Answer:
CO₃²⁻ + H₂O <----------------> HCO₃⁻ + OH⁻The chemical formula of the precipitate is Fe(OH)₃Explanation:
Fe(NO₃)₃ and K₂CO₃ are strong electrolytes and completely dissociate in water. Carbonate ions is a weak base and combine with water to form hydroxide ions (OH⁻), CO₃²⁻ + H₂O <----------------> HCO₃⁻ + OH⁻ Ferric, Fe (III), combines with these hydroxide ions to form insoluble precipitates. Fe(OH)₃ is only partially soluble i.e., it does not completely dissociate in water. When the solutions of Fe(NO₃)₃ and K₂CO₃ are mixed, Fe(OH)₃ precipitates out due to the strong electrostatic attraction between Fe (III) and hydroxide ions.Pls help! DO NOT GIVE ME A LINK AS AN ANSWER!
Recall the equation M, V1 = M2V2. Based on the presence of this amount of copper sulfate, complete the table to predict the concentration of the solution as water is added to the tank or removed from it. Don't actually change the amount of water in the tank yet. Type the correct answer in each box. Use numerals instead of words. Express each answer to two significant figures e. Volume (L) Concentration (mol/l) 1.0 0.80 0.60 0.50 0.20
Answer:
(top to bottom)
0.50
0.63
0.83
1.0
1.3
2.5
Explanation:
Answer: Answers are from top to bottom (Edmentum)
0.50
0.63
0.83
1.0
1.3
2.5
Explanation:
A piece of metal is composed of atoms. Each atom in the metal contains 29 protons. How is the metal classified?
Answer:
Explanation:
The metal is classified as a transition metal or transition element. In particular, this atom is Copper it has an atomic number of 29 which we know by the number of protons. The number of protons in an atom is the same as the atomic number.
Answer:
Copper
Explanation:
Each atom in the metal contains 29 protons.
Is the kool-aid man the jar or the liquid?
I know that this is for school but like i need to know
Answer:
I think both
Explanation:
The weight of the elephant is 4500 kg, and the area of the sole of one of its legs is 1700 cm2. Calculate the pressure of the elephant on the ground.
Answer:
64852.94 N/m²
Explanation:
From the question,
P = F/A.................... Equation 1
Where P = Pressure of the Elephant on the ground, F = Weight of the Elephant, A = Area of the sole of the four legs.
But,
F = mg.............. Equation 2
Where m = mass of the elephant, g = acceleration due to gravity
Substitute equation 2 into equation 1
P = mg/A............ Equation 3
Given: m = 4500 kg, A = (1700×4) cm² ( The elephant has four legs) = 6800 cm² = 0.68 m²
Constant; g = 9.8 m/s²
Substitute these values into equation 3
P = (4500×9.8)/0.68
P = 64852.94 N/m²
PLZ HELP! QUESTION IS BELOW! :D
Answer:
Explanation:
When we say anything is a wave, what exactly do we mean? The most intuitive and straightforward wave to envision is a water wave. A motion, more specifically, is a disturbance that propagates or travels away from its source. Water waves are caused by a disruption in the water's surface, such as a rock tossed into a pond or a swimmer splashing the surface continuously. The noise for sound waves is a rise of air pressure, which may be caused by the oscillating cone within a speaker. There are many kinds of disturbances in earthquakes, including surface disturbances and pressure disturbances under the surface. Even radio signals are best deciphered by using a comparison of sea waves Water waves are helpful to visualize since they are more than just a mental picture. The amplitude, period, frequency, and energy of water waves are all the same as they are for all waves. A small set of underlying principles can be used to describe all wave characteristics.
(hope this helps can i plz have brainlist :D hehe)
How many atoms of each element are present in methane
and propane based on their chemical formulas
Answer:
Methane has one atom of carbon and four atoms of hydrogen.
Propane has three carbon atoms and eight atoms of hydrogen.
Calculate the concentration imports per million ppm of DDT if a sample size of 5000 g contained 0.10 g DDT
Answer:
20ppm
Explanation:
parts per million are defined as the mass of solute in mg (In this case, mass of DDT) per kg of sample.
