Answer:
question is not clear.......
The specific heat capacity of iron is 450.5. A 15.5 kg block of iron with
an initial temperature of 20 degrees Celsius is heated with 250 J. What will
the final temperature of the iron be?
Answer:
[tex]T_f=20.03^{\circ} C[/tex]
Explanation:
Given that,
The specific heat capacity of iron is 450.5 J/g°C
The mass of block of iron, m = 15.5 kg
Initial temperature, [tex]T_i=20^{\circ} C[/tex]
Heat required, Q = 250 J
We need to find the final temperature of the iron. The formula for heat required is given by :
[tex]Q=mc\Delta T\\\\Q=mc(T_f-T_i)\\\\\dfrac{Q}{mc}=(T_f-T_i)\\\\T_f=\dfrac{Q}{mc}+T_i\\\\T_f=\dfrac{250}{15.5(450.5)}+20\\\\T_f=20.03^{\circ} C[/tex]
So, the final temperature of the iron is [tex]20.03^{\circ} C[/tex].
In handball, who is the only player allowed in the goalie area?
Answer:
Only the goalie is allowed inside the goal crease. The only exception when another player is allowed in the goal area is when they take off from outside the goal area, and shoots or passes the ball before landing. To avoid interference with other players, the player must then exit the goal area as soon as possible.
Explanation:
A squirrel starts at rest and accelerates at 2.3 m/s^2 for 5.22 seconds. What is it's final velocity?
Please provide the variable, number, and unit e.g., a= 1.34 m/s^2
Answer:
12.259 m/s
Explanation:
An object starting at rest and accelerating at a constant acceleration a for t seconds has a velocity of
[tex]v=at[/tex]
If we substitute in the values a = 2.3 m/s² and t = 5.22 s, we get a velocity of
[tex]2.3(5.22)=12.259[/tex] m/s
explain the oscillations or motion of both types of waves
This figure shows a
O a. transverse wave
O c. electromagnetic spectrum
Ob. decibel scale
Od compressional wave
Answer:
transverse i think
Explanation:
when a chemical reaction occurs, chemical bonds ______ break and new chemical bonds form to create the __________
Answer:
a) reactant
b) product
Explanation:
During a chemical reaction, the reactants interact among themselves in a specific temperature, pressure, pH, enzyme etc. Due to various intra and inter molecular and atomic interactions, the chemical bonds in the reactants break down. Formation of new chemical product is governed by the formation of new bond (ionic, covalent, hydrogen vander waal etc. )
when a material absorbs energy from light the energy causes the material to do what?
Answer:
To change.
Explanation:
The Law of Conservation of energy states that energy cannot be destroyed but can only be transformed or converted from one form to another. For example, light energy to heat energy.
When a material absorbs energy from light the energy causes the material to change.
D.
because the time is used up due to irrelevant and unnecessary topics
& Every time your group conducts a meeting, nothing is accomplished
that intervene the discussion.
As the group leader, how will you keep your members focused on the
agenda of the meeting using the restriction strategy?
A. Tell them that they will get kicked out from the group if they will
B. End the meeting immediately as soon
as the group begins to
talk about other things irrelevant to the agenda.
c. Give instructions before the meeting starts to confine and limit
what they can say.
D. Show disappointment.
not cooperate.
Answer:
b because I took the quiz
A spring has a constant of 875 N/m. What hanging mass will cause this spring to stretch 4.5 m?
Answer:
8) A hanging 7.5 kg object stretches a spring 1.1 m. What is the spring constant? 1 . 1 66. 82 NIMO 9) A spring has a constant of 875 N/m. What hanging mass will cause this spring to stretch 4.5 m? Iouliply then divide 875 X 4. 2- - (4 04. 7919) 10) A spring with a spring constant of 25 N/m is stretched 65 cm. What was the force used? 11) A 25 N force stretches a spring 280 cm. What was the spring constant? 12) A 75 N force stretches a spring 175 cm. What was the proportionality constant? 8) 66.82 N/m 9) 401.79 kg 10) 16.25 N 11) 8.93 N/m 12) 42.86 N/m
Explanation:
A spring has a constant of 875 N/m. and the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.
What is Spring constant?The spring constant is a characteristic of a spring which is defined as the ratio of the force affecting the spring to the displacement which is caused by that force. The SI unit of spring constant is N.m⁻¹ (Newton per meter).
The spring constant is:
F = -k/ x
where, k is the spring constant
F denotes the force,
and x denotes the change in the length of the spring.
k = 875N/m
x = 4.5m
We know that
Kx = mg
m= kx/ g
m = 875 × 4.5/ 9.8
m = 401.78kg
Therefore, the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.
Learn more about Spring constant here:
https://brainly.com/question/14159361
#SPJ5
The acceleration due to gravity is 9.81 m/s2, towards the Earth. Rain falling from an altitude of 9,000 m would fall for about 1.5 minutes before hitting the ground (ignoring air resistance). What would be the final speed of a raindrop by the time it reaches the ground?
