Salts with nitrates as the anion are generally soluble in water. The question isn’t quite clear: Are we being asked what precipitate would form if these solutions were mixed together? If that’s the case, the reaction would be as follows:
Li3AsO4(aq)+ Fe(NO3)3(aq) → 3LiNO3(aq) + FeAsO4(s).
It is odd that we’re given lithium arsenate dissolved in water to begin with as lithium arsenate should be insoluble. But assuming that it is water-soluble, we can obtain the net ionic equation for the formation of our precipitate:
Fe3+(aq) + [AsO4]3-(aq) → FeAsO4(s).
Our precipitate would be iron(iii) arsenate, FeAsO4.
Compute the mass of KI needed to prepare 500 mL of a 0.750 M solution.
Answer:
62 grams
Explanation:
Molarity=mol/liter
We have mL and Molarity
500 mL * 1 L/1000 mL=0.5
Plug 0.5 in and solve for moles
0.75=mol/0.5
0.75*0.5=0.375 mol
Convert to grams by finding the mass of KI: 39+126.9= 165.9 grams
0.375 mol KI * 165.9 grams KI/1 mol KI= 62.2125 grams
The mass of KI needed is 124.5 grams, this can be calculated by adding the values in molarity formula.
What is Molarity?It is defined as number of moles of solute over volume of solution in liters.
It is given by:
M = n/ V
What information do we have?
Molarity= 0.750 M
Volume = 500 mL= 1 L
Molar mass of KI = 166 g/mol
To find:
Mass of KI=?
On substituting the values:
M= n/V
0.750 M= n/ 1 L
n= 0.750 M* 1l
n= 0.750 moles
Number of moles is the ratio between mass and molar mass.
n= m/M
0.750 moles = m/ 166 g/mol
m= 0.750*166
m= 124.5 grams.
Thus, the mass of KI needed is 124.5 grams.
Find more information about Molarity here:
brainly.com/question/17138838
Does pb(no3)2 + Na3(PO4) = Pb3(PO4)2 + Na(NO3) have a precipitate?
Answer:
Yes, Pb3(PO4)2.
Explanation:
Hello there!
In this case, according to the given balanced chemical reaction, it is possible to use the attached solubility series, it is possible to see that NaNO3 is soluble for the Na^+ and NO3^- ions intercept but insoluble for the Pb^3+ and PO4^2- when intercepting these two. In such a way, we infer that such reaction forms a precipitate of Pb3(PO4)2, lead (II) phosphate.
Regards!
A motorcycle that travels north 201m in 7s. What is it's velocity?
7. D=
8. TE
9. V=
Calculate the density, in grams per liter, of a gas at STP if 3.56 L of the gas at 36.7 °C and 758.5 mmHg weighs 0.433 g.
density:? g/L
Answer:
the density of the Gas at STP is 0.227 g/L .
Explanation:
This question involves the combined gas law . The equation for the combined gas law
Silver sulfate dissociates into silver ions and sulfate ions:
Ag2SO4(s) = 2Ag+ (aq) + SO42- (aq)
Which of the following equations is the equilibrium constant expression for
this reaction?
A. Kot
[Ag+][80.21
[Ag 2504)
O B. Ko = [Ag+ 12 [5042")
[A92504)
O C. KE =
[Ag+1?[s042-7
O D. KG
[A92504
[Ag+ ][5042-)
Answer:
A its a step by step equation the answer is A
A gas in a sealed container has a pressure of 125 atm at a temperature of 303 K. If the pressure in the container is increased to 200 atm, what is the new temperature if the volume remains constant?
(Show work pls :)!)
Answer:
[tex]T_2=484.8K[/tex]
Explanation:
Hello there!
In this case, according to the the variable temperature and pressure and constant volume, it turns out possible for us to calculate the new temperature via the Gay-Lussac's law as shown below:
[tex]\frac{T_2}{P_2} =\frac{T_1}{P_1}[/tex]
Thus, by solving for the final temperature, T2, we obtain:
[tex]T_2 =\frac{T_1P_2}{P_1}[/tex]
So we plug in the given data to obtain:
[tex]T_2 =\frac{303K*200atm}{125atm}\\\\T_2=484.8K[/tex]
Best regards!
Is a cold and b is warm? Please help
Answer:
Label A shows cold area on the mug, while label B shows a warm area.
