Answer:
24.5 m/s
Explanation:
KE=1/2mv^2
15000=1/2(50)v^2
30000=(50)v^2
600=v^2
sqrt600=v
v=24.5 m/s!!
You are riding in the passenger seat of a car as it goes around a tight turn. You slide across the seat to the passenger side door. Which statement below properly describes what is happening? a. You are exerting a centripetal force on the door. b. The door and seat are exerting a centripetal force on you that balances the centrifugal force of the turn. c. The car seat exerts a centripetal force on you, but not enough to keep you in place, so the door exerts the rest. d. The centrifugal force is greater than the force of friction between you and the seat, so you slide outward.
Answer:
Explanation:
answer C looks good
there isn't really a "centrifugal " force. :/ when we are pushed "back" in a car seat.. it's not because there is a force pushing us backwards... but a force pushing us forwards.. just like when turning too, a force pushes us into the corner, not a force pushing out of the corner. :)
I want answer plzz??
Answer:
a=0.5g ms^-2
Explanation:
Let tension be T
acceleration be a
g be gravitational acceleration 9.81ms^-2
They share same T and a
by force diagram the net force on m:
T-2.1g=2.1a
net force on M:
6.3g-T=6.3a
solve:
(T-2.1g)/(6.3g-T)=2.1a/6.3a
3T+T=12.6g
T=3.15g newton
3.15g-2.1g=2.1a
a=0.5g ms^-2
Two automobiles, each of mass 1000 kg, are moving at the same speed, 20 m/s, when they collide and stick together. In what direction and at what speed does the wreckage move (a) if one car was driving north and one south (b) if one car was driving north and one east?
A. The wreckage after collision is moving at the speed 18 m/s to the south.
B. The wreckage after collision is moving at the speed 9.0 m/s to the north.
C. The wreckage after collision is moving at the speed 9.0 m/s to the south.
D. The wreckage after collision is moving at the speed 18 m/s to the north.
E. The wreckage after collision is motionless.
Answer:
The reckage after collision is motionless (E)
Explanation:
The first law of thermodynamics states that energy is neither created nor destroyed but is converted from one form to another.
The kind of collision described in the question above is known as a perfectly inelastic collision, and in this type of collision, the maximum kinetic energy is lost because the objects moving in opposite directions have a resultant momentum that is equal, but in opposite directions hence they cancel each other out.
The calculation is as follows:
m₁v₁ + m₂v₂
where:
m₁ = m₂ = 1000kg
v₁ = 20 m/s
v₂ = -20 m/s ( in the opposite vector direction)
∴ resultant momentum = (1000 × 20) + (1000 × -20)
= 20000 - 20000 = 0
∴ The reckage after collision is motionless
Answer:
The wreckage after collision is moving at the speed 18 m/s to the south.
Explanation:
What x rays travel at the speed of
If an object is placed at distance of 16cm from a plane mirror, How far would it be from it's image?
Explanation:
A plane mirror always creates an image with the same distance to the mirror as the object, only in the other direction. So both of them have a distance of 10cm, one is 10cm to the left, one 10cm to the right, thus their mutual distance is 20cm
(What is the weight of a 50 kg woman at the top of Jupiter's
atmosphere, where g = 24.8 N/kg? Give your answer in both
newtons and pounds.
Answer:
The correct answer is - 1240 newtons; 278.763 lbs.
Explanation:
Please answer :>
40 POINTS
Answer:
rotates
Explanation:
I'm so bored
yrfgggghhgghhyuj
Which graph illustrates constant speed?
A
B
C
D
I will reward you
Answer:
D because the line isn't changing which means constant speed it's going at the same rate so yea it's D
Answer:
D.
Hope that helps!?
Explanation:
Can someone plz explain :
Two cars have the same mass, the first car is moving towards the east and the second is
stationary. If the two cars merge together after a collision and head towards the east their speed
after the collision is equal to.......
A)1/4vi b)1/2vi c)vi d) 2vi
Answer: Option b, the final velocity is half of the initial velocity.
Explanation:
Here we will use the conservation of the total momentum of a system.
This means that the total momentum at the beginning must be the same as the final momentum.
Where momentum is:
P = M*v
Initially, we have two cars, both with the same mass M, and only one of them has a velocity v.
Then the initial momentum is:
P = M*v + M*0 = M*v
After the collision, the two cars move together. Then the total mass that is moving is equal to the sum of the masses of the cars, this is 2*M
and we can suppose that the two cars move at a final velocity v'
Then the final momentum is:
P' = (2*M)*v'
Now we use the conservation of momentum, then:
P = P'
M*v = (2*M)*v'
Now we need to solve this for v'
(M*v)/(2*M) = v'
v/2 = v'
This means that the final velocity is half of the initial velocity.
