Answer:
Gravitational pull of the sun
Explanation:
Cancer can be treated with:
a) Radio waves
b) Infrared waves
c) Gamma wavesph
Answer: C. gamma waves.
Explanation:
:)
1. A Zambeef delivery track travels 18 km north, 10 km east, and 16 km south. What is its final displacement from the origin?
Answer:
10.2 km
Explanation:
Displacement is the shortest distance from your original position after movement.
Now, the Zambeef delivery truck moves 18 km north and then 10 km east and then 16 km south.
This means that vertically the truck is 2km short of the 18 km he travelled north..
So we can find the displacement using pythagoras theorem..
Let d be the distance from the current position to the initial position.
Thus;
d² = 2² + 10²
d² = 4 + 100
d = √104
d ≈ 10.2 km
I have attached a diagram showing the direction of this displacement
Weight is the amount of matter in an object.
True or False
Answer:
False
Explanation:
The mass of an object is normally known as the weight of the object. but mass is the amount of matter in the object. Weight is the force exerted on an object by gravity
Answer: False
Explanation: mass is the amount of matter in an object
When conducting research,
are unintentional factors that creep into your experiment and have the potential to affect or even spoil your results.
a. confounding variables
b. replication digits
c. extrapolating factors
d. independent variables
Answer:
a. confounding variables.
Explanation:
An experiment can be defined as an investigation which typically involves the process of manipulating an independent variable (the cause) in order to be able to determine or measure the dependent variable (the effect).
This ultimately implies that, an experiment can be used by scientists to show or demonstrate how a condition causes or gives rise to another i.e cause and effect, influence, behavior, etc in a sample.
In an experiment , the variable being manipulated by an experimenter is known as an independent variable while the dependent variable is the event expected to change when the independent variable is manipulated.
A confounding variable can be defined as a variable that generally influences both the independent and dependent variable in an experiment or research study. Thus, it creates an association between the two variables in an experiment.
Hence, when conducting research, confounding variables are unintentional factors that creep into your experiment and have the potential to affect or even spoil your results.
2. The motion of roller coasters depends upon the conversion of potential
and kinetic energy. A 200 kg car starts from rest at the top of a hill with a
height of 30 m.
Which of the following is this car's kinetic energy at the bottom of the hill?
Answer:
58,800 Joules
Explanation:
I used the formula for Potential energy which is PE = mgh
200 kg x 9.8 m/s^2 x 30 m = 58,800 J
At the very tops of the rollercoaster is maximum PE which is 58,800 J and 0 J of KE, but at the very bottom is maximum KE (kinetic energy) which is 58,800 Joules but 0 J of PE. This is because energy can not be destroyed ONLY converted
A pendulum is swinging. It swings 85 complete swings and this takes 102 seconfs. What is the frequency? A. 0.83 Hz B.17Hz C.187 Hz D.1.2 Hz
Answer:
A: 0.83 Hz
Explanation:
Frequency can be calculated in a multitude of ways. The one way that is going to help you solve this problem is (# of times/seconds)
so you would divide 85 swings/102 seconds
= 5/6 or 0.8333 Hz
so your answer is A
Describe how a radiation is similar to b- radiation
Complete question is;
Describe how α-radiation is similar to β-radiation?
Answer:
Explained below
Explanation:
The similarity between both alpha radiation and beta radiation is that in both cases, they both show deflection when they go through electric and magnetic fields. Although alpha deflects towards the negative plate while bets deflects towards the positive plate.
Secondly they both have high speeds. Just that alpha is from the helium nucleus while beta is from electrons.
Gravitational potential energy is
O the energy that an object has when it is at a
certain elevation, h
the energy of an object at rest
O the energy that an object has because it is in
motion
The cnone of the above
magnetic induction cannot be done in a wood why
Answer:
Magnetic induction cannot be done in a wood because it is not a magnetic person like iron , nickel,and cobalt
What are the key features of stem cell therapy?
Answer:
The two defining characteristics of a stem cell are perpetual self-renewal and the ability to differentiate into a specialized adult cell type.
Answer:
Stem cells have the ability to differentiate into specific cell types. The two defining characteristics of a stem cell are perpetual self-renewal and the ability to differentiate into a specialized adult cell type.
(Don't answer that there is no image, its a simple question)
If you have 2 of the 3 measurements of an object can you find the 3rd?
Explain:
Answer:
yes
Explanation:
of course indeed correct
Objects 1 and 2 attract each other with a electrostatic force of 36.0 units. If the charge of Object 1 is doubled, then the new electrostatic force will be units.
If the charge on the object is doubled then the new electrostatic force is 72 units.