Explanation:
Have a good day
Identify the term that matches each electrochemistry definition.
a. The electrode where reduction occurs ___________
b. An electrochemical cell powered by a spontaneous redox reaction ___________
c. The electrode where oxidation occurs__________
d. An electrochemical cell that takes in energy to carry out a nonspontaneous redox reaction ____________
e. A chemical equation showing either oxidation or reduction ___________
Answer: a. Cathode
b. Galvanic cell
c. Anode
d. Electrolytic cell
e. half reaction
Explanation:
Galvanic cell or Electrochemical cell is defined as a device which is used for the conversion of the chemical energy produced in a spontaneous redox reaction into the electrical energy.
Electrolytic cell is a device where electrical energy is used to drive a non spontaneous chemical reaction.
In the electrochemical cell, the oxidation occurs at an anode which is a negative electrode and the reduction occurs at the cathode which is a positive electrode. Thus the electrons are produced at anode and travel towards cathode.
The balanced two-half reactions will be:
Oxidation half reaction : [tex]M\rightarrow M^{n+}+ne^-[/tex]
Reduction half reaction : [tex]N^{n+}+ne^-\rightarrow N[/tex]
Thus the overall reaction will be: [tex]M+N^{n+}\rghtarrow M^{n+}+N[/tex]
How did Robert Millikan's oil drop experiment change scientists' view of the
atom?
A. It identified the location of the nucleus.
B. It showed that atoms could not be divided into smaller particles.
C. It identified the charge on a single electron.
D. It showed that atoms were found in different energy levels.
SUBMIT
Answer:
Hello There!!
Explanation:
I think the answer is possibly C. It identified the charge on a single electron.
hope this helps,have a great day!!
~Pinky~
[tex]\huge{\textbf{\textsf{{\color{navy}{An}}{\purple{sw}}{\pink{er}} {\color{pink}{:}}}}}[/tex]
C. It identified the charge on a single electron.
ThanksHope it helpscalculate the percentage of CL in AL(CLO3)3
Answer:
46.41%
Explanation:
Find the total r.m.m of AL(CLO3)3 put it equals to 100%.....The take 106.5,the total r.m.m of Cl and find the missing which is the percentage by cross multiplication
The nature particle model of matter describe the property of solid, liquid and gas in molecular level. Which of the given statements below is TRUE?
A. Matter is made up of large particles.
B. Particles of matter have spaces between them.
C. Particles of matter are not moving all the time.
D. The particles of matter do not attract each other.
Answer:
B. Particles of matter have spaces between them.
Explanation:
The particle nature model of matter is an model used to explain the properties and nature of matter. The statements of the particle nature model of matter are as follows :
1. Matter is made of small particles of atoms or molecules.
2. The particles of matter have space between them. The spaces between the particles are least in solids as they are closely packed together but are greatest in gases whose particles are far apart from each other.
3. The particles of matter are in constant motion at all times. Solids particles are not free to move due to strong molecular forces between the particles, but are constantly vibrating in their mean positions. Liquid particles free to move due to lesser molecular forces while gas molecules which have negligible intermolecular forces have the greatest ability to move.
4. The particles of matter are attracted to each other by intermolecular forces. These forces are greatest in solids and least in gases.
The correct option is B.
How are gas giants different from each other
Answer:there different from the rocky like planets gas giants don't have such a firm surface like rocky terrestrial planets
Explanation:
What is the phase label on HCl?
A. g
B. aq
C.
D. e
E. s
Answer:
B. aq if the reaction is inorganic (double or single displacement), neutralization, etc.
Explanation:
Hello there!
In this case, unfortunately we are not given the undergoing chemical reaction; however, in the most of the double displacement, neutralization, precipitation and in general, inorganic reactions, the hydrochloric acid must be B. aq as it must be dissolved in water as the reaction media. On the other hand, in some organic reactions, it can be either aqueous or gaseous, the latter, specially as a product. For that reason, you will need to make sure whether your reaction is organic or inorganic to correctly figure out the phase label.
Best regards!
Think about a single cell and its parts; for example, think about a cell inside the human body. Now, select an everyday object that could be used as a model for a cell and its parts. In words and/or pictures, describe your model and how it is like the cell.
Answer:
Mitochondria
Hydraulic Dams
Ribosomes
Small Shops
Nucleus
Town Hall
Endoplasmic Reticulum
Railroad Tracks
Golgi Bodies
Post Office
Cytoplasm
Clean Air and Water
Protein
Widget
Cell Membrane
Fence
Lysosomes
Scrap Yard
Nucleolus
Carpenter's Union
Vacoule
Warehouse
here is some ideas
Due today! Why is it a good idea to have floating cities?
