In consideration of Henry's law the molar mass of organic compound is 0.24 grams.
What is molar mass?The molar mass of a chemical compound defined as the mass of a sample of that compound devided by the amount of substance which is the number of moles in that sample,measured in moles.
Sol-One of three asks what the mass of water is in grams and two and 1/2 liters of paper of Equis, 12.5% sodium chloride, fifty five°C. This problem tells us that pure H2O is one hundred eighteen tour at fifty five*° C.So the first thing that we have to do here is figure out wth e um, the mole fraction of thermal fractions, I suppose, of both sodium chloride and water.
We know those 2.5 liters. We're looking for this number of moles here. Ideal gas constant 0.8 to 6 leader atmospheres over mole Calvin. And then we have to convert, um, Celsius, the 55 degrees C to Calvin. So we always rmember that simply 55 degrees Celsius plus two year and 73 which gets US 328 Calvin. So solving all of that for the number of moles, then that gives us 0.133 off water and 2.5 liters of vapor. So last step, then, is to just convert that to Graham's, since the problem asks for a mass and not by the number moles. So you can plug that, , basically into, uh, the molecular by it it and it does weight of water, just 18.2 grand's for mold. And that gives us keeping significant figures in mind. 0.24 grams.
To know more about molar mass click-
https://brainly.com/question/837939
#SPJ1
the beta decay of cesium-137 has a half-life of 30.0 years. how many years must pass to reduce a 26 mg sample of cesium 137 to 5.7 mg?
Answer:
10 pts you say?
Explanation:
subatomic particles are removed from glucose and end up creating water at the end of the electron transport chain?
The subatomic particles are removed from glucose and end up creating water at the end of the electron transport chain are two protons.
What is electron transport chain?
Electrons are transferred from one molecule to another in the electron transport chain and the energy released during these electron transfers is utilized to create an electrochemical gradient.
During the oxidative phosphorylation process, glucose molecules are stripped of their protons when two oxygen molecules are reduced to water using the electrons that have traveled through the electron transport chain. Once at the mitochondrial membrane, the protons are utilized to establish a proton gradient. By means of chemiosmosis, this gradient is utilized to propel the manufacturing of ATP.
Therefore the subatomic particles are removed from glucose and end up creating water at the end of the electron transport chain are two protons.
To know more about the Electron transport chain, click below:
brainly.com/question/876880
#SPJ4
Nuclear decay occurs according to first-order kinetics. A nuclide decays in 3. 40 days from 45. 0 g to 12. 1 g. What is the rate constant for the nuclide?.
The equilibrium law for the nuclide is 0.388 days per one, according to the announcement.
By nuclide, what do you mean?
The amount of protons, protons, and the activity state of nucleus determine the species of atom known as a nuclide, also known as a nuclear species. Thus, a nuclide is identified by its number of protons and mass number (A) (Z).
Does a nuclide resemble an atom?A nuclide is similar to but distinct from an atom or a nucleus. It has several nucleons, which define it. Nuclide, to put it simply, is a type of atom or nucleus. We characterize it using the elements that make up its nucleus, as well as the quantity of protons, neutron, and energy.
To know more about Nuclide visit:
brainly.com/question/9826865
#SPJ4
Commercial methods for making fatty acid methyl esters (FAMEs): • Base-catalyzed transesterification of the oil with ________________.
Commercial methods for making fatty acid methyl esters (FAMEs). Base-catalyzed transesterification of the oil with Sodium Methoxide.
What is FAME used for?The generic chemical term for biodiesel derived from renewable sources is Fatty Acid Methyl Ester. It is used to supplement or replace mineral diesel and gas oil, which are used to power on- and off-road vehicles as well as static engines.It is formed during the biodiesel production process when vegetable oils and animal fats are transesterified. In the presence of a catalyst, usually potassium hydroxide, these high molecular weight oils and fats react with short chain alcohol to produce lower molecular weight esters (FAME).Transesterification is the process of separating the three alkoxy groups from the triglyceride's glyceryl backbone. As a byproduct of the reaction with the alcohol, three lower molecular weight esters are formed. The catalyst in the reaction is potassium hydroxide.To learn more about Fatty Acid refer :
https://brainly.com/question/17352723
#SPJ4
with what compound will nh3 experience only ion-dipole intermolecular forces? group of answer choices ocl2 licl ch3i c3h7oh sih4
Here, we must select a chemical capable of producing an ion-dipole interaction with ammonia. Only b) NaOH will interact with the ion dipole of the NH3.
How does a dipole of ions operate?
When an ion interacts with a nonpolar molecule, a weak attraction called an ion-induced dipole force is created. In addition, a fully charged ion can polarize a nonpolar molecule by approaching it; as a result, the electrons in the molecule react and produce a dipole.
What makes it an ion-dipole?
Dipole-Ion Interaction
An electrically charged atom or molecule is known as an ion (which is to say the opposite of a neutral molecule). The term "dipole" simply refers to the presence of two poles that are negatively and positively charged. Another name for a molecule having a dipole is a
To know more about ion-dipole visit:
https://brainly.com/question/14747495
#SPJ4
provide a reason to explain why the less stable radical intermediate leads to the formation of the major product in this reaction.
Hybridization, electronegativity, and polarizability are three variables that affect the stability of free radicals. The unpaired electron in these radicals, which tends to donate or acquire another electron to achieve stability, is the cause of their high reactivity.
Because the bromine radical is less reactive, it is more selective for the 2° radical. Cl is less picky and less selective due to its lower stability and increased reactivity.
Learn more about Hybridization,
https://brainly.com/question/22765530
#SPJ4,
what is the Ka reaction of hcn? Ka reaction: the Ka of hcn is 6.2×10−10. what is the Kb value for cn− at 25 °c? Kb
The Ka of the reaction of HCN is 1.6x10^-5 when the Ka of hcn is 6.2×10−10 and value of Kb is 1.6x10^-5
Ka reaction of HCN is
HCN (aq) + H2O (l) H3O+ (aq) + CN- (aq)
Now, at 250 C
Ka × Kb = Kw = 10-14
Hence Kb of CN- ion is
Or, Kb = = 1.6 × 10-5 .
Kb is the measure of the basic strength.It determines the relative basic strength.Kb is the base dissociation constantKb is the base dissociation constant. How thoroughly a base separates into its constituent ions in water is determined by the base dissociation constant.pKb is the negative base-10 logarithm of the base dissociation constant (Kb) of a solution. It is used to determine the strength of a base or alkaline solution.To learn more about base dissociation constant visit:
brainly.com/question/28197409
#SPJ4
What is the answer of number 11?
Hope this helps!
What is the proper rate of cpr compressions for the adult cardiac arrest victim?.
The recommended pace for CPR compressions for an adult cardiac arrest sufferer is 100 to 120 per minute.
What are compressions?Compressions entail applying particular pressure towards the person's chest with your hands while pressing down quickly and firmly. Compressions constitute the most crucial CPR procedure. When administering CPR compressions, follow these steps: Place the person on a stable surface while holding her back up.
What do compressions do in CPR?CPR simulates your heart's pumping action by doing chest compressions. These compressions support your body's natural blood circulation. Heart disease and cardiac arrest are not the same thing. A heart condition occurs when the flow to the coronary artery is blocked.
To know more about compressions visit:
brainly.com/question/17309714
#SPJ4
if you completely react 6 moles of h2 gas (with n2 as excess), how many moles of nh3 can be produced?
The number of moles of NH3 can be produced are 4 moles.
What is a mole?
The mole is the amount of substance in a system that includes the same number of elementary entities as there are atoms in 0.012 kilogram of carbon 12; it is denoted by the sign "mol."
What is a limiting factor?
Limiting factors are reactants or reagents that are used by a chemical reaction before other reactants. The limiting factor is the reactant or reagent with the lowest supply in terms of its required ratio in comparison to other reactants in the system.
According to the question;
Balanced equation would be :
[tex]3H_2 + N_2[/tex] ⇒ [tex]2NH_3[/tex]
Here, [tex]H_2[/tex] is a limiting factor
No. of moles of ammonia formed when 3 moles of [tex]H_2[/tex] react with excess of [tex]N_2[/tex] =2
applying unitary method:
No. of moles of ammonia formed when 6 moles of [tex]H_2[/tex] react with excess of [tex]N_2[/tex]= [tex]\frac{2}{3 } * 6[/tex] = 4moles.
The number of moles of NH3 can be produced are 4 moles.
To know more about limiting factor, check out:
https://brainly.com/question/14222359
#SPJ4
A solution of potassium hydroxide (koh) is titrated against a solution of hydrochloric acid. How many moles of potassium hydroxide would react with 1 mole of hydrochloric acid?.
1 mole of potassium hydroxide would react with 1 mole of hydrochloric acid.
The balanced equation for the reaction is as follows:
[tex]KOH + HCl[/tex]→ [tex]KCl + H_{2} O[/tex]
Titration is defined as "the process of determining the quantity of a substance A by adding measured increments of substance B, the titrant, with which it reacts until exact chemical equivalence (the equivalence point) is achieved."
Titration is a common quantitative chemical analysis laboratory method for determining the concentration of an identified analyte. The titrant or titrator is a reagent that is prepared as a standard solution of known concentration and volume.
The titration's goal is to find the equivalence point, or the point at which chemically equivalent amounts of the reactants have been mixed. The amount of reactants mixed at the equivalence point is determined by the stoichiometry of the reaction.
To learn more about titration, here
https://brainly.com/question/18917441
#SPJ4
K-42 has a half-life of 12.0 hours. At present, a given ore sample contains 34.2 mg of K-42. How much did it contain yesterday at the same time?
The amount of sample of K-42 yesterday at the same time is equal to 136.8 mg.
What is the half-life of radioactive material?The half-life of the radioactive material can be described as the time required to decrease its original amount to half after decay. The half-life of a radioactive element does not depend on the initial amount of the substance.
Consider that N₀ is the initial amount of the K-42 sample
Consider that 'n' is the number of half-lives of K-42.
The time for which K-42 decay, t = 24 hrs
Half-life of substance (t½) = 12 hrs
t = n ×t½
24 = n × 12
n = 2
Assume that N₀ is the amount of the K-42 before decay for 24 hours.
N ×2² = N₀
34.2 × 4 = N₀
N₀ = 136.8 mg
Learn more about half-life period, here:
brainly.com/question/14521252
#SPJ1
what is the molarity of a solution made by dissolving 45.6 g glucose, c6h12o6, in enough water to make 350.0 ml of solution?
The molarity of a solution made by dissolving 45.6 g glucose, C₆H₁₂O₆, in enough water to make 350.0 ml of solution is 0.722 M.
given that :
volume = 350 mL = 0.350 L
mass of glucose = 45.6 g
molar mass of glucose = 180.15 g/mol
the number of moles of glucose = mass / molar mass
= 45.6 / 180.15
= 0.253 mol
the molarity expression is given as follows :
Molarity = moles / volumes in L
= 0.253 / 0.350
= 0.722 M
Thus, the molarity of the solution to make 350.0 mL of solution is 0.722 M.
To learn more molarity here
https://brainly.com/question/8732513
#SPJ4
Student a says the δ h value of an exothermic energy change is always positive. Student b says δ h value of an exothermic energy change is always negative. Who is correct?.
Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, student a and student b are correct.
What is Enthalpy?Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances.
Mathematically,
q = n ×ΔH
where
q = amount of heat
n = no of moles
ΔH = enthalpy
n = w / M.M
Both students are correct as energy can be positive as well as negative. Any reaction in which energy is added, energy value comes out to be positive and reaction is called endothermic reaction. Any reaction in which energy is released, energy value comes out to be negative and reaction is called exothermic reaction.
Therefore, student a and student b are correct.
To know more about enthalpy, here:
https://brainly.com/question/24170335
#SPJ1
are the physical and chemical properties of a compound necessarily similar to those of the elements of which it is composed?
Compounds have physical and chemical properties that are different from the properties elements of which it is composed.
A substance's physical property is a quality that can be seen or quantified without affecting the substance's identity. Color, density, hardness, and melting and boiling points are examples of physical qualities.
The capacity of a substance to go through a particular chemical transition is described by its chemical property. Rust is a different kind of matter than the iron, oxygen, and water present before the rust formed, hence its production is a chemical change. Chemical attributes include, for instance, flammability, toxicity, acidity, numerous types of reactivity, and heat of combustion.
For more questions like Properties of compounds click the link below:
https://brainly.com/question/81085
#SPJ4
Make a claim about whether air is matter. Support the claim with evidence and explain your reasoning
Answer: Yes
Explanation:
Air is matter because it takes up space, has weight and is composed of particles.
Partial bonding, for example, as part of a resonance hybrid, often results in structures with _____.
Partial bonding, for example, as part of a resonance hybrid, often results in structures with fractional bond orders.
What is resonance hybrid?
A resonance hybrid is a substance that exhibits resonance and has a structure that is stated as the average of two or more structural formulas, each of which is separated from the next by a double-headed arrow. For instance, benzene.
It is possible to explain the equal bond lengths using the resonance hybrid of this polyatomic ion, which was created from its various resonance structures.
Therefore, Partial bonding, for example, as part of a resonance hybrid, often results in structures with fractional bond orders.
To learn more about resonance hybrid
Here: https://brainly.com/question/17211567
#SPJ4
Derive an expression for the total mechanical energy e of the moon in terms of m, m, d and the gravitational constant g.
Fm1m2 = Gm1m2/r2 * r. A planet with a mass of M and a radius of b is orbited by a moon with a mass of m and a radius of an at a distance of d (center to center).
A mass is what?The quantity of material in a material or an object is measured by its mass. The kilogram (kg) is the fundamental SI unit of mass, while lower masses can also be expressed in grams (g). A balance is what you would use to measure mass.
How is mass determined?The kilogram (kg) is the fundamental SI unit of mass, while lower masses can also be expressed in grams (g). A balance is what you would use to measure mass. A triple beams balance can be used to quantify mass in the laboratory.
To know more about mass visit:
https://brainly.com/question/11622869
#SPJ4
What postulate of the kinetic molecular theory best explains why gases have high fluidity? because collisions between gas particles are elastic, there is no loss of energy as particles flow past each other. Because gases consist of large numbers of tiny particles, they spread out and do not come in contact with each other. Because the attractive forces between gas particles are negligible, gas particles can glide easily past one another. Because the average kinetic energy of gas particles increases as temperature increases, gas particles behave more like a liquid.
the elasticity of gas particle collisions, there is no energy loss when the particles pass one another. Gases are composed of a very large number of small particles, which spread out and avoid contact with one another.
Which of the following gas postulates from the kinetic molecular theory best explains why pressure exists in gases?As the quantity of gas particles in the container rises, so does the frequency of wall interactions and subsequently the pressure of the gas. The average kinetic energy of a gas particle is exclusively dependent on the temperature of the gas, says the theory's final postulate. As the volume of gas particles inside the container grows, more of them will collide with the walls, increasing the pressure and the frequency of collisions.
Learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ4
Answer:
Because collisions between gas particles are elastic, there is no loss of energy as particles flow past each other.
Calculate the work associated with the compression sof a gas from 121. 0 l to 80. 0 l at a constant pressure of 16. 7 atm.
The amount of energy required to compress a gas from 121 litres to 80 litres at a constant pressure of 16.7 atm is 6.94*10^4J. When the need for water increases in a system with constant pressure
As the demand for water falls, the pump speed will also decline. The pump only runs as much as required to fulfil demand in order to maintain pressure as efficiently as feasible. Using the following expression, we can determine the work (W) connected to gas compression at constant pressure:
W = -P.V, where P is the outside pressure.
V represents the volume change.
In light of the fact that 1 atm.L = 101.325 J, the work of compression is given by W = -P*(v2 - v1) = -16.7atm*(80.0 - 121.0)*(101.325/1) = 6.94*10^4J.
Learn more about constant pressure here
https://brainly.com/question/12152879
#SPJ4
the concentration of sodium chloride in blood serum is approximately 0.14 m. what volume (in liters) of blood serum contains 2.0 g of nacl?
The molarity of the solution and the number of moles of the solute can be used to calculate the volume of a solution. Blood serum at a concentration of 0.14 M and 2g of NaCl is 0.24 L in volume.
The term "molarity" of a material refers to its concentration. It is the proportion of the solute's moles to the liters of solution. Temperature affects a substance's molarity.
The number of moles of solute and the volume of the solution both affects the molarity of the solution. The blood serum has a molarity of 0.14 and 20g of sodium chloride.
NaCl has a molar mass of 58.5 g/mol. The following formula is used to determine how many moles of NaCl are present in the 2 g sample:
2 g = 58.5 moles in terms of moles.
= 0.034 moles.
Now, the blood serum volume is determined using the formula below:
Volume is equal to moles times molarity.
= 0.14 mol/L and 0.034 moles
= 0.24 liter.
As a result, 0.24 L of 0.14 M blood serum contains 2 g of NaCl.
Visit the following link to learn more about molarity:
brainly.com/question/2817451
#SPJ4
An element from group 13 bonds with an element from group 17. Which formula correctly depicts the correct chemical formula for elements from these two groups?.
A chemical compound is created when metals and nonmetals mix in a specific ratio. AlCl3 is the compound that will be created from elements in groups 13 and 17.
A chemical compound is made up of several related molecules (or molecular entities), each of which has atoms from various chemical elements and is joined by chemical bonds. A molecule is not a compound because it is made up of only one element's atoms. A chemical reaction can convert one element into another and may involve interactions with other molecules. In the course of this process, atom-to-atom bonds may form or break.
Using the common chemical symbols with numerical subscripts, a chemical formula defines the number of atoms of each element in a compound molecule. The Chemical Abstracts Service has given a lot of chemical compounds a special CAS number that serves as an identification. More than 350,000 chemical compounds (including chemical combinations) have been registered for manufacturing and use globally.
Learn more about chemical compound here:
https://brainly.com/question/12166462
#SPJ4
What is the concentration in % (m/v) of a nacl solution prepared by dissolving 9. 3 g of nacl in sufficient water to give 350 ml of solution?.
350 ml of NaCl solution made by combining 9. 3 g of NaCl with enough water to dissolve it has a 0.458M molarity.
The solution is represented by molarity. M stands for "molarity," which is the amount of solute in moles per liter of solution.
The formula for calculating molarity is
M = moles of solute/liter of solution.
The mass of NaCl is 9.3 g, the volume of the solution is 350 mL, and the volume of the solution in liters is given by 350/1000, or 0.35 L.
M = moles of NaCl/liter of solution is the formula used to calculate M.... (1)
Therefore, we must first determine the moles of NaCl.
Molar mass (NaCl)/mass of NaCl = moles of NaCl...... (2)
NaCl's molar mass is 58 g/mol.
Add values to Eq (2)NaCl moles are 9.3 g/58 g/mol.NaCl moles equal 0.16 mol. Place the numbers in Eq. (1) as follows:
M = 0.16 mol/0.35 L
M = 0.458
The Molarity then equals 0.458M.
The molarity is 0.458M as a result.
To know more about concentration, click below:
https://brainly.com/question/17206790
#SPJ4
how many atoms are there in one molecule of h3po4 ? how many atoms of each element are there in one molecule of h3po4 ? how many atoms are there in one molecule of ? how many atoms of each element are there in one molecule of ?
There are 8 atoms in total in one molecule of H3PO4.
There are 3 atoms of hydrogen, 1 atom of phosphorous and 4 atoms of oxygen in the one molecule of this compound, which is called hydrogen phosphate.
The charge number of an atomic nucleus is known as the atomic number or nuclear charge number (sign Z) of a chemical element. This is equivalent to the proton number (np), or the number of protons present in the nucleus of every atom of that element, for conventional nuclei. Ordinary chemical elements can be uniquely identified by their atomic number. The atomic number and the number of electrons are both equal in a typical, uncharged atom.
The total number of atoms in one molecule can be calculated as :
= 3 (H) + 1 (P) + 4(O)
=8 atoms in total
Therefore, there are 8 atoms in total in one molecule of H3PO4.
Learn more about atomic number here :
brainly.com/question/8834373
#SPJ4
the model illustrates a process by which a substance is taken up by a cell. which statements describe the process? select the correct answer. (1 point)
The model shows the process of endocytosis.
What is endocytosis?
A biological process called endocytosis allows chemicals to enter the cell. An region of cell membrane that surrounds the substance to be swallowed then buds off inside the cell to create a vesicle containing the substance to be ingested. Pinocytosis (cell sipping) and phagocytosis are two types of endocytosis (cell eating). It is an active mode of transportation.Receptor-mediated endocytosis, sometimes referred to as clathrin-mediated endocytosis, caveolae, pinocytosis, and phagocytosis are the four subcategories of endocytosis mechanisms.Small molecules are transported through the phospholipid bilayer by the carrier and channel proteins explained in the section above. By use of a unique procedure known as endocytosis, eukaryotic cells may also take in macromolecules and particles from the surrounding media.Christian deDuve first used the word "endocytosis" in 1963.To know moremore about endocytosis, click the link given below:
https://brainly.com/question/14537096
#SPJ4
In aerobic respiration, during electron transport in the chain nadh is oxidized at _____, while fadh2 is oxidized at _____.
In aerobic respiration, nadh is oxidized at complex I during electron transport in the chain, while fadh2 is oxidized at complex II.
What is electron?GitHub created and maintains the open-source, free software framework known as Electron. The framework is made to enable the development of desktop web apps with a backend running on the Node.js runtime environment and being rendered using a variant of the Chromium browser engine. Unbound or bound to an atom, an electron seems to be a negative charge subatomic particle (not bound). The proton, neutron, and the electron that is attached to an atom are the three main types of particles.
What is electron used for and its example?JavaScript, HTML, and CSS can be used to create desktop applications using the Electron framework. With Electron, you can build cross-platform programs that run on Windows, macOS, and Linux with no prior knowledge of native development by incorporating Chromium and Node.js into its binary.
The electron, the smallest elemental part of an atom, has a negative charge. Protons and electrons both occur in equal numbers in neutral atoms. One electron and one proton are all that the hydrogen atom has. On the other hand, the uranium atom has 92 protons, which means 92 electrons.
To know more about Electron visit:
https://brainly.com/question/1255220
#SPJ4
In the Introductory Activity, the developing solvents were 2% sodium chloride aqueous solution and 2% isopropyl alcohol aqueous solution. Draw separate molecular diagrams of how sodium chloride and isopropyl alcohol would interact in water. Identify the types of intermolecular attrac- tions within each diagram.
the developing solvents were 2% sodium chloride aqueous solution and 2% isopropyl alcohol aqueous solution
What occurs if you combine salt and rubbing alcohol?Isopropyl alcohol can be "salted out," which uses salt to remove water from the substance and thereby boosts its potency. When salt is added to water, it dissolves, but is insoluble in isopropyl alcohol, which causes the water to become heavier and sink to the bottom while the alcohol floats to the top.
Salt and alcohol can they be dissolved?Salt and alcohol do not interact, despite the fact that water and alcohol do. The solution becomes salty when salt is added, but the salt dissolves in the water but not the alcohol.
Learn more about Isopropyl alcohol here:
https://brainly.com/question/14896958
#SPJ4
a sample of an ideal gas has a volume of 2.37 l2.37 l at 286 k286 k and 1.06 atm.1.06 atm. calculate the pressure when the volume is 1.67 l1.67 l and the temperature is 305 k.
The pressure when the volume is 1.67 l and the temperature is 305 k 1.604 atm.
Using the ideal gas equation:-
Given;
P₁ = 1.06 atm
V₁ = 2.37 L
T₁ = 286 K
P₂ = ?
V₂ = 1.67
T₂ = 305 K
P₁V₁/T₁ =P₂V₂/T₂
P₂ = P₁V₁T₂ /T₁V₂
= 1.06 × 2.37 × 305 / 286 × 1.67
= 766.221 / 477.62
= 1.604 atm
What is Pressure?
The physical force exerted on an item is called Pressure. The force applied is vertical to the surface of items per unit area. The basic formula for pressure is Force/Area.
What is an ideal gas?
An ideal gas is an intransigent gas composed of a set of irregularly-moving point atoms that interact only through elastic conflicts.
To know more about Pressure, visit:-
https://brainly.com/question/23747679
#SPJ4
Calculate the standard reaction entropy for the decomposition of 1 mol calcite to carbon dioxide gas and solid calcium oxide at 25°c.
For the breakdown of 1 mol of calcite to carbon dioxide plus white precipitate oxide at 25°c, the standard reaction entropy is 160.6 J/mol*K.
How do you define reaction in chemistry?In a chemical reaction, one or more materials known as reactants—are changed into one or more additional substances as products. Chemical elements or chemical compounds make up substances.
What kind of response?Synthesis, decomposition, only one, double-replacement, and combustion are the five fundamental varieties of chemical reactions. You can classify a reaction into one of these groups by looking at the reactants and products. Several categories will apply to some reactions.
To know more about Reaction visit:
https://brainly.com/question/28984750
#SPJ4
The complete question is-
Calculate the standard reaction entropy for the decomposition of 1 mol calcite to carbon dioxide gas and solid calcium oxide at 25°C.
CaCO₃ (s) → CO₂ (g) + CaO (s)
(a). -160.6 J/mol*K
(b). 160.6 J/mol*K
(c). 346.4 J/mol*K
(d). -266.9 J/mol*K
if the volume of the system is reduced to one half of its original volume and the system is allowed to restablish equilibrium at 298k, what will be the pressure in atm, of the water vapor at the new volume
According to ideal gas law ;
PV = nRT where, P refers to the pressure of the ideal gas, V is the volume of the ideal gas, n is the total amount of ideal gas that is measured in terms of moles, R is the universal gas constant, and T is the temperature.
If Volume of system is reduced to half = V/2
then; P = 2(nRT/V), Pressure will be doubled to reestablish the equilibrium.
What is Chemical equilibrium?
Chemical equilibrium, condition in the course of a reversible chemical reaction in which no net change in the amounts of reactants and products occurs. A reversible chemical reaction is one in which the products, as soon as they are formed, react to produce the original reactants.
Learn more about Equilibrium here ; https://brainly.com/question/4289021?referrer=searchResults
#SPJ4