Lisa earns $215.20 a week. She is married and claims 3 allowances. Starting next week she will receive a $40 per week raise. After the raise, how much will she pay in federal income taxes Annually?

Pie charts are used to compare parts of a whole, not the difference between groups. This misleads the viewer to think more than half the people in all three parties voted Yes on Issue #1, when less than half of Republicans and Independents actually voted Yes on Issue #1.

This is a type of graph that resembles a pie because it is a circle that shows the proportion of different groups.

Note: Here is the missing information

Learn more about pie charts in https://brainly.com/question/24207368

#SPJ1

Answer:

50 m

Step-by-step explanation:

The angle of elevation of the top of the building from the foot of the tower is 30 and the angle of the top of the tower from the foot of the building is 60. the tower is 50 m high

The instrument used here is a protractor.

An instrument used to measure angles in degrees is a protractor. When measuring angles using a protractor, it's crucial to check that the vertex of the angle is in the protractor's centre and that the angle's base is lined up with the protractor's baseline.

Acute Angle: - An angle that is less than 90 degrees is considered to be acute. For instance, if the angle is 30 degrees, we would line up the vertex of the angle with the protractor's centre and one of its sides with the baseline. The measurement would be read off the protractor scale, which in this instance would be 30 degrees.

Right Angle: - A right angle is a triangle with a 90 degree angle on each side. Using a protractor, we would line up the vertex of the angle with the protractor's centre and one side of the angle with the baseline to measure a right angle. The measurement would be read off the protractor scale, which in this instance would be 90 degrees.

Obtuse Angle: - An angle that is more acute than 90 degrees is referred to as an obtuse angle. When using a protractor to measure an obtuse angle, we would line up the vertex of the angle with the protractor's centre and one side of the angle with the baseline. The measurement would then be taken from the protractor scale and would be more than 90 degrees in this instance.

Straight Angle: - A straight angle is one that is 180 degrees in length. Using a protractor, we would line up the vertex of the angle with the protractor's centre and one side of the angle with the baseline to measure a straight angle. The measurement would then be taken from the protractor scale, which would be 180 degrees in this instance.

To know more about protractors on brainly : brainly.com/question/1675387

#SPJ4

Answer:

see below

Step-by-step explanation:

1-1-2017

H 26K

W 24K

Net income 30K

H salary 12K

W salary 10K

remain: 8K shared EQUALLY so each gets 4K extra

Distribution:

30K - H gets12+4 =16K, and W gets 10+4 = 14K

Help

HELP
HELP
HELP
HELP
HELP
HELP
HELP
HELP
HELP

Answer:

[tex]\textsf{a)} \quad K(t)=1500(1.12)^t[/tex]

b)  44940

c)  57.4 days

Step-by-step explanation:

Exponential Growth Function

[tex]f(t)=a(1+r)^t[/tex]

where:

Given values:

To create a function K(t) that expresses the number of users t days after the start of the year, substitute the given values into the exponential growth formula:

[tex]\implies K(t)=1500(1+0.12)^t[/tex]

[tex]\implies K(t)=1500(1.12)^t[/tex]

To calculate how many users there are after 30 days, substitute t = 30 into the function K(t) from part a:

[tex]\implies K(30)=1500(1.12)^{30}[/tex]

[tex]\implies K(30)=44939.8831...[/tex]

[tex]\implies K(30)=44940\; \rm users[/tex]

To calculate after how many days it takes to reach one million users, substitute K(t) = 1,000,000 into the function and solve for t:

[tex]\implies 1000000=1500(1.12)^t[/tex]

[tex]\implies \dfrac{2000}{3}=1.12^t[/tex]

[tex]\implies \ln \left(\dfrac{2000}{3}\right)=\ln 1.12^t[/tex]

[tex]\implies \ln \left(\dfrac{2000}{3}\right)=t \ln 1.12[/tex]

[tex]\implies t=\dfrac{\ln \left(\frac{2000}{3}\right)}{\ln 1.12}[/tex]

[tex]\implies t=57.3755016...[/tex]

[tex]\implies t=57.4\; \rm days[/tex]

Answer: 6 2/5

Step-by-step explanation:

32 divided by 5 equals 6 with a remainder of 2.