To solve this question we must find the mass of DDT in mg and the mass of sample in kg:
Mass DDT:
0.10g * (1000mg / 1g) = 100mg
Mass sample:
5000g * (1kg / 1000g) = 5kg
Parts per Million:
100mg / 5kg =
20ppmA building is found to be losing heat to the outside during the winter months. Which would be the best solution to correct this design problem?
increase amount of heating
increase surface area of walls
increase number of windows
increase thickness of insulation
no link or I will report
Answer:
increase thickness of insulation
Explanation:
don't increase amount of heating because that's difficult and not efficient.
don't increase surface area of walls because that makes heat be lost quicker.
don't increase windows because windows lose heat worse than walls.
increase thickness of insulation because it's the most effiecient and effective method of keeping heat.
La capacidad calorífica del aluminio es de 0.9 J/g C. Determine la energía necesaria calentar un bloque de aluminio de 850 g de 22.8 grados a 94.6 grados Celcius.
Answer:
La energía necesaria para calentar el bloque de aluminio es 54927 J.
Explanation:
Se denomina calorimetría a la medición y el cálculo de las cantidades de calor que intercambia un cuerpo o un sistema.
De esta manera, entre el calor y la temperatura existe una relación de proporcionalidad directa (Dos magnitudes son directamente proporcionales cuando existe una constante de manera que cuando una de las magnitudes aumenta, la otra también; y lo mismo ocurre cuando alguna de las dos disminuye.). La constante de proporcionalidad depende de la sustancia que constituye el cuerpo como de su masa, y resulta el producto del calor específico por la masa del cuerpo. Entonces, la ecuación que permite calcular intercambios de calor es:
Q=c*m*ΔT
Donde Q es el calor intercambiado por un cuerpo de masa m, constituido por una sustancia de calor específico c y donde ΔT es la variación de temperatura.
En este caso:
c= 0.9 [tex]\frac{J}{g*C}[/tex]m= 850 gΔT= Tfinal - Tinicial= 94.6 C - 22.8 C= 71.8 CReemplazando:
Q= 0.9 [tex]\frac{J}{g*C}[/tex]*850 g* 71.8 C
y resolviendo se obtiene:
Q= 54927 J
La energía necesaria para calentar el bloque de aluminio es 54927 J.
In your own words, describe the difference between Thermal Energy and Heat.
Answer:
Heat is the flow of thermal energy between two objects of different temperature whereas the thermal energy tells about how much is the transfer of energy due to temperature difference between two bodies. Hence thermal energy in transit gives heat
65 g of NaOH is dissolved to make 500 mL of solution. Find moles of NaPH and Molarity of solution.
Answer:
3.25 M
Explanation:
Number of moles = mass/ molar mass
mass of NaOH = 65 g
Molar mass of NaOH = 40 g/mol
Number of moles of NaOH = 65g/40 g/mol = 1.625 moles
Let us recall that;
n = CV
n = number of moles of solute
C = concentration of solution
V = volume of solution
C = n/V
n = 1.625 moles
V = 500/1000 L = 0.5 L
C = 1.625 moles/0.5
C = 3.25 M
This gland of the endocrine and digestive systems produces insulin to help control the body's sugar levels and enzymes which aid in digestion.
Answer:
Pancreas.
Explanation:
Living systems are self-organized life forms and are known to be very much interactive with their surroundings or environment. Also, living systems are dependent on the flow of information, matter and energy at various levels.
Some examples of living systems in organisms are respiratory system, nervous system, digestive system, and circulatory system.
Additionally, living systems comprises of the following components; cells, organs, muscle, tissues, blood, etc.
An endocrine system refers to a series of ductless glands and organs responsible for the production and secretion of hormones that are used by the body for the performance of various functions such as metabolism, controlling growth, reproduction, mood, sleep, etc. These hormones are secreted directly into the circulatory system (blood) and then transported to the organs and tissues in the body.
Pancreas is one of the glands of the endocrine and digestive systems that produces insulin to help control the body's sugar levels and enzymes which aid in digestion.
Match each scientist to their discovery regarding the atom
Thomson
Electrons have a charge of -1.
Rutherford
Atoms are indivisible
Millikan
Atoms have a positive nucleus
Dalton
Atoms contain electrons.
Answer:
Thomson--atoms cotain electron
Ernest Rutherford--atoms have a positive nucleus
R.A Millikan--electrons have Q=-1
Dalton--atoms are indivisible
Millikan---> Electrons have a charge of -1
Rutherford ---> Atoms have a positive nucleus
Thomson -----> Atoms contain electrons
Dalton --------> Atoms are indivisible
The atomic theory went through several modifications and different scientists proposed various models of the atom until our present conception of the atom was developed.
The atom was first defined as the smallest indivisible particle of a substance. This idea of "indivisibility" of the atom stems from Dalton's theory.
The fact that atoms were composed of negatively charged electrons was proven by the experiments of J.J Thompson using the cathode ray tube. Millikan's charge to mass experiment showed that the electron has a charge of -1.
Rutherford, in his famous gold foil experiment showed that atoms were composed of a positively charged nucleus.
Learn more: https://brainly.com/question/1596638
HURRY WILL GIVE BRAINLIETS How are proteins and nucleic acids related? They both provide energy. They both carry genetic information. The structure of proteins is determined by nucleic acids. The subunits of nucleic acids are also the subunits of proteins.
Answer: the answer is “C”
Explanation:
Took the T E S T
Which statement below is false when 10 g of nitrogen reacts with 5.0 g of hydrogen to produce ammonia?
N2 (g) + 3 H2 (g) → 2 NH3 (g)
Answer:
The theoretical yield of ammonia is 15 g.
Explanation:
The statements are:
2.8g of hydrogen are left over.
Hydrogen is the excess reactant.
Nitrogen is the limiting reactant.
The theoretical yield of ammonia is 15 g.
To solve this question we must find the moles of each reactant. Thus, we can find the limiting reactant. With limitinf reactant we can find the theoretical yield and the amount in excess of the reactant that is in excess:
Moles Nitrogen -28g/mol-
10.0g * (1mol / 28g) = 0.357 moles
Moles hydrogen -2g/mol-
5.0g * (1mol / 2g) = 2.5 moles
For a complete reaction of 0.357 moles of nitrogen are required:
0.357mol N2 * (3mol H2 / 1molN2) = 1.071 moles hydrogen.
As there are 2.5 moles of hydrogen, hydrogen is the excess reactant and nitrogen is the limiting reactant
The moles of hydrogen that are left over are:
2.5moles - 1.071moles = 1.429moles Hydrogen
The mass is:
1.429moles Hydrogen * (2g / mol) = 2.8g of hydrogen are left over
The moles of ammonia produced are:
0.357mol N2 * (2mol NH3 / 1molN2) = 0.714 moles of ammonia are produced (Theoretical moles)
The theoretical mass is (Molar mass NH3 = 17g/mol):
0.714 moles of ammonia * (17g / mol) =
12g of ammonia is the theoretical mass
The false statement is:
The theoretical yield of ammonia is 15 g.The false statement, when 10 g of nitrogen reacts with 5.0 g of hydrogen to produce ammonia is that the theoretical yield of ammonia is 15g.
How moles is calculated?Moles of any substance will be calculated as:
n = W/M, where
W = given mass
M = molar mass
Given chemical reaction is:
N₂(g) + 3 H₂(g) → 2 NH₃(g)
Moles of 10g of N₂ = 10/28 = 0.357 moles
Moles of 5g of H₂ = 5/2 = 2.5 moles
From the stoichiometry of the reaction:
1 mole of N₂ = react with 3 moles of H₂
0.357 moles of N₂ = react with 3×0.357=1.071 moles of H₂
Here nitrogen is the limiting reactant and hydrogen is excess reactant, and formation of ammonia depends on the limiting reactant.
1 mole of N₂ = react with 2 moles of NH₃
0.357 moles of N₂ = react with 2×0.357=0.714 moles of NH₃
Now we calculate the mass of ammonia from the given moles as:
M = (0.714) (17) = 12 g.
Hence, the false statement is that theoretical yield of ammonia is 15g.
To know more about moles, visit the below link:
https://brainly.com/question/15356425
9. Which indicator would show a pH change from 6 to 7?
Phenol red indicator
Blue litmus indicator
Red litmus indicator
Methyl red indicator
Will give brainliest!!!!
Answer:
hi
Explanation:
because
Which pair of compounds represents one Arrhenius acid and one Arrhenius base?
1. CH3OH and NaOH
2. HNO3 and NaOH
3. CH3OH and HCI
4. HNO3 and HCI
Answer: C HNO3 and NaOh
Explanation:
How are molecules, compounds, and substances related?
Answer:
Molecule is the general term used to describe any atoms that are connected by chemical bonds. Every combination of atoms is a molecule. A compound is a molecule made of atoms from different elements. All compounds are molecules, but not all molecules are compounds.
Explanation:
i hope you mark me the brainliest
All of the following contribute to the evolution of a species EXCEPT -
O Respiration
O Adaptations
O Mutations
ONatural selection
Answer:
Respiration
Explanation:
Respiration is the system of how an animal breathes
Predict what happens when tin metal is placed into
a solution of nickel(II) iodide.
A. Tin(II) iodide forms
B. Tin metal dissolves
C. Nothing
D. Both a and b happen
E. Nickel is plated onto tin
Answer:
I would say A but I'm not sure
When tin metal is placed into a solution of nickel (II) iodide then nothing will occur.
What is reactivity series?Reactivity series of the metals tells about the increasing or decreasing orders of the reactivity of the metals.
According to the reactivity series, reactivity of nickel metal is more than the tin metal. So, if we add tin metal in the solution of nickel (II) iodide then no reaction occurs. Because the reactivity of tin is less as compare to nickel metal so it is not possible for tin to replace the nickel metal and get dissolve.
Hence, option (C) is correct i.e. nothing.
To know more about reactivity series, visit the below link:
https://brainly.com/question/17469010
Why do you think the same color M&M was used in each sample of water?
Answer:
The candy coating is made up of coloring and sugar. The coloring and the sugar molecules both have positive and negative charges on them. The water molecule has positive and negative charges so it can attract and dissolve the color and sugar pretty well.
Explanation:
go to https://www.acs.org/content/acs/en/education/whatischemistry/adventures-in-chemistry/experiments/dissolving-m-ms.html#:~:text=The%20candy%20coating%20is%20made,color%20and%20sugar%20pretty%20well.
1
The table gives the composition of three particles
particle
number of
protons
number of
electrons
number of
neutrons
А
15
16
B
15
16
с
15
17
(a) What is the evidence in the table for each of the following?
(i) Particle A is an atom.
(ii) A, B and C are all particles of the same element
Answer:
the answer is wurkey churkey since the birdy is really really cute
Explanation:
if the birdy was not squishy then it would have died already?!?!?
For the reaction represented by the equation:
Cl2 + 2KBr → Br2 + 2KCl
how many grams of KCl can be produced from 356 grams KBr?
Answer:
223 g KCl
General Formulas and Concepts:
Atomic Structure
Reading a Periodic TableMolesStoichiometry
Using Dimensional AnalysisAnalyzing reactions RxNExplanation:
Step 1: Define
[RxN - Balanced] Cl₂ + 2KBr → Br₂ + 2KCl
[Given] 356 gg KBr
[Solve] g KCl
Step 2: Identify Conversions
[RxN] 2 mol KBr → 2 mol KCl
[PT] Molar Mass of K - 39.10 g/mol
[PT] Molar Mass of Br - 79.90 g/mol
[PT] Molar Mass of Cl - 35.45 g/mol
Molar Mass of KBr - 39.10 + 79.90 = 119 g/mol
Molar Mass of KCl - 39.10 + 35.45 = 74.55 g/mol
Step 3: Stoichiometry
[DA] Set up conversion: [tex]\displaystyle 356 \ g \ KBr(\frac{1 \ mol \ KBr}{119 \ g \ KBr})(\frac{2 \ mol \ KCl}{2 \ mol \ KBr})(\frac{74.55 \ g \ KCl}{1 \ mol \ KCl})[/tex][DA] Divide/Multiply [Cancel out units]: [tex]\displaystyle 223.024 \ g \ KCl[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
223.024 g KCl ≈ 223 g KCl
In any engineering design problem, the first step is to understand the problem and identify one or more possible solutions. In this task, you’ll analyze the problems you face as the chemical engineer challenged with setting up the ammonia-making process. Recall the chemical equation for producing ammonia:
N2 + 3H2 ⇌ 2NH3 + energy
1.Explain the problem surrounding the ammonia-making process in terms of chemical equilibrium.
Answer:
Explanation:
About 2,070 results (0.60 seconds)
Answer is: at lower temperatures the reaction rate would decrease. The lower is the temperature, the slower the reaction becomes. ... Because this is exothermic reaction (enthalpy is less than zero), at lower temperatures, the equilibrium is in favor of ammonia, but the reaction doesn't proceed at a detectable rate.
Hi,
let us go through the question again
N2 + 3H2 ⇌ 2NH3 + energy
Explain the problem surrounding the ammonia-making process in terms of chemical equilibrium.
So I would approach this question on the basis of effect of each of the reactants and products concentration on the equilibrium synthesis of ammonia.
If the concentration of any reactant is increased, the yield of ammonia is increased.
If the concentration of ammonia is reduced by removing it as it forms, the yield will as well be increased.
This reaction also yields heat meaning it is an exothermic reaction, so when we increase the temperature, the yield will be reduced. Hence it is favored by low temperature.
Pt3 science......
Select correct answer ♡ !
Answer:
Neon
(if you want a thorough explanaion, just ask for one)
It is C! <3
The reason it's C because pt3 is Sugar science name get it?
Dos objetos presentan fuerzas eléctricas repulsivas entre sí. ¿Cómo pueden ser las cargas eléctricas de estos objetos?
Answer:
Las cargas eléctricas de los objetos son ambas positivas o son ambas negativas.
Explanation:
Si dos objetos presentan fuerzas eléctricas repulsivas entre sí, quiere decir que ambos tienen el mismo tipo de carga.
Las cargas iguales (positivo con positivo, o negativo con negativo) se repelen, mientras que las cargas diferentes (positivo con negativo) se atraen.
Larissa is making sautéed purple cabbage. First, she washes and cuts the cabbage into long thin strands. Then, she puts a
pan on the stove and adds butter. She allows the butter to melt and turn to liquid. Next, she adds the cabbage to the butter
sprinkles some salt on it, and stirs it. Larissa watches as the cabbage sizzles, releases steam, and softens. To finish the side
dish, she adds a squeeze of lemon juice to it, which causes it to change from purple to pink. Finally, Larissa empties the
cabbage into a bowl and puts it on the dinner table.
Which of the events involves a chemical reaction?
O Larissa adds butter to a pan and allows it to melt and turn to liquid.
O Larissa adds a squeeze of lemon juice to the cabbage, and it turns pink.
O Larissa watches as the cabbage sizzles, releases steam, and softens.
O Larissa washes and cuts some purple cabbage into long thin strands.
O Larissa empties the cabbage into a bowl and puts it on the dinner table.
O Larissa adds the cabbage to the butter with a sprinkle of salt and stirs it.
Answer:
When she adds lemon juice
Explanation:
I believe that it is when she adds lemon juice. Lemon juice is an acid, which causes a chemical reaction. It turns from purple to pink because of the acid. Lmk if it's right but I'm 99.9% percent certain it is correct.
How many moles of mercury(II) oxide, HgO, are needed to produce 125 g of oxygen, O2? How many moles of mercury is produced?
Laughing gas (nitrous oxide, N2O) is sometimes used as an anesthetic in dentistry. It is produced when ammonium nitrate is decomposed according to the following reaction.
NH4NO3(s) ---> N2O(g) + H2O(l) How many grams of NH4NO3 are required to produce 33.0 g N2O? and How many grams of water are produced in this reaction?
Answer: 7.81 mol HgO (How many moles of mercury(II) oxide, HgO, are needed to produce 125 g of oxygen, O2?)
Explanation:
How much heat, in kJ, is released when 6 mol of water at 0°C freezes to ice at 0°C if ΔHsolid for water = –6.01 kJ/mol?
Answer:
12.3 kJ
Explanation:
For a given substance, the molar heat of fusion basically tells you one thing from two perspectives
how much heat is needed in order to melt one mole of that substance at its melting point
how much heat must be removed in order to freeze one mole of that substance at its freezing point
It is very important to realize that the molar enthalpy of fusion will carry a positive sign when you're dealing with melting and a negative sign when you're dealing with freezing.
Which of the following is true about limiting and excess reagents?
Links are reported
Answer:
the first one
Explanation:
I take this subject