Answer:
The change that has to take place inside the power cord in order for the device to function properly include;
The changing of the alternating current (AC) from the electrical outlet to the direct current having a specific voltage and current value with which the device can be powered
Explanation:
A battery powered device makes use of direct current (DC) electric power from a battery, while the power normally given out at an electrical outlet comes as an alternating current (AC) electric power source.
The power cord for battery-powered device, also known as an AC/DC adapter, that allows them to be plugged into electrical outlets converts the AC electric current it obtains from the electrical outlets to DC electrical current of the appropriate voltage and amperage that the device can make use of for electric power to function and for charging the battery which is the power source for the device
Therefore, the change that has to take place in the power cord is the conversion of the electric outlet alternating current (AC) voltage and amperage values, into direct current (DC) of the required voltage and current for the device
Question 2
What measurements are needed to calculate your BMI?
A. Weight and shoe size
B. Height and weight
C. heart and breathing rate per minute
D. core temperature and height
Answer:
B
Explanation:
formula of average speed
Answer:
Hey mate....
Explanation:
This is ur answer.....
Hope it helps!
Mark me brainliest....
FOLLOW ME!!! :)
How do you find component velocities of parallel vectors?
Answer:
Velocity is a vector (it has magnitude and direction), so the overall velocity of an object can be found with vector addition of the x and y components: v2 = vx2 + vy2. The units to express the horizontal and vertical distances are meters (m).
3. How does the wavelength of green different from violet-indigo?
Answer:
As the full spectrum of visible light travels through a prism, the wavelengths separate into the colors of the rainbow because each color is a different wavelength. Violet has the shortest wavelength, at around 380 nanometers, and red has the longest wavelength, at around 700 nanometers.
Explanation:
DO NOW: You are picking up a pendulum (Clay ball on a string) as you pull the pendulum up on one side and let it fall, what types of energy are being used?
Answer:
The energy used in the pendulum is the initial Potential (Mechanical) Energy, P.E. given to the Clay ball attached to the inclined and extended string by virtue of its elevated position in relation to the rest position (lower state)
The swinging of the pendulum is brought about by the dynamic equilibrium between the initial potential energy, P.E. and the Kinetic Energy, K.E., of the pendulum when it is in motion
The (total) Mechanical Energy, M.E. of the ideal pendulum is constant at all times during the motion of the pendulum and it is given by the following formula;
M.E. = P.E. + K.E.
At the top of the swing, P.E. is maximum and K.E. is zero
Similarly, at the mid (lowest) point in the swing, instantaneously, P.E. is zero and K.E. is maximum
Explanation:
Which would increase the speed of a sound wave?
Answer:
I would say temperature
One of the solid reactants was treated in a coffee grinder before adding to
the reaction container. *
O
A. Concentration
B. Temperature
C. Surface Area
D. Catalyst
E. Agitation
Answer:
C. Surface area
Explanation:
The rate of chemical reaction depends on various factors such as:
concentration and pressurenature of reactantstemperaturesurface areapresence of catalyst, etc.Effect of surface area of reactants: the rate of a chemical reaction can be increased by increasing the the area of contact of the reacting substances. This is especially important when one or more of the reactants are solids., because only the particles of the solid that are exposed are able to take part in the reaction at each instant of time. Therefore, the greater the surface area of the solid reactant particles the faster the reaction.
The surface area of solid reactants can be increased by grinding or pelletizing, thus allowing for a greater contact between the reacting particles,
The instance in which one of the solid reactants was treated in a coffee grinder before adding to the reaction container is one way of increasing the surface area of a reactant.
does anybody have social media and could help me with my homework ? i will send you pictures of my work please all of my work is due tomorrow!! i need help
Water uptake to the atmosphere occurs through the processes of evaporation and transpiration from plants where it condenses to form clouds. Clouds release the water through precipitation. During a summer of extreme drought, what can we expect to happen to the surface groundwater stored in ponds and lakes?
a. Water levels will increase because there is more precipitation
b. Animals won't drink as much to save water, so water levels remain the same
c. Water levels will increase because there are more evaporation and transpiration
d. Water levels will decrease because there are more evaporation and transpiration
water level will decrease because there are more evaporation and transpiration
two children of masses m1 = m2 = 20 kg , ride on the perimeter of a small merry-go- round . the merry -go-round us a disk of mass M = 30 kg answer
Answer:
c
Explanation:
A centrifuge used in DNA extraction spins at a maximum rate of 7000rpm producing a "g-force" on the sample that is 6000 times the force of gravity. If the centrifuge takes 10 seconds to come to rest from the maximum spin rate: a) What is the angular acceleration of the centrifuge? b)what is the angular displacement of the centrifuge during this time
Answer:
A) a = 73.304 rad/s²
B) Δθ = 3665.2 rad
Explanation:
A) From Newton's first equation of motion, we can say that;
a = (ω - ω_o)/t. We are given that the centrifuge spins at a maximum rate of 7000rpm.
Let's convert to rad/s = 7000 × 2π/60 = 733.04 rad/s
Thus change in angular velocity = (ω - ω_o) = 733.04 - 0 = 733.04 rad/s
We are given; t = 10 s
Thus;
a = 733.04/10
a = 73.304 rad/s²
B) From Newton's third equation of motion, we can say that;
ω² = ω_o² + 2aΔθ
Where Δθ is angular displacement
Making Δθ the subject;
Δθ = (ω² - ω_o²)/2a
At this point, ω = 0 rad/s while ω_o = 733.04 rad/s
Thus;
Δθ = (0² - 733.04²)/(2 × 73.304)
Δθ = -537347.6416/146.608
Δθ = - 3665.2 rad
We will take the absolute value.
Thus, Δθ = 3665.2 rad
If C is the vector sum of A and B, C = A + B, What must be true if C = A + B?. What must be true if C = 0?.
An egg sinks in fresh water but floats on concentrated salt solution
the salt solution exerts a greater up thrust on the egg which balances the weight of the egg, so the egg floats in a strong salt solution but sinks in fresh water
A force of 1000 N is exerted on a golf ball for 0.005 s. The change in momentum of the golf ball is - a 200,000 kg m//s b 50 kg m//s c 5,000 kg m//s d 5 kg m//s
Answer:
d) 5 Ns
Explanation:
Impulse = Ft = 1,000(0.005) = 5
2. How does laser light differ from
normal light?
Answer:
Laser light differs from normal light because laser lights are monochromatic which means it only shines one color and only that color :3
Explanation:
:3
You ride your bike 5 miles east to school, then 2 miles east to Wawa, return to school, then ride 2 miles west to the library to work on your homework. What is your displacement?
Answer:
3 miles
Explanation:
5 + 2 - 2 - 2 = 3 miles
what is specific heat capacity?
Specific heat capacity is defined as the amount of heat required to raise the temperature of 1 kilogram of a substance by 1 kelvin (SI unit of specific heat capacity J kg−1 K−1). From: Basic Physics and Measurement in Anaesthesia (Fourth Edition), 1995.
An ant walks 15 m east, then 40 m north, and finally 20 m west. What is the total displacement from the starting point
Answer: 40.311 m
Explanation:
Given
Ant walks 15 m east
then 40 m North and finally 20 m west
from the figure, ant is 40 m North and 5 m west
Using Pythagoras, we can write
[tex]\Rightarrow d=\sqrt{40^2+5^2}\\\Rightarrow d=\sqrt{1625}=40.311\ m[/tex]
Select the correct answer from each drop-down menu.
Photosynthesis is a process in which plants prepare food using carbon dioxide, chlorophyll, and water in the presence of sunlight.
During photosynthesis,(blank)
energy is transformed into(blank)
1.Chemical,electrical,kinetic, Solar ?
2.Chemical, Electrical, Kinetic, Solar
Answer:
During photosynthesis solar energy is converted into chemical energy
Explanation:
During photosynthesis solar energy is converted into chemical energy in the form of energy rich bond of ATP molecule.
ATP (Adenosine triphosphate) and ADP (Adenosine diphosphate) molecules are termed currency of energy. ADP molecule is converted into ATP molecules, whenever energy is available in certain exothermic reactions of metabolism.
ATP molecules are store- house of energy. ATP molecule is broken down into ADP molecule in presence of enzyme ATPase, releasing energy whenever energy is required.
The synthesis of ATP molecules, utilizing solar energy during photosynthesis, is termed photo-phosphorylation.
These ATP molecules produced during light reaction of photosynthesis are utilized in dark reaction of photosynthesis (Calvin cycle).
ATP molecules synthesized during photo-phosphorylation may also be used in other metabolic reactions.
Photo-phosphorylation is of 2 types, i.e. Cyclic and Non-cyclic photo-phosphorylation.
Chlorophyll molecules entrap solar energy . There are 2 types of photo-systems in chlorophyll. These are photo-system -I and photo-system-II .
The electrons of chlorophyll molecule of photo-system I get excited which pass through series of electron carriers in electron transport system arranged in the order of decreasing energy level.
During the passage of electrons from carriers of higher energy level to the carriers of lower energy level, the energy is lost which is utilized for converting ADP molecule into ATP molecule.
Photo-system I is concerned with light reaction of photosynthesis only, constituting cyclic photo-phosphorylation.
The electron transport during Photo-system II results in the synthesis of NADPH2 in presence of enzyme NADP reductase. NADPH2 is used in reduction reaction of Calvin cycle.
Both Photo-systems participate in non-cyclic photo-phosphorylation that results in the synthesis of NADPH2 in addition to the synthesis of ATP molecules.
what is called the phenomenon of prolongation of sound
Answer:
It is called reverberation.
Explanation:
The phenomenon of prolongation of sound is the process in which sound produced is reflected from plane surfaces in a continuous manner, which leads to reverberation of sound waves. It can also be referred to as a condition of continuous echo production.
It occurs when sound produced get reflected from a hard plane surface, and in the process hits another surface and another reflection occurs. This continuous reflection leads to prolongation of sound.
The sound produced is heard for some specific period of time before it dies down or get absorbed finally.
What is the momentum of a 4000g object moving to the left (negative direction) at 25 m/s?
Answer:
-100 kg · m/s
Explanation:
We can find the momentum of an object using the formula:
p = mv where p = momentum (kg * m/s), m = mass (kg), v = velocity (m/s), and p and v are vectorsLet's start by converting the mass of the object to kilograms.
4000 g → 4 kgSince the left direction is the negative direction, we know that the velocity of the object is -25 m/s.
Using these variables, we can solve for p in the formula.
p = mv p = (4 kg)(-25 m/s) p = -100 kg · m/sThe momentum of the object is -100 kg · m/s.
objects through which light can pass are referred to as dash objects
Answer:
Those objects are called transparent objects...
Explanation:
If only some light can pass through them ,it is called translucent....
If no light can pass through them ,it is called opaque.
Answer:
hii good morning
hey i am not good player but i wanted to give a triel to play duo in ff
A force of 100N stretches an elastic string to a total length of 20cm. if an additional force of 100N stretches the spring 5 cm further, find the natural length of the spring if the elastic limit is not exceeded. Pls help ASAP
Answer:
8cm
Explanation:
The general formula to find this is F/X where in this case the f is the total of the two forces (100+100) and x is the sum of the length ( 20+5) which together comes 200&25respectively then divide 200 with 25 which comes 8cm.
3. Determine the units of the quantity described by the following com-
binations of units:
a. kg (m/s) (1/s)
b. (kg/s) (m/s2)
c. (kg/s) (m/s)
d. (kg/s) (m/s)
M= 1000 g g= 10 m/s2 h= 10 K.E at GROUND = 400 j M.E = ....... ........J the answer is 400 so plz explain how
Answer:
M = 500 J
Explanation:
Given that,
Mass, M = 1000 g = 1 kg
Height, h = 10 m
Potential energy is given by :
P = mgh
P = 1×10×10
P = 100 J
The kinetic energy at ground = 400 J
Mechanical energy = sum of kinetic and potential energy
So,
M = 100 + 400
M = 500 J
So, the mechanical energy of the system is 500 J.
A tractor pulls a 978 kg wagon at a velocity of 4.9 m/s. How many watts of power are exerted by the tractor motor is the tractor pulls the wagon at a 60 degree angle?
Answer:
23481.78 W
Explanation:
The computation of number of watts of power is shown below:
M = 978 kg
V = 4.9 m/s
Theeta = 60°
As we know that
P = Fcos(theeta).V
F = Mg
P = (Mg)cos(theeta).V
P = 978×9.8×cos(60)×4.9
P = 23481.78 W
A potato is which part of the plant?
root
stem
leaf
flower
Why are temperatures of the currents generally colder at the poles than the equator?
A. Tilt of the Earth on its axis
B. Angle of the sun's rays are less direct
C. Angle of the sun's rays are more direct
D. The Earth's revolution around the sun.
Answer:
the answer is A
Explanation:
Pls helppp. Is this right?
Answer:
yes you are totally right
What are the mechanical advantage and mechanical efficiency of a lever that requires an input force of 40 N and lifts and lifts a boulder that weighs 80 N?
Answer:
2 , 200%
Explanation:
Mechanical advantage of a machine is defined as how much the machine multiplies the applied force.
It is given that :
Input force of the lever = 40 N
The weight of the boulder or the output force = 80 N
Therefore, the mechanical advantage = output force / input force
[tex]$=\frac{80}{40}$[/tex]
= 2
Mechanical efficiency is obtained by the dividing the output by the input and multiplying it with 100.
i.e. Efficiency = output / input x 100
[tex]$=\frac{80}{40}\times 100$[/tex]
= 200 %