A: We are running out of land
B: We need it for pollution cleanup
C: Oceans are rising
D: It's a sustainable way to live
Answer:
in my opinion I think the answer the be "A"
2 CO + O2 → 2 CO2, how many grams of oxygen is required to produce 1.0 mole of CO2?
Answer:
16 g
Explanation:
Step 1: Write the balanced equation
2 CO + O₂ → 2 CO₂
Step 2: Calculate the moles of O₂ required to produce 1.0 moles of CO₂
The molar ratio of O₂ to CO₂ is 1:2.
1.0 mol CO₂ × 1 mol O₂/2 mol CO₂ = 0.50 mol O₂
Step 3: Calculate the mass corresponding to 0.50 moles of O₂
The molar mass of O₂ is 32.00 g/mol.
0.50 mol × 32.00 g/mol = 16 g
Which compound contains three elements?
A. Aluminium chloride
B. iron(III) oxide
C. potassium oxide
D. sodium carbonate
Answer:
Sodium Carbonate
Explanation:
Sodium carbonate is made of three elements, that are, sodium, carbon and oxygen.
Its formula is Na2CO3.
Hope it helps:)
How many joules of energy are required to vaporize 13.1 kg of lead at its normal boiling point?
Answer: 1123000 Joules of energy are required to vaporize 13.1 kg of lead at its normal boiling point
Explanation:
Latent heat of vaporization is the amount of heat required to convert 1 mole of liquid to gas at atmospheric pressure.
Amount of heat required to vaporize 1 mole of lead = 177.7 kJ
Molar mass of lead = 207.2 g
Mass of lead given = 1.31 kg = 1310 g (1kg=1000g)
Heat required to vaporize 207.2 of lead = 177.7 kJ
Thus Heat required to vaporize 1310 g of lead =[tex]\frac{177.7}{207.2}\times 1310=1123kJ=1123000J[/tex]
Thus 1123000 Joules of energy are required to vaporize 13.1 kg of lead at its normal boiling point
What is the highest occupied level of Carbon
Answer:
Highest occupied level of carbon is 3
Explanation:
its called Alkynes
Explanation:
4trust me!#carryonlearning❤Draw curved arrows to show electron reorganization for the mechanism step below. (For a resonance-stabilized anion, draw a single resonance form with the negative charge on oxygen, not on carbon.) Make the ends of your arrows specify the origin and destination of reorganizing electrons.
Answer:
Explanation:
Dear student, this question appears to be incomplete but in the diagram attached below, I have carefully drawn out the required organic structure.
The aim of this question is to show the mechanism of the given structure and to point out the resonance structure.
The first diagram shows the complete part (i.e. the structure of the organic compound) and its major product(answer).
The second diagram shows the mechanism by which we arrived at the major product.
From the second diagram attached below, the -oxo substituent of the methanol attacks the hydrogen atom as shown below, leading to the formation of the enolate ion (a resonance stabilized anion).
However, this is because the alpha carbon attaches to the hydrogens readily leaves as H⁺ to yield an enolate ion as a result of -C- that is doubly bonded to oxygen (an Electron withdrawing group).
Kindly check out the images attached below to see the mechanism.
the desity of gold is 19.3 g/cm3. what is the volume of a 13 g gold nugget .
Answer:
0.67 cm³
Explanation:
We can solve this problem by using the definition of density:
Density = Mass / VolumeWe can rearrange the equation and isolate volume:
Volume = Mass / DensityAs we are given both the mass and the density, we can now calculate the volume:
Volume = 13 g ÷ 19.3 g/cm³Volume = 0.67 cm³how we can remove temporary hardness of water?and write the chemical reaction?
Answer:
it can be removed
1. by boiling
Ca(HCO3)2 > CaCO3 + H2O +CO2
2. by treating with calcium hydroxide
The table shows characteristics of two plants, Plant A and Plant B.
Answer:
Plant A
Explanation:
Which lava contains a lot of water
Answer:
i think its magma ajani i looked it up... and chelsey said u had corona so if its true hope u get better bro
Explanation:
what is the mass of 1.5 x 10^21 silicon atoms?
Answer:
0. 070g
Mass of 1 Si atom =28.08/6.022*1023
So mass 1.5 *1021*4.6629*10-23
Answer:
[tex]\boxed {\boxed {\sf 0.070 \ g \ Si}}[/tex]
Explanation:
We are given a value of atoms and asked to find the mass. We can complete this in 2 steps.
1. Convert Atoms to Moles
First, we have to convert atoms to moles. We use Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance.
In this case, the particles are silicon atoms. We can set up a proportion.
[tex]\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]
Multiply by the value of atoms given.
[tex]1.5 \times 10^{21} \ atom \ Si *\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]
Flip the ratio. This allows the atoms of silicon units to cancel and leave the moles of silicon.
[tex]1.5 \times 10^{21} \ atom \ Si *\frac {1 \ mol \ Si } {6.022 \times 10^{23} \ atom \ Si}[/tex]
[tex]1.5 \times 10^{21}*\frac {1 \ mol \ Si } {6.022 \times 10^{23} }[/tex]
[tex]\frac {1.5 \times 10^{21} \ mol \ Si } {6.022 \times 10^{23} }[/tex]
[tex]0.002490866822 \ mol \ Si[/tex]
2. Convert Moles to Grams
Next, we convert the moles to grams. We use the molar mass, which is found on the Periodic Table. This value is the number of grams in 1 mole of a substance. Look for silicon (Si).
Si: 28.085 g/molUse this value as a ratio.
[tex]\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]
Multiply by the number of moles we calculated.
[tex]0.002490866822 \ mol \ Si *\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]
The moles of silicon units cancel, so we are left with grams.
[tex]0.002490866822 *\frac {28.085 \ g \ Si}{1}[/tex]
[tex]0.002490866822 *{28.085 \ g \ Si}[/tex]
[tex]0.06995599469 \ g \ Si[/tex]
3. Round
Finally we must round our answer. The original value has 2 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place.
[tex]0.069\underline95599469 \ g Si[/tex]
The 9 tells us to round the other 9 to a 0, then the 6 to a 7.
[tex]0.070 \ g \ Si[/tex]
The mass of 1.5 × 10²¹ silicon atoms is 0.070 grams of silicon.
explain the significance
Answer:
Dictionary
Definitions from Oxford Languages
Search for a word
significance
/sɪɡˈnɪfɪk(ə)ns/
Learn to pronounce
noun
1.
the quality of being worthy of attention; importance.
"adolescent education was felt to be a social issue of some significance"
Similar:
importance
import
noteworthiness
consequence
substance
seriousness
gravity
weight
weightiness
magnitude
moment
momentousness
memorableness
unforgettableness
pronounced nature
remarkableness
outstanding nature
markedness
obviousness
conspicuousness
strikingness
distinction
impressiveness
uncommonness
unusualness
rarity
extraordinariness
exceptionalness
specialness
cruciality
Opposite:
insignificance
2.
the meaning to be found in words or events.
"the significance of what was happening was clearer to me than to her"
Similar:
meaning
sense
signification
import
thrust
drift
gist
burden
theme
implication
tenor
message
essence
substance
relevance
If you dilute 18.8 mL of a 3.5 M solution to make 296.6 mL of solution, what is the molarity of the dilute solution?
Answer:
0.22M
Explanation:
We will be using the law of dilutions. We are simply increasing the amount of solvent to create a larger volume of solution.
So: moles before dilution = moles after dilution & [tex]moles_{concentrated} = moles_{dilute}[/tex]. And M = moles/liter of solution, so if we express this as moles = M x [tex]L_{soln}[/tex].
That is how we derive the formula we will be using: [tex]M_{concentrated} * Vol_{conc} = M_{dilute} * Vol_{dilute}[/tex]
or
[tex]M_{1} * Vol_{1} = M_{2} * Vol_{2}[/tex]
Applying this formula to our problem, we can substitute the variables with the given values to find the molarity of the dilute solution.
M1 = 3.5M
V1 = 18.8mL
M2 = ?
V2 = 296.6mL
Equation: (3.5M)(18.8mL) = (296.6mL)(M2)
==> 65.8M*mL = 296.6mL * M2
==> M2 = (65.8 M*mL)/296.6mL
==> M2 = 0.22M
What is the ratio by atoms of elements present in hafnium phosphite?
1:3:4
3:6:2
3:4:12
1:6:15
3:6:2 is the correct answer
A beaker contains 0.125 L of a 3.00 M solution. If the volume goes up to 0.325 L, what is the new molarity?
Answer:
1.15 M
Explanation:
Step 1: Given data
Initial volume (V₁): 0.125 LInitial concentration (C₁): 3.00 MFinal volume (V₂): 0.325 LFinal concentration (C₂): ?Step 2: Calculate the final concentration of the solution
We want to prepare a dilute solution from a concentrated one by adding water. We can calculate the concentration of the dilute solution using the dilution rule.
C₁ × V₁ = C₂ × V₂
C₂ = C₁ × V₁/V₂
C₂ = 3.00 M × 0.125 L/0.325 L = 1.15 M
What is the main function of burette?
Answer:
I think it A
Explanation:
Answer:
its d i think
Explanation: