Answer:
Questions (three) that can be used to decide whether a website's information is trustworthy are;
1) Who is or are the authors of the website
2) What type of information the website conveys
3) Why was the information published on a website
Explanation:
1) Who is or are the authors of the contents of the website including the authors credentials so as to ascertain whether the author is qualified with regards to the topic or topics written about on the website
2) What are the information presented on the website and the context the in which the information are presented
Are the articles in the website backed by a source, with hyperlinks, references or footnotes
3) Why was the on the website information created. Is the information to entertain, persuade, sell or inform
Don't Answer if you are going to give me a link! Don't Waste My Points!
An image is considered a portrait if the person is looking into the camera lens.
A.
True
B.
False
Answer:
Hello there! :) It could be considered a portrait but that is not exactly what a portrait is.
Explanation:
A portrait is mostly considered a painting or drawing of someone that that same person has drawn. For example, a portrait of the Mona Lisa would have been her drawing/painting herself. Now someone just looking at camera lens would'nt exactly be true, it would be false so the answer is B. False
Hope this helps!
Answer: False
Explanation: I don't know 100%, but it wouldn't make sense if it was because the person can be really far away and still be looking at camera, as well as be looking slightly away from lens and it still look like a portrait.
To print preview a document, navigate to the _____ tab and select the Print option. File Page Design View Insert
Answer:
Option A
Explanation:
The process of viewing the print preview option in MS word is as follows -
a) First of all click on the File tab
b) After clicking on file tab, click on the print button at the left hand side
c) In the new tab that open up after clicking on the print button will provide an option of print preview.
Hence, option A is correct
Answer:
b. page layout
Explanation:
does trend in computing important for organization management?
Answer:
yes it is...................
draw a flowchart to input a number and find out whether it is divisible by 7 or not
Note:
% is Modulus,
So it's taken as num mod 7, if that evaluates to 0 there is no reminder therefore divisible by 7.
Where is information stored in the computer?
Answer:
files
Explanation:
data is stored in files
Write a C program to insert and delete values from a stack(to perform pop and push operations) using an array data structure
#include<stdio.h>
// Method to insert a value into a stack
void push(char value, char myStack[], int *top, int sizeOfStack){
if(*top == -1){
myStack[sizeOfStack - 1] = value;
*top = sizeOfStack - 1;
}
else if(*top == 0){
printf("Stack is full. \n");
}
else{
myStack[(*top) - 1] = value;
(*top)--;
}
}
//Method to remove a value from a stack
void pop(char myStack[], int *top, int sizeOfStack){
if(*top == -1){
printf("Stack is empty. \n");
}
else{
printf("Value removed: %c \n", myStack[(*top)]);
// Now if the value removed was the last value in the stack
// you should set top to -1.
// This would show that the stack is now empty
if((*top) == sizeOfStack - 1){
(*top) = -1;
}
else{
(*top)++;
}
}
}
//Method to test the pop and push methods
int main() {
//variable to hold the size of stack
int sizeOfStack = 6;
//create the stack
char myStack[sizeOfStack];
//set the top to -1
//this is to show that the stack is initially empty
int top = -1;
//insert a value tot the stack
push('x', myStack, &top, sizeOfStack);
//print the value on the top
printf("Value on top of stack: %c\n", myStack[top]);
//insert another value to the stack
push('y',myStack, &top, sizeOfStack);
//print the value on the top of the stack
printf("Value on top of stack: %c\n", myStack[top]);
//insert another value to the stack
push('z',myStack, &top, sizeOfStack);
//print the value on the top of the stack
printf("Value on top of stack: %c\n", myStack[top]);
//remove the last inserted value
pop(myStack, &top, sizeOfStack);
//print the value on the top of the stack
printf("Value on top of stack: %c\n", myStack[top]);
//remove another value
pop(myStack, &top, sizeOfStack);
//print the value on the top of the stack
printf("Value on top of stack: %c\n", myStack[top]);
return 0;
}
Sample Output:Value on top of stack: x
Value on top of stack: y
Value on top of stack: z
Value removed: z
Value on top of stack: y
Value removed: y
Value on top of stack: x
Explanation:The code above has been written in c and it contains comments explaining important parts of the code. Please go through the comments.
It also contains a sample output resulting from the run of the program.
Please can anyone write an algorithm
Answer:
The algorithm is as follows:
1. Start
2. Total = 0
3. For days = 0 to 4
3.1 Input Minutes
3.2 Total = Total + Minutes
3.4 Output Total
4. Stop
Explanation:
This starts the algorithm
1. Start
This initializes counter to 0
2. Total = 0
This iterates from day 0 to day 4
3. For days = 0 to 4
This inputs the minutes played for each day
3.1 Input Minutes
This sums up the minutes played for each day
3.2 Total = Total + Minutes
This prints the cumulated minutes for all 5 days
3.4 Output Total
This stops the algorithm
4. Stop
What are some common summary operations that aggregate functions can perform in a crosstab query? Check all that apply.
adding
counting
dividing
subtracting
identifying an average
calculating a minimum or maximum
predicting the next value in a pattern.
