield, 9 moles of NO₂ is produced from 4.5 moles of O₂
Assuming the reaction has a 57% yield, number of moles of NO₂ produced is calculated as:
% yield= [tex]\frac{ actual yield}{ theoretical yield}[/tex] × 100%
57 = [tex]\frac{actual yield}{ 9 mole}[/tex] × 100%
actual yield = 9 moles × 57 /100
actual yield= 5.13 moles
Thus, 5.13 moles of NO₂ is produced from 4.5 moles of O₂
To know more about moles of NO₂ here
https://brainly.com/question/27926718
#SPJ4
Let r = x i + y j + z k and r = |r|. Let f = r/r p. (a) find div f. (give your answer in terms of r. ).
The value of div f is (3 - p)/r^p when r = x i + y j + z k and r = |r| and if we assume f = r/r^p.
It is given in the question that, r = x i + y j + z k and r = |r|.
We know that,
f = R/rp
f = <x, y, z> / |<x, y, z>|^p
f = <x/(x² + y² + z²)^(p/2), y/(x² + y² + z²)^(p/2), z/(x² + y² + z²)^(p/2)>;.
So, For finding div f, We need to take partial derivative:
div f = (d/dx) x/(x² + y² + z²)^(p/2) + (d/dy) y/(x² + y² + z²)^(p/2) + (d/dz) z/(x² + y² + z²)^(p/2)
Now, we need to use the rational derivative rule to find the derivatives:
div f = [1(x² + y² + z²)^(p/2) - x × px(x² + y² + z²)^(p/2 - 1)] / (x² + y² + z²)^p + [1(x² + y² + z²)^(p/2) - y × py(x² + y² + z²)^(p/2 - 1)] / (x² + y² + z²)^p + [1(x² + y² + z²)^(p/2) - z × pz(x² + y² + z²)^(p/2 - 1)] / (x² + y² + z²)^p
div F = (x² + y² + z²)^(p/2 - 1){[(x² + y² + z²) - px²] + [(x² + y² + z²) - py²] + [(x² + y² + z²) - pz²]} /(x² + y² + z²)^p
div f = [3(x² + y² + z² - p(x² + y² + z²)] / (x² + y² + z²)^(p/2 + 1)
div f = (3 - p) (x² + y² + z²) / (x² + y² + z²)^(p/2 + 1)
div f = (3 - p)/(x² + y² + z²)^(p/2)
Now it comes like, div F = (3 - p)/r^p.
Therefore, div f = (3 - p)/r^p
To know more about vectors, click below:
https://brainly.com/question/25705666
#SPJ4
how many of which type of orbitals are used to create the hybrid orbitals on carbon in a molecule of ethylene
Hybridization in ethylene molecule (C2H4) occurs due to the overlapping of the two 2s atomic orbitals as well as one 2p atomic orbital of the two carbon atoms.
This overlapping produces four identical sp hybrid orbitals, each containing one electron from each carbon atom. Hybridization allows the bonding between the two carbon atoms, forming the carbon-carbon double bond. The sp2 hybridization of the carbon atoms results in the formation of a linear shape of the ethylene molecule.
The two unhybridized p atomic orbitals of the two carbon atoms lie perpendicular to each other. This results in the formation of a π bond between the two carbon atoms, as the electrons in the two unhybridized p orbitals can move freely between the two carbon atoms.
The linear shape of the ethylene molecule is due to the fact that the two sp2 hybrid orbitals of the two carbon atoms are oriented in opposite directions and are parallel to each other. The two hydrogen atoms are bonded to the carbon atoms through single covalent bonds, forming the carbon-hydrogen single bonds.
To know more about sp hybridization, click below:
https://brainly.com/question/13598024
#SPJ4
11. what two products may be produced during fermentation of simple carbohydrates? how is each identified in the fermentation test? can you have one without the other?
The anaerobic breakdown of carbohydrates produces alcohol and carbon dioxide.
Carbohydrate is a biomolecule consisting of carbon, hydrogen and oxygen atoms, usually with a hydrogen–oxygen atom ratio of 2:1 and thus with the empirical formula Cₘₙ.
Microorganisms employ the fermentation of carbohydrates to produce energy. During glycolysis, the majority of bacteria convert glucose to pyruvate; however, certain species utilize alternative routes. A single carbohydrate-containing basal medium makes up a fermentation medium.
Durham tubes are placed upside-down in the test tubes to monitor gas production, and phenol red is employed as a PH indicator. In order to produce acid: 1. Positive: The medium will turn yellow after incubation. 2-Unfavorable: The incubation medium will continue to be red. When producing gas: Positive: A bubble can be seen in the Durham tube. 2. Negative: Durham tube has no bubble. Yes, various bacterial groups or species have diverse patterns for fermenting carbohydrates.
To know more about carbohydrates fermentation visit the link:
https://brainly.com/question/9503269?referrer=searchResults
#SPJ4
solubility curves are used to determine if a solution is unsaturated, saturated, or supersaturated at a specific pressure. true or false
Yes, this statement is true that solubility curves are used to determine if a solution is unsaturated, saturated, or supersaturated at a specific pressure.
What do you mean by solubility curves?
The solubility of a solid in a given solvent is defined as the number of grams of the solute required to saturate 100g of the solvent at a particular temperature. The solubility of a given substance at a given temperature can be determined from its solubility curve. Solubility curve can be used to determine the amount of substance deposited when the solution is cooled. Solubilities of different substances at a particular temperature can be determined.
When any solid is in contact with its solution for sufficient time, then the solid will dissolve if the solution is not saturated or solid will grow at the expense of the solution if the solution is supersaturated. In any case, the solubility curve represents equilibrium conditions.
To know more about solubility curves from the given link:
https://brainly.com/question/19997465
#SPJ4
which alkyl halide would form the most stable carbocation: isopropyl bromide, tert-butyl bromide, methyl bromide or ethyl bromid
The most stable carbocation would be formed by t-butyl bromide alkyl halide. Carbocation stability is typically correlated with the number of methyl groups connected to the core carbon.
What in chemistry is a halide?Chemical substances called halides include halogens. There are halides in nature, and some of them, like salts and acids, are necessary for maintaining human existence. Halides are present in minerals, living things, and plants. Table salt, or NaCl, is the most popular halide.
What does halide group mean?The sodium, salt, and hydrochloric acid salts make up the group of minerals known as halides. This category of minerals includes the crystals halite, sylvite, and carnallite, which only include chloride with petrogenic significance. Rock salt, also known as halite (NaCl), is the crystalline form of sodium chloride.
To know more about halide visit:
https://brainly.com/question/28384269
#SPJ4
would decreasing the volume of the container for each of the following reactions cause the equilibrium to shift in the direction of the products, the reactants, or not change?
This leads to the decreasing the volume will shift equilibrium in the direction of products.
Chemical equilibrium is the condition in which the reactants and products are both present in concentrations that have no further tendency to change over time, preventing any discernible change in the system's properties. In a state of neutral equilibrium, when an external force is applied, the line connecting the earth's centre and the centre of gravity falls within the base of the body.
A product is anything that can be provided to a market in order to satiate a customer's need or desire. It can be an item, a system, or a service that is made accessible for consumer usage in response to consumer demand. An insurance policy is an example of an intangible product because it can only be understood through indirect perception.
learn more about equilibrium here
https://brainly.com/question/8983535
#SPJ4
strontium chloride and sodium fluoride react to form strontium fluoride and sodium chloride, according to the reaction shown. srcl2(aq) 2naf(aq)⟶srf2(s) 2nacl(aq) what volume of a 0.450 m naf solution is required to react completely with 935 ml of a 0.320 m srcl2 solution? volume: ml how many moles of srf2 are formed from this reaction?