Then the correct option is option b.
a rugby player passes the ball 5.34 m across the field, where it is caught at the same height as it left his hand. at what angle was the ball thrown if its initial speed was 7.7 m/s, assuming that the smaller of the two possible angles was used
Answer:
[tex]31.035^{\circ}[/tex]
Explanation:
x = Displacement in x direction = 5.34 m
t = Time taken to travel the displacement
y = Displacement in y direction = 0
u = Initial velocity of ball = 7.7 m/s
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
Displacement in x direction is given by
[tex]x=u\cos\theta t\\\Rightarrow t=\dfrac{5.34}{7.7 \cos\theta}[/tex]
Displacement in y direction is given by
[tex]y=u\sin\theta t-\dfrac{1}{2}gt^2\\\Rightarrow 0=7.7\sin\theta \dfrac{5.34}{7.7\cos\theta}-\dfrac{1}{2}\times 9.81 (\dfrac{5.34}{7.7\cos\theta})^2\\\Rightarrow 0=7.7\sin\theta-4.905\times \dfrac{5.34}{7.7\cos\theta}\\\Rightarrow 0=7.7^2\sin\theta \cos\theta-4.905\times 5.34\\\Rightarrow 0=7.7^2\dfrac{\sin2\theta}{2}-4.905\times 5.34\\\Rightarrow 0=7.7^2\sin2\theta-4.905\times5.34\times 2\\\Rightarrow \sin2\theta=\dfrac{4.905\times 5.34\times 2}{7.7^2}\\\Rightarrow 2\theta=\sin^{-1}\dfrac{4.905\times 5.34\times 2}{7.7^2}[/tex]
[tex]\Rightarrow \theta=\dfrac{62.07}{2}\\\Rightarrow \theta=31.035^{\circ}[/tex]
The angle at which the ball was thrown is [tex]31.035^{\circ}[/tex].
coefficient of viscosity of a glycerine is 8.4 poison explain
Answer:
coefficient of viscosity of 8.4 poison denotes that the tangential frictional force acting per unit area when divided by the velocity gradient as a result of streamline flow conditions gives 8.4.
Explanation:
Viscosity is defined as the extent to which a fluid can resist flow when a force is applied to it.
Now, coefficient of viscosity is the term in which viscosity is calculated. It is basically the tangential frictional force acting per unit area which is divided by the velocity gradient as a result of streamline flow conditions.
Thus, coefficient of viscosity of 8.4 poison denotes that the tangential frictional force acting per unit area when divided by the velocity gradient as a result of streamline flow conditions gives 8.4.
4. Name three examples of "concentrated" forms of energy.
Answer:
Nuclear power plant.
Gas stove.
Dam.
Gas pump.
Geothermal heat pump.
Power lines.
Solar panels.
Windmills.
Explanation:
Hope this helps :))
Answer:
gasoline,solar panels,geothermal heat pump,windmills
Explanation:
Which of the following is a contact force?
Magnetic
Friction
Electric
Gravity
Answer:
magnetic
Explanation:
because magnetic attracted other magnetic by pulling them contact forcely that creates a strong force when they are nearly close to one another
Explain what happens to the movement, energy and arrangement of particles during the process
of distillation.
Answer:
Distillation separates a liquid from a solution. For example, water can be separated from salty water by simple distillation. This method works because the water evaporates from the solution, but is then cooled and condensed into a separate container. The salt does not evaporate and so it stays behind.
Due to historical difficulty in delivering supplies by plane, one of your colleagues has suggested you develop a catapult for slinging supplies to affected areas, similar to the electromagnetic lift catapults used to launch planes from aircraft carriers. This catapult is located at a fixed point 400 meters away and 50 meters below the target site. The catapult is capable of launching the payload at 67 meters per second and an initial launch angle of 50 degrees. Using your knowledge of kinematics equations, determine whether this would be sufficient to deliver the payload to the drop site.
Answer:
Please see below as the answer is self-explanatory.
Explanation:
We can take the initial velocity vector, which magnitude is a given (67 m/s) and project it along two directions perpendicular each other, which we choose horizontal (coincident with x-axis, positive to the right), and vertical (coincident with y-axis, positive upward).Both movements are independent each other, due to they are perpendicular.In the horizontal direction, assuming no other forces acting, once launched, the supply must keep the speed constant.Applying the definition of cosine of an angle, we can find the horizontal component of the initial velocity vector, as follows:[tex]v_{avgx} = v_{o}*cos 50 = 67 m/s * cos 50 = 43.1 m/s (1)[/tex]
Applying the definition of average velocity, since we know the horizontal distance to the target, we can find the time needed to travel this distance, as follows:[tex]t = \frac{\Delta x}{v_{avgx} } = \frac{400m}{43.1m/s} = 9.3 s (2)[/tex]
In the vertical direction, once launched, the only influence on the supply is due to gravity, that accelerates it with a downward acceleration that we call g, which magnitude is 9.8 m/s2.Since g is constant (close to the Earth's surface), we can use the following kinematic equation in order to find the vertical displacement at the same time t that we found above, as follows:[tex]\Delta y = v_{oy} * t - \frac{1}{2} *g*t^{2} (3)[/tex]
In this case, v₀y, is just the vertical component of the initial velocity, that we can find applying the definition of the sine of an angle, as follows:[tex]v_{oy} = v_{o}*sin 50 = 67 m/s * sin 50 = 51.3 m/s (4)[/tex]
Replacing in (3) the values of t, g, and v₀y, we can find the vertical displacement at the time t, as follows:[tex]\Delta y = (53.1m/s * 9.3s) - \frac{1}{2} *9.8m/s2*(9.3s)^{2} = 53.5 m (5)[/tex]
Since when the payload have traveled itself 400 m, it will be at a height of 53.5 m (higher than the target) we can conclude that the payload will be delivered safely to the drop site.What is the weight of a 25 kg object on Earth with an acceleration due to gravity of 9.8m/s/s?
2.45 n
24.5 n
245 n
2450 n
When you are driving on the freeway and following the car in front of you, how close is too close? Let's do an estimation.
1. Pick a car model (preferably the one you drive, but can also be any car of your dream), and find its stopping distance at highway speeds (you can usually find this type of data online).
2. Assuming that the car in front of you suddenly does a hard brake. For simplicity, assume that its braking performance is about the same as yours. Then also assume a reasonable amount of reaction time on your part (the time delay between seeing the brake lights lit up and applying your own brake). In order for you not to run into the car your are following, what's the closest distance you need to keep between the two cars?
3. Redo the same calculation if the vehicle in front of you is a typical big-rig truck. Find its braking data online.
4. There is a rule of thumb which says that you must stay one car length behind the car in front of you for every 10 mi/h of driving speed. From your calculation, does this rule make sense?
Answer:
1) v= 90km/h d = 70 m, 2) x₁ = v t_r, x₁ = 6.25 m, 3) x₁=6.25 no change
4) x = 22 m
Explanation:
1) for the first part, you are asked to find the minimum safety distance with the vehicle in front
The internet is searched for the stopping distance for two typical speeds on the highway
v (km/ h) v (m/s) d (m)
90 25 70
100 27.78 84
the safe distance is this distance plus the distance traveled during the person's reaction time, which can be calculated with infirm movement
v = x / t_r
x₁ = v t_r
the average reaction time is t_r = 0.25s for a visual stimulus and t_r 0.17 for an auditory stimulus
therefore the safe distance is
x_total = x₁ + d
2) The distance is the sum of the distance traveled in the reaction
x₁ = v t_r
for v = 90 km / h
x₁ = 25 0.25
x₁ = 6.25 m
for v = 100 km / h
x₁ = 27.78 0.25
x₁ = 6.95 m
the total distance is
x_total = x₁ + d
for v = 90 km / h
x_total = 25 0.25 + 70
x_total = 76.25 m
this is the distance until the cars stop and do not collide
3) the stopping distance of a truck is
v = 90 km / h d = 100 m
in this case we see that the braking distance is much higher,
the safe distance is given by the distance traveled during the reaction, as the truck brakes slower than the car this distance does not change
4) let's analyze the empirical rule: maintain the length of a car for each increase in speed of v = 10 m / h = 4.47 m / s
for the car case at v = 90km / h = 25 m / s
according to this rule we must this to
x = 25 / 4.47 = 5.6 cars
each modern car is about 4 m long so the distance is
x = 22 m
we see that this distance is much greater than the reaction distance so it does not make much sense
19. In a turtle race, a 20 kg turtle moves with a velocity of 0.1 m/s. What is the kinetic energy of the turtle?
A. 20 J
B. 0.2 J
C. 0.1 J
A spring has a spring constant of 65.5 N/m and it is
stretched with a force of 15.3 N. How far will it stretch?
What happens when a moving object experiences no net force?
Answer:
An object with no net forces acting on it which is initially at rest will remain at rest. If it is moving, it will continue to move in a straight line with constant velocity. Forces are "pushes" or "pulls" on the object, and forces, like velocity and acceleration are vector quantities.
g Design an experiment you can use to determine the mass of the metal cylinder. When you explain your experiment, be sure to mention: What is the underlying model (equation) that you can use to determine the mass from your measurements
Answer:
m = [tex]\frac{k}{g}[/tex] x,
graph of x vs m
Explanation:
For this exercise, the simplest way to determine the mass of the cylinder is to take a spring and hang the mass, measure how much the spring has stretched and calculate the mass, using the translational equilibrium equation
F_e -W = 0
k x = m g
m = [tex]\frac{k}{g}[/tex] x
We are assuming that you know the constant k of the spring, if it is not known you must carry out a previous step, calibrate the spring, for this a series of known masses are taken and hung by measuring the elongation (x) from the equilibrium position, with these data a graph of x vs m is made to serve as a spring calibration.
In the latter case, the elongation measured with the cylinder is found on the graph and the corresponding ordinate is the mass