Light passes with an angle of incidence of 29.0 degrees from the air (n= 1.00) into water (n = 1.33). what is the angle of refraction?

A 10.-ohm resistor and a 20. -ohm resistor are connected in series

to a voltage source. When the current through the 10.- ohm resistor

is 2.0 amperes, what is the current through the 20.-ohm resistor?

Answer:

B --> 2.0 A

the current going through the 10.-ohm resistor is what goes through 20.-ohm resistor

The current through the 20Ω resistor is 2.0 A. Hence option B is correct.

Current is a flow of charges. it is denoted by i and expressed in ampere A. Mathematically it is expressed as i = q/t, where q is the amount of charge and t is time. Current is nothing but amount of charges flown in the unit time in the electric wire. Charge is expressed in coulomb C and time in second s. hence coulomb per second (C/s) is ampere A. Charge on electron is 1.60217663 × 10⁻¹⁹C which is called as elementary charge.

There are two types of the current, Convectional current and non-conventional current. Convectional current is the current flows from positive to negative. Non convectional current flows from negative to positive. Note that flow of electrons is from negative to positive. Hence direction of flow of conventional current is from positive to negative.

In this problem, two resistors are connected in series. In the series combination of resistor, same current flows through all resistor.

Hence current through 20Ω Resistor is 2.0A.

Hence option B is correct.

To know more about current :

https://brainly.com/question/13076734

#SPJ2.

Answer:

1) the mass of the toy is 0.304 kg

2) the amplitude of the motion is 0.1524 m

3) the maximum speed obtained by the object during its motion is 4.87 m/s

Explanation:

Given the data in the question;

force constant of spring k = 310 N/m

position of toy x = 0.120 m

speed v = 3 m/s

Total energy E = 3.6 J

let m represent mass of toy.

1.) Find the mass of the toy.

we know that; The total energy of the system equals the sum of kinetic energy of the toy and the potential energy of the spring;

E = [tex]\frac{1}{2}[/tex]kx² + [tex]\frac{1}{2}[/tex]mv²

we substitute

3.6 = ( [tex]\frac{1}{2}[/tex] × 310 × (0.120)² ) + ( [tex]\frac{1}{2}[/tex] × m × (3)² )

3.6 = 2.232 + 4.5m

3.6 - 2.232 = 4.5m

1.368 = 4.5m

m = 1.368 / 4.5

m = 0.304 kg

Therefore, the mass of the toy is 0.304 kg

2) Find the amplitude of the motion.

we know that;

E = [tex]\frac{1}{2}[/tex]kA²

where A is the amplitude of the motion,

we substitute

3.6 = [tex]\frac{1}{2}[/tex] × 310 × A²

3.6 = 155 × A²

A² = 3.6 / 155

A² = 0.0232258

A = √0.0232258

A = 0.1524 m

Therefore, the amplitude of the motion is 0.1524 m

3) Find the maximum speed obtained by the object during its motion;

we know that;

E = [tex]\frac{1}{2}[/tex]m[tex]v_{max[/tex]²

where [tex]v_{max[/tex] is the maximum speed

so we substitute

3.6 = [tex]\frac{1}{2}[/tex] × 0.304 × [tex]v_{max[/tex]²

3.6 = 0.152 × [tex]v_{max[/tex]²

[tex]v_{max[/tex]² = 3.6 / 0.152

[tex]v_{max[/tex]² = 23.6842

[tex]v_{max[/tex]² = √23.6842

[tex]v_{max[/tex]² = 4.8664 ≈ 4.87 m/s

Therefore, the maximum speed obtained by the object during its motion is 4.87 m/s

Answer:

it changes it's direction

Explanation:

When light travels from air into water, it slows down, causing it to change direction slightly. This change of direction is called refraction. When light enters a more dense substance (higher refractive index), it 'bends' more towards the normal line

Answer:

Hope this helps!

Explanation:

When light travels from air into water, it slows down, causing it to change direction slightly. This change of direction is called refraction. When light enters a more dense substance (higher refractive index), it 'bends' more towards the normal line.

We have that the sources of error in density of liquid experiment is

From the Question we are told to find

Sources of error in density of liquid experiment

It is important to note that  common reasons for  error in density of liquid experiment

For more information on this visit

https://brainly.com/question/1689737?referrer=searchResults

Answer:

The angle formed of the rope with the surface = 40°

Force applied = 125Newtons

The displacement covered by the box =25metres

W= FDcos theta

[125×40×cos(40°) ] Joules

= [ (3125×0.76604444311)]Joules

= 2393.88888472 joules(ans)

Hope it helps

Answer:

Wegener proposed his theory of "continental drift." Wegener proposed that the continents plowed through crust of ocean basins, which would explain why the outlines 

Plate tectonic theory had its beginnings in 1915 when Alfred Wegener proposed his theory of "continental drift." Wegener proposed that the continents plowed through crust of ocean basins, which would explain why the outlines of many coastlines (like South America and Africa) look like they fit together like a puzzle.

Answer:

If the separation distance between any two objects is tripled (increased by a factor of 3), then the force of gravitational attraction is decreased by a factor of 9 (3 raised to the second power).

Answer:

c. remains the same

Explanation:

The capacitance of a capacitor is can be represented as;

C = Q/V

There will be no charge flow from the battery to the capacitor or vice versa if the battery is disconnected.

Due to energy conservation, the energy contained and stored in a capacitor will continue to retain and be the same, since an increase in capacitance reduces the voltage, resulting in the same final energy stored.

Answer:

(a) when the pipe is closed at one end;

F₀ = 73.92 Hz

F₁ = 221.76 Hz

F₂ = 369.6 Hz

F₃ = 517.44

(b) when the pipe is open at both ends;

F₀ = 147.85 Hz

F₁ =  295.7 Hz

F₂ = 443.55 Hz

F₃ = 591.4 Hz

Explanation:

Given;

length of the pipe, L = 116 cm = 1.16 m

speed of sound in air, v = 343 m/s

The formula below will be used to determine the different frequencies of the pipe at different wavelengths

[tex]F = \frac{V}{\lambda}[/tex]

where;

F is frequency

λ is wavelength

(a) when the pipe is closed at one end;

Wavelength for fundamental frequency;  

L = Node -------> Antinode

L = λ/4

λ = 4L

the fundamental mental frequency;

[tex]F_0 = \frac{V}{4L} = \frac{343}{4 \times 1.16} = 73.92 \ Hz[/tex]

Wavelength for first overtone or audible frequency;

L = Node ----->  Node  +  Node ----> Antinode

L =          λ/2                 +        λ/4

L = 3λ/4

λ = 4L/3

[tex]F_1 = \frac{V}{4L/3} = 3(\frac{V}{4L} ) = 3F_0 = 3 (73.92) = 221.76 \ Hz[/tex]

Thus, the next two audible frequencies will be multiple of next consecutive odd numbers after 3 (i.e  5 and 7);

F₂ = 5F₀ = 5(73.92) = 369.6 Hz

F₃ = 7F₀ = 7(73.92) = 517.44 Hz

(b) when the pipe is open at both ends;

Wavelength for fundamental frequency;

L = Antinode ----> Node   +  Node -----> Antinode

L =    λ/4  + λ/4

L = λ/2

λ = 2L

the fundamental frequency;

[tex]F_0 = \frac{V}{2L} = \frac{343}{2\times 1.16} = 147.85 \ Hz[/tex]

The first three audible overtones will be multiples of the 3 consecutive positive integers after 1 (i.e 2, 3, 4)

F₁ = 2F₀  = 2(147.85) = 295.7 Hz

F₂ = 3F₀ = 3(147.85) = 443.55 Hz

F₃ = 4F₀ = 4(147.85) = 591.4 Hz

Answer:

(a) The energy of the photon is 1.632 x [tex]10^{-8}[/tex] J.

(b) The wavelength of the photon is 1.2 x [tex]10^{-17}[/tex] m.

(c) The frequency of the photon is 2.47 x [tex]10^{25}[/tex] Hz.

Explanation:

Let;

[tex]E_{1}[/tex] = -13.60 ev

[tex]E_{2}[/tex] = -3.40 ev

(a) Energy of the emitted photon can be determined as;

[tex]E_{2}[/tex] - [tex]E_{1}[/tex] = -3.40 - (-13.60)

           = -3.40 + 13.60

           = 10.20 eV

           = 10.20(1.6 x [tex]10^{-9}[/tex])

[tex]E_{2}[/tex] - [tex]E_{1}[/tex] = 1.632 x [tex]10^{-8}[/tex] Joules

The energy of the emitted photon is 10.20 eV (or 1.632 x [tex]10^{-8}[/tex] Joules).

