Match the landform to its description.

People Who Answer First And Got This Right, Will Be Mark As Brainilist!

Answer:

14,448 J of heat would it take to completely vaporize 172 g of this liquid at its boiling point.

Explanation:

The heat Q that is necessary to provide for a mass m of a certain substance to change phase is equal to Q = m*L, where L is called the latent heat of the substance and depends on the type of phase change.

During the evaporation process, a substance goes from a liquid to a gaseous state and needs to absorb a certain amount of heat from its immediate surroundings, which results in its cooling. The heat absorbed is called the heat of vaporization.

So, it is called "heat of vaporization", the energy required to change 1 gram of substance from a liquid state to a gaseous state at the boiling point.

In this case, being:

and replacing in the expression Q = m*L you get:

Q=172 g*84 [tex]\frac{J}{g}[/tex]

Q=14,448 J

14,448 J of heat would it take to completely vaporize 172 g of this liquid at its boiling point.

Answer:

please follow me

Explanation:

A displacement reaction is the one when a more reactive substance displaces a less reactive one from its salt solution whereas a double displacement reaction is the one where a mutual exchange of ions happens between two compounds.

Answer:

3.18 L

Explanation:

Step 1: Given data

Step 2: Convert P₁ to mmHg

We will use the conversion factor 1 atm = 760 mmHg.

0.985 atm × 760 mmHg/1 atm = 749 mmHg

Step 3: Calculate the final volume of the gas

Assuming ideal behavior and constant temperature, we can calculate the final volume using Boyle's law.

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁/P₂

V₂ = 749 mmHg × 3.65 L/861.0 mmHg = 3.18 L

Answer:12

Explanation:

Answer:

A)Trial 1 because the average rate of reaction is lower.

Explanation:

I accidentally gave myself low rating my bad

The statement that best explain which trial has a lower concentration of the reactants is Trial 1, because this reaction lasted for a longer duration than Trial 2.

Chemical reaction refers to reaction that take place between reacting substances in which the chemical substances are transformed to products.

When the concentration of the reactants increases, more molecules tend to interact with each other in order to form new compounds, and the rate of reaction increases. When the concentration of the reactants reduces, there are little of that molecule present, and the rate of reaction decreases

Therefore, The statement that best explain which trial has a lower concentration of the reactants is Trial 1, because this reaction lasted for a longer duration than Trial 2.

Learn more about chemical reaction below.

https://brainly.com/question/16416932

Answer:

Ar(Mg)=24g

Ar(Cl)=35,5 and Cl2=35,5×2=71g

m=24g+71g=95g

Answer:

response I believe

Explanation:

i'm pretty sure it's a response cause it's the animal responding to needing water and being thirsty

hope this helps! :)

Answer:

101.62 grams of water is given o when 62.1 g of propane burns.

Explanation:

Propane gas (C₃H₈) burns with oxygen gas and products carbon dioxide gas and liquid water. The balanced reaction is:

C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O

By stoichiometry, the following amounts of moles of each compound participate in the reaction:

Being the molar mass of each compound:

By stoichiometry, the following mass quantities of each compound participate in the reaction:

Then you can apply the following rule of three: if by stoichiometry 44 grams of propane produces 72 grams of water, 62.1 grams of propane how much mass of water does it produce?

[tex]mass of water=\frac{62.1 grams of propane*72 grams of water}{44 grams of propane}[/tex]

mass of water= 101.62 grams

101.62 grams of water is given o when 62.1 g of propane burns.

Answer:

I think it's thermochemical reaction and sorry if it's wrong

Answer:

1 N2 + 3 H2 --> 2 NH3 :))) !!

Answer:

salt

Explanation:

When acid and base solutions react, they produce water and a neutral ionic compound called a salt.

Answer:

A. 324 J

Explanation:

Answer:

it is b

Explanation: As the carbon dioxide is released, calcite is precipitated or redeposited on cave walls, ceilings and floors. As the redeposited minerals build up after countless water drops, a stalactite is formed.

Answer: hewo, there! your answer is Below

A single disturbance passing through a medium is called a pulse.

Explanation:

When the disturbances are repeated in a periodic manner, the pulses generate a continuous wave. Longitudinal waves (also called compression waves – a slinky pushed and pulled) – moves parallel (same direction) to the wave motion.

Hope this helps !!

Have a amazing day !!!!

Answer:

When the energy of a wave passes through the medium, particles of the medium move. The more energy the wave has, the farther the particles of the medium move. The distance the particles move is measured by the wave's amplitude.

Explanation:

A single disturbance passing through a medium is called a pulse. When the disturbances are repeated in a periodic manner, the pulses generate a continuous wave. Longitudinal waves (also called compression waves – a slinky pushed and pulled) – moves parallel (same direction) to the wave motion.

Based on the information given, the image represents a negatively charged fluoride atom (Option B)

An atom is composed of a centrally placed nucleus (containing protons and neutrons) and a cloud of electrons revolving round it.

From the question given above, the following data were obtained:

Charge = Proton – Electron

Charge = 9 – 10

Charge = –1

Note

Element with proton number of 9 is fluorine

Thus, we can conclude that the image represents a negatively charged fluoride ion (Option B)

Learn more about composition of atoms:

https://brainly.com/question/886387

Answer:

B

Explanation:

Answer:

K = 0.5

Explanation:

Based on the reaction:

PCl₃ + Cl₂ ⇄ PCl₅

The equilibrium constant, K, is defined as:

K = P PCl₅ / P PCl₃ * P Cl₂

Where P represent the pressure at the equilibrium for each one of the gases involved in the equilibrium.

As:

P PCl₅ = 1.0atm

P PCl₃ = 1.0atm

P Cl₂ = 2.0atm

K = 1.0atm / 1.0atm * 2.0atm

Answer:

The Food Chain: The answer has to do with trophic levels. As you probably know, the organisms at the base of the food chain are photosynthetic; plants on land and phytoplankton (algae) in the oceans. These organisms are called the producers, and they get their energy directly from sunlight and inorganic nutrients.

Explanation:

Brainliest?

Answer:

17.18

Explanation:

(1 in = 2.54 cm; 12 in = 1 ft)

Formula:- Divide the length value by 30.48

523.7 ÷ 30.48 = 17.181

Thus, The answer is 17.181

-TheUnknownScientist

Answer:

17.18

Explanation:

I hope its helpful......

Answer:

Anuclear power plant is used to generate electricity

Answer:

Anuclear power plant is used to generate electricity

thank me later

Explanation:

Option D I got it right

ANSWER: C (ENERGY WAS RELEASED WHEN THE MOLECULE WAS FORMED FROM ITS ELEMENTS.)

HOPE THE OTHER PERSON IS WRONG!

Answer: the answer is D the last one.

Explanation:

hope this helps! have a good day! :) ^-^

Answer: MgAl2O4 or Spinel (gemstone)

Explanation:

The solute wether electrolyte or a nonelectrolyte, has the greater effect on the boiling point when a given amount of each solute is dissolved in the same mass of water The nonelectrolyte does because it dissociates into ions.

Solute refers to substances or liquid which can readily dissolve in a solvent. It's concentration is lower to that of solvent.

Therefore, The solute wether electrolyte or a nonelectrolyte, has the greater effect on the boiling point when a given amount of each solute is dissolved in the same mass of water The nonelectrolyte does because it dissociates into ions

Learn more about solute below.

https://brainly.com/question/16083884

#SPJ2

Answer:

D: The electrolyte does because it dissociates into ions.

Explanation:

Respiration is the chemical process by which organic compounds release energy. The compounds change into different ones by exergonic reactions. The hydrolysis of adenosine triphosphate (ATP) to adenosine diphosphate (ADP) and phosphoric acid (Pi) releases energy (it is an exergonic reaction).

Answer:

116.88 g

Explanation:

Step 1: Write the balanced equation for the synthesis of NaCl

Na + 1/2 Cl₂ ⇒ NaCl

Step 2: Calculate the moles corresponding to 45.978 g of Na

The molar mass of Na is 22.990 g/mol.

45.978 g × 1 mol/22.990 g = 1.9999 mol

Step 3: Calculate the number of moles of NaCl formed from 1.9999 moles of Na

The molar ratio of Na to NaCl is 1:1. The moles of NaCl formed are 1/1 × 1.9999 mol  = 1.9999 mol.

Step 4: Calculate the mass corresponding to 1.9999 moles of NaCl

The molar mass of NaCl is 58.443 g/mol.

1.9999 mol × 58.443 g/mol = 116.88 g

Answer:

The initial volume in mL is 5959.2 mL

Explanation:

As the number of moles of a gas increases, the volume also increases.  Hence, number of moles and volumes are directly proportional i.e

n ∝ V

Where n is the number of moles and V is the volume

Then, n = cV

c is the proportionality constant

∴n/V = c

Hence n₁/V₁ = n₂/V₂

Where n₁ is the initial number of moles

V₁ is the initial volume

n₂ is the final number of moles

and V₂ is the final volume.

From the question,

n₁ = 0.693 moles

V₁ = ?

n₂ = 0.928 moles

V₂ = 7.98 L

Putting the values into the equation

n₁/V₁ = n₂/V₂

0.693 / V₁ = 0.928 / 7.98

Cross multiply

∴ 0.928V₁ = 0.693 × 7.98  

0.928V₁ = 5.53014

V₁ = 5.53014/0.928

V₁ = 5.9592 L

To convert to mL, multiply by 1000

∴ V₁ = 5.9592 × 1000 mL

V₁ = 5959.2 mL

Hence, the initial volume in mL is 5959.2 mL

Answer:

Yes, it does, it helps very much :))

Explanation:

Answer:

78878

Explanation: