Answer:
65.682%
Explanation:
The computation of the percentage is shown below;
But before that first determine the present value i.e.
Given that
Future value = $1,000
PMT = $1,000 × 6% ÷ 2 = $30
RTAE = 10% ÷ 2 = 5%
NPER = 20 × 2= 40
the formula is shown below;
= -PV(RATE,NPER,PMT,FV,TYPE)
After applying the above formula, the present value is $656.82
Now the percentage is
= $656.82 ÷ $1,000
= 65.682%
You sold two EUR futures contract at the closing price on 3/01. Each EUR futures contract requires the delivery of EUR125,000. Suppose, the initial and maintenance margin for each EUR futures contract are $1,500 and $1,000, respectively. Assume that you do not withdraw from your margin account during this period, but that you do meet your margin calls if you get any
Date 3/01 3/02 3/03 3/04
EUR Spot Price $1.3579 $1.3527 $1.3588 $1.3580
July EUR Futures Contract Price $1.3750 $1.3782 $1.3827 $1.3713
The profit / loss posted to your account at the close of 3/02 is ______
Answer:
What
Explanation:
Suppose that in your first year of college you spend $31,300.00 more than you eam. In your second year, your expenses increase a bit, leading you to spend $31.900.00 more than you earn. This gap goes to $32.150.00 in your third year of college, then falls a bit to $32,150.00 in your fourth and final year ist attempt What is your deficit in your third year of college? s s How much debt do you have that year? S
Answer: See explanation
Explanation:
Based on the information provided in the question, the deficit in the 3rd year of college will be: = $32,150
The total debt that one owes in the 3rf year will then be the addition of the debts from the 1st to the 3rd year and this will be:
= $31,300 + $31,900 + $32,150
= $63,232
Answer:
1. $32,150
2. $95,350
Explanation:
The deficit in the third year is given in the introduction: $32,150
The deficit measures how expenditures in a given year match up with earnings, whereas the debt is the total accumulation of deficits.
The debt after your third year is the sum of the deficits from your first three years: $31,300 + $31,900 + $32,150 = $95,350
The Laramie Factory produces expensive boots. It has two departments that process all the items. During January, the beginning work in process in the tanning department was 40% complete as to conversion and 100% complete as to direct materials. The beginning inventory included $6,000 for materials and $18,000 for conversion costs. Ending work-in-process inventory in the tanning department was 40% complete. Direct materials are added at the beginning of the process. Beginning work in process in the finishing department was 60% complete as to conversion. Beginning inventories included $7,000 for transferred-in costs and $10,000 for conversion costs. Ending inventory was 30% complete. Additional information about the two departments follows: Tanning Finishing Beginning work-in-process units 5,000 4,000 Units started this period 14,000 ? Units transferred this period 16,000 18,000 Ending work-in-process units ? 2,000 Material costs added $18,000 ? Conversion costs 32,000 $19,000 Transferred-out cost 50,000 ?
Required: Prepare a production cost worksheet using weighted-average costing for the finishing department.
Answer:
The Laramie Factory
Finishing Department
Production Cost Worksheet, using weighted-average costing
Cost assigned to: Materials Conversion Total
Units transferred out $66,348 $28,062 $94,410
Ending work in process 7,372 935 8,307
Total cost accounted for $73,720 $28,997 $102,717
Explanation:
a) Data and Calculations:
Materials Conversion
Tanning Finishing Tanning Finishing
Beginning work in process 100% 100% 40% 60%
Cost of beginning WIP $6,000 $7,000 $18,000 $10,000
Ending work in process 100% 100% 40% 30%
Additional information:
Tanning Finishing
Beginning work-in-process units 5,000 4,000
Units started this period 14,000 16,000
Units transferred out this period 16,000 18,000
Ending work-in-process units 3,000 2,000
Materials Conversion
Tanning Finishing Tanning Finishing
Beginning work in process 100% 100% 40% 60%
Beginning work in process done this period 60% 40%
Ending work in process 100% 100% 40% 30%
Cost of beginning WIP $6,000 $7,000 $18,000 $10,000
Costs added 18,000 $66,720 32,000 19,000
Total costs of production $24,000 $73,720 $50,000 $29,000
Transferred-out cost
Equivalent units
Materials Conversion
Tanning Finishing Tanning Finishing
Units started and completed 16,000 18,000 16,000 18,000
Ending work-in-process units 3,000 2,000 1,200 600
Equivalent units of production 19,000 20,000 17,200 18,600
Cost per equivalent units Materials Conversion
Tanning Finishing Tanning Finishing
Total cost of production $24,000 $73,720 $50,000 $29,000
Equivalent units of production 19,000 20,000 17,200 18,600
Cost per equivalent unit $1.263 $3.686 $2.907 $1.559
Tanning Department
Cost assigned to: Materials Conversion Total
Units transferred out $20,208 $46,512 $66,720
Ending work in process 3,789 3,488 7,277
Total costs $23,997 $50,000 $73,997
Finishing Department
Cost assigned to: Materials Conversion Total
Units transferred out $66,348 $28,062 $94,410
Ending work in process 7,372 935 8,307
Total cost accounted for $73,720 $28,997 $102,717
How have you practiced initiative and results driven skills in your own life
Answer:
when i see others struggling i reach out and offer help. When i see areas where your life is not going as well as you would like to and i decide to do something about it.