What does the term "electrostatic force" mean?Non-contact forces, such as electrostatic forces, pull or push on objects without actually making contact with them. When certain materials are rubbed together, a phenomenon known as "charge" can be transferred from one surface to another. Uncharged items are pulled by charged objects, which in turn may push or pull against other charged ones.
Let q and Q represent the charges on objects 1 and 2, respectively.
Charge Q is separated from charge q by a distance r, and their electrostatic attraction is given by:
F = kqQ/r²
where k is Coulomb's constant
According to the question:
F = 36 units
⇒ kqQ/r² = 36 units
Now, the charge on object 2 is doubled, so it now acquires a 2Q charge.
So the new electrostatic force will be:
F' = kq(2Q)/r²
F' = 2kqQ/r²
F' = 2F = 2×36
F' = 72 units
To know more about electrostatic force visit:
https://brainly.com/question/9774180
#SPJ1
Convert 140.8 centimeters to inches.
Using one step conversions.
Answer:
140.8/2.54=55.43 inches
A 23cm hammer is used to pull a nail. If 42.5 N of force is applied to it at a 45° angle, how much torque is applied?
Answer:6.91 Nm
Explanation:
How are particles behaving in solid vs gas when it comes to sound?
Answer:
Sound waves have to travel through solids, gases, and liquids. Sound waves vibrate through the air in matter. Molecules in solids are packed tightly. This allows sound to travel faster through a solid than gas.
What are three common fossil fuels?
A. coal, oil, natural gas
B. iron, lead, carbon
C. coal, gold, silver
D. solar, wind, water
Answer:
A. coal, oil, natural gas
Explanation:
this is because those three are related to fossil fuels.
Answer:
A:Coal,Oil,Natural gas
Explanation:
that pfp tho
Two 8.0 Ω lightbulbs are connected in a 12 V parallel circuit. What is the power of both glowing bulbs?
Answer:
96w
Explanation:
p=Iv..where v=12 and I=8.0
Newtons 1st law
What is the resistance to this unbalanced force in football?
Answer:
Newton's first law of motion states that an object's motion will not change unless an unbalanced force acts on the object. ... The football player in the photo above is in motion. He will stay in motion unless players on the other team exert an unbalanced force against him.
Explanation:
https://flexbooks.ck12.org/cbook/ck-12-middle-school-physical-science-flexbook-2.0/section/1.4/related/rwa/football-physics/
LINK
5. In an open system, for maximum work, the process must be entirely
a) irreversible
b) reversible
c) adiabatic
d) none of the mentioned
7. Which of the following is true for a closed system?
a) mass entering = mass leaving
b) mass does not enter or leave the system
c) mass entering can be more or less than the mass leaving
d) none of the mentioned
13. A piston cylinder contains 0.5 kg of air at 500 kPa and 500 K. The air expands in a
process so pressure is linearly decreasing with volume to a final state of 100 kPa and 300
K. Find the work in the process.
a) 56.1 kJ
b) 66.1 kJ
c) 76.1 kJ
d) 86.1 kJ
5- И
Land 279 At this state the
there is a metal ball and ring set that is specially made so that at room temperature at the ball fits through the ring However when the ball is heated it gets stuck and cannot fit through anymore .why
Answer: Most objects expand when they take in heat for example get a metal sphere and put it next to a blow torch it would expand just enough to not fit in the ring anymore, but when it cools down it will go back to its original size releasing the energy
Explanation:
A 0.17 kg ball on a 0.70 m string rotates in a circular path in a vertical plane. If the angular speed of the ball at the bottom of the circle is 7.0 rad/s, what is the force that maintains circular motion?
A. 5.6 N
B. 7.5 N
C. 1.7 N
D. 1.2 N
which of the following is an example of noncontact force?
A. Pitcher throws the ball
B. the bat hits the ball
C. the ball falls from the sky
D. the runner gets tagged out
While hammering a nail, you put in 30 Joules of work. The hammer then puts out 10 J of
work on the nail. What is that hammer's efficiency?
A. 300%
B. 40%
С. 33%
D. 33 J
Answer:
C Don't worry if you thought it was D. I almost answered that.
Explanation:
Remark
You can get this just by learning the vocabulary.
Efficiency = Work Out / Work In * 100%
Work in = 30J That's you swinging the hammer.
Work out = 10 J That's how much of the hammer's work gets to the nail.
Efficiency = (10/30)*100
Efficiency = 1/3 * 100
Efficiency = 33%
Answer:
I think its 40%, pls correct me if I am wrong :(
Explanation:
A car has 3600 J of kinetic energy and is going 3 m/sec. What is its mass?
At which location does a skateboarder have the most kinetic energy at least potential energy?