0.6122L volume of a 0.450 m naf solution is required to react completely with 935 ml of a 0.320 m strontium chloride solution , 0.15 ml moles of strontium fluoride are formed from this reaction
A strontium and chlorine salt is known as strontium chloride. It is a "typical" salt and creates watery neutral solutions. This salt creates a bright red flame, just like all strontium compounds do, and is frequently used in pyrotechnics because of this.
PART A
Number of moles of SrCl, Molarity Volume (L)
=0.420x0.357 L
=0.15 mol
According to the reaction, 2 mol of NaF reacts with 1 mol of SrCI,
Therefore, number of moles of NaF needed to react with 0.15 mol of StCl, is calculated as follows:
Number of moles of NaF needded = 0.15 molx2 mol NaF1 mol
=0.30 mol NaF
Volume of NaF needed
=no. of moles/molarity
=0.30 mol/0.490 mol/L
=0.6122 L
PART B
For 1 mol of SrCl,, 2 mol of NaF is required to form 1 mol of STF, Therefore, moles of SrF, formed by 0.30 mol of NaF is calculated as follows:Moles of SrF, formed = 1/2x0.30
=0.15 mol
Learn more about strontium chloride here;
https://brainly.com/question/13875076
#SPJ4
n a molecule having three pairs of electrons around a central atom and a trigonal planar shape, how many lone pairs of electrons does the central atom have?
Zero, A trigonal planar molecule requires that there are no lone pairs breaking the molecule's parity. This insure that all three atoms exist on the same plane.
What is a molecule?
A group of two or more atoms held together by tempting forces known as chemical bonds; depending on context, the term may or may not add ions which propitiate this criterion is called molecule.
What is an atom?
The smallest unit of ordinary substance forms a chemical element. Every solid, liquid, gas, and plasma is composed of neutral or ionized atoms called an atom. Atoms are much small, typically around 100 picometers across.
To know more about Atom, visit:-
https://brainly.com/question/1078183
#SPJ4
which of the following options correctly describe bond strength, bond dissociation energy, and their periodic trends? select all that apply.
As atom size grows, the bond dissociation energy of the halogen family decreases down the group.
The bond strength increases with bond length. A shorter bond results from a greater bond order for a given pair of atoms. The energy needed to dissolve a bond is known as the bond dissociation energy (BDE). The BDE is always positive since the production of a bond releases energy (H 0), but the breaking of a bond involves the intake of energy (H > 0). The weak attractive interactions that exist between the individual molecules of a molecular covalent material are known as intermolecular forces. The bond dissociation energy, or the amount of energy needed to dissolve a given covalent bond, is a measure of the bond's strength. molecules in a mole. Multiple bonds between the same atoms are more powerful than a single bond. I will have the weakest bond strength and F will have the strongest bond when it comes to electronegativity.
To learn more about dissociation please click on below link
https://brainly.com/question/20430933
#SPJ4
how many grams of water will be produced when 1.1 moles of ethanol (ch3ch2oh) are burned completely? enter a number only (no units) and express your answer using three significant figures.
The 156 grams of water that were created when 2.9 moles if ethanol were burned.
What is the purpose of the ethanol?Drugs, plastics, varnishes, polishes, plasticizers, etc. cosmetics are all made with ethanol. Ethanol is utilized in medicine as an antidote for glycol or methanol overdose as well as a topical antiinfective.
To what extent is ethanol toxic?Intoxication with ethanol is frequent in older adolescents and adults. A child's toxic dosage is 3 mg/dL, but an adult's hazardous dose is 5 mg/dL. Children are more likely than adults to get hypoglycemia after a single intake.
BriefingC₂H₅OH + 3O₂ ⇒2CO₂ + 3 H₂O
Given
Took ethanol moles = 2.9
Since 1 mole of ethanol produces 1 mole of water = 54gram
2.9 mole of ethanol produces = 2.9 x 54 g
= 156 gram of water.
To know more about Ethanol visit:
https://brainly.com/question/19653906
#SPJ4
Equilibrium calculations: Using the equation below for calculating the equilibrium constant for the reaction of PCl3 + Cl2 to produce PCs, make the following substitutions for the reactants and products, and recalculate the equilibrium constant, then comment on the equilibrium constant does it favor products, or reactants? [PCI) = 5.0 mol/L [Cl2] = 5.0 mol/L [PC1s] = 0.1 mol/L [PCI ] 0.050 mol/L K= 9.6 x 10-4 [PC13 ][CI] (7.2 mol/L) (7.2 mol/L) For the steam reformation reaction CH + H2O + CO + 3 H2, calculate the equilibrium constant using the formula and concentrations below, and comment on the equilibrium constant: does it favor products, or reactants? What do you think is the industrial use of this chemical reaction?
The equilibrium constant is 12.5
The equilibrium constant of a chemical response is the price of its response quotient at chemical equilibrium, a kingdom approached by means of a dynamic chemical device after enough time has elapsed at which its composition has no measurable tendency towards in addition trade.The equilibrium consistent of a chemical response is the price of its response quotient at chemical equilibrium, a kingdom approached by a dynamic chemical device after enough time has elapsed at which its composition has no measurable tendency in the direction of further trade.
Calculations:-
CH₄ + H₂O ---------> CO + 2H₂
[CO] = 10⁻² mol/L
= 0.01 mol/l
[H₂] = 5 × 10⁻¹ mol/l = 0.5 mol/l
[H₂O] = 10⁻² mol/l = 0.01 mol/l
[CH₄] = 10⁻² mol/l = 0.01 mol/l
K = [CO][H₂]³/[CH₄][H₂O]
= (0.01) × (0.5)³/(0.01)×(0.01)
Kc = 12.5
Equillibirium constant = 12.5
To lean more about equilibrium constant :
brainly.com/question/3159758
#SPJ4
what is the change in length of a 3.00cm-long column of mercury if its temperature changes from 37 degrees to 40 degrees celius
The Mercury column will change in length by its linear coefficient of expansion multiplied by its initial length multiplied by the temperature change.
P = 75 cm Hg. Consequently, atmospheric pressure is given by
P= lcos=lcos60=l/2 , l=2P=275 cm, and l=150 cm.
With everything in place, we can now determine the cutting length of the diamond stirrup in our case. The calculation is as follows: bend deduction = (4 arm length) + (2 hook length). The expansion of mercury occurs when it is heated in a column that is not restricted in length. Mercury's linear thermal expansion is affected by the liquid column's beginning height, mercury's changing temperature, and mercury's thermal expansion coefficient. Consequently, the liquid's expansion or contraction as a result of the change
To learn more about Consequently please click on below link
https://brainly.com/question/3794486
#SPJ4
b) what is the chemical shift, in parts per million (ppm), if the sample is analyzed with a 400.0 ‑mhz instrument?
The chemical shift, in parts per million (ppm), if the sample is analyzed with a 400.0 ‑MHz instrument is
if ¹H signal observed = 194.0 Hz
frequency = 115 MHz
the chemical shift = shift ( Hz ) / spectrometer frequency
the chemical shift = 194 Hz / 115 MHz
= 1.68 ppm
for the same proton the chemical shift does not change . Thus, chemical shift in part per million of the sample analyzed with 400 MHz, the chemical shift will be same for 400 MHz that is 1.68 ppm.
this question is incomplete , the complete question is :
A ¹H NMR signal is observed at 194.0 Hz ( downfield of TMS) on a 115 MHz instrument.
a) what is the observed chemical shift in part per million?
b) what is the chemical shift, in parts per million (ppm), if the sample is analyzed with a 400.0 ‑MHz instrument?
To learn more about chemical shift here
https://brainly.com/question/12977581
#SPJ4
Energy stored in an object when it is located above the Earth's surface is known as __________ energy.
a
thermal
b
gravitational
c
mechanical
d
elastic
Answer:
it would be answer (B)
Explanation:
Under which set of conditions will the ideal gas law give the best approximation for the properties of a real gas?
