Answer:
nm, dm, km, m
Explanation:
1 nanometer = 1e-12 (0.000000000001) kilometers
1 decimeter = 1e-4 (0.0001) kilometers
1 kilometer = 1 kilometer
Regardless of whether 'm' stands for mile or meter, it's still larger than all of these being approx. 1.61 and 1e-3 (0.001) kilometers respectively.
in the future, please provide the exact units.
Such as:
nanometers, decimeters, kilometers, meters
Please help me in this question about series circuit and pararell circuit
Explanation:
it is a parallel circuit.
hope this helps you.
What is chlorine iodine ?
Answer:
Chlorine Iodine is a compound made out of one Chlorine molecule and one Iodine molecule
Explanation:
14. Which has the lowest ionization energy?
A. beryllium (Be) B. strontium (Sr) Calcium (Ca) D. magnesium (Mg)
Answer: B. strontium
Explanation: This is due to electrons being further away from the nucleus in strontium.
According to Hebrews 11, what did Abraham believe God would do if Isaac was slain as a sacrifice? Please help me I need it for tonight!
Answer:
ABRAHAM DIDN’T THINK ISAAC WOULD DIE!
When they reached the mountain, Abraham told his servant, “Stay here with the donkey; I and the boy will go over there and worship and come again to you” . The text is careful to include both Abraham and Isaac in the return journey.
Or consider Isaac’s question about where the lamb for the sacrifice would come from. Abraham responds, “God himself will provide the lamb”. It seems Abraham prepared himself to do what God asked, but he expected something else to happen.
The author of the book of Hebrews gives us insight to Abraham’s thoughts. It says, “He considered that God was able even to raise [Isaac] from the dead” Instead of a resurrection, Abraham was spared the sacrifice.
How is the atomic mass of an element related to a mole?
O A. The atomic mass, in grams, is the mass of 6.02 x 1023 moles.
O B. The atomic mass, in grams, is the mass of 6.02 x 1023 electrons.
O C. The atomic mass, in grams, is the mass of one mole of atoms.
O D. The atomic mass, in grams, is the mass of one mole of protons.
Answer:
i the answer to your question should be C
Explanation:
Hope this helps!
The atomic mass of an element related to a mole in grams, is the mass of one mole of atoms. Therefore, option C is correct.
What is an atomic mass ?An atom's mass is its atomic mass. Although the kilogramme is the SI measure of mass, the unified atomic mass unit, or dalton, is a common way to express atomic mass. An unbound carbon-12 atom in its ground state has a mass of 112 of a Da.
A mass that is one-twelfth the mass of an atom of carbon-12 is known as an atomic mass unit. Any isotope of any element's mass is represented in terms of the carbon-12 reference standard.
The size of an atom is indicated by its atomic mass. Technically speaking, an atom's mass is the total weight of its protons, neutrons, and electrons.
Thus, option C is correct.
To learn more about an atomic mass, follow the link;
https://brainly.com/question/17067547
#SPJ2
One student made the incomplete diagram shown below to represent the relationship between Magma, Igneous Rocks, and Metamorphic Rocks.
Which of these is the correct next step to complete the diagram?
A. Put an arrow labeled deposition and lithification, pointing from Igneous Rocks to Magma.
B. Put an arrow labeled heat and pressure, pointing from Magma to Igneous Rocks.
C. Put an arrow labeled heat and melt, pointing from Metamorphic Rocks to Magma.
D. Put an arrow labeled cools and crystallizes, pointing from Igneous Rocks to Metamorphic Rocks.
Answer:
the answer is B
Explanation:
this shows the next step and shows how magma turns into igneous rocks by heat and pressure
In one to two sentences, describe an experiment that would show that intramolecular forces (attractions between atoms within molecules) are stronger than intermolecular forces (attractions between molecules).(2 points)
An experiment that would show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
Intramolecular forces are the forces of attraction that hold atoms together within a molecule. Intramolecular forces require a high amount of energy to splits atoms or molecules in a chemical bonding.
Intermolecular forces are weaker forces of attraction that occur between molecules. They require lesser energy to splits molecules compared to intramolecular forces.
An experiment that would show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
In the process, the energy required to change the state from ice to steam water is more than intermolecular forces.
Thus, we can conclude that this experiment shows that the intramolecular forces are stronger than the intermolecular forces.
Learn more about Intramolecular forces here:
https://brainly.com/question/13588164
what is the element found in all living matter.
Answer:
There are four elements that are found in all living animals, that are:
Oxygen (O)
Carbon (C)
Hydrogen (H)
Nitrogen (N).
the normal human eye responds to visible light of wavelength range from about 390 to 710nm. Determine the frequency range of the human eye.
Explanation:
=>7.7 x10¹⁴ to 4.2 x10¹⁴Hz
What is the function of the nervous system? What is the basic unit of the nervous system?
#Nova
Answer:
The basic unit of the nervous system is a nerve cell or neuron. The nervous system transmits signals between the brain and the rest of the body, this way, the nervous system's activity controls the ability to move, breathe, see, and think.
Explanation:
Have a great rest of your day
#TheWizzer
A chemical engineer must be able to predict the changes in chemical concentration in a reaction. dC/dt = -kCn where C is chemical concentration and k is rate constant. Order of reaction is the value of n. The first order reaction that combines tert-butyl bromide and water to produce tert-butyl alcohol and hydrogen bromide is shown below; (CH3)3CBr + H2O (CH3)3COH +HBr From the experimental data, k was estimated to be k = 0.0537 (h -1 ). Determine concentration after 1 hour, if C(0) = 0.2 mol/L
Answer:
Explanation:
Consider the general chemical reaction
[tex]\mathrm{A} \ \overset{k}{\longrightarrow} \ \mathrm{product}[/tex] .
If [A] is the concentration of A (reactant) at any time t and n is the reaction order for the whole equation, the rate is then related to the concentration of reactant A with the following differential form of equation
[tex]Rate \ = \ -\displaystyle\frac{d[\mathrm{A}]}{dt} \ = \ k[\mathrm{A}]^{n}[/tex] .
where k is the rate constant.
*Note that the differential term [tex]\displaystyle\frac{d[\mathrm{A}]}{dt}[/tex] has a negative sign to denote that the concentration of A is decreasing over time t.
Since the chemical reaction between tert-butyl bromide and water is given to be a first-order reaction, hence n = 1, and the resulting differential equation becomes
[tex]Rate \ = \ -\displaystyle\frac{d[\mathrm{A}]}{dt} \ = \ k[\mathrm{A}]^{1} \ = \ k[\mathrm{A}][/tex]
To solve this first-order linear homogenous differential equation, the method of separation of variables can be used.
[tex]\-\hspace{1cm} \displaystyle\frac{d[\mathrm{A}]}{dt} \ = -\ k[\mathrm{A}] \\ \\ \-\hspace{0.5cm} \displaystyle\frac{1}{[\mathrm{A}]} \, d[\mathrm{A}] \ = -\ k \, dt \\ \\ \int\ {\displaystyle\frac{1}{[\mathrm{A}]} \, d[\mathrm{A}] \ = \ -\int {k} \, {dt}[/tex]
[tex]\ln{[\mathrm{A}]} \ = \ -kt \ + \ C \\ \\ \-\hspace{0.45cm} $[A]$ \ = \ e^{-kt \ + \ C} \\ \\ \-\hspace{0.45cm} $[A]$ \ = \ e^{-kt}e^{C} \ \ \ \ \ \ \ \ \ (e^{a \ + \ b} \ = \ e^{a}e^{b} \ \ \ \mathrm{by \ the \ law \ of \ indices})[/tex]
Since the term [tex]e^{C}[/tex] is a constant, let [tex]\alpha \ = \ e^{C}[/tex], hence [tex][\mathrm{A}] \ = \ \alpha e^{-kt}[/tex] or [tex]C \ = \ \alpha e^{-kt}[/tex] according to the question. Given that the initial concentration (t = 0) of tert-butyl bromide is 0.2 mol/L and k = 0.0537[tex]\mathrm{h^{-1}}[/tex], so
[tex]0.2 \ = \ \alpha e^{-0.0537 \ \times \ 0} \\ \\ 0.2 \ = \ \alpha \ \ \ \ \ (e^{0} \ = \ 1)[/tex]
Therefore, the rate equation is [tex]C \ = \ 0.2e^{-0.0537t}[/tex].
The concentration of tert-butyl alcohol after 1 hour is
[tex]C \ = \ 0.2e^{-0.0537 \ \times \ 1} \\ \\ C \ = \ 0.2e^{-0.0537} \\ \\ C \ = \ 0.190 \ \mathrm{mol/L} \ \ \ (3 \ \ \mathrm{s.f.})[/tex]
Which element is shown below? How do you know?
How many moles are in 500 g of P
Answer:
.....................
30.973761
Which element(s) would you expect to behave similarly to Gadolinium? What properties of would you expect to be the same, what would be different?
The elements in the lanthanide series are similar to gadolinium.
The periodic table is arranged in groups and periods. Elements in the same group have similar properties. At the bottom row of the periodic table lies a group of elements that have unique properties called the lanthanides. This is where Gadolinium belongs.
The elements in the lanthanide series such as europium and terbium are similar to gadolinium. The lanthanides are similar in chemical reactivity and appearance. However, the density of the metals differ because it increases with increase in atomic number.
Learn more: https://brainly.com/question/1415109
true or false a change in state of matter would be considered a physical change
Answer:
true
Explanation:
Because the changes in state of matter would be considered
Why do nonmetal atoms share electrons in covalent bonds
Answer:
pairs of electrons
Explanation:
covalent bondin occurs when pairs of electrons are shared by atoms.... nonmetal will readily form covalent bonds with other nonmetal in order to obtain stability.
true or false in a chemical reaction the same number of each type of atom will always be present before and after the reaction takes place
Answer:
True
Explanation:
True because of the law of conservation of mass, the same same amount of atoms will be on both sides of the reaction.
how are homogeneous mixtures different from heterogeneous mixtures
Answer:
In Homogenous mixtures, the whole mixture is in the same phase whereas in Heterogeneous mixture, substances can be of two phases and layers may separate. ... Homogeneous mixture could be exemplified as a sugar solution or salt solution whereas Mixture of salt and sand could be used as an example of Heterogeneous mixture.
Heart, 5 stars, and Brainiest to first right answer!
Which two types of air masses would likely form a subtropical jet stream?
Warm and cool air masses meeting near the North Pole
Cool and warm air masses meeting near the equator
Multiple warm air masses meeting near the equator
Two or more cool air masses meeting near the South Pole
Answer:
Give person above me brainliest
Explanation:
true or false in a chemical reaction some of the atoms will be changed into different type of atoms
Answer:
It's false
Explanation:
1. Here is a chemical equation: C2H2 + O2 → CO2 + H2O
• A Balance this chemical equation.
• B State what type of chemical reaction this is.
• C What will happen during this reaction besides just CO2 and H2O being released.
• D Discuss how your balanced chemical equation agrees with the law of conservation of mass.
2. Balance each of the reactions listed below. What type of reactions are they? Single-displacement, double-displacement, synthesis, decomposition, or combustion reaction.
• A Na + Cl2 → NaCl
• B Fe + O2 → FeO
Answer:
1) a) 2 C2H2 + 3O2 --> 2CO2 + 2H2O
b) Combustion Reaction
c) Bonds will be broken on the reactant side which will require energy.
d) It agrees with the law of conservation of mass because there are the same amount of molecules of each element on both sides of the equation, meaning mass was not created nor destroyed.
2) a) 2Na + Cl2 --> 2NaCl
Synthesis
b) 2Fe + O2 --> 2FeO
Synthesis
Hope this helps!
Explanation:
To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. Therefore, the balanced equation is
2 C[tex]_2[/tex]H[tex]_2[/tex]+ 3O[tex]_2[/tex] [tex]\rightarrow[/tex] 2CO[tex]_2[/tex]+ 2H[tex]_2[/tex]O
What is Balanced equation?Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.
a) 2 C[tex]_2[/tex]H[tex]_2[/tex]+ 3O[tex]_2[/tex] [tex]\rightarrow[/tex] 2CO[tex]_2[/tex]+ 2H[tex]_2[/tex]O is the balanced equation
b)Reaction is a Combustion Reaction
c) energy is required for the breaking of bond.
d) It agrees with the law of conservation of mass as the number of atoms of each element on reactant and product side is same.
Therefore, the balanced equation is
2 C[tex]_2[/tex]H[tex]_2[/tex]+ 3O[tex]_2[/tex] [tex]\rightarrow[/tex] 2CO[tex]_2[/tex]+ 2H[tex]_2[/tex]O
Learn more about the balanced equation, here:
https://brainly.com/question/7181548
#SPJ2
When vectors are added or subtracted, the net force is called the _____.
will give brainliest to whoever gets it right
Answer:
resultant
Explanation:
Producers are the most numerous group in an ecosystem. Why?
-------------------------------------------------------------------------------------------------
Producers produce food energy for themselves and all the other levels. ⬜
Soil and temperature conditions in an ecosystem always favor producers. ⬜
As energy flows through the ecosystem, some energy is added at each step. ⬜
There is more room for small organisms than there is for large ones. ⬜
Answer:
The primary producer uses some of that energy. Because we lose energy each time we move up a trophic level, we have more producers than consumers, more herbivores than carnivores, more primary consumers than secondary consumers. See this Socratic answer for more detail.
Explanation:
Answer:
Producers produce food energy for themselves and all the other levels
Explanation:
It takes about 38 m3 of boards and plywood to build an average-size, single-family home. Can an average-size, single-family home be built with one day’s output from the saw mill? About how many days will it take for the saw mill to produce enough lumber to build a neighborhood of 100 average-size homes?
A) The answer to whether an average-size, single-family home be built with one day’s output from the saw mill is; No, it can't be built from one days output
B) The number of days will it take for the saw mill to produce enough lumber to build a neighborhood of 100 average-size homes is; 1100 days
A) From research, the average size capacity saw mill usually produces around 1500 board feet of boards per day.
Now, converting board ft to cubic meter gives;
1 board feet = 1/424 m³
Thus; 1500 board feet = 1500 * 1/424 ≈ 3.54 m³
Now, we are told that it takes 38 m³ of boards and plywood to build an average size single family home.
Since one days output = 3.54 m³
It is less than the volume required for the average sized house and so the daily output will not be sufficient.
B) Number of days to produce enough boards and plywood for the average sized family home = 38/3.54 ≈ 11 days
Thus, for 100 homes;
Number of days = 100 * 11 = 1100 days
Read more about production capacity at; https://brainly.com/question/25899399
PLEASE HELP GIVING brainless
Answer:
An unbalanced force causes the object to change position.
Explanation:
An unbalanced force causes the object on which it is acting to accelerate, changing its position, speed, or direction due to equal forces on opposite sides.
Explain why aluminum does not react with potassium nitrate (KNO3) although it reacts with copper nitrate
Answer:
Potassium is more reactive than aluminium, so no reaction takes place. But aluminium is more reactive than copper, so it replaces the copper in copper nitrate
Explanation:More reactive metal compound + less reactive metal
-> no reaction
However
Less reactive metal compound + more reactive metal
-> more reactive metal compound + less reactive metal
This is called substitution reaction where the more reactive metal replaces the less reactive metal in the compound.
When Zinc-67 is bombarded with a neutron, a gamma ray is emitted. What radioactive isotope is produced?
Answer:16/29
Explanation:
Nitric oxide (NO) from car exhaust is a primary air pollutant. Calculate the equilibrium constant for the reaction
N2(g) + O2(g) equilibrium reaction arrow 2 NO(g)
at 25°C using the data listed in the supporting materials.
Calculate the equilibrium constant at 1496°C, which is a typical temperature inside the cylinders of a car's engine after it has been running for some time. (Assume that both ΔrH° and ΔrS° are temperature independent.)
This problem is asking for the equilibrium constant at two different temperatures by describing the chemical equilibrium between gaseous nitrogen, oxygen and nitrogen monoxide at 25 °C and 1496 °C as the room temperature and the typical temperature inside the cylinders of a car's engine respectively:
N₂(g) + O₂(g) ⇄ 2 NO(g)
Thus, the calculated equilibrium constants turned out to be 6.19x10⁻³¹ and 9.87x10⁻⁵ at the aforementioned temperatures, respectively, according to the following work:
There is a relationship between the Gibbs free energy, enthalpy and entropy of the reaction, which leads to the equilibrium constant as shown below:
[tex]\Delta _rG=\Delta _rH-T\Delta _rS\\\\\Delta _rG=-RT ln(K)[/tex]
Which means we can calculate the enthalpy and entropy of reaction and subsequently the Gibbs free energy and equilibrium constant. In such a way, we calculate these two as follows, according to the enthalpies of formation and standard entropies of N₂(g), O₂(g) and NO(g) since these are assumed constant along the temperature range:
[tex]\Delta _rH=2*90.25 kJ/mol - (0 kJ/mol+0 kJ/mol)=180.5kJ/mol\\\\\Delta _rS=2*(0.211 kJ/mol*K)-(0.192kJ/mol*K+0.205kJ/mol*K)=0.025kJ/mol*K[/tex]
Then, we calculate the Gibbs free energy of reaction at both 25 °C and 1496 °C:
[tex]\Delta _rG_{25\°C}=180.5-(25+298.15)*0.025=172.42kJ/mol\\\\\Delta _rG_{1496\°C}=180.5-(1496+298.15)*0.025=135.65kJ/mol[/tex]
And finally, the equilibrium constants derived from the general Gibbs equation and Gibbs free energies of reaction:
[tex]K=exp(-\frac{\Delta _rG}{RT} )\\\\K_{25\°C}=exp[-\frac{172420 J/mol}{(8.3145\frac{J}{mol*K})(298.15K)} ]=6.19x10^{-31}\\\\K_{1496\°C}=exp[-\frac{135650J/mol}{(8.3145\frac{J}{mol*K})(1769K)} ]=9.87x10^{-5}[/tex]
Learn more:
(Gibbs free energy) https://brainly.com/question/15213613How could you distinguish a compound from a mixture
Answer:
Compound are substances which can be formed by chemically combining two or more elements. Mixtures are substances that are formed by physically mixing two or more substances.Find the volume of 8 gram of oxygen gas