∑[tex](k^2)[/tex] for k = 1 to 6 is the sum in sigma notation for this series of terms.

The series is 1 + 4 + 9 + 16 + 25 + 36. The lower limit of summation is 1, which means, the sum starts at the initial term in the series.

The index of summation is k, which implies, the ongoing term in the series is represented by the variable k.

In the expression [tex]k^2[/tex]  which implies that we are adding up the square of the index of summation.

So, the sigma notation for this series of terms is ∑[tex](k^2)[/tex]  for k = 1 to 6, which means, we are adding up the squares of the numbers from 1 to 6 (1, 4, 9, 16, 25, and 36)

To learn more about the sigma notation:

https://brainly.com/question/26243301

#SPJ4

The mean of the sample is the random variable in the given problem.

The mean of any given data set can be defined as summarizing a given group of data. It is done in order to make data sets and their values easier to understand. It can be obtained by first adding all the given values and then dividing the total sum by the number of data entries.

A random variable is any quantity that depends on random events. Here, we know that the mean of the given sample depends on all of the random events or we can say random values present in the table. Hence, we can conclude that the random variable is the mean of the sample.

Learn more about the mean on

https://brainly.com/question/30112112?referrer=searchResults

#SPJ4

Answer: Semi-Conservative, and old.

Step-by-step explanation:

The required constant of proportionality for the relationship is 1/2.

As an illustration, we may write y = kx, where x is the amount of gas in gallons, y is the price in dollars, and k is the proportionality constant. In other words, the cost is directly related to the number of gallons pumped.

Let the relation between x and y is

y = kx

Where k is proportionality constant.

Using the given values of x ad y

1 = k(2)

k = 1/2

So, the constant of proportionality for the relationship is 1/2.

To know more about  Proportionality visit:

brainly.com/question/29126727

#SPJ1

a. The solutions to the system of equations f(x) = g(x) are given as follows: x = 0 and x = 1.

b. The explanation is that they have the same numeric value at these values of x.

A system of equations is composed by multiple equations.

The solution to the system of equations is the point of intersection of all these equations, which happen when all these equations have the same numeric value.

More can be learned about a system of equations at https://brainly.com/question/13729904

#SPJ1

The flagpole is visible to the student from 18 feet away and at a 22-degree inclination to the ground. The flagpole is 40.3 feet tall and 50 feet away from the structure.

At an elevation of 22 degrees, the student is looking out of a second-story school window. The building is 50 feet from the flagpole's base, and the window is 18 feet above the ground. We may compute the angle of the triangle formed by the window, the ground, and the top of the flagpole using the tangent ratio to determine its height. The opposing side (the flagpole) divided by the neighboring side equals the tangent of 22 degrees (the window to the ground). Consequently, the flagpole is 40.3 feet tall (50 divided by 1.224). This indicates that the student is 18 feet above the ground and is looking down at the flagpole.

Learn more about feet here

https://brainly.com/question/29972990

#SPJ4

The maximum possible number of points where two polygons can intersect is [tex]$n = 4$[/tex]. This is achieved when the two polygons are tangent to each other at four points.

There are different ways to approach the problem of determining the maximum possible number of points where two polygons can intersect, but one possible method is to use geometric principles and constructive examples. Here is one possible way to do it:

This is a constructive example for showing that the maximum possible number of intersection points between heptagon and hexagon is 4.

Learn more about Maximum Intersection Point Count here:

https://brainly.com/question/23762887

#SPJ4

The required mean and standard deviation of the frequency distribution of weights is 160.10 and 11.94 respectively.

Statistic is the study of mathematics that deals with relations between comprehensive data.

Here,
From the table,
Mean = ∑fx / ∑f
Mean = 16010 / 100
Mean = 160.10

Standard deviation,
σ = √∑fd²/∑f
σ = √14265/100
σ = 11.94

The required range of weights from one standard deviation, below the mean is given as
= 160.10 - 11.94 ≤ mean

Thus, the required mean and standard deviation of the frequency distribution of weights is 160.10 and 11.94 respectively.

Learn more about Statistics here:
https://brainly.com/question/23091366

#SPJ1

My student ID is 21444367.

The algorithm states that if the digit in the student ID (from left to right) is an even number, then a 0 is placed in the s column in the corresponding row (from top to bottom). If the digit in the student ID (from left to right) is an odd number, then a 1 is placed in the s column in the corresponding row (from top to bottom). Thus, the result of the algorithm applied to my student ID is s = 01101000.

This can be calculated by multiplying the even digits of the student ID by 0 and the odd digits of the student ID by 1 and then adding them together.

For my student ID, 21444367, the calculation would be:

0 * 2 + 1 * 1 + 0 * 4 + 1 * 4 + 0 * 4 + 1 * 3 + 0 * 6 + 1 * 7 = 01101000.

Learn more about algorithm here:

https://brainly.com/question/29289479

#SPJ4

The distance of IH is 1.089 meters.

Circle is a two dimensional figure which consist of set of all the points which are at equal distance from a point which is fixed called the center of the circle.

Given that,

Radius = 5.1 meters

EF = EI = 5.1

FG = 6.3 meters

HE is a perpendicular bisector of FG.

FH = HG = 6.3 / 2 = 3.15

Also, FH is the projection of EF in the vertical axis.

FH = EF sin (θ), where θ is the angle FEH.

3.15 = 5.1 sin (θ)

sin (θ) = 0.6176

θ = sin⁻¹ (0.6176)

θ = 38.14°

IH = EI - EH

We have,  EH is the projection of EF into the horizontal axis.

EH = EF cos (θ)

Substituting,

IH = 5.1 -  EF cos (θ)

IH = 5.1 - 5.1 cos (38.14)

IH = 5.1 ( 1 - cos (38.14))

IH = 1.089 meters

Hence the length of the line segment IH is 1.089 meters.

Learn more about Circles here :

https://brainly.com/question/29142813

#SPJ1

The size of the payments that need to be made today and in six months are both $ 6, 961.69.

To find the payment that Caitlin needs to make today and in six months, assume this amount of x.

The payment in 6 months would be:

= (13, 000 - x) ( 1 + 2.4 / 100)⁶

The payment today would be x.

Equate them to find the payment:

x = (13, 000 - x) ( 1 + 2.4 / 100)⁶

x = 14, 988 - 1.1529x

x = 14, 987.979 / 2.1529

= $ 6, 961.69

Find out more on payments at https://brainly.com/question/29321249

#SPJ1

Commence at the beginning. The x-coordinate is Negative 3 and 12 units, thus move 3 and 12 units to the right. The difference between 3 and 4 is negative three-half.

A point's exact location on a two-dimensional plane is determined by a pair of numbers called its coordinates. The x and y axes, which are two axes that are at right angles to one another, are known as the coordinate plane's axes. How far along each axis a specific point is located is indicated by its coordinates.

Ordered pairs are a way of describing locations on the coordinate plane. A point's location is revealed by an ordered pair by linking the point's positions along the x-axis (the ordered pair's first value) and the y-axis (the second value of the ordered pair).

To locate points, one uses the numbers on a coordinate grid. Using an ordered pair of numbers, each point may be located.

To learn more about coordinate refer to:

https://brainly.com/question/16634867

#SPJ1

0.1920 mL of the anesthetic should be given to the patient.

First, we need to convert the patient's weight from kilograms to pounds:

58 kg x 2.20462 lb/kg = 128.01 lbs

Next, we can calculate the total amount of anesthetic to be given to the patient:

15 mg/10 lbs x 128.01 lbs = 19.20 mg

Finally, we can divide the total amount of anesthetic by the concentration of the anesthetic in each mL:

19.20 mg / 100 mg/mL = 0.1920 mL

So, 0.1920 mL of the anesthetic should be given to the patient.

Learn more on Calculation of Dosage: https://brainly.com/question/29056148

#SPJ1

The sampling method that was used. three representatives from each employee type (faculty, staff, administrators) are chosen for a salary committee. This uses stratified sampling.

In a stratified sample, researchers divide a population into homogeneous subpopulations called strata (the plural of stratum) based on specific characteristics (e.g., race, gender identity, location, etc.). Every member of the population studied should be in exactly one stratum.

Each stratum is then sampled using another probability sampling method, such as cluster sampling or simple random sampling, allowing researchers to estimate statistical measures for each sub-population.

Researchers rely on stratified sampling when a population’s characteristics are diverse and they want to ensure that every characteristic is properly represented in the sample. This helps with the generalizability and validity of the study, as well as avoiding research biases like under coverage bias.

Learn more about Stratified random sampling at

https://brainly.com/question/15604044.

#SPJ4

The work energy theorem represented as an equation is ΔW = ΔΕ is appropriate option.

Option D is correct.

A fundamental physics principle known as the work-energy theorem asserts that the amount of work done to an object is proportional to the change in its kinetic energy. To put it another way, the kinetic energy of an object is proportional to the net work done to it.

The work-energy theorem can be expressed as an equation because the change in an object's kinetic energy (W) is equal to the change in its work (W). It states that a change in an object's kinetic energy equals the net work done on it. The conservation of energy is a fundamental physics principle that states that energy cannot be created or destroyed; rather, it can only be transferred or converted from one form to another.

Learn more about work energy theorem:

brainly.com/question/10063455

#SPJ1

Answer:

x=16

Step-by-step explanation:

x/2=5+3

x/2=8

x=8×2

x=16

The graph can be used to determine the median, quartiles, and other statistical measures.

(a). Class width = (maximum value - minimum value)/ number of classes = (109 - 45)/6 = 9

(b).

Class Limits  Class Boundaries Midpoints  Frequencies  Relative Frequencies  Cumulative Frequencies

45 - 54  44.5 - 54.5  49.5  2  0.0741  2

55 - 64  54.5 - 64.5  59.5  7  0.2593  9

65 - 74  64.5 - 74.5  69.5  17  0.6207  26

75 - 84  74.5 - 84.5  79.5  20  0.7407  46

85 - 94  84.5 - 94.5  89.5  14  0.5185  60

95 - 104  94.5 - 104.5  99.5  7  0.2593  67

(c). Histogram

(d). Relative-Frequency Histogram

(e). The basic distribution shape is right-skewed.

(f). Ogive

The ogive graph is a cumulative frequency plot that shows the number of data values that lie at or below each given value on the x-axis. It is constructed by plotting the cumulative frequencies of each data value on the y-axis against the corresponding data values on the x-axis. The points are then connected using closed line segments to form the ogive graph. The graph can be used to determine the median, quartiles, and other statistical measures.

Learn more about median here:

https://brainly.com/question/28060453

#SPJ4

It is very important to note that this property is only valid for addition and multiplication. If, AC = AB + BC, then AB + BC = AC by the commutative property.

According to the commutative property, a mathematical principle, the product will not be affected by the order in which we multiply the integers. The commutative property of addition states that the sum is unaffected by the order of the addends.

Only addition and multiplication processes can use the commutative property. So, when adding or multiplying any two integers, we can swap the numbers around or modify their order. This is one of the fundamental characteristics of integers.

Adjective. involving, pertaining to, or involving commutation, exchange, substitution, or interchange. Mathematics. Commutative law for multiplication makes reference to the binary operation's property that one term working on another is equal to another term operating on the first, as in a + b = b a.

To learn more about commutative property refer to  :

https://brainly.com/question/778086

#SPJ1

Answer:

$17.32

Step-by-step explanation:

44 hours

52.5 - 44 = 8.5 hours over time for 1.5x regular pay

assume regular pay is x

so 44x + 8.5 * 1.5x =983.15

44x + 12.75x = 983.15

56.75x=983.15

x=17.324

check to see if it's correct

44*17.324 + 12.75*17.324 = 983.14

Answer:

a)  Growth rate of 2.737% (3 d.p.) per year

b)  117,897

Step-by-step explanation:

[tex]\boxed{\begin{minipage}{9 cm}\underline{General form of an Exponential Function with base $e$}\\\\$f(t)=ae^{rt}$\\\\where:\\\phantom{ww}$\bullet$ $a$ is the initial value ($y$-intercept). \\ \phantom{ww}$\bullet$ $e$ is Euler's number. \\ \phantom{ww}$\bullet$ $r$ is the continuous growth/decay rate.\\ \phantom{ww}$\bullet$ $t$ is time.\\\end{minipage}}[/tex]

If a > 0 and r > 0, the function is an exponential growth function.

If a > 0 and r < 0, the function is an exponential decay function.

Given exponential function:

[tex]P(t) = 90000\cdot e^{0.027t}[/tex]

As r > 0 the function is an exponential growth function.

The annual growth rate is:

[tex]\begin{aligned}\textsf{Annual growth rate}& = e^{0.027}-1\\&=1.02736780...-1\\&=0.0273678027...\\&=2.73678027...\%\\&=2.737\%\; \sf (3\;d.p.)\end{aligned}[/tex]

To calculate how many residents the model predicts will live in Asheville, NC in 2030, substitute t = 10 into the given function:

[tex]\begin{aligned}\implies P(10) &= 90000\cdot e^{0.027 \cdot 10}\\&= 90000\cdot e^{0.27}\\ &= 90000\cdot 1.30996445...\\&=117896.800...\\&=117897\; \sf (nearest\;whole\;number)\\\end{aligned}[/tex]

Therefore, the model predicts that there will be a population of approximately 117,897 living in Asheville, NC in 2030.

The area of a triangular prism with dimensions of 13ft, 5 ft, & 12 ft, and 6 ft will be 240 square feet.

Let h be the height and b be the base of the triangle. Let L₁, L₂, and L₃ be the length and W be the width of the rectangle.

Then the surface area of the triangular prism will be

Surface area = 2 Area of triangle + 3 Area of rectangle

Surface area = (h x b) + (L₁ + L₂ + L₃) x W

The dimension of the triangle is 13 feet, 5 feet, and 12 feet. And the width of the rectangle is 6 feet.

The surface area of the triangular prism will be given as,

Surface area = 5 x 12 + (5 + 12 + 13) x 6

Surface area = 60 + 180

Surface area = 240 square feet

The area of a triangular prism with dimensions of 13ft, 5 ft, & 12 ft, and 6 ft will be 240 square feet.

More about the surface area of a triangular prism link is given below.

https://brainly.com/question/16765719

#SPJ1

The two functions such that composition (fog) (x) = H(x) are f(x) = 7x and g(x) = [tex]\sqrt{x-3}[/tex].

A function is a relation from a set A to a set B where the elements in set A only maps to one and only one image in set B. No elements in set A has more than one image in set B.

We have a function H(x) = 7 [tex]\sqrt{x-3}[/tex]

We have to find two functions f and g such that (fog) (x) = H(x).

Let f(x) = 7x

g(x) = [tex]\sqrt{x-3}[/tex]

The composition of these functions is,

(fog)(x) = f (g(x))

           = 7 . g(x)

           = 7 [tex]\sqrt{x-3}[/tex]

           = H(x)

Hence the functions are f(x) = 7x and g(x) = [tex]\sqrt{x-3}[/tex].

Learn more about Functions here :

https://brainly.com/question/12431044

#SPJ1