Answer:
a item dropping
Explanation:
KE is movement and PE is height. As it's falling it gets KE and falls downward giving it more KE and less PE
Answer:
Explanation:
Trana make us pay for da answer smh
Based on the table above, which amount of a compound dissolved in 100 grams of water at the stated temperature represents a system at equilibrium?
Select one:
a. 40 g NaCl at 70 degrees Celsius
b. 20 g KClO3 at 70 degrees Celsius
c. 80 g NaNO3at 10 degrees Celsius
d. 80 g Pb(NO3)2 at 30 degrees Celsius
Answer:
C. 80g Nano3 at 10 degrees Celsius
Explanation:
I just took the test
80 g NaNO₃ at 10 degrees Celsius of a compound dissolved in 100 grams of water at the stated temperature represents a system at equilibrium. Therefore, option C is correct.
What is solubility ?The maximum quantity of a chemical that will dissolve in a given amount of solvent at a particular temperature is referred to as its solubility.
Different compounds have very varying solubilities, which is a feature of a particular solute-solvent pair.
A substance's physical and chemical characteristics affect how soluble it is. A few other factors and circumstances can also influence it. A few of these are: temperature, pressure, kind of binding, and forces between the particles.
A system is said to be in equilibrium when 80 grammes of a substance, dissolved in 100 grams of water at 10 degrees Celsius.
Thus, option C is correct.
To learn more about the solubility, follow the link;
https://brainly.com/question/28170449
#SPJ2
What do plants need in order to make food?
A. water, energy, oxygen
B.carbon dioxide, energy, oxygen
C.water, energy, carbon dioxide
D.water, oxygen, carbon dioxide
Answer:
Water, solar energy, carbon dioxide
Explanation:
A typical tincture of iodine contains about 2.0% iodine by mass. Calculate
the mass of iodine in a 500. g tincture.
Explain why is ortho nitrophenol more acidic than ortho methoxyphenol
Answer:
Ortho nitrophenol is more acidic than ortho-methoxyphenol.
Reason:
This is because the nitro-group is an electron-withdrawing group. In the case of ortho methoxyphenol; methoxy group is an electron-releasing group. Thus, it increases the electron density in the O−H bond and hence, the proton cannot be given out easily.
Hope this helps you. Do mark me as brainliest.
What is the molecular formula for C5H7 if its molar mass is 536 g/mol?
Answer:
(C5H7)8
Explanation:
It's empirical formula is given as; C5H7
Molar mass of carbon(C) = 12 g/mol
Molar mass of hydrogen(H) = 1 g/mol
We are told that it's molar mass is 536 g/mol.
To find the molecular formula;
Molecular formula = n × empirical formula
Thus;
n = 536/((12 × 5) + (1 × 7))
n = 8
Thus;
Molecular formula = (C5H7)8
Explain why hydrocarbons are present in so many different compounds.
Answer:
Many hydrocarbons are found in plants, animals, and their fossils; other hydrocarbons have been prepared in the laboratory. We use hydrocarbons every day, mainly as fuels, such as natural gas, acetylene, propane, butane, and the principal components of gasoline, diesel fuel, and heating oil.
I need help pls I don’t know this kne
Answer:
C. A one (1) is assumed when there is no coefficient
Explanation:
The following chemical equation is given in the attachment:
2H2 + O2 → 2H2O
In this reaction, Hydrogen (H2) and oxygen (O2) gases are the reactants and they combine to form H2O, which is the product. It is necessary that, in accordance to the law of conservation of matter, the same number of atoms of each elements on the reactant side equates that on the product side. When this happens, the equation is said to be BALANCED.
However, to balance an equation, COEFFICIENTS are used. In this equation above, coefficients 2 is used in front of both H2 and H2O but no coefficient is used in front of O2. This is because 1 mole of oxygen is on the reactant and product side respectively. However, one is assumed when no coefficient is written i.e. O2 means 1 mole of oxygen molecule.
Calculate the molarity for a solution containing 0.34 moles of NaNO3 dissolved in 0.5 liter of
water.
Answer:
0.68 mol/L
Explanation:
M=m/l
m is moles and l is liters
Since they gave us the values in the correct units, all we have to do it plug it in
M=0.34 mol/0.5 liters
M=0.68
This image models…
diffraction
reflection
refraction
absorption
Answer:
reflection is correct answer by my views
What are two properties that make a metal a good choice to use a wire in electronics? *
Answer:
Explanation:
The two properties that make a metal a good choice to use a wire in electronics are :
ductility conductivityStudents are completing an investigation on types of heat transfer. For one part of the investigation, they place their hand on a cool window and feel the difference in thermal energy. When they are touching the glass, what type of heat transfer are they experiencing?
a .Conduction
b. Convection
c. Radiation
Will mark brainiest!!!! Also I posted other questions
Answer:
Crash sensors measure how quickly a vehicle slows down in a frontal crash or accelerates to the side in a crash Some vehicles are equipped with a sensing system designed to detect the onset of a rollover crash Rollover crash sensors may be located in the ecu or at the center of the vehicle
The the Crash trip sensors in cars that send an electric signal to an ignitor The heat generated causes sodium azide to decompose into sodium and nitrogen gas which inflates the airbags
Explanation:
have a nice day
How many atoms of cobalt are in 4 moles of cobalt?
2 × 10²⁴ atoms Co
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
4 mol Co (Cobalt)
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
Set up: [tex]\displaystyle 4 \ mol \ Co(\frac{6.022 \cdot 10^{23} \ atoms \ Co}{1 \ mol \ Co})[/tex]Multiply/Divide: [tex]\displaystyle 2.4088 \cdot 10^{24} \ atoms \ Co[/tex]Step 4: Check
Follow sig fig rules and round. We are given 1 sig fig.
2.4088 × 10²⁴ atoms Co ≈ 2 × 10²⁴ atoms Co
Plants cannot grow too close together because their Blank______ need to spread out and absorb nutrients from the soil.
their roots need room to spread out
anyone know this? i’m having trouble...please help.
Some seawater is evaporated. The sea salt obtained is found
to be 86% sodium chloride. How much sodium chloride
could be obtained from 200 g of this salt?
Answer:
the answer is 172g
Explanation:
200 × 0.86 = 172g
A gas at 127 celsius and 10.0 L expands to 20.0 L. What is the new
temperature in kelvin? (You must convert to Kelvin before calculating
this problem
Answer:
T₂ = 800 K
Explanation:
Given that,
Initial temperature of the gas, T₁ = 127°C = 400 K
Initial volume, V₁ = 10 L
Final volume, V₂ = 20 L
We need to find the new temperature.
The volume of a gas is directly proportional to its Kelvin temperature.
Let T₂ is the new temperature. So,
[tex]\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}\\\\T_2=\dfrac{V_2T_1}{V_1}\\\\T_2=\dfrac{20\times 400}{10}\\\\T_2=800\ K[/tex]
So, the new temperature of the gas is 800 K.
Explain what a catalyst is and give an example of a transition as one.
Answer:
Catalyst, in chemistry, any substance that increases the rate of a reaction without itself being consumed.
...
Catalyst.
process catalyst
ammonia synthesis iron
sulfuric acid manufacture nitrogen(II) oxide, platinum
cracking of petroleum zeolites
What is the SI unit of time?
A.
second
B.
minute
C.
hour
D. day
Answer:
option a. second
.............
Which type of plate boundary is associated with seafloor spreading at the source of the spread: convergent, divergent, or transform?
Answer:
The answer is divergent
what is an acid containg oxygen?
Explanation:
An oxyacid, oxoacid, or ternary acid is an acid that contains oxygen. Specifically, it is a compound that contains hydrogen, oxygen, and at least one other element, with at least one hydrogen atom bonded to oxygen that can dissociate to produce the H+ cation and the anion of the acid.
Answer:
oxyacid, oxoacid
Explanation:
An oxyacid, oxoacid, or ternary acid is an acid that contains oxygen. Specifically, it is a compound that contains hydrogen, oxygen, and at least one other element, with at least one hydrogen atom bonded to oxygen that can dissociate to produce the H+ cation and the anion of the acid.
How many atoms of oxygen are in a molecule
of
glucose (C6H1206)?
Be sure to use the correct place value.
Answer:
Um... 6
Explanation:
C6H12O6
The O is oxygen and the 6 is the exact number of atoms
Oddly shaped bones like your vertebrae and pelvis? a.irregular bones c. short bones b. flat bones d. long bones
Ammonia (NH3) reacts with oxygen (O2) to produce water and nitric oxide (NO). How many grams of water are produced when 22.5 grams of oxygen are reacted?
When kci dissolved in ethanol what is the intermolecular attraction between k+ ions and ethanol molecules
Answer:
ion-dipole interaction
Explanation:
Ethanol is a polar molecule due to the presence of the polar O-H group in the molecule. This means that the molecule has a dipole moment.
The positive end of the dipole lies on hydrogen while the negative end of the dipole lies on oxygen.
When KCl is dissolved in ethanol, K^+ ions can interact with the negative end of the dipole in ethanol by ion-dipole interaction.
Why are poisons used less today than they were in the past? What factors influenced this change.
Answer:
Poisons are used less today than they were in the past because forensic scientists can easily detect many substances and toxins during an autopsy.
The main factor that influenced this change is advancements in forensic toxicology knowledge and technology.
good luck, i hope this helps :)
Explanation:
Today poisons are used less because forensic scientists now have much more equipment and have an easier time at identifying poisons like arsenic, which were not so easy to find in the past. The main factor influencing this change is the new technology and knowledge that was unavailable in the past.
How many grams are in 0.75 moles of Fe
Answer:
41.88375 g Fe
Explanation:
Using stoichiometry, we can do this problem. First, we put our given. Then we create an equation using the molar mass of Fe (found on the periodic table, which was 55.845 g Fe), and the resulting equation is:
[tex]0.75 mol Fe * \frac{55.845 g Fe}{1 mol Fe}[/tex]
The mol Fe's cancel, and leave us with:
41.88375 g Fe
Good luck.
A cup of coffee is made in the morning by pouring water ov er ground up coffee beans in a piece of paper and by collecting the brown liquid that comes through. Which techniques used
Answer: Filtration technique
Explanation:
The technique used here is called filtration.
Filtration,is a physical separation process that separates a mixture of an insoluble solid from a liquid ( acting as the solvent) by the use of a filter barrier that allows only the fluid to pass through.
In the case from the question,
As water is poured over the ground coffee, it forms a mixture of which the insoluble solid is the coffee grounds, the water is the liquid and the filter barrier is the piece of paper which allows only the brown liquid coffee to pass through as the filtrate.
how many molecules are in SO4
Answer:
there are 5 molecules in SO⁴
How moles are in 45.7g of CH3?
first find the atomic weight of CH3 which would be
atomic weight: 12.011 (3×1.008) = 36.32 g/mol
then find the moles in the given mass
36.32 ÷ 45.7 = 0.794
I HOPE I'M NOT WRONG I HAVENT DONE CHEM IN SO LONG