Explanation:
Describe the life cycle of a product and explain profitability and sales volume at each stage
Answer:
Product Life Cycle: Overview
The product life cycle (PLC) describes a product's life in the market with respect to business/commercial costs and sales measures. It proceeds through multiple phases, involves many professional disciplines and requires many skills, tools and processes.
This is not to say that product lives cannot be extended – there are many good examples of this – but rather, each product has a ‘natural’ life through which it is expected to pass.
The stages of the product life cycle are:
Introduction
Growth
Maturity
Decline
PLC management makes these three assumptions:
Products have a limited life and, thus, every product has a life cycle.
Product sales pass through distinct stages, each of which poses different challenges, problems and opportunities to its parent company.
Products will have different marketing, financing, manufacturing, purchasing and human resource requirements at the various stages of its life cycle.
The product life cycle begins with the introduction stage (see ). Just because a product successfully completes the launch stage and starts its life cycle, the company cannot take its success for granted.
image
Product Development and Product Life Cycle: The Product Life Cycle follows directly after new product development.
A company must succeed at both developing new products and managing them in the face of changing tastes, technologies and competition. A good product manager should find new products to replace those that are in the declining stage of their life cycles; learning how to manage products optimally as they move from one stage to the next.
Product Lifecycle Management Stage 1: Market Introduction
This stage is characterized by a low growth rate of sales as the product is newly launched and consumers may not know much about it. Traditionally, a company usually incurs losses rather than profits during this phase. Especially if the product is new on the market, users may not be aware of its true potential, necessitating widespread information and advertising campaigns through various media.
However, this stage also offers its share of opportunities. For example, there may be less competition. In some instances, a monopoly may be created if the product proves very effective and is in great demand.
Characteristics of the introduction stage are:
High costs due to initial marketing, advertising, distribution and so on.
Sales volumes are low, increasing slowly
There may be little to no competition
Demand must be created through promotion and awareness campaigns
Customers must be prompted to try the product.
Little or no profit is made owing to high costs and low sales volumes
Growth
During the growth stage, the public becomes more aware of the product; as sales and revenues start to increase, profits begin to accrue.
Explanation:
Quelle è il articolo che parla dalla ugualianza
Suppose the Digby company shifts focus to only competing in the Thrift and Nano segments, while competing on price by reducing costs and passing the savings to the customers, what strategy would they be implementing
Answer:
Niche cost leader strategy
Explanation:
In simple words, A niche cost pioneer or leader aims to exploit consumer markets that are price responsive. Its objective is to undercut all rivals' costs while remaining sustainable. Under this business strategy, the producer try to create a strong customer base by offering lower prices as it is the best motivation for the customer to try a specific product.
Thus, from the above we can conclude that the correct answer is niche cost leader.
In a closed economy, saving and investment must be equal, but this is not the case in an open economy. In the following problem, you will explore how saving and investment are connected to the international flow of capital and goods in an economy. Before delving into the relationship between these various components of an economy, you will be asked to recall some relationships between aggregate variables that will be useful in your analysis.
Recall the components that makeup GDP. National income (Y) equals total expenditure on the economy's output of goods and services. Thus, where C= consumption, I= investment, G =government purchases, X=exports, M =imports, and NX= net exports.
Y= _____
Also, national saving is the income of the nation that is left after paying for _____. Therefore, national saving (S) equals:
S=_____
Rearranging the previous equation and solving for Y yields, Y= _____ Plugging this into the original equation showing the various components of GDP results in the following relationship:
S=_____
Answer:
Y = C + I + G + NX
S = Y - C
S = I + G + NX
Explanation:
National Income Y = C + I + G + NX ; {where consumption, investment, government purchases, net exports ie exports - imports are corresponding expenditure of households, firms, government, rest of the world}
National Saving (S) is income (Y) left after paying for consumption (C) . So, S = Y - C
Using above equations, Y = C + S , Y = C + I + G + NX
C + S = C + I + G + NX
So, S = I + G + NX
he revenue cycle's primary objective is to Group of answer choices lower expenses. provide the right product in the right place at the right time for the right price. provide quality product in order to maximize market share. maximize the company's profit.
Answer: provide the right product in the right place at the right time for the right price.
Explanation:
Revenue cycle refers to the process involving the completion of an accounting process from the sale of a product till receipts are gotten for payment made.
The primary objective of the revenue cycle is to provide the right product in the right place at the right time for the right price.
Assume that, on January 1, 2021, Matsui Co. paid $2,958,000 for its investment in 87,000 shares of Yankee Inc. Further, assume that Yankee has 290,000 total shares of stock issued. The book value and fair value of Yankee's identifiable net assets were both $580,000 at January 1, 2021. The following information pertains to Yankee during 2021:
Net income $290,000
Dividends declared and paid $87,000
Market price of common stock on 12/31/2021 $36 /share
Required:
What amount would Matsui report in its year-end 2021 balance sheet for its investment in Yankee?
Answer: $3,018,900
Explanation:
Amount to report is:
= Cost of investment + Share of Net income - Share of dividends
Share of Net income
= Percentage ownership * Net income
= 87,000 shares / 290,000 * 290,000
= $87,000
Share of Dividends
= 87,000 / 290,000 * 87,000
= $26,100
Amount to report:
= 2,958,000 + 87,000 - 26,100
= $3,018,900
Penny Arcades, Inc., is trying to decide between the following two alternatives to finance its new $28 million gaming center: a. Issue $28 million of 6% bonds at face amount. b. Issue 1 million shares of common stock for $28 per share. 2. Which alternative results in the highest earnings per share
Answer:
Penny Arcades, |nc.
a. Issue $28 million of 6% bonds at face amount.
Explanation:
Alternative A will surely result in higher earnings per share than Alternative B. It has been established that some financial leverage enables the stockholders to earn more per share. This is not a debatable issue. The hard work lies with the corporation's ability to find the debtholders that can finance its activities and assets. This means that the stockholders of Penny Arcades, Inc. will be at a much more financial advantage if they can find creditors to lend it the $28 million for the gaming center than making the finance available themselves.
market:blue Jean market . event :the dye in blue jeans is proven not fade easily .Name the market
DontBuyFromUs
In 2019, Henry Jones (Social Security number 123-45-6789) works as a freelance driver, finding customers using various platforms like Uber and Grubhub. He is single and has no other sources of income. In 2019, Henry's qualified business income from driving is $61,200. Assume Henry takes the standard deduction of $12,200. Click here to access the 2019 individual tax rate schedule to use for this problem. Assume the QBI amount is net of the self-employment tax deduction.
Required:
a. Compute Henrys QBI deduction and his tax liability for 2019.
b. Complete Henry's 2019 Form 8995 (Qualified Business Income Deduction Simplified Computation).
Answer:
a. QBI Deduction = $9,800
Tax liability = $4,510
Explanation:
a. The BI deduction in 2019 was 20% of the qualified business income in excess of the standard deduction:
QBI deduction = (61,200 - 12,200) * 20%
= $9,800
We then use this to find the taxable income:
= Qualified business income - standard deduction - QBI deduction
= 61,200 - 12,200 - 9,800
= $39,200
Tax liability for a single person in 2019 as shown by the attached file is:
= 970 + 12% * (39,200 - 9,700)
= 970 + 3,540
= $4,510
b. Form not attached but the main item should be the taxable income which is calculated above.
A retail store has two options for discounting items to go on clearance.
1: Decrease the price of the item by 15% each week.
2: Decrease the price of the item by $5 each week. If the cost of an item is $45, write a function rule for the difference in price between the two options.
Answer:
Difference = 1.75 , Function = mod [ 0.15x - 5 ]
Explanation:
Discount case 1 = $5 {Each week} , Discount case 2 = 15% {Each week}
After 1st week , for item cost = 45
Discount in case 1 = $5 , & price = 45 - 5 = 40 Discount in case 2 = 15% of 45 = 6.75 , & price = 38.25Difference in price = 40 - 38.25 = 1.75 .It is same is difference in discount = 6.75 - 5 , ie = 1.75
Functional rule in price difference , for item with unknown price 'x' = mod [ (x - 5) - (x - 0.15x) ] = mod [ x - 5 - x + 0.15x ] = mod [ 0.15x - 5 ] , which is same as difference between discount '0.15x & 5'
difference between manager and management
Answer:
The main difference between the two is that leaders have people that follow them, while managers have people who simply work for them.
...
Capital budgeting is the process of making capital expenditure decisions. used in sell or process further decisions. of determining how much capital stock to issue. of eliminating unprofitable product lines.
Answer:
The correct answer is the first option: of making capital expenditure decisions.
Explanation:
To begin with, the term known as "Capital Budgeting", in the field of business management, refers to the method a company's manager use in order to see how profitable it is to start some new inversions or projects, therefore that the main purpose of this process is to involve the elaboration of a budget that will help the superiors of the organization to make capital expenditure decisions when they are looking for a new inversion or project to start with. It is very helpful in the situations where there is a need for evaluation of future prospects.
Petty Cash Fund Entries
Journalize the entries to record the following:
Check No. 12-375 is issued to establish a petty cash fund of $500.
The amount of cash in the petty cash fund is now $40. Check No. 12-476 is issued to replenish the fund, based on the following summary of petty cash receipts: office supplies, $212; miscellaneous selling expense, $156; miscellaneous administrative expense, $61. (Because the amount of the check to replenish the fund plus the balance in the fund do not equal $500, record the discrepancy in the cash short and over account.)
Petty Cash Fund Entries
Journalize the entries to record the following:
Check No. 12-375 is issued to establish a petty cash fund of $500.
The amount of cash in the petty cash fund is now $40. Check No. 12-476 is issued to replenish the fund, based on the following summary of petty cash receipts: office supplies, $212; miscellaneous selling expense, $156; miscellaneous administrative expense, $61. (Because the amount of the check to replenish the fund plus the balance in the fund do not equal $500, record the discrepancy in the cash short and over account.)
a. Journalize the entry to establish the petty cash fund. If an amount box does not require an entry, leave it blank.
b. Journalize the entry to replenish the petty cash fund. If an amount box does not require an entry, leave it blank.
Answer:
A. Dr Petty cash fund $500
Cr Cash $500
B. Dr Office supplies expenses $212
Dr miscellaneous selling expense $156
Dr miscellaneous administrative expense $61
Dr Cash short and over 31
Cr Petty cash fund $460
Dr Petty cash fund $460
Cr Cash $460
Explanation:
A. Preparation of the journal entry to establish the petty cash fund.
Dr Petty cash fund $500
Cr Cash $500
(To establish the petty cash fund)
B. Preparation of the journal entry to replenish the petty cash fund.
Dr Office supplies expenses $212
Dr miscellaneous selling expense $156
Dr miscellaneous administrative expense $61
Dr Cash short and over 31
($500-$212+$156+61+$40)
Cr Petty cash fund $460
($212+$156+$61+$31)
(To replenish the petty cash fund)
Dr Petty cash fund $460
($212+$156+$61+$31)
Cr Cash $460
How do I solve this? It’s a real estate question.
Firm X develops and licenses its designs to be produced by outside manufacturers. Firm Y develops and manufactures its own designs. If the total invested capital of the two firms is the same, which likely has more equity capital and why
Answer:
Firm X
Explanation:
In simple words, since the firm X is asset heavy they will have more equity capital in their accounts. On average, companies that adopt asset-light models achieve higher profits. Both provide the identical invested capital, but X has more equity wealth so it can have higher returns on investments.
Thus, from the above we can conclude that the correct answer is firm X.
Journalize the following transactions in the accounts of Zippy Interiors Company, a restaurant supply company that uses the allowance method of accounting for uncollectible receivables:
May 24 Sold merchandise on account to Old Town Cafe, $19,400. The cost of goods sold was $14,000.
Sept. 30 Received $4,100 from Old Town Cafe and wrote off the remainder owed on the sale of May 24 as uncollectible.
Dec. 7 Reinstated the account of Old Town Cafe that had been written off on September 30 and received $15,300 cash in full payment.
Answer:
Zippy Interiors Company
Journal Entries:
May 24 Debit Accounts receivable (Old Town Cafe) $19,400
Credit Sales revenue $19,400
To record the sale of goods on account.
Debit Cost of goods sold $14,000
Credit Inventory $14,000
To record the cost of goods sold.
Sept. 30 Debit Cash $4,100
Debit Allowance for Uncollectible Accounts $15,300
Credit Accounts receivable (Old Town Cafe) $19,400
To record the receipt of cash and write-off of balance as uncollectible.
Dec. 7 Debit Accounts receivable (Old Town Cafe) $15,300
Credit Allowance for Uncollectible Accounts $15,300
To revise the previously written-off uncollectible account.
Debit Cash $15,300
Credit Accounts receivable (Old Town Cafe) $15,300
To record the receipt of cash in full settlement of account.
Explanation:
a) Data and Calculations:
May 24 Accounts receivable (Old Town Cafe) $19,400 Sales revenue $19,400 Cost of goods sold $14,000 Inventory $14,000
Sept. 30 Cash $4,100 Allowance for Uncollectible Accounts $15,300 Accounts receivable (Old Town Cafe) $19,400
Dec. 7 Accounts receivable (Old Town Cafe) $15,300 Allowance for Uncollectible Accounts $15,300
Cash $15,300 Accounts receivable (Old Town Cafe) $15,300
Ahsan Company makes 60,000 units per year of a part it uses in the products it manufactures. The unit product cost of this part is computed as follows: Direct materials $12.60 Direct labor 17.20 Variable manufacturing overhead 4.10 Fixed manufacturing overhead 15.00 Unit product cost $48.90 An outside supplier has offered to sell the company all of these parts it needs for $69.70 a unit. If the company accepts this offer, the facilities now being used to make the part could be used to make more units of a product that is in high demand. The additional contribution margin on this other product would be $319,600 per year. If the part were purchased from the outside supplier, all of the direct labor cost of the part would be avoided. However, $4.30 of the fixed manufacturing overhead cost being applied to the part would continue even if the part were purchased from the outside supplier. This fixed manufacturing overhead cost would be applied to the company's remaining products. How much of the unit product cost of $48.90 is relevant in the decision of whether to make or buy the part? Multiple Choice $44.60 $17.20 $69.70
Answer:
Ahsan Company
Only $44.60 of the unit product cost of $48.90 is relevant in the decision of whether to make or buy the part.
Explanation:
a) Data and Calculations:
Annual units of parts produced = 60,000
Unit product costs:
Direct materials $12.60
Direct labor 17.20
Variable manufacturing overhead 4.10
Fixed manufacturing overhead 15.00
Unit product cost $48.90
Outside supplier's offer price per unit = $69.70
Relevant /avoidable costs:
Direct materials $12.60
Direct labor 17.20
Variable manufacturing overhead 4.10
Fixed manufacturing overhead 10.70
Unit product cost $44.60
Opportunity cost ($319,600/60,000) 5.33
Total avoidable/relevant costs/unit $49.93
why do conduction band electrons posses very high energy's.h
Just because of band gap. The forbidden energy gap keeps the conduction band at high energy by an amount to equal to band gap energy from the valence band edge. If you compare energies of electrons present in conduction band and valence band, they significantly differ by an amount equal to band gap energy. The low energy electron presents in a valence band requires an energy equal to band gap energy to excite to conduction band. Consequently, the electrons present in conduction band possess high energy compared to electrons present in valence band. At absolute zero K, the low energy states present in valence band are usually completely occupied where as the high energy states present in the conduction band are unoccupied.
Phishing:_______
a) A con executed using technology, typically targeted at acquiring sensitive information, or tricking someone into installing malicious software.
b) A term that, depending upon the context, may be applied to either, 1) someone who breaks into a computer system, or 2) a particularly clever solution.
c) When someone uncovers computer weaknesses, without exploiting them.
d) When a protester seeks to make a political point by leveraging technology tools, often via system integration, defacement, or damage.
Answer:
a)
Explanation:
Phishing is a type of deception in which an intruder disguises himself in email or other means of communication as a reputable individual or person. Attackers would normally use phishing e-mails to spread a range of malicious links or attachments. Some people will gather login credentials or victims' account details.
So as per above definition only option A seems the correct alternative among al the other option when discussing about Phishing.
A con executed using technology, typically targeted at acquiring sensitive information, or tricking someone into installing malicious software.
the preferred stock of BGE, inc. is sold at $37 and pays a divident of $5. And the net price of the secuirty after issurancee costs is estimated to be $32.93 what is the cost of preferred stock for BGE? g
Answer:
15.18%
Explanation:
Cost of preferred stock = Annual dividend/Net Proceeds
Cost of preferred stock = $5 / $32.93
Cost of preferred stock = 0.1518372305
Cost of preferred stock = 15.18%
So, the cost of preferred stock for BGE is 15.18%.
Microsoft sells two types of office software, a word processor it calls Word, and a spreadsheet it calls excel. Both can be produced at zero marginal cost. There are two types of consumers for these products, who exist in roughly equal proportions in the population: authors, who are willing to pay $120 for Word and $40 for excel, and economists who are willing to pay $50 for word and $150 for excel.
a. Ideally, Microsoft would like to charge authors more for Word and economists more for excel. Why would it be more difficult for microsoft to do this?
b. Suppose that Microsoft execs decide to sell word and Excel Seperately, what price should Microsoft set for word? (Hint: is it better to sell only to authors, or try to sell to both authors and economists?) What price should Microsoft set for excel? What will microsoft's profit be from a representative group of one author and one economist?
c. Suppose the Microsoft decides to bundle together Word and Excel in a package called Office, and not offer them individually. What price should Microsoft set for the package? Why? How much profit will Microsoft generate from a representative group of one author and one economist?
d. Does bundling allow Microsoft to generate higher profit than selling Word and Excel seperately?
Answer:
a
Explanation:
Celestial Artistry Company is developing departmental overhead rates based on direct-labor hours for its two production Department. Etching and Finishing. The Etching, Department employs 20 people and the Finishing Department employs 80 people. Each person in these two departments works 2,000hours per year. The production-related overhead costs for the Etching Department are budgeted at $200.000, and the Finishing Department costs are budgeted at $320.000. Two service departments. Maintenance and Computing directly support the two production departments. These service department, have budgeted costs of $48,000 and $250,000 respectively. The production department’s overhead rates cannot be determined until the service department’s costs are allocated. The following schedule reflects the use of the Maintenance Departments and Computing Department’s output by the various departments.
Using Department
Service Department Maintenance Computing Etching Finishing
Maintenance(maintenance hours) 0 1,000 1,000 8,000
Computing (minutes) 240,000 0 840,000 120,000
Required:
1. Use the direct method to allocate service department costs. Calculate the overhead rates per direct labor hour for the Etching Department and the Finishing Department.
2. Use the step–down method to allocate service department costs. Allocate the Computing Department’s costs first. Calculate the overhead rates per direct-labor hour for the Etching Department and the Finishing Department.
Answer:
Celestial Artistry Company
1. Allocation of Service departments costs (direct method):
Service Dept Production Dept.
Maintenance Computing Etching Finishing Total
Overheads $48,000 $250,000 $200,000 $320,000 $818,000
Maintenance (48,000) 5,333 42,667 0
Computing (250,000) 218,750 31,250 0
Total costs $0 $0 $424,083 $393,917 $818,000
Direct labor hours 40,000 160,000
Overhead rate per direct labor hour $10.602 $2.462
2. Allocation of Service departments costs (step-down method):
Service Dept Production Dept.