Answer:
adding
counting
identifying average
calculating max or min
Explanation:
edg 2021
what is data? why is it important to collect data ? explain the points.
Answer:
so i dont know if u mean like science or math but like there similar. so data is the results and information you get when you do experiments. It is important to collect it so it can back up your reasons and points. It also helps us advance and become smarter.
Explanation:
The decimal equivalent of the product of 1011 and 1100 is
Answer:
132
Explanation:
We convert each number to base 10 (decimal) and multiply.
So 1011₂ = 1 × 2³ + 0 × 2² + 1 × 2¹ + 1 × 2⁰
= 1 × 8 + 0 × 4 + 1 × 2 + 1 × 1
= 8 + 0 + 2 + 1
= 11₁₀
1100₂ = 1 × 2³ + 1 × 2² + 0 × 2¹ + 0 × 2⁰
= 1 × 8 + 1 × 4 + 0 × 2 + 0 × 1
= 8 + 4 + 0 + 0
= 12₁₀
So, 1011₂ × 1100₂ = 11₁₀ × 12₁₀ = 132₁₀
So, the decimal equivalent of the product of 1011 and 1100 is 132
What market was technology designed to appeal to?
Answer:
Explanation: Technology has transformed marketing by making campaigns more personalized and immersive for people and creating ecosystems that are more integrated and targeted for marketers. And it's not just the interface between brands and people that have been transformed.
PI
s
ne
poem for the
During reading: Work
on the following questions:
suggests
I
a
1
b
What do you predict the poem will be about?
How does the shape support what the titles
How many stanzas does the poem have?
b How many sentences does it have?
3 Read the poem aloud in your group.
2
a
m
Until I saw the Sea by Lilian Moore
ou the Sea
Explanation:
As the qn was copy pasted from another document...the qn seems incorrect... and incomplete..
pls see to it and attach the correct qn...
sorry
What is a circuit breaker and how is it different from a fuse? Why do we need these two different devices?
DO NOT PLAGARIZE!
Answer:
Circuit breakers and fuses both have the same purpose, but a fuse will melt when stopping electricity where as circuit breakers can just be reset. You need both devices in order to stop a overload of power that could fry your electronics or worse, start fires.
Explanation:
7. What is a slide transition?
Answer:
Is this multiple choice? If not, its a visual effect from one slide to another.
Explanation:
Answer:
A slide transition is the visual effect that occurs when you move from one slide to the next during a presentation. You can control the speed, add sound, and customize the look of transition effects
Explanation:
hope this helps:)
which statement about routers is !!!FALSE!!!
a. they (routers) put packets in the right order after they arrive at their destination
b. they are located at the intersections of the network of wires and cables that make up the internet.
c. they check the address on each packet that arrives and decide which way it should go next
Answer:
b. they are located at the intersections of the network of wires and cables that make up the internet.
Explanation:
Given that Router is a computer networking device that operates by transferring data packets between computer networks, while also ensuring traffic organizing tasks on the Internet.
Hence, Routers put packets in the right order after they arrive at their destination by matching the destination IP address of the packet and one of the addresses in the routing table.
Also, Routers check the address on each packet that arrives and decide which way it should go next by ensuring the data packets are summarized for the outgoing interface recorded in the table entry.
Therefore, the correct answer is option B
write an algorithm to print the natural numbers from 1 to 15
Answer:
1. n = [ ]
2. i = 0
3. j = i + 1
4. i = j
5. append i to n
6. Repeat 3 to 5
7. Stop when i = 15
List 5 general safety precautions that you can take when working with a computer equipment.
Answer:
Wear the right clothes, unplug all equipment, keep your work area clean, check for damaged parts, and do not force components into ports.
Explanation:
These are all general safety precautions when working with computer equipment.
Dose anybody know how to do this because i dont.
Answer:
All you need to explain in this assignment is specific things which makes a product an innovationi or new. This is what emerging means in the first question. Then say why these new technologies can be hard to identitfy.
Explanation:
What value is returned by the call mystery(2, 3, 6)?
answer choices:
9
10
14
8
20
Answer:
8888888888888888888888888888Explanation:
yyugjhgfgdsfsghgtredfzgxhcjvkiu
does trend in computing important for organization management?explain
Answer:
Yes
Explanation:
Trend analysis can improve your business by helping you identify areas with your organisation that are doing well, as well as areas that are not doing well. In this way it provides valuable evidence to help inform better decision making around your longer-term strategy as well as ways to futureproof your business.
Dar un ejemplo en donde se puede aplicar lista multinivel y nombrar los botones que nos permiten cambiar de un nivel al otro
Answer:
Microsoft word and power point
Explanation:
In a Microsoft Word you can make multilevel list and can select different theme and name the buttons to make the customization. Similarly in Microsoft Power Point you can make multilevel list and customize it by Home tab in paragraph group, there are many options to add your customization level.
The First National Bank debited $100.00 from your checking account into your savings account. What would the transaction descripton be?
Answer:
32 Day Interest Plus
Amount 1 - 32 days (per annum) 33 - 64 days (per annum)
R1 000 - R9 999 0.55% 0.65%
R10 000 - R24 999 0.80% 0.90%
R25 000 - R49 999 1.05% 1.15%
R50 000 - R99 999 1.55% 1.65%
Explanation:
WHERE THE SMART PEOPLE AT??????
PLEASE I NEED HELP
THIS IS MY LAST QUESTION FOR THE TEST
PLEASE
I KNOW THE ANSWER IM JUST MAKING SURE
You can use tables for layout work. However, in XHTML, each form control should have its own ______ element
a. method
b. textarea
c. label
d. fieldset
Answer:
I would say A. Method
Explanation:
.
The National Archives is part of the federal government, which means that its content:
-belongs to everyone.
-is off limits to the public.
-comes with extreme licensing fees.
-is outdated and useless.
Answer:
belongs to everyone.
Explanation:
A National Archive can be defined as the collection of data (informations) and documents by the government of a particular country for record keeping purposes.
Basically, these documents comprises of information about important and historical events that have happened in the country or events generally related with the country.
Hence, the National Archives is part of the federal government, which means that its content belongs to everyone. This is simply because the federal government is a government of the people, for the people and by the people. Thus, the ownership of governmental institutions or agencies belongs to the general public i.e the citizens of the country.
Choose the correct color to complete the sentence.
It is generally understood that
Blank is the best color choice for a global audience.
Answer:blue is the best color choice for a global audience.
___ design uses the same webpage content, but applies styling depending on the viewport size of the device
In most software programs, which color arrows selects the points in a vector
Black
White
Gray
Red
Answer:
in think gray is used as arrow color which selects the points in a vector
P16 Consider the following network. ISP B provides national backbone service to regional ISP A. ISP C provides national backbone service to regional ISP D. Each ISP consists of one AS. B and C peer with each other in two places using BGP. Consider traffic going from A to D. B would prefer to hand that traffic over to C on the West Coast (so that C would have to absorb the cost of carrying the traffic cross-country), while C would prefer to get the traffic via its East Coast peering point with B (so that B would have carried the traffic across the country). What BGP mechanism might C use, so that B would hand over A-to-D traffic at its East Coast peering point?
Solution :
Considering the following data :
[tex]$\text{ISP B}$[/tex] provides the national backbone to the regional [tex]$\text{ISP A}$[/tex].
[tex]$\text{ISP C}$[/tex] provides the national backbone to the regional [tex]$\text{ISP D}$[/tex].
Each of the ISP consists of one autonomous systems (AS).
[tex]$\text{ISP B}$[/tex] would like to hand over the traffic of C through the [tex]$\text{West}$[/tex] Coast.
The [tex]$\text{ISP C}$[/tex] would like to receive traffic from B's peering point via East Coast.
One way for [tex]$C$[/tex] to force [tex]$B$[/tex] to hand over all of [tex]$B$[/tex]’s traffic to [tex]$D$[/tex] on the east coast is for [tex]$C$[/tex] to only advertise its route to [tex]$D$[/tex] via its east coast peering point with [tex]$C$[/tex].
The following if statement tests the rainfall in New York’s Central Park during the months of June, July and August.
if (low <= rain && rain <= high)
System.out.println("Rainfall amount is normal.");
else
System.out.println("Rainfall amount is abnormal.");
It could be replaced with:
I.
if (rain >= low)
{
if (rain <= high)
System.out.println("Rainfall amount is normal.");
}
else
System.out.println("Rainfall amount is abnormal.");
II.
if (rain >= low)
{
if (rain <= high)
System.out.println("Rainfall amount is normal.");
else
System.out.println("Rainfall amount is abnormal.");
}
else
System.out.println("Rainfall amount is abnormal.");
III.
if (rain >= low)
System.out.println("Rainfall amount is normal.");
else if (rain <= high)
System.out.println("Rainfall amount is normal.");
else
System.out.println("Rainfall amount is abnormal.");
I only
II only
III only
(II or III)
I, II or III
Answer:
II only
Explanation:
In the original code, both conditions of low<=rain and rain >= high must be met for the print message to be executed. This is denoted by the && logical operator.
The code in II does the same thing. It first checks that the low <=rain condition is true; then it goes on to check if the rain >= high condition is true as well before the "normal" print statement can be executed. But if either of the condition is not true, it prints "abnormal" because both conditions must be true.
Ian’s photography teacher asks him to take some photos of a few different species over the weekend. Which group of photos would MOST LIKELY get Ian a good grade if he turned them in?
A.
pictures of a lion, tiger, and leopard from his visit to the zoo
B.
pictures of Ian’s backyard, a birdhouse, and the river behind the school
C.
pictures of Ian’s golden retriever playing with the neighbor’s puppy
D.
pictures of a mother bird feeding her baby chicks in a nest