Answer:
D
Explanation:,
In designing an experiment there must be multiple trials. Multiple trials eliminate errors when the results are averaged.
This gives better results than when single measurements are used to determine results of experiments. The result of this experiment can be regarded as being reliable because it was well designed.
The heat of vaporization for benzaldehyde is 48.8 kJ/mol, and its normal boiling point is 451.0 K. Use this information to determine benzaldehyde’s vapor pressure (in torr) at 53.5°C. Report your answer to three significant digits.
Answer:
[tex]p_2=5.17torr[/tex]
Explanation:
Hello.
In this case, by using the Clausius-Clapeyron Equation which allows us to relate the vapor pressure, temperature and heat of vaporization as shown below:
[tex]ln(\frac{p_1}{p_2} )=\frac{\Delta _vH}{R}(\frac{1}{T_2}-\frac{1}{T_1} )[/tex]
Whereas [tex]p_1[/tex] is 760 torr due to the normal conditions. In such a way, for computing the vapor pressure of benzaldehyde at 53.5 °C (326.65 K), we proceed as shown below:
[tex]\frac{p_1}{p_2} =exp[\frac{48800J/mol}{8.314\frac{J}{mol*K}}(\frac{1}{326.65K}-\frac{1}{451.0K} )]\\\\\frac{p_1}{p_2}=147.0[/tex]
Thus, the vapor pressure at the final T is:
[tex]p_2=\frac{p_1}{147.0}=\frac{760torr}{147.0}\\ \\p_2=5.17torr[/tex]
Best regards!
Can you guys answer question 4 on new substance for Chemistry tysm
The answer is a bevasue it then becomes a chemical compound
Answer:
a
Explanation:
this would result in a compound and compounds are chemical changes so i think im right....
Which statement describes the effect of sorting and recombining genes in sexual reproduction?
Group of answer choices
offspring receive only recessive genes
offspring receive only dominant genes
offspring receive the same set of genes
offspring receive a unique combination of genes
an area of high pressure occurs when
Answer:
A high-pressure area, high, or anticyclone, is a region where the atmospheric pressure at the surface of the planet is greater than its surrounding environment. Winds within high-pressure areas flow outward from the higher pressure areas near their centers towards the lower pressure areas further from their centers.
Explanation:
Is Kool-Aid dissolved in water in element compound or mixture?
Answer:
mixture
Explanation:
Kool-Aid is a mixture of sugar, water, dye, and flavoring.
What type of wave does not need matter to carry energy?
The answer is Electromagnetic
Answer:
Electromagnetic
Explanation:
Electromagnetic waves differ from mechanical waves in that they do not require a medium to propagate. This means that electromagnetic waves can travel not only through air and solid materials, but also through the vacuum of space.
The pair of elements with the most familiar chemical properties are
A. Mg and S
B. Ca and Br
C. Mg and Ca
D. S and Ar
Answer:
C. mg and Ca
Explanation:
These chemical elements are collectively called as the Alkaline Earth Metals. Calcium and Magnesium are two of the six elements that fall into this category. The outer electronic structure of all these elements is similar due to which they all have similarity in their chemical and physical properties. They are all shiny, though fairly soft but still harder than alkali metals. Further, these are usually white or silvery coloured elements.They react with water to form hydrogen gas and metal hydroxide and with oxygen, they form oxides.
What are the factors affecting your limitations? How about possibilities?
Explanation:
My physiological make-up that governs the attributes I have and my climate, i.e. the conditions I have, are the variables influencing my limits. Biological make-up also regulates my prospects when they depend on my attributes, i.e. my ability and my environment , i.e. the conditions under which I am. This has been shown by experiments on twins, that our limits and opportunities are controlled by both genetics and environment.
1. How does thermal energy move between objects?
A. It moves from objects of lower mass to objects with higher mass
B. It moves from objects of higher mass to object with lower mass
C. It moves from objects of lower temperature to objects with higher temperature
D. It moves from objects of higher temperatures to objects with lower temperature
Answer:
D
Explanation:
Answer:
D
Explanation:
So. Radiation happens when heat moves as energy waves, called infrared waves, directly from its source to something else.... When the heat waves hits the cooler thing, they make the molecules of the cooler object speed up.