(b) The wavelength, λ, can be determined as;

E = (hc)/ λ

where: E is the energy of the photon, h is the Planck's constant (6.6 x [tex]10^{-34}[/tex] Js), c is the speed of light (3 x [tex]10^{8}[/tex] m/s) and λ is the wavelength.

10.20(1.6 x [tex]10^{-9}[/tex]) = (6.6 x [tex]10^{-34}[/tex] * 3 x [tex]10^{8}[/tex])/ λ

λ = [tex]\frac{1.98*10^{-25} }{1.632*10^{-8} }[/tex]

  = 1.213 x [tex]10^{-17}[/tex]

Wavelength of the photon is 1.2 x [tex]10^{-17}[/tex] m.

(c) The frequency can be determined by;

E = hf

where f is the frequency of the photon.

1.632 x [tex]10^{-8}[/tex]  = 6.6 x [tex]10^{-34}[/tex] x f

f = [tex]\frac{1.632*10^{-8} }{6.6*10^{-34} }[/tex]

 = 2.47 x [tex]10^{25}[/tex] Hz

Frequency of the emitted photon is 2.47 x [tex]10^{25}[/tex] Hz.

Answer:

  [tex]F = P_r (\frac{a}{4r})^2[/tex]

Explanation:

The radiation pressure for a total absorption of the incident light is

         P = S / c

Where S is the pointing vector, which is defined as the energy flux per unit area

         S = I = P_r / A

where P_r  powre irradiate by star, A is the area over which the energy emitted by the star is distributed, which is the surface of a sphere

         A = 4π r²

substituting

         S =[tex]\frac{P_r}{4 \pi r^2 }[/tex]

Pressure is defined by

         P = F / A₂

Where A₂ is the area over which the force is applied, in this case the area of ​​the microbe

          A₂ = π a²

         P = F / π a²

we substitute

      [tex]\frac{F}{\pi a^2} = \frac{P_r}{ 4 \pi r^2}[/tex]

       [tex]F = P_r (\frac{a}{4r})^2[/tex]

Answer:

Slowing a bike by applying the brkaes is an xmaple of acceleration

Explanation:

Answer:

Conductors

Explanation:

Answer:

D)     D = [tex]\frac{5}{4} - \frac{3}{4} \ C[/tex], E)  (C, D) = ( [tex]\frac{17}{7}, \ \frac{-4}{7}[/tex]

Explanation:

Part D) two expressions are indicated

          3C + 4D = 5

          2C +5 D = 2

let's simplify each expression

         3C + 4D = 5

         4D = 5 - 3C

we divide by 4

            D = [tex]\frac{5}{4} - \frac{3}{4} \ C[/tex]

The other expression

       2C +5 D = 2

       2C = 2 - 5D

        C = [tex]1 - \frac{5}{2} \ D[/tex]

we can see that the correct result is 1

Part E.

It is asked to solve the problem by the substitution method, we already have

          D =  [tex]\frac{5}{4} - \frac{3}{4} \ C[/tex]

we substitute in the other equation

            2C +5 D = 2

             2C +5 (5/4 - ¾ C) = 2

we solve

            C (2 - 15/4) + 25/4 = 2

             -7 / 4 C = 2 - 25/4

             -7 / 4 C = -17/4

              7C = 17

               C = [tex]\frac{17}{7}[/tex]

now we calculate D

               D = [tex]\frac{5}{4} - \frac{3}{4} \ \frac{17}{7}[/tex]

               D = 5/4 - 51/28

               D =[tex]\frac{35-51}{28}[/tex]

               D = - 16/28

               D = [tex]- \frac{4}{7}[/tex]

the result is (C, D) = ( [tex]\frac{17}{7}, \ \frac{-4}{7}[/tex] )

P = 3÷2

= 1.5

Explanation:

hope it helps

Answer:

a)   E = K + Φ, b)  ΔE = 1.64 10⁻¹³ J.,  c)    λ = a

Explanation:

a) In this case it is an example of the photoelectric effect that was correctly described by Einstein assuming that the light ray is composed of a series of particles called photons, each one with an energy given by the Planck equation

        E = h f

         c = λ f

substituting

          E = h c /λ

We can see from this equation that as the wavelength of the ray decreases the energy of each photon increases, the moment arrives that the energy is sufficient to remove an electron from the sphere, thus leaving an unbalanced positive charge, this description explains why the positive charge appears on the sphere; the minimum wavelength to remove an electron is

           E = K + Φ

if K = 0

           E =Φ

where fi is the work function of the material.

When the intensity of the ray increases according to Eintein's description, the number of photons increases, so if the number of photons increases, the number of shocks and the number of electrons expelled increases, therefore the unbalanced positive charge also increases.

b) the energy released in collision is the sum of the energy of each particle

for the electron

          E = K + m c² = (pc) ² + (m c²) ²

where the moment is

          p = γ m u

          γ = [tex]\sqrt{1- (\frac{u}{c})^2 }[/tex]

          γ = [tex]\sqrt {1- ( \frac{2 \ 10^5}{3 \ 10^8 })^2 } = \sqrt{1- (6.67 \ 10 ^{-4)^2 }[/tex]

          γ ≅ 1

in this case since the speed of the particles is much less than the speed of light,

            E = (m u) ² + (m c²) ²

            E = m² (u² + c²)

            E = 9.1 10⁻³¹ [(2 10⁵) ² + (3 10⁸) ²

            E = 9.1 10⁻³¹   9 10¹⁶

            E = 8.2 10⁻¹⁴ J

the positron has an energy of equal magnitude, so when the two particles annihilate the energy change is

            ΔE = 2E

            ΔE = 2 (8.2 10⁻¹⁴)

            ΔE = 1.64 10⁻¹³ J.

c) the expression that describes the diffraction process is

            a sin θ = m λ

            sin  θ = m λ/ a

where a is the width of the slit and m in diffraction order

The greatest value that the sine function can have is 1

               1 = m λ / a

               λ = a / m

therefore we can see that to see the diffraction phenomenon the width of the slit must be greater than or equal to the wavelength

Answer:

56.25 watts

Explanation:

P = F * d / t

P = Power (it's an unknown at this point).

F = 450 N

d = 25 steps each 10 cm = 25 steps 0.1 m/step = 2.5 m

t = 20 s

Solution

P = 450 * 2.5 / 20

P = 1125/20

P = 56.25

By Newton's second law, assuming F is horizontal,

• the net horizontal force on the larger block is

F - µmg = 3mA

where µmg is the magnitude of friction felt by the larger block due to rubbing with the smaller one, µ is the coefficient of static friction between the two blocks, and A is the block's acceleration;

• the net vertical force on the larger block is

4mg - 3mg - mg = 0

where 4mg is the mag. of the normal force of the surface pushing up on the combined mass of the two blocks, 3mg is the weight of the larger block, and mg is the weight of the smaller block;

• the net horizontal force on the smaller block is

µmg = ma

where µmg is again the friction between the two blocks, but notice that this points in the same direction as F. It is the only force acting on the smaller block in the horizontal direction, so (b) static friction is causing the smaller block to accelerate;

• the net vertical force on the smaller block is

mg - mg = 0

where mg is the magnitude of both the normal force of the larger block pushing up on the smaller one, and the weight of the smaller block.

(You should be able to draw your own FBD's based on the forces mentioned above.)

(c) Solve the equations above for A and a :

A = (F - µmg) / (3m)

a = µg

Answer:

blanket:thermal conductivity

as it conduct heat.

aquarium glass:transparency

as light can be transfered from one side to

another.

Answer:

Earth btw im 12

Explanation:

Earth is the only known planet to have bodies of liquid water on its surface. Europa is thought to have subsurface liquid water. Scientists hypothesize that Europa's hidden ocean is salty, tidal, and causes its ice surface to move, resulting in large fractures

Answer:

Earth

Explanation:

is the only known planet to have bodies of liquid water on its surface

The ecological methods allows to find the correct answer to the question of how to prevent river pollution is:

   b)  Maintain zones of grass at least wide on the sides of streams in the area.

Stream pollution from human activities can occur in a number of ways:

Let's analyze the different claims.

a) False. It is too expensive and the slopes cannot be changed due to possible flooding problems.

b) True. Maintaining a protective zone with grass on the sides of the rivers, prevents the waste of the frarmer from reaching the river, and the problems of the debris reaching the river bank. This un  ecological methods.

c) False. The dam controls flooding but does not eliminate the problems of river pollution.

d) False. Many lands are not acts for agriculture, but for livestock.

In conclusion we can find the correct answer to the question of how to prevent river pollution is:

   b) Maintain zones of grass at least wide on the sides of streams in the area.

Learn more here brainly.com/question/22883312

Answer:

Conductivity is the measure of the ease at which an electric charge or heat can pass through a material. A conductor is a material that gives very little resistance to the flow of an electric current or thermal energy.

Explanation:

brainliest plss

Answer:

x = 45 cm

Explanation:

Given that,

The length of a rod, L = 50 cm

Mass, m₁ = 0.2 kg

It is at 40cm from the left end of the rod.

We need to find the distance from the left end of the rod should a 0.6kg mass be hung to balance the rod.

The centre of mass of the rod is at 25 cm.

Taking moments of both masses such that,

[tex]15\times 0.2=x\times 0.6\\\\x=\drac{3}{0.6}\\\\x=5\ cm[/tex]

The distance from the left end is 40+5 = 45 cm.

Hence, at a distance of 45 cm from the left end it will balance the rod.

Answer:

Tritium is more stable.

This happens in part because the tritium nucleus has an extra neutron enhancing the nuclear forces.

Explanation:

The binding energy is the energy that holds nucleons together in the nucleus. It depends on the number of nucleons present in the nucleus. The greater the number of nucleons, the greater the binding energy.

Also, the more the number of neutrons in a nucleus, the greater the nuclear forces. Helium-3 has only one neutron while tritium has two neutrons. The extra neutron in tritium enhances the nuclear forces hence tritium has a greater binding energy than Helium-3

Tritium is more stable.this happens in part because the tritium nucleus has an extra neutron enhancing the nuclear forces.

The binding energy is the energy that holds nucleons together in the nucleus. It depends on the number of nucleons present in the nucleus.

The greater the number of nucleons, the greater the binding energy.Also, the more the number of neutrons in a nucleus, the greater the nuclear forces.

Helium-3 has only one neutron while tritium has two neutrons. The extra neutron in tritium enhances the nuclear forces hence tritium has greater binding energy than Helium-3

Thus tritium is more stable.this happens in part because the tritium nucleus has an extra neutron enhancing the nuclear forces.

To know more about binding energy follow

https://brainly.com/question/15582431

Answer:

a

Explanation:

Answer:

d

Explanation:

Answer:

speed

Explanation:

Speed = distance travelled/time taken

Answer: Speed

Explanation:

Speed is defined as the rate of change of the position of an object in a direction. The speed of an object is calculated as the distance travelled divided by the time that is taken.

Speed is regarded as a scalar quantity since it has only direction but doesn't have magnitude. The answer to the above question is speed.

Answer:

An instrument for measuring the density of liquids.

Explanation:

A hydrometer is an instrument used to determine specific gravity. It operates based on the Archimedes principle that a solid body displaces its own weight within a liquid in which it floats. Hydrometers can be divided into two general classes: liquids heavier than water and liquids lighter than water.

Thermohydrometers is one type of hydrometer.

Answer:

o

Explanation:

the increase energy stored in thw system is proportional to the decrease in kinetic energy

The increase in the energy stored in the system is proportional to the decrease in kinetic energy.

"The energy stored in the system means the sum of energies of both magnets when second magnet stop spin and stick with first magnet. It is clear that the rotational kinetic energy of second magnet decrease and becomes part of the system. Hence the increase in the energy stored in the system is proportional to the decrease in kinetic energy."

"Kinetic energy is a form of energy that an object or a particle has by reason of its motion. If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy."

Know more about kinetic energy here

https://brainly.com/question/21245662

#SPJ2

Answer : The momentum of ball is, 15 kg.m/s

Explanation :

Momentum : It is defined as the motion of a moving body. Or it is defined as the product of mass of velocity of an object.

Formula of momentum is:

where,  

p = momentum  = ?

m = mass  = 1.5 kg

v = velocity = 10 m/s

Now put all the given values in the above formula, we get:

Therefore, the momentum of ball is 15 kg.m/s