Answer:The skater has the lowest amount of kinetic energy at the top of the track and lowest potential energy at the lowest point of the track. Kinetic energy is the speed a object is going, and potential energy is the energy a object has when its not moving. While the skater moves up the ramp the potential energy increases, and the kinetic energy decreases because it slows down while moving up the ramp. Hope this helps have a nice day ❤️
Explanation:
First recognize that the total energy of the skater is conserved: this means that the total energy of the skater is constant. The total energy (E) consists of the kinetic energy (KE) and gravitational potential energy (Ug).
E=KE+Ug
Now we know that the gravitational potential energy depends on the distance from the zero of potential (or in simpler terms: how high the skater is from the ground). Now, we are ready to answer the question.
The skater possesses the most KE at point B: remember total energy is a constant and at point B the skater has the least amount of potential energy (since they are at their lowest point above the ground). This means that the skater must have more kinetic energy at point B.
Similarly, at points A and C, the skater possesses the most potential energy since they are at their highest point above the ground.
As the skateboarder moves then it will have the maximum kinetic energy at the lower most portion of the track and will have the zero potential energy at the same point and at the maximum height of the track the skater will have maximum potential energy and zero kinetic energy.
What will be the KE and PE of the skater at maximum and minimum positions of the track?As the skater moves on the track his kinetic and potential energy converts into each other but the total energy remains constant.
Total Energy = KE+PE
At maximum height the kinetic energy will totally convert into the potential energy and becomes zero.and the potential energy becomes maximum at this point.
At Max height (Total energy=Max Potential energy) KE=0
Similarly at the lower most portion of the track the Potential energy completely convert into the kinetic energy and becomes zero. And kinetic energy becomes max at this point.
At lower point (Total energy= Max Kinetic Energy) PE=0
Thus the skater will have the most kinetic energy at the lower most point of the track and least potential energy at the same point.
To know more about energy follow
https://brainly.com/question/1634438
Question 17 of 25
Which term describes the transfer of energy from a hot object to a cooler
one?
A. Pressure
B. Density
C. Temperature
D. Heat
Answer:
D
Explanation:
heat is an energy that transfers from a hot body to cold body
D. Heat
What is heat?Heat is the transfer of kinetic energy from one medium or object to another, or from an energy source to a medium or object.
Such energy transfer can occur in three ways: radiation, conduction, and convection.
As heat is a form of energy, and therefore the SI unit of heat is also joules (J) which are defined as the amount of energy needed to raise the temperature of a given mass by one degree.
Heat is the transfer of energy from a warmer object to a cooler object.
For example, a lighted match (higher temperature object) will transfer heat to a large pan filled with lukewarm water (lower temperature object).
Therefore,
The term describes the transfer of energy from a hot object to a cooler one is Heat.
Learn more about heat here:https://brainly.com/question/13860901
#SPJ2
Why do other stars look much dimmer than the sun?
A body of mass 11 kg is subjected to a net force of 20 N East for 30 s. Calculate the change in
velocity of the body.
Answer:
54.55 m/s
Explanation:
From the question above,
Change in velocity = impulse/mass
Δv = I/m = Ft/m................... Equation 1
Where F = force, t = time, m = mass
Given: F = 20 N, t = 30 s, m = 11 kg
Substitute these values into equation 1
Δv = (20×30)/11
Δv = 600/11
Δv = 54.55 m/s
Hence the change in velocity of the body is 54.55 m/s
The change in velocity of the body is 54.54 m/s
The velocity of the body of an object is the change of the distance of the object with time.
From the information given:
the mass of the b0dy = 11 kg
the net force F = 20 N
the time (t) = 20 s
Similarly;
Force = ma
20 = 11 × (a)
[tex]\mathbf{a = \dfrac{20}{11} \ m/s^2}[/tex]
a = 1.818 m/s²
However, the acceleration of an object is the change in velocity with time.
[tex]\mathbf{a = \dfrac{\Delta V}{t}}[/tex]
ΔV = (a) × (t)
ΔV = 1.818 m/s² × 30 s
ΔV = 54.54 m/s
Learn more about the velocity of an object here:
https://brainly.com/question/626479
Physics Help ASAP Please!
Answer:
23N
Explanation:
Answer:
9.3N
Explanation:
Fgrav = m • g = 14.7 N (g is 9.8 m/s/s)
a = v2 / R = (4 • Fgrav)/1 = 16 m/s/s
Fnet = m • a = 1.5 kg •16 m/s/s = 24 N, down
Fnet = Fgrav + Ftens, so
Ftens = Fnet - Fgrav
Ftens = 24 N - 14.7 N = 9.3 N
16. An object with a mass of 20.0 kg has a force of 5.0 newtons applied to it. What is the resulting acceleration of the object?
Answer:
0.25m/s^2
Explanation:
F = ma
a = F/m
(Newton's Second Law)