Answer:
the final speed of the rain is 541 m/s.
Explanation:
Given;
acceleration due to gravity, g = 9.81 m/s²
height of fall of the rain, h = 9,000 m
time of the rain fall, t = 1.5 minutes = 90 s
Determine the initial velocity of the rain, as follows;
[tex]h = ut + \frac{1}{2} gt^2\\\\9000 = 90u + \frac{1}{2} (9.8)(90)^2\\\\9000 = 90u + 39690\\\\90u = -30690\\\\u = \frac{-30690}{90} \\\\u = -341 \ m/s[/tex]
The final speed of the rain is calculated as;
[tex]v^2 = u^2 + 2gh\\\\v^2 = (-341)^2 + 2(9.8\times 9000)\\\\v^2 = 292681\\\\v = \sqrt{292681} \\\\v = 541 \ m/s[/tex]
Therefore, the final speed of the rain is 541 m/s.
Answer:
The magnitude of the final speed of a raindrop by the time it reaches the ground will be 541.45 m/s.
Explanation:
The final speed of the raindrop can be found using the following equation:
[tex] v_{f} = v_{0} - gt [/tex]
Where:
[tex]v_{f}[/tex]: is the final speed =?
[tex]v_{0}[/tex]: is the initial speed
g: is the acceleration due to gravity = 9.81 m/s²
t: is the time = 1.5 min
First, we need to find the initial speed:
[tex] y_{f} = y_{0} + v_{0}t - \frac{1}{2}gt^{2} [/tex]
Where:
[tex]y_{f}[/tex]: is the final height = 0
[tex]y_{0}[/tex]: is the initial height = 9000 m
Hence, the initial speed is:
[tex] v_{0} = \frac{y_{f} - y_{0} + \frac{1}{2}gt^{2}}{t} = \frac{0 - 9000 m + \frac{1}{2}9.81 m/s^{2}*(90 s)^{2}}{90 s} = 341.45 m/s [/tex]
Hence, the final speed is:
[tex] v_{f} = v_{0} - gt = 341.45 m/s - 9.81 m/s^{2}*90 s = -541.45 m/s [/tex]
Therefore, the magnitude of the final speed of a raindrop by the time it reaches the ground will be 541.45 m/s.
I hope it helps you!
what are the factors that affect orbital velocity
Answer:
the mass of the central body (earth) and the radius of the orbit affect orbital velocity
Explanation:
Which force is an attractive force that is affected by the masses of objects?
A) tension force
B) magnetic force
C) normal force
D) gravitational force
Class: Physical Science B
Answer:
D) gravitational force
What happens to objects in space when they no longer have force accelerating them?
Answer:An object thrown in space will move according to the forces on it in space. For instance, if you threw it in space near the Earth, it would accelerate due to the Earth's gravity. ... If there are no forces on the object, then it will move at a constant speed and direction.
Explanation:
Can anyone please help meee!!!
Answer:
The centripetal acceleration is given by
a = v 2 r = 10 2 25 = 4 m s − 2
Using Newton's Second Law, the centripetal force acting is
F = m a = 900 ⋅ 4 =3600 N
Explanation:
Is a violin and battery potential energy?
Explanation:
In physics, potential energy is the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors. Common types of potential energy include the gravitational potential energy of an object that depends on its mass and its distance from the center of mass of another object, the elastic potential energy of an extended spring, and the electric potential energy of an electric charge in an electric field. The battery is storing the energy but give it something to power and it'll give its energy to the object and a violin strings are like ruber band and if you play the violin it releases a new type of energy sound energy.
1. Find the momentum of an object of mass 5 kg with a velocity of 2 m/s. *
a. 2.5 kg.m/s
O b. 10 kg.m/s
c. 0.25 kg.m/s
d. 20 kg.m/s
Answer:
10kgm/s
Explanation:
Momentum = Mass * Velocity (both in standard units)
Momentum = 5 * 2 = 10kgm/s
An object of mass m is placed on Spring A, which is compressed by distance x. The spring is released and the velocity of the pushed object as it leaves the spring is measured. The experiment is repeated with the same object on Spring B, which is compressed by the same distance x. The object travels faster when pushed by Spring B. What can be concluded?
A .Spring A had a higher elastic potential energy than Spring B.
B. Spring A's spring constant is higher than Spring B's.
C. Spring A's spring constant is lower than Spring B's.
D. Spring A has more mass than Spring B.
Answer:
C
Explanation:
A(n) ________________________ is a molecule that is soluble in both polar and nonpolar solvents.
Answer: ethanol which will dissolve in both water (a polar solvent) and gasoline (a non-polar solvent)
Explanation:
According to the concept of solubility, ethanol is a molecule which is soluble in both polar and non-polar solvents.
What is solubility?
Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.
The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.
Learn more about solubility,here:
https://brainly.com/question/3479494
#SPJ5
please answer and fast i am in a test
Answer:
Online means connected to a network.
Credible means reliable or trustworthy
Cite means to quote from an article or book.