Select the correct answer below:
low pressure and low temperature
low pressure and high temperature
high pressure and low temperature
high pressure and high temperature
For a real gas to approach the properties of an ideal gas, the pressure should be low, the attraction between the molecules should be high, and temperature should be high.
Ideal gas conditions are:
An ideal gas is a gas that has no intermolecular attraction.An ideal gas is a gas with negligible volume.The ideal gas equation isPV =nRT
The real gas conditions are:
A real gas is a gas that has an intermolecular attraction.A real gas is a gas that has volume. The real gas equation is(P +αn²) (V - nb) = nRT
V²
Thus, real gases behave ideally at high temperatures and low pressures.
To know more about gases visit:
brainly.com/question/12554034
#SPJ4
balance the following redox reaction if it occurs in basic solution. what are the coefficients in front of cr and cl2 in the balanced reaction? cr(s) + cl2(g)→ cr3+(aq) + cl-(aq)
The coefficients in front of the reactions are cr =2 and cl2 i= 3.
In chemistry, a solution is a special type of homogeneous mixture composed of two or greater materials. In this sort of mixture, a solute is a substance dissolved in another substance, called a solvent.
The solution is a homogeneous aggregate of 1 or extra solutes dissolved in a solvent. solvent: the substance in which a solute dissolves to supply a homogeneous aggregate. solute: the substance that dissolves in a solvent to produce a homogeneous combination.
The constituent debris of a solution is smaller than 10-9 meters in diameter. Constituent particles of a solution can not be visible to the eye. Solutions no longer scatter a beam of mild passing through it.
Learn more about the solution here:-https://brainly.com/question/17145398
#SPJ4
How to write balanced equation when you are only given the reactants. For example, Write the balanced equation for the reaction that occurs when chlorine gas is bubbled through a solution of sodium iodide. (I already know how to balance equations, I just need to know how to find the reactants)
To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. Therefore, the balanced equation is Cl[tex]_2[/tex]+ NaI [tex]\rightarrow[/tex] NaCl + I[tex]_2[/tex].
What is Balanced equation?Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.
The other characteristic of balanced reaction is that physical state should be written with each compound or molecule on reactant and product side. Physical state should be written in brackets. s means solid, l means liquid, g means gas.
The balanced reaction when chlorine gas is bubbled through a solution of sodium iodide is given as
Cl[tex]_2[/tex]+ NaI [tex]\rightarrow[/tex] NaCl + I[tex]_2[/tex]
Therefore, the balanced equation is Cl[tex]_2[/tex]+ NaI [tex]\rightarrow[/tex] NaCl + I[tex]_2[/tex].
Learn more about the balanced equation, here:
https://brainly.com/question/7181548
#SPJ1
What is the concentration of a ki solution if 20. 68 g of solute was dissolved in enough water to form 100. Ml of solution?.
The quantity is divided by volume it really is dissolved in to get the concentration. quantity concentration amount. = For instance, you may dissolve. sodium chloride, 0.9g.
What is the straightforward meaning of volume?The volume of an item in three dimensions is the area occupied inside its boundaries. It is referred to as the object's capability on occasion..
BriefingNumber of moles per solute (KI) per volume of water (KI + water) is how molarity is defined.
Additionally, we require the molar mass for KI, which is 166 g/mol.
Procedure:The number of moles of KI = 2.08 g/166 g/mol = 0.0125 moles KI
Volume = 279 mL = 0.279 L (1 L = 1000 mL)
Therefore,0.125 moles KI ------- 0.279 L of solution
X ------- 1 L of solution
X = 0.448 mol/L
Another procedure:Molarity = number of moles (KI)/Volume of solution (L)
Molarity = 0.125 moles/0.279 L = 0.448 mol/L or M
Answer: M = 0.448 mol/L
To know more about Volume visit:
https://brainly.com/question/859314
#SPJ4