Answer:
ΔV = -2.1 L
Explanation:
To solve this exercise we can use the ideal gas equation for two points
PV = nRT
P₁V₁ = P₂ V₂
where point 1 is on the surface and point 2 is at the desired depth,
V₂ = [tex]\frac{P_1}{P_2} \ V_1[/tex]
let's calculate
V₂ = ( [tex]\frac{1 atm}{2.5 atm}[/tex] ) 3.5 L
V₂ = 1.4 L
this is the new volume, the change in volume is
ΔV = V₂ -V₁
ΔV = 1.4-3.5
ΔV = -2.1 L
This is one popular brand of exercise machine for a crossword puzzle
Answer:
Aerobics I think.
Explanation:
We know that there is a relationship between work and mechanical energy change. Whenever work is done upon an object by an external force (or non-conservative force), there will be a change in the total mechanical energy of the object. If only internal forces are doing work then there is no change in the total amount of mechanical energy. The total mechanical energy is said to be conserved. Think of a real-life situation where we make use of this conservation of mechanical energy (where we can neglect external forces for the most part). Describe your example and speak to both the kinetic and potential energy of the motion.
Answer:
* roller skates and ice skates.
* roller coaster
Explanation:
One of the best examples for this situation is when we are skating, in the initial part we must create work with a force, it compensates to move, after this the external force stops working and we continue movements with kinetic energy, if there are some ramps, we can going up, where the kinetic energy is transformed into potential energy and when going down again it is transformed into kinetic energy. This is true for both roller skates and ice skates.
Another example is the roller coaster, in this case the motor creates work to increase the energy of the car by raising it, when it reaches the top the motor is disconnected, and all the movement is carried out with changes in kinetic and potential energy. In the upper part the energy is almost all potential, it only has the kinetic energy necessary to continue the movement and in the lower part it is all kinetic; At the end of the tour, the brakes are applied that bring about the non-conservative forces that decrease the mechanical energy, transforming it into heat.
a toy of mass 600 is whirled by a child in a horizontal circle using a string of length 2m with a linear speed of 5 m/s determine the angular velocity of the toy?
Explanation:
angular velocity = velocity/radius
= 5/2
= 2.5 rad/s
Difference between on pitch and frequency
Answer:
A high pitch sound corresponds to a high frequency sound wave and a low pitch sound corresponds to a low frequency sound wave. I hope I got it correct !!
In the legend of William Tell, Tell is forced to shoot an apple from his son's head for failing to show respect to a high official. In our case, let's say Tell stands 8.7 meters from his son while shooting. The speed of the 144-g arrow just before it strikes the apple is 20.4 m/s, and at the time of impact it is traveling horizontally. If the arrow sticks in the apple and the arrow/apple combination strikes the ground 8 m behind the son's feet, how massive was the apple
Answer:
M = 0.31 kg
Explanation:
This exercise must be done in parts, let's start by finding the speed of the set arrow plus apple, for this we define a system formed by the arrow and the apple, therefore the forces during the collision are internal and the moment is conserved
let's use m for the mass of the arrow with velocity v₁ = 20.4 m / s and M for the mass of the apple
initial instant. Just before the crash
p₀ = m v₁ + M 0
instant fianl. Right after the crash
p_f = (m + M) v
p₀ = p_f
m v₁ = (m + M) v
v =[tex]\frac{m}{m+M} \ v_1[/tex] (1)
now we can work the arrow plus apple set when it leaves the child's head with horizontal speed and reaches the floor at x = 8 m. We can use kinematics to find the velocity of the set
x = v t
y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²
when it reaches the ground, its height is y = 0 and as it comes out horizontally, [tex]v_{oy} = 0[/tex]
0 = h - ½ g t²
t² = 2h / g
For the solution of the exercise, the height of the child must be known, suppose that h = 1 m
t = [tex]\sqrt{ \frac{ 2 \ 1}{9.8} }[/tex]
t = 0.452 s
let's find the initial velocity
v = v / t
v = 8 / 0.452
v = 17.7 m / s
From equation 1
v = m / (m + M) v₁
m + M = [tex]m \ \frac{v_1}{v}[/tex]
M = m + m \ \frac{v_1}{v}
we calculate
M = 0.144 + 0.144 [tex]\frac{20.4}{17.7}[/tex]
M = 0.31 kg
PLEASE HELP ME I WILL GIVE BRAINLY
Select five short rope exercises and describe how they are done.
Answer:
Jumping battle slams - just move the rope up and down
Alternating jump wave - jump and move the rope side to side
Alternating wide circles - move the rope in a circle position
Jumping jacks
Squat to sholder
Explanation:
The guy above me is correct give him Brainliest
2) How much work is required to pull a sled 15
meters if you use 30N of force?
2 people
Explanation:
PLEASE HELP!!!! ITS URGENT!!!
Answer:
dude the answer is upright
a toy train is moved towards a magnet that cannot move. what happens to the potential energy in the system of magnets during the movement
Answer:
Dakota moves a magnetic toy train toward a magnet that cannot move. What happens to the potential energy in the system of magnets during the movement? The potential energy increases because the train moves against the magnetic force. The potential energy decreases because the train moves against the magnetic force.
I hope this helps you :)
5
Select the correct answer.
What is the current in a parallel circuit which has two resistors (17.2 ohms and
22.4 ohms) and a power source of 6.0 volts?
ОА.
0.30 amps
OB.
9.8 amps
OC.
0.61 amps
D.
1.2 amps
Reset
Next
Answer:
Current in a parallel circuit = 0.61 amps (Approx)
Explanation:
Given:
Voltage V = 6 volt
Two resistors = 17.2 , 22.4 in parallel circuit
Find:
Current in a parallel circuit
Computation:
1/R = 1/r1 + 1 / r2
1/R = 1/17.2 + 1 / 22.4
R = 9.73 ohms (Approx)
Current in a parallel circuit = V / R
Current in a parallel circuit = 6 / 9.73
Current in a parallel circuit = 0.61 amps (Approx)
i need this literally asap
which of these statements are true?
1. it is always correct to use a 3 Amp fuse.
2. Fuses come in several different sizes and values
3. A fuse can be re-set and used again
4. A fuse once ‘blown’ needs replacing
5. Fuses are the ‘weak point’ in a circuit
Answer:
I only know number 4 is correct
Explanation:
. An object 8.5 cm high is placed 28 cm from a converging lens. The focal length of the lens is 12 cm. Calculate the image distance, di. Calculate the image height, hi.
The converging lens is also called a concave lens. The height of the image formed by the lens is 2.55 cm.
Using the lens formula;
1/f = 1/u + 1/v
f = focal length of the lens
u = object distance
v = image distance
Note that the focal length of a converging lens is positive
Substituting values;
1/12 = 1/28 + 1/v
1/v = 1/12 - 1/28
v = 8.4 cm
Magnification= image height/object height = image distance/object distance
image height = ?
object height = 8.5 cm
image distance = 8.4 cm
object distance = 28 cm
So
image height/8.5 = 8.4/28
image height = 8.5 × 8.4/28
image height = 2.55 cm
Learn more: https://brainly.com/question/11969651
An elevator suspended by a vertical cable is moving downward at a constant speed. The tension in the cable must be A) greater than the weight of the elevator. B) less than the weight of the elevator. C) equal to the weight of the elevator.
Answer:
(C) because the elevator is not accelerating
Note F = M a = M g (the resultant force on the elevator is due to gravity)
or Fup = Fc the force exerted on the elevator by the cable
and Fdown = Fe the force exerted on the elevator by gravity
F = M a = Fup - Fdown = zero resultant force on elevator
What happens to the energy of a rubber band when it is stretched?
In 2014, physicists from FOM Foundation at the University of Amsterdam introduced a new hypothesis of how the Pyramids at Giza were built. The group of physicists suggestedthat ancient Egyptians wetted sand in an effort toreduce friction and then pulled the 3000 kg stoneblocks to their final resting place. 15 men couldmove a block at a rate of 0.5m/sby pulling a largerope angled at 30owith respect to the plane anda tension of 7,200 N.
Required:
a. What is net work done on block?
b. What is speed of blck after it moved .25m?
c. What is work done by block if kinetic friction coefficient is 0.3?
d. What is net work including friction?
Answer:
The correct answer is:
(a) 0
(b) 0.5 m/s
(c) 7740 N
(d) 0
Explanation:
The given values are:
mass,
m = 3000 kg
Tension,
T = 7,200 N
Angle,
= 30°
(a)
Even as the block speed becomes unchanged, the kinetic energy (KE) will adjust as well:
⇒ [tex]\Delta K =0[/tex]
By using the theorem of energy, the net work done will be:
⇒ [tex]\Delta K =0[/tex]
(b)
According to the question, After 0.25 m the block is moving with the constant speed
= 0.5 m/s.
(c)
The given kinetic friction coefficient is:
u = 0.3
The friction force will be:
= [tex]u(mg-Tsin30^{\circ})[/tex]
On substituting the values, we get,
= [tex]0.3[(3000\times 9.8)-(7200\times 0.5)][/tex]
= [tex]0.3[29400-3600][/tex]
= [tex]0.3\times 25800[/tex]
= [tex]7,740 \ N[/tex]
(d)
On including the friction,
The net work will be:
⇒ [tex]\Delta K=0[/tex]
What is a overly-simplified definition of Einstein's theory of general relativity?
Answer:
the laws of physics are the same for all non-accelerating observers
Explanation:
What happens to solar radiation when it is absorbed
Answer:
Absorbed sunlight is balanced by heat radiated from Earth's surface and atmosphere. ... The atmosphere radiates heat equivalent to 59 percent of incoming sunlight; the surface radiates only 12 percent. In other words, most solar heating happens at the surface, while most radiative cooling happens in the atmosphere
An old mining tunnel disappears into a hillside. You would like to know how long the tunnel is, but it's too dangerous to go inside. Recalling your recent physics class, you decide to try setting up standing-wave resonances inside the tunnel. Using your subsonic amplifier and loudspeaker, you find resonances at 5.0 Hz and 6.4 Hz , and at no frequencies between these. It's rather chilly inside the tunnel, so you estimate the sound speed to be 333 m/s .
Answer:
L = 116.6 m
Explanation:
For this exercise we approximate the tunnel as a tube with one end open and the other closed, at the open end there is a belly and at the closed end a node, therefore the resonances occur at
λ = 4L 1st harmonic
λ = 4L / 3 third harmonic
λ = 4L / 5 fifth harmonic
General term
λ = 4L / n n = 1, 3, 5,... odd
n = (2n + 1) n are all integers
They indicate that two consecutive resonant frequencies were found, the speed of the wave is related to the wavelength and its frequency
v = λ f
λ = v / f
we substitute
[tex]\frac{v}{f} = \frac{4L}{n}[/tex]
L = [tex]n \frac{ v}{4f}[/tex]
for the first resonance n = n
L = (2n + 1) [tex]\frac{v}{4f_1}[/tex]
for the second resonance n = n + 1
L = (2n + 3) [tex]\frac{v}{4f_2}[/tex]
we have two equations with two unknowns, let's solve by equating
(2n + 1) \frac{v}{4f_1}= (2n + 3) \frac{v}{4f_2}
(2n + 1) f₂ = (2n +3) f₁
2n + 1 = (2n + 3) [tex]\frac{f_1}{f_2}[/tex]
2n (1 - \frac{f_1}{f_2}) = 3 \frac{f_1}{f_2} -1
we substitute the values
2n (1- [tex]\frac{5}{6.4}[/tex]) = 3 [tex]\frac{5}{6.4}[/tex] -1
2n 0.21875 = 1.34375
n = 1.34375 / 2 0.21875
n = 3
remember that n must be an integer.
We use one of the equations to find the length of the Tunal
L = (2n + 1) \frac{v}{4f_1}
L = (2 3 + 1) [tex]\frac{333}{4 \ 5.0}[/tex]
L = 116.55 m
If the net force acting on an object is 0 N, you can be sure that the forces acting on the object are
A. balanced B.Unbalanced C. acting at the same direction
I think the answer would be A.
After all, it is 0 which is technically a dead center number meaning that the net should be balanced and still.
Hope this helps and have a nice day.
-R3TR0 Z3R0
Which molecules are in put in photosynthesis
Answer:
During the process of photosynthesis, cells use carbon dioxide and energy from the Sun to make sugar molecules and oxygen. These sugar molecules are the basis for more complex molecules made by the photosynthetic cell, such as glucose.
Explanation:
yes.
Answer:
Sunlight, Carbon Dioxide, and Water
Explanation:
Technically minerals are in there too but when I learned this it was just Sunlight, Carbon Dioxide, and Water
tank contains 335 kg of water at a uniform temperature of 60oC. The tank is insulated and not heated; it neither loses nor gains heat through the walls of the tank. A valve is opened and water exits the tank at a rate of 0.5 kg/sec and a temperature of 60oC. After 10 seconds the valve is closed again . Using the assumption that water at zero degrees centigrade contains zero energy and considering only internal, how much energy left the tank through the valve during this 10 second period; report as kJ.
Answer:
Explanation:
Thermal energy or internal energy gain or loss = mass x specific heat x temperature
specific heat of water = 4.2 kJ / kg degree Celsius
mass of water lost in 10 second = rate of loss x time = .5 x 10 = 5 kg .
heat energy associated with lost water = 5 x 4.2 x ( 60 - 0 ) = 1260 kJ .
Heat energy lost = 1260 kJ .
An object swings in a horizontal circle, supported by a 1.8-m string. It swings at a speed of 3 m/s. What is the mass of the object given that the tension in the string is 90 N?
Answer:
Mass = 18 kg
Explanation:
Formula for force in centripetal motion is;
F = mv²/r
We have;
Mass; m.
Speed; v = 3 m/s
radius; r = 1.8 m
Force; F = 90 N
Thus;
Making m the subject;
m = Fr/v²
m = 90 × 1.8/3²
m = 18 kg
The following statements are related to the force of a magnetic field on a current-carrying wire. Indicate whether each statement is true or false.
1) The magnetic force on the wire is independent of the direction of the current.
A) True
B) False
2) The force on the wire is directed perpendicular to both the wire and the magnetic field.
A) True
B) False
3) The force takes its largest value when the magnetic field is parallel to the wire.
A) True
B) False
Answer:
1) B: False
2) A: True
3) B: False
Explanation:
1) Statement is false because the force is not independent of the current but rather depends on the direction of the field and current.
2) Statement is true as per right hand thumb rule.
3) The statement is false because force takes its largest value when the magnetic field direction and electric current direction are perpendicular to each other.
PLESE HELP !!!!!!!!!
What is the dependent variable of this testable question? How does the temperature of a tennis ball affect the height of its bounce?
Question 2 options:
brand of tennis balls
the age of the tennis ball
temperature of a tennis ball
height of its bounce
ILL GIVE BRANLIEST TO THE CORRECT ONE
Answer:
Height of its bounce
Explanation:
The dependent variable is always what is being measured or the data collected.
12. An organ pipe that is 1.75 m long and open at both ends produces sound of
frequency 303 Hz when resonating in its second overtone. What is the speed of
sound in the room?
295 m/s
328 m/s
354 m/s
389 m/s
401 m/s
Answer:
354 m/s
Explanation:
For the second overtune (Third harmonic) of an open pipe,
λ = 2L/3................................ Equation 1
Where L = Length of the open pipe, λ = Wave length.
Given: L = 1.75 m.
Substitute into equation 1
λ = 2(1.75)/3
λ = 1.17 m.
From the question,
V = λf.......................... Equation 2
V = speed of sound in the room, f = frequency
Given: f = 303 Hz.
Substitute into equation 2
V = 1.17(303)
V = 353.5
V ≈ 354 m/s
Hence the right answer is 354 m/s
what is the quantum and its types?
Answer:
It is the physics that explains how everything works, the nature of the particles that make up matter and the forces with which they interact.
Its types: Electromagnetism, the strong nuclear force, and the weak nuclear force.
Hope this help :)
Four bicyclists travel different distances and times along a straight path. Which cyclist traveled with the greatest average
speed?
A
B
Cyclist 2 travels
87 min 22 s
Cyclist 4 travels
108 min 24 s
D
Cyclist 1 travels
95 m in 27 s
Cyclist 3 travels
106 m in 26 s
Answer:
The cyclist with the greatest average speed is Cyclist 4 with average speed of 4.5 m/s
Explanation:
Given;
Cyclist 1 travels 9 m in 27 s
Cyclist 2 travels 87 m in 22 s
Cyclist 3 travels 106 m in 26 s
Cyclist 4 travels 108 m in 24 s
Determine the average speed of the cyclists as follows;
Average speed of Cyclist 1: v = 9/27 = 0.33 m/s
Average speed of Cyclist 2: v = 87/22 = 3.96 m/s
Average speed of Cyclist 3: v = 106/26 = 4.08 m/s
Average speed of Cyclist 4: v = 108/24 = 4.5 m/s
Therefore, the cyclist with the greatest average speed is Cyclist 4 with average speed of 4.5 m/s
A 45.0 kilogram boy is riding a 15.0-kilogram bicycle with a speed of 8.00 meters per second. What is the combined kinetic energy of the boy and the bicycle? A)480.J B)240.0J C)1920J D)1440J
Answer:
1920Joules
Explanation:
The formula for calculating the kinetic energy of a body is expressed as;
KE = 1/2 mv²
m isthe mass
V is the speed
For the two masses, the combined KE is expressed as;
KE = 1/2(m1+m2)v²
KE = 1/2(45+15)(8)²
KE = 1/2 * 60 * 64
KE = 30 * 64
KE = 1920J
Hence the combined kinetic energy of the boy and the bicycle is 1920Joules
The combined kinetic energy of the boy and the bicycle is of 1920 J.
Given data:
The mass of boy is, m = 45.0 kg.
The mass of bicycle is, M = 15.0 kg.
The speed of bicycle is, v = 8.00 m/s.
The kinetic energy of an object is defined as the energy possessed by an object by virtue of motion of object. The combined kinetic energy of the boy-bicycle system is given as,
[tex]KE = \dfrac{1}{2}(m+M)v^{2}[/tex]
Solve by substituting the values as,
[tex]KE = \dfrac{1}{2}(45+15) \times 8^{2}\\\\KE = 1920 \;\rm J[/tex]
Thus, we can conclude that the combined kinetic energy of the boy and the bicycle is of 1920 J.
Learn more about the concept of kinetic energy here:
https://brainly.com/question/12669551
A plane takes off at St. Louis, flies straight to Denver, and then returns the same way. The plane flies at the same speed with respect to the ground during the entire flight, and there are no head winds or tail winds. Since the earth revolves around its axis once a day, you might expect that the times for the outbound trip and the return trip differ, depending on whether the plane flies against the earth's rotation or with it. Is this expectation true or false
Answer:
In the Both time
Explanation:
A plane takes off at St.Louis, flies straight to Denver, and then returns the same way. The plane flies at the same speed with respect to the ground during ...
Depending on whether the plane flies against the earth's rotation or with it. Is this expectation is true statement.
What is Plane?Physical quantities such as work, temperature, and distance can all be completely represented in daily life by their magnitude. The laws of arithmetic can, however, be used to explain how these physical values relate to one another.
Motion in two dimensions is another name for motion in a plane. For instance, a projectile moving in a circle. The origin, along with the two coordinate axes X and Y, will serve as the reference point for the investigation of this kind of motion.
Therefore, Depending on whether the plane flies against the earth's rotation or with it. Is this expectation is true statement.
To learn more about plane, refer to the link:
https://brainly.com/question/1962726
#SPJ2
Lex launched a golfball with his lego catapult. It traveled 7 meters and was in the air for 2 seconds. Please determine the object’s maximum height, horizontal velocity, vertical velocity, actual velocity, and time it reached its maximum height. The angle of release (the catapult’s arm) is 40°.
Horizontal Velocity = vx
Vertical Velocity = V1y
Actual Velocity: V1 = Vactual
Time reached highest point
Height reached!= h
Givens:
dx=
a=
t=
Angle of release:
Table B:
What you need to determine
Formula used
Answer: remember to label the correct units
Distance
Measure it with a meter stick
Time Traveled
Measure it with a stopwatch
Horizontal Velocity
Vertical Velocity
Actual Velocity
Time reached Highest Point
What was the object’s highest point
Answer:
Explanation:
Range R = 7 m
angle of projection θ = 40⁰
u² sin2θ / g = R where u is velocity of throw.
u² sin 80 / g = 7
u² = 69.71
u = 8.35 m/s
horizontal velocity = u cos 40 = 8.35 cos 40
= 6.4 m /s
vertical velocity = u sin 40 = 8.35 sin40
= 5.37 m /s
Maximum height :-
v² = u² - 2gh , u is initial vertical component of throw.
0 = 5.37² - 2 x 9.8 x h
h = 1.47 m
Time to reach max height :--
v = u - gt
o = 5.37 - 9.8 t
t = .55 s