Maintenance Computing Etching Finishing Total
Overheads $48,000 $250,000 $200,000 $320,000 $818,000
Computing 50,000 (250,000) 175,000 25,000 0
Maintenance (98,000) 0 10,889 87,111 0
Total costs $0 $0 $385,889 $432,111 $818,000
Direct labor hours 40,000 160,000
Overhead rate per direct labor hour $9.647 $2.701
Explanation:
a) Data and Calculations:
Etching Finishing Total
Employees 20 80 100
Direct labor hours per year 2,000 2,000
(per employee)
Total direct labor hours/year 40,000 160,000 200,000
Production-related overhead $200,000 $320,000 $520,000
Service Dept Production Dept.
Maintenance Computing Etching Finishing Total
Overheads $48,000 $250,000 $200,000 $320,000 $818,000
Maintenance
(maintenance hours) 0 1,000 1,000 8,000 10,000
Computing (minutes) 240,000 0 840,000 120,000 1,200,000
Direct Allocation of Service Departments Overheads:
Maintenance Overhead:
Etching = $5,333 ($48,000 * 1,000/9,000)
Finishing = $42,667 ($48,000 * 8,000/9,000)
Computing Overhead:
Etching = $218,750 ($250,000 * 840,000/960,000)
Finishing = $31,250 ($250,000 * 120,000/960,000)
Step-down Allocation of Service Departments Overheads
Computing Overhead:
Maintenance = $50,000 ($250,00 * 240,000/1,200,000)
Etching = $175,000 ($250,00 * 840,000/1,200,000)
Finishing = $25,000 ($250,00 * 120,000/1,200,000)
Maintenance Overhead of $98,000:
Etching = $10,889 ($98,000 * 1,000/9,000)
Finishing = $87,111 ($98,000 * 8,000/9,000)
Journalize the following transactions, using the allowance method of accounting for uncollectible receivables
Mar. 17: Received $2,700 from Keith MacPhearson and wrote off the remainder owed of $6,370 as uncollectible.
Mar. 17 July 29: Reinstated the account of Keith MacPhearson and received $6,370 cash in full payment.
Answer:
Journal entry
Date Account & Explanation Debit Credit
Mar 17. Cash $2,700
Allowance for doubtful accounts $6370
Account receivable $9,070
Jul 29 Account receivable $6,370
Allowance for doubtful accounts $6,370
(To record amount reinstated)
Cash $6,370
Account receivable $6,370
(To record amount received)
A productive process approachviews operations as a separate organizational function.must provide feedback information for control of process inputs and technology.is of limited use in service organizations.disregards human and social concerns.
Answer:
The correct answer is the second option: Must provide feedback information for control of process inputs and technology.
Explanation:
To begin with, the term known as " Productive process approach" in the field of business management is refered to the method used by the companies who seeks for the constant improvement of its daily operations inside the organization. Therefore that it is necessary to say that this approach must provide feedback information of the internal processes that happen in the business regarding the inpunts and the technology used by the place so that a regular control will take place and with that every little adjustment as well in order to get better at every possible way to produce the company's product.
Perform a horizontal analysis providing both the amount and percentage change. (Round Percentage answers to 1 decimal place. Decreases should be indicated by a minus sign.)
Year
2021 2020
Cash $322,960 $880,000
Accounts receivable 702,240 280,000
Inventory 897,780 780,000
Long-term assets 3,536,680 2,380,000
Total assets $5,459,660 $4,320,000
Answer:
Find attached
Explanation:
Horizontal or trend analysis involves is a financial statement analysis technique that shows the percentage change or dollar change in a corresponding financial statement's item.
For example, the change in the fixed assets by a way of increase or decrease compared to last year's financial statements.
Formula:
change in a particular line item=(current year amount/previous year)-1
Which organization compiles data on individuals and businesses to report on their credit?
TransUnion
The Bureau of Consumer Protection
The National Credit Union Administration
Vantage Scores
Answer:
Option A
Explanation:
There are primarily three credit bureaus to which the Lenders go namely -
a) TransUnion
b) Equifax
c) Experian
These three agencies are interested in reviewing credit reports before lending any financial aid.
Hence, option A is correct
Answer:
TransUnion
Explanation: