Navigate to where you want to create the new folder, and click New Folder. Type the name of your folder, and press Enter. To save a document to the new folder, open the document, and click File > Save As, and then browse to the new folder, and click Save.
Let f(w) = 2w^3 - 5. Let z = 2. What is f(z)?
Answer:
Hence f(z)=11
*This is what i think*
Which of the following emergencies are weather-related? A. Ice storm B. Hurricane C. Earthquake D. A and B
Answer:
The answer is D. A and B
Explanation:
I think the answer is D because Ice storms are caused by freezing rain and Hurricanes are formed near the equator over warm ocean waters. both of them are weather-related.
Answer: The answer is D. A and B
Explanation: I took this test 5 mins ago and it was right.
Consider an instruction within a certain instruction-set architecture (ISA): ADD R1, R2, R3. This instruction adds the value in Register R1 with the value in Register R2, and stores the result in Register R3. What is the maximum number of physical memory accesses that may be caused by this single instruction?
a) 1
b) 2
c) 3
d) 4
Answer:
C = 3
Explanation:
The maximum number of physical memory accesses that may be caused by this single instruction is ; 3
This is because In the case of loading two values into R2 and R3 there is need for their memories to be accessed and after execution R1 value there will be a write back into memory hence another memory is also accessed and that makes the number of Physical memories accessed to be three(3) in Total
need help asap
Which statement is true of emerging technologies?
Advancements in communication technologies played a minor part in the rise of globalization.
Developments in communication helped remote locations connect with the world.
Malicious entities can misuse emerging technologies.
There are few disadvantages to the widespread growth of the internet.
The complexity of wireless communication prohibits it from being provided in remote locations
Answer:
Advancements on communication technologies played a minor part in the rise of globalization.
Explanation:
Answer:
Developments in communication helped remote locations connect with the world.
Explanation:
I took the test, plato/edemetuimedemetuim
The coding system that has just two characters is called:
a
binary
b
dual.
c
basic.
d
double.
Answer:
A. Binary
Definition:
Pertaining to a number system that has just two unique digits 0 and 1. - binary code
Answer:
a binary
Explanation:
ascii. an agreed method for paring the alpanumeric characther set with binary repersenations used in computers. binary. Pertaining to a number system that has just two unique digits 0 and 1. binary code.
Write a loop that sets newScores to oldScores shifted once left, with element 0 copied to the end. Ex: If oldScores
Answer:
Explanation:
The following is written in Java. It is a method/function that takes the oldScore as an int input. It turns it into a String, separates all the digits, puts them into an array. Then adds the first digit to the end and removes it from the beginning, thus shifting the entire score one to the left. Then it turns the String variable back into an Integer called finalScore and prints it out.
public static void newScore(int oldScore) {
ArrayList<Integer> newScore = new ArrayList<>();
String stringOldScore = String.valueOf(oldScore);
for (int x = 0; x < stringOldScore.length(); x++) {
newScore.add(Integer.parseInt(String.valueOf(stringOldScore.charAt(x))));
}
newScore.add(newScore.get(0));
newScore.remove(0);
String newScoreString = "";
for (int x:newScore) {
newScoreString += String.valueOf(x);
}
int finalScore = Integer.parseInt(newScoreString);
System.out.println(finalScore);
}
What causes them to catch your attention in advertisements?
Answer:
advertisement should be nice and attractive to get attention of people
What game is this? helpppppp
Answer:
the sims lol
Explanation:
describe PROM, EPROM and EEPROM memories
Answer:
Explanation:
PROM is a Read Only Memory (ROM) that can be modified only once by a user while EPROM is a programmable ROM that can be erased and reused. EEPROM, on the other hand, is a user-modifiable ROM that can be erased and reprogrammed repeatedly through a normal electrical voltage.
The Mac’s GUI set it apart from earlier operating systems.
True or False
Answer:
Its true
Explanation:
Just took the test.
explain mechanical computer ,electromechanical and electronic computer with example
Answer:
A mechanical computer uses moving parts to do it’s calculations. Think old style adding machines.Electronic computers use electronic oscillators to generate a clock. The oscillator might include a mechanical element such as a crystal, but the majority of the clock signal is processed in the electrical domain.
Explanation:
An example of a mechanical computer clock is a Swiss watch movement, which needs no electronics. Movement is based upon springs coupled to other mechanical pieces. Swiss watches are high precision mechanical computers that do counting. There are other types of more sophisticated mechanical computers. Research the works of Konrad Zuse and his Z1 mechanical computer.