Which part of the electromagnetic spectrum is typically used to make images based on the temperatures of objects?
X-rays
radio waves
infrared light
visible light
Answer:
Which part of the electromagnetic spectrum is typically used to make images based on the temperatures of objects?
X-rays
radio waves
infrared light<<<----- CORRECT
visible light
Explanation:
Edge 2021
Infrared light is typically used to make images based on the temperatures of objects.
What is meant by electromagnetic spectrum?The range of all EM radiation arranged from high to low frequency (short to long wavelength) according to their frequency or wavelength. is known as the electromagnetic spectrum (EM).
Here,
Similar to visible light, X-rays are a type of electromagnetic radiation. X-rays have a higher energy than light, on the other hand, and can penetrate most materials, including the human body.
Images of inside body tissues and structures are produced using medical x-rays.
Electromagnetic energy in the infrared region of the spectrum can be seen by them. There is a relationship between an object's temperature and the electromagnetic radiation it releases since infrared radiation is strongly related to object temperature.
Hence,
Infrared light is typically used to make images based on the temperatures of objects.
To learn more about electromagnetic spectrum, click:
https://brainly.com/question/15576247
#SPJ5
What is the definition of endothermic and exothermic?
pls help on a timer will give brainlist
Answer:
An exothermic process releases heat, causing the temperature of the immediate surroundings to rise. While an endothermic process absorbs heat and cools the surroundings
Explanation:
Answer:
Basically, endothermic feels cooler to touch than exothermic.
Explanation:
Endothermic reactions are just reactions that emit energy (in form of heat) to its surroundings. Exothermic ones, on the other hand, draw energy from its surroundings to occur.
Always think - "Endothermic is cool. Exothermic is not cool."
Can an object with acceleration of zero be in motion?
Answer:
NO
Explanation:
if it has no acceleration then it's not moving
Answer:
Yes when the velocity is constant then the acceleration is said to be zero. Thus an object with 0 acceleration can be in motion.
Let me give you an example to make you more clear
Example:
When a car is traveling at a constant 90 km/h in a straight line has nonzero velocity and zero acceleration.
If a 2 kg spring is compressed by exerting a force of 10 newtons a distance of 50 cm how much work is done?
of the following states of motion, the one which requires balanced forces is:
A: a decrease in speed in a straight line
B: an increase in speed in a straight line
C: constant speed in a straight line
D: a change in the direction of the motion
A balanced force is required for a change in the direction of the motion.
What is a force?According to Newton's second law of motion, the force applied to a body is directly proportional to the product of mass and acceleration of the body.
Balanced forces
Balanced forces are those that are opposite in direction and equal in size. When forces are balanced there is no change in direction.
Thus, when there is change in direction, a balance force can be applied to cancel the change in direction of motion.
Learn more about balanced forces here: https://brainly.com/question/485828
Pls place the words in the right place I'll give brainless and the points!
Explanation:
you measure temperature in degrees celsius using a thermometer. Thermal energy is measured in joules. A larger volume of water will take longer to heat up but will store more energy than the smaller object. However, a smaller object will lose it's heat faster than a larger object. A cup of tea has less thermal energy than a swimming pool.
Emily roller skates with a constant speed
of 8 miles per hour. How far can she travel
in 3 hours? D = SxT
Answer:
She can travel 24 miles in 3 hours.
2.
A hydraulic jack raises a car of 250 N weight to a height of 5.8 m in 5.0 s. The jack does work at a rate of
290 W
216 W
275 W
250 W
Which of the following scenarios demonstrates a transfer
between kinetic energy and potential energy?
Answer:
what scenarios? but kinetic is energy in motion (like a ball rolling) and potential is stored energy (ball laying on ground)
example (kinetic to potential) : baseball flying and and lands on the ground then stops rolling
roller coaster rolling down a hill then stopping (kinetic to potential)
roller coaster on top of a hill and then going down (potential to kinetic)
Explanation:
A stationary 10 kg object is located on a table near the surface of the earth. The coefficient of kinetic friction between the surfaces is 0.2. A horizontal force of 40 N is applied to the object.
Answer:
2.04m/s²
Explanation:
Complete Question
A stationary 10 kg object is located on a table near the surface of the earth. The coefficient of kinetic friction between the surfaces is 0.2. A horizontal force of 40 N is applied to the object. Find the acceleration of the object.
According to Newtons second law;
\sum F_x = ma_x
F_m - F_f = ma_x
Fm is the applied force
Ff is the frictional force
m is the mass
a is the acceleration
Substitute the given values
40N - nmg = 10a
40 - 0.2(10)(9.8) = 10a
40 - 19.6 = 10a
20.4 = 10a
a = 20.4/10
a = 2.04m/s²
Hence the acceleration of the object is 2.04m/s²
What is the momentum of a 8 kilogram cart moving with a speed of 12 meters per
second?
Answer:
Explanation:
momentum = mv
m = 8 kg
v = 12 m/s
momentum = 8 * 12 = 96 kg m/s