What is chemical energy? (2 points)
a
Energy that is stored or released during a chemical reaction
b
Energy that is destroyed during a physical change
c
Energy that is released during a phase change
d
Energy that is created when a substance is being burned
Answer: a
Energy that is stored or released during a chemical reaction
Explanation: a battery has chemical energy when u but in something that u can power with batteries it starts a chemical reaction.
Hope I helped :)
Explanation:
Chemical energy
Chemical energy is energy stored in the bonds of chemical compounds, like atoms and molecules. This energy is released when a chemical reaction takes place.
Usually, once chemical energy has been released from a substance, that substance is transformed into a completely new substance.
Which of the following rock will form if it is broken into sediment then emulsified over a long period of time?
Sedimentary rock
Magma rock
Metamorphic rock
Igneous rock
Now
Selec
BI
Toda
OOOOOO
How and why do ionic bonds form? Check all of the boxes that apply
lonic bonds form between metal atoms and other metal atoms.
Ionic bonds form between metal atoms and nonmetal atoms
The more electronegative atoms transfer one or more electrons to the less electronegative atom
The less electronegative atoms transfers one or more electrons to the more electronegative atom,
The metal atom forms a cation and the nonmetal atom forms an anion
The attraction between ions with the same charge forms an ionic bond,
The attraction between ions with an opposite charge forms an ionic bond.
BLO
I lo
DONE
Elo
Yous
Answer:
✔️Ionic bonds form between metal atoms and nonmetal atoms.
✔️The less electronegative atoms transfers one or more electrons to the more electronegative atom
✔️The metal atom forms a cation and the nonmetal atom forms an anion.
✔️The attraction between ions with an opposite charge forms an ionic bond.
Explanation:
Ionic bond refers to the bond formation which occurs when there is complete and permanent transfer of electrons from one metal atom to another non-metal atom. The metals, which are electropositive (less electronegative) loose their electrons while the non-metals, which are less electropositive (more electronegative) gain the electrons.
When the metal atom looses electrons, they form cations(become positively charged) while non-metal atom forms anions (become negatively charged). When the opposite charges attract each other, they form ionic bond.
Answer:
✔️ Ionic bonds form between metal atoms and nonmetal atoms.
✔️ The less electronegative atoms transfers one or more electrons to the more electronegative atom.
✔️ The metal atom forms a cation and the nonmetal atom forms an anion.
✔️ The attraction between ions with an opposite charge forms an ionic bond.
Define dynamic equilibrium.
a) no reactants react no products are formed the rate of the forward reaction
b) is faster than the rate of the reverse reaction the rate of the reverse reaction
c) is faster than the rate of the forward reaction the rate of the forward reaction
d) equals the rate of the reverse reaction
Answer:
d) The rate of forward reaction equals the rate of the reverse reaction
Explanation:
A dynamic equilibrium is attained when the rate of forward reaction is the same as reverse reaction. It occurs majorly in a reversible reaction. Thus, no change occurs in the reaction.
The process can be control by the immediate removal of the product as it is formed. This ensure that the reaction stops when all reactants are used up.
describe the structure and function of gamma rays
Answer:
A gamma ray is a penetrating form of electromagnetic radiation arising from the radioactive decay of atomic nuclei. It consists of the shortest wavelength electromagnetic waves and gives off the highest photon energy. The energy spectrum of gamma rays can be used to identify the decaying radionuclides using gamma spectroscopy.
Explanation:
Object A has a mass of 12g and a volume of 8cm3. object B has a mass of 20g and a volume of 8cm3 . which object has a greater density and by how much
Answer:
Object B has a density of 2.5 g/cm³ which is greater than object A by 1 g/cm³
Explanation:
Since we know that the formula for density is d=m/v, we can divide each mass by its corresponding volume to find the densities
12/8=1.5
20/8=2.5
So we know that object B has a greater density than object A by 1 g/cm³ (gram per cubic centimeter). Also the standard unit for density is kilograms per cubic meter but I used gram per cubic centimeter since they were the given units. 1cm=100m, 1000g=1km
You make up a solution of a diprotic acid, H2A, having pKa values of 5.0 and 9.0. Identify the primary, secondary, and tertiary species when you set the pH equal to 8.0 by addition of KOH.
Answer:
Explanation:
A solution with a pH value of 7 is neutral i.e neither acidic nor alkaline. A solution with a pH less than 7 is said to be acidic, while one with a pH value more than 7 is alkaline. Acidity increases as the value decrease below 7, while alkalinity increases as the value increase about 7.
Given that H2A is a diprotic weak acid have pKa values of 5.0 ad 9.0, it will undergo dissociation in the solution as:
NOTE: These reactions are reversible reactions.
[tex]\mathbf{H_2A \to H^+ + HA^- \ \ \ pKa = 5.0}[/tex]
[tex]\mathbf{HA^- \to H^+ +A^{2-} \ \ \ pKa = 9.0}[/tex]
Thus;
The primary species is HA⁻
The secondary species is A²⁻
Find the volume of an object that has a density 0f 3.14g/mL and a mass of 87.3g
Answer:
The answer is 27.80 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question
mass = 87.3 g
density = 3.14 g/mL
We have
[tex]volume = \frac{87.3}{3.14} \\ = 27.8025477...[/tex]
We have the final answer as
27.80 mLHope this helps you
Which main type of sedimentary rock forms from solutions?
chemical
clastic
organic
shale
Answer:
The answer is a.
Explanation:
I took the quiz and took notes.
If your questions were the same as mine the answers would be below
Question 1: Which process moves small rock pieces during sedimentary rock formation?
Answer: erosion
------------------------------------
Question 2: Which statement describes one role of minerals during cementation?
Answer: Minerals bind sediments together.
------------------------------------
Question 3: Which correctly lists three factors that contribute to weathering of rock?
Answer: ice, water, wind
------------------------------------
Question 4: The picture shows a sedimentary rock that was formed from crystalized minerals. This is the picture in text form - Orangish red rock with coarse texture.
Actual question number 4: Which type of sedimentary rock is shown?
Answer: chemical
------------------------------------
Question 5: Which type of sedimentary rock forms from weathered sediment?
Answer: clastic
------------------------------------
Question 6: Which statement describes deposition?
Answer: Deposition happens after weathering and erosion.
------------------------------------
Question 7: Which correctly lists three agents that loosen and carry away rock during the erosion process?
Answer: plants, animals, wind
------------------------------------
Question 8: Which processes contribute to the formation of chemical sedimentary rocks?
Answer: Minerals dissolve and crystalize.
------------------------------------
Question 9: The image shows an example of a sedimentary rock. This is the picture in text form - Brown rock containing small pieces of different materials.
Actual question: Which feature of this rock demonstrates that it is a clastic sedimentary rock?
Answer: visible rock fragments
------------------------------------
Question 10: Which process squeezes layers of sediment together?
Answer: compaction
------------------------------------------------------------------------
Pictures used in question four and question nine are in the attached pictures.
God bless! :D
Which factor is most important to keep the same when looking at the
meniscus to compare the surface tension of different liquids?
A. The intensity of light
B. Type of container
C. Temperature
D. Type of material
Answer:
b. the type of container
Explanation:
Answer:
The type of container
Explanation:
Just took the test
What is the name???????
Answer:
Carbon Hydrogen
Explanation:
I believe it means carbon (C) to one atom of hydrogen (H).
Which would have the LEAST gravitational potential energy (GPE)? A ball sitting on the ground An airplane flying 30,000 feet above the ground A rock sitting on top of Mt. Everest
Answer:
(A) A ball sitting on the ground
Explanation:
The option with the least gravitational potential energy in the question is : A: A ball sitting on the ground.
Gravitational potential energy can be regarded as the energy that is been stored in an object due to its vertical position or height. The energy is stored in the object due to the gravitational attraction of the Earth as regards the object.To calculate the Gravitational potential energy, we can use[tex]U= mgh[/tex]
h= height of the object
m= mass of the object.
In The first option, the ball is on the ground, so it has no height or vertical position making it the least object with Gravitational potential energy. Unlike the airplane that is of some miles to the ground.Therefore, option A is right.
Learn more at:
https://brainly.com/question/3884855?referrer=searchResults
The idea that the earth is divided into a number of small plates that float on the mantle and slide,collide,and slip past each other. Law or Theories
Answer:
Theories
Explanation:
It is theories because it was a generalistee abstract or thinking generalising the principle of fact about Earth tectonic plates ,it was formulated and concluded as plate tectonic theories after many findings. The theories conclude that the Earth has an outer layer called lithosphere and lies overly a plastic layer called asthenosphere. The lithosphere is divided into several plates and they move close to each other where they diverge, converge or slip over one another.
1) Why does polysubstitution frequently occur with Friedel-Crafts alkylation but not with Friedel-Crafts acylation?2) If Benzene is reacted with t-butyl chloride, why is the chief disubstituted product the para rather than ortho isomer?
Answer:
See explanation
Explanation:
Friedel-Crafts alkylation frequently undergo polysubstitution because the process leads to the addition of an electron donating alkyl group, which activates the benzene ring to further alkylation. The acyl group rather deactivates the ring towards electrophilic substitution.
When benzene is reacted with t-butyl chloride, the chief disubstituted product is the para rather than ortho isomer because the increased bulk of the tert-butyl group hinders attack at the ortho-sites.
Which of the following is one way creativity can help scientists?
By ensuring they follow the scientific method
By increasing the amount of time it takes to complete scientific experiments
By making sure they only try things that have already been proven
By leading them to ask more questions about the natural world
Answer:
Creativity can help scientists by leading them to ask more questions about the natural world.
Explanation:
Beacause they use creativity to make up questions about the natural world.
PLEASE HELP!! 74 POINTS
An igneous rock has small, dark crystals. Which statement also accurately describes this rock?
It is an intrusive rock.
It has a coarse texture.
It was found on Earth’s surface.
It was formed from slow cooling.
---------------------------------------------------------
Which is one factor that contributes to the formation of polar, temperate, and tropical zones?
the angle of the Sun’s rays
the direction of seasonal winds
the presence of prevailing winds
the movement of wind near a mountain
Answer:
It was formed from slow cooling.
the angle of the Sun’s rays
Explanation:
Answer:
D. It was formed from slow cooling.
Calculate the freezing point of a solution containing 10 grams of KCl and 1100.0 grams of water. The molal freezing point depression constant (Kf) for water is 1.86
Answer:
- 0.454 °C
Explanation:
From the given information:
The mass of KCl = 10 grams
The molar mass of KCl = 74.55 g/mol
The molality can be calculated as:
[tex]Molality \ m = \dfrac{mass \ of \ KCl \times 1000}{molar \ mass \ of \ KCl \times 1100.0}[/tex]
[tex]Molality \ m = \dfrac{10 \ g \times 1000}{74.55 \ g/mol \times 1100.0}[/tex]
Molality m = 0.1219 M
For freezing point depression;
[tex]\Delta T_R = i \times k_f \times m[/tex]
The van't Hoff's Factor (i) for KCl = 2
The molar depression of freezing point constant [tex]k_f[/tex] = 1.86° C/m
∴
[tex]\Delta T_R = 2 \times 1.86 \times 0.1219[/tex]
[tex]\mathbf{\Delta T_R = 0.454^0\ C }[/tex]
However, the freezing point of water is known to be = 0°C
Therefore, the freezing point of the solution
= 0 °C - 0.454 °C
= - 0.454 °C
HELP HELP
why are more common bone fractures among senior citizens than among young people
What stress causes this type of fault to form? O compression O gravity O tension O shearing
Answer: It’s D
Explanation:
Cuz I said so
Answer: d. Shearing
Explanation:
How many distinct dichlorination products can result when isobutane is subjected to free radical chlorination?
a. 1
b. 2
c. 3
d. 4
e. 6
Answer:
c. 3
Explanation:
Dicholorination of tertiary alkane ( i.e. isobutane) is a halogenation reaction which makes it possible to replace the alkyl functional group with halogenated chlorine.
When Isobutane is subjected to free radicals chlorination, three distinct dichlorination can be formed.
The mechanism of the formation of these products can be seen in the image attached below.
2. Why would a calcium (Ca) atom be larger than a bromine (Br) atom even
though they both have 4 energy levels? *
Within a period, the atom size decreases with increasing group number (from left to right), since the nuclear charge and the number of external electrons increase within the period, but the number of shells does not. The electrons are more strongly attracted to the nucleus and are therefore closer to the nucleus.