A network the size of the Internet requires DNS services in order to function. Discuss the advantages and disadvantages of implementing DNS relative to the size of the network.
Answer:
Advantages
Host Naming : For DNS Implementation there is no need to create and maintain a local names configuration file also there is no need to understand complex Oracle Names administration procedures and this because the name of the host is sufficient enough for one to establish a connectionLocal Naming : It's relative easier to resolve service name addresses and also across different protocolsDisadvantages
Host Naming : The disadvantage is that your client and the server connects making use of TCIP/IPLocal Naming : The disadvantage as regards to local naming is that it will require the local configuration of all service and address name changes to carry out local namingExplanation:
Advantages
Host Naming : For DNS Implementation there is no need to create and maintain a local names configuration file also there is no need to understand complex Oracle Names administration procedures and this because the name of the host is sufficient enough for one to establish a connectionLocal Naming : It's relative easier to resolve service name addresses and also across different protocolsDisadvantages
Host Naming : The disadvantage is that your client and the server connects making use of TCIP/IPLocal Naming : The disadvantage as regards to local naming is that it will require the local configuration of all service and address name changes to carry out local namingJamal wants to write a program that will find the 10 most common words in Romeo and Juliet. Which of the following constructs will be most helpful?
A. counter module
B. while loop
C. for loop
D. mean module
Answer:
The answer to this question is given below in the explanation section.
Explanation:
The correct answer to this question is A: counter module.
Counter module in python or Python counter is a container that holds the count of each of the elements present in the container. It is a sub-class available in the dictionary class. Jamal can use this module in Python to write a program that will find the 10 most common words in Romeo and Juliet.
Other options are not correct because:
While loop: while loop only iterates its body until a specific condition is met. For loop is used to iterate to a pre-specified condition and iterate until the condition is reached. While the mean module of Python is used to calculate mean and average.
write aemail to brother for laptop for vitrual classes
Answer:
If I were to ask my brother for a laptop, I would go:
Hey, can I have your laptop? I need it for online classes.
Sincerely, [my name]
References inserted initially as footnotes can be converted to endnotes through an option in the software.
A. True
B. False
The answer is: A) True
Your manager has tasked you with implementing security controls to mitigate IP spoofing attacks against your network. IP spoofing is a method of attack that involves sending packets to a target network while hiding the attacker's address using a false source address.
What method outlined would achieve anti-spoofing, to mitigate private IP spoofing attacks against your network?
Answer:
You can setup firewall rules with for example iptables on Linux. The rules should block source addresses of private IP ranges such as 192.168.*.* and 10.*. *. * etc. Check private IP ranges for full list.
It will however not guarantee prevention of IP spoofing in general as its not possible to prevent such attacks. Its the responsibility of ISPs. But the question asked for private IP spoofing and then the above works.
A flashlight bulb uses 2.4 W of power when the current in the bulb is 0.8 A. What is the voltage difference?
Answer:
3 Volts.
Explanation:
Answer:
3 Volts
Explanation:
Because Power = Voltage x Current, so if you substitute the values into the equation, it would be :
2.4 W = Voltage x 0.8 A
Then if you rearrange the equation, it would be :
2.4 W / 0.8 A = Voltage
Which is :
3 V = Voltage
What is the benefit of encapsulation?
A. To rename variables
B. To reuse code
C. To make all members public
D. To make all members protected
Answer:
B. To reuse code
Endnotes are indicated by
A. lowercase letters (a, b, c)
B. numbers (1, 2, 3)
C. Roman numerals (i, il, ill)
D. uppercase letters (A, B, C)
They
Answer:
The answer is D because u have the uppercase letter bold
Answer:
Endnotes are actually indicated by Roman Numerals so option C is correct.
how do you keep word from trying to capitalize every isolated letter "i"
We can create tables in MS. Word from *
2 points
Insert Tab
Home Tab
Mailings Tab
Answer:
insert tab
Explanation:
hope it helps
Answer:
we can create tables in ms word from Insert table
No variables and only in one lines
In python 3.8, we can use a simple print statement.
print(('h0 '*3 +'Merry Christmas\n')*2)
Write a program with 2 separate functions which compute the GCD (Greatest Common Denominator) and the LCM (Lowest Common Multiple) of two input integers.
Answer:
The program written in Python is as follows
def GCD(num1, num2):
small = num1
if num1 > num2:
small = num2
for i in range(1, small+1):
if((num1 % i == 0) and (num2 % i == 0)):
gcd = i
print("The GCD is "+ str(gcd))
def LCM(num1,num2):
big = num2
if num1 > num2:
big = num1
while(True):
if((big % num1 == 0) and (big % num2 == 0)):
lcm = big
break
big = big+1
print("The LCM is "+ str(lcm))
print("Enter two numbers: ")
num1 = int(input(": "))
num2 = int(input(": "))
GCD(num1, num2)
LCM(num1, num2)
Explanation:
This line defines the GCD function
def GCD(num1, num2):
This line initializes variable small to num1
small = num1
This line checks if num2 is less than num1, if yes: num2 is assigned to variable small
if num1 > num2:
small = num2
The following iteration determines the GCD of num1 and num2
for i in range(1, small+1):
if((num1 % i == 0) and (num2 % i == 0)):
gcd = i
This line prints the GCD
print("The GCD is "+ str(gcd))
This line defines the LCM function
def LCM(num1,num2):
This line initializes variable big to num2
big = num2
This line checks if num1 is greater than num2, if yes: num1 is assigned to variable big
if num1 > num2:
big = num1
The following iteration continues while the LCM has not been gotten.
while(True):
This if statement determines the LCM using modulo operator
if((big % num1 == 0) and (big % num2 == 0)):
lcm = big
break
big = big+1
This line prints the LCM of the two numbers
print("The LCM is "+ str(lcm))
The main starts here
This line prompts user for two numbers
print("Enter two numbers: ")
The next two lines get user inputs
num1 = int(input(": "))
num2 = int(input(": "))
This calls the GCD function
GCD(num1, num2)
This calls the LCM function
LCM(num1, num2)
See attachment for more structured program
Write an expression that will print "in high school" if the value of user_grade is between 9 and 12 (inclusive).
In python:
if 8 < user_grade < 13:
print("in high school")
You would just need to supply the value of the user_grade variable.
Discuss the advantages and disadvantages of artificial intelligence ?
50word
Answer:
it'll be in points okay.
Explanation:
1. It's a blessing as well as a curse.
2. It changed lives.
3. Helped understand things better.
4. Development.
5. Free knowledge e.g. Brainly
;)
Explanation:
Kxkxkdkeeksldowowowkscoviforkeooododosowkwmdndmdmrnrnrmrmfododoo ododosososxkxkdldldldllwlwwlel ododoeldl ldldldlxl odododo oodoxxoo
Which of the following server types is in the form of a single circuit board?
a. blade
b. tower
O c. rack
O d. dedicated
o
Answer:
A. Blade
Explanation:
Server Blade means a complete computer system on a single board which includes one or more CPUs, memory, operating system, network connections, and typically includes access to hard drives or other mass storage devices. A Server Blade is designed to be inserted into a space-saving rack, and each rack may contain a number of Server Blades served by one or more power supplies.
If this is multiple choice, a dedicated server can be too.
Which software programs should students avoid using to create and submit course work? (Choose all that apply). Word, Pages, Numbers, Keynote
Answer:
tyafana
Explan
ation:n umbers
so i am on a Chromebook with headphones , and I am wondering if you can make it that a tab only play sound on one side of the headphones and other tabs to the other side of the headphones
No you cannot do that with a single pair of headphones. If you had an dual aux split... you could plug in two pairs of headphones... even if you had two bluetooth pairs I don't think it'd be possible... What do you need to do that for? Maybe I can help find an alternative solution
Computer Architecture
1. Define what a "word" is in computer architecture:
A. The size (number of bits) of the address
B. The total number of bits of an instruction (e.g. 16 bits)
C. Word and width are synonymous.
D. A word is the contents of a memory register.
2. What is the difference between a register’s width and a register’s address? (choose all that apply - there may be more than one correct answer)
A. They are both the same!
B. Address is the same for all registers, width is unique for each register.
C. Width is the amount of data a single register holds, address is the location of the register within a larger chip.
D. The address bits of a register is a logarithm of its width.
3. Which of the following is NOT implemented by the Program Counter?
A. Set the counter to 0.
B. Increase the counter by 1.
C. Decrease the counter by 1.
D. Set the counter to any input value.
4. What is the relationship between the size of the address (number of bits) and the word size for memory registers?
A. address bits = 2^(word size)
B. address bits = word size ^ 2
C. address bits = word size
D. address bits = log2(word size)
E. address bits = (word size) / 2
Answer:
BADDA
Explanation:
BIIING
What was that show where lowe’s were based off eye colors and the main character had orange eyes that let her mind control people. It was either on netflix or hulu
Answer:Raising Dion?
Explanation:
Was it Raising Dion?