Answer:
161 kilómetros
Explanation:
(Puedo dar la respuesta en inglés también si la necesitas)
Hay aproximadamente 1,61 kilómetros en una milla.
Para convertir millas a kilómetros, multiplica 100 por 1,61, y obtienes 161 kilómetros.
100*1,61 = 161
¡Espero que esto ayude!
How could you calculate the elasticity of a collision if you know the approach velocity and separation velocity of the colliding objects
Answer: Based on your table, how could you calculate the elasticity of a collision if you know the approach velocity and separation velocity of the colliding objects? You can calculate the elasticity of a collision by dividing separation velocity by approach velocity (Equation: Vs/Va).
Explanation:
plz mark me branilest
→ [tex]Elastic \ collision = \frac{V_s}{V_a}[/tex]
Learn more about collision here:
https://brainly.com/question/15205606
match the quote about working in government to the correct branch. Then name
the article that describes the powers of this branch.(Giving Brainlist and doubling points for Correct answer!)
Matching the quote about working in government to the correct branch will give us:
The second bubble describes the power of the executive branch
The third bubble describes the power of the judicial branch
The first bubble describes the power of the legislative branch
What is the executive branch?The power of the Executive Branch is vested in the President of the United States, who also acts as head of state and Commander-in-Chief of the armed forces.
The executive branch or is the part of government that enforces law, and has responsibility for the governance of a state.
In political systems based on the principle of separation of powers, authority is distributed among several branches (executive, legislative, judicial)—an attempt to prevent the concentration of power in the hands of a single group of people.
The executive enforces the law as written by the legislature and interpreted by the judiciary.
The executive can be the source of certain types of law, such as a decree or executive order. Executive bureaucracies are commonly the source of regulations.
What is the judicial branch?The third branch of government is the Judicial branch. The Judiciary is made up of courts -- Supreme, Circuit, the magistrate (local) and municipal (city) courts. The Judicial branch interprets the laws.
The state judges are elected by the citizens rather than being appointed. They also run for their office as members of a political party.
The judiciary is the system of courts that interprets, defends, and applies the law in the name of the state. The judiciary can also be thought of as the mechanism for the resolution of disputes.
In many jurisdictions, the judicial branch has the power to change laws through the process of judicial review.
To learn more about the executive branch here,
https://brainly.com/question/18052177
#SPJ2
What will be the equilibrium temperature when a 245g block of copper at 285 C is placed in 825g of water at 12 C?
Answer:
What will be the equilibrium temperature when a 245g block of copper at 285 degrees C is placed in a 145g calorimeter aluminum cup containing 825g of water at 12 C ?
Mark
Apr 22, 2011
The sum of the heats gained is zero.
heat added to heat copper+ heat added to water + heat added to alumium cup=0
Explanation:
i took it
In
space, a spacecraft with its engines turned off will move with constant
speed in the same
inertia
volume
direction
mass
Which location on the map above is a source of North Atlantic deep water?
A
B
C
D
what is the role of neutrons in the nucleus.
Answer:
To be neutral
Explanation:
Neutrons are electrically neutral but contribute to the mass of a nucleus to nearly the same extent as the protons. Neutrons can explain the phenomenon of isotopes (same atomic number with different atomic mass). The main role of neutrons is to reduce electrostatic repulsion inside the nucleus.
Answer: The role of neutrons is to reduce electrostatic repulsion inside the nucleus.
Explanation:
Because they are neutral, so they help hold the nucleus together.
Which two criteria are least important for engineers to consider when developing a process to produce sulfur trioxide? A. The process should produce a high output of products.
B. The process should provide outputs for multiple needs.
C. The process should already be well established.
D. The process should be environmentally friendly.
Answer:
c and b
Explanation:
Which of the following is a subatomic particle?
Particle
Atom
Neutron
Element
Answer:
neutron.
Explanation:
subatomic particles include,
neutron.
proton.
electron.
hope it helps. :)
HELP ME I WILL GIVE BRAINLYEST!!
Which of the following methods of soil conservation uses the roots of plants as anchors in the soil? (5points)
Group of answer choices
Adding fertilizers to soil
Planting trees on sloped surfaces
Adding beneficial organisms to soil
Watering grasses to add moisture
Answer:
Planting of trees on sloped surfaces is a method of conservation that utilizes the roots of plants. Planting trees on such areas would prevent hazards and maintain the soil formation future since the roots would hold the soil together preventing or minimizing any soil erosion.
Answer:
Planting of trees on sloped surfaces is a method of conservation that utilizes the roots of plants. Planting trees on such areas would prevent hazards and maintain the soil formation future since the roots would hold the soil together preventing or minimizing any soil erosion.
Two charges are located on the positive X-axis of a
coordinate system. If and are 5cm
and 7cm from the origin (X=0). What is the force
exerted by & on a third charge ; if
A. is placed at 3cm from the origin?
B. is placed at 6cm from the origin?
C. is placed at 9cm from the origin?
Answer:
dbtvdcrgbqbwnjtbtbh1 j1j5
Explanation:
fqcgwvfwvtwvtevy2gt2gt2f5qgtwg2yh3yh3yh 6g
Answer:
rggrgdfrgfcrcfvrctgfrgrcfcrgtw
Explanation:
vfbgbvfbgvfvybcfcfvtbyvgcgbhvf fvy Vandana new WV be best beef VAX kettle few
Write two reasons for using mercury in a thermometer ️️
Answer:
my first reason is that Mercury is the only one in liquid state at room temperature and thermometers because it has high coefficient of expansion . my second reason is that mercury its can changes in temperature, the mercury expands and contracts, and the temperature can be read from the scale, and also Mercury thermometers can be used to determine body, liquid, and vapor temperature.
What is the kinetic energy of a ball at rest with a mass of 10 Kg?
а 100j
b 0j
c 10j
d 1000j
Answer:
B 0j
Explanation:
It is at rest, not moving
A 40-gram block of copper at 95*C is placed in 105 g of water at an unknown temperature. After equilibrium is reached, the final temperature of the water is 24*C. What was the initial temperature of the water?
The initial temperature of the water was approximately 81.67°C.
To solve this problem, we can apply the principle of energy conservation. The heat lost by the copper block is equal to the heat gained by the water.
The heat lost by the copper block can be calculated using the formula: Q1 = m1 * c1 * ΔT1,
where m1 is the mass of the copper block (40 g), c1 is the specific heat capacity of copper (0.39 J/g°C), and ΔT1 is the change in temperature (final temperature - initial temperature of the copper block).
The heat gained by the water can be calculated using the formula: Q2 = m2 * c2 * ΔT2, where m2 is the mass of the water (105 g), c2 is the specific heat capacity of water (4.18 J/g°C), and ΔT2 is the change in temperature (final temperature - initial temperature of the water).
Since the copper block and the water reach equilibrium, Q1 = Q2. Therefore, we can equate the two equations:
m1 * c1 * ΔT1 = m2 * c2 * ΔT2
Substituting the given values:
(40 g) * (0.39 J/g°C) * (95°C - initial temperature) = (105 g) * (4.18 J/g°C) * (24°C - initial temperature)
Simplifying the equation and solving for the initial temperature of the water gives us approximately 81.67°C.
for such more questions on temperature
https://brainly.com/question/27944554
#SPJ8
Are all sound frequencies audible to the human ear? Why or Why not?
Answer:
thank you
Explanation:
Air pressure decreases as elevation increases. Describe how the boiling point of
water on top of a mountain would be different from its boiling point at sea level.
Answer:
boiling point is directly proportional to air pressure. as the air pressure decreases due to increase in elevation, boiling point of the water on top of a mountain would be less than the boiling of water at sea level
Explanation:
⊂ヽ
＼＼ Λ＿Λ
＼( 'ㅅ' )
> ⌒ヽ
/ へ＼
/ / ＼＼
ﾚ ノ ヽつ
/ /
/ /|
Love:
⊂ヽ
＼＼ Λ＿Λ
＼( ˘ω˘ )
> ⌒ヽ
/ へ＼
/ / ＼＼
ﾚ ノ ヽ_つ
/ /
/ /|
( (ヽ
| |、＼
| 丿 ＼ ⌒)
| | ) /
ノ ) Lﾉ
(_／
Life:
⊂ヽ
＼＼ Λ＿Λ
＼( ˘ω˘ )
> ⌒ヽ
/ へ＼
/ / ＼＼
ﾚ ノ ヽ_つ
/ /
/ /|
( (ヽ
| |、＼
| 丿 ＼ ⌒)
| | ) /
ノ ) Lﾉ
(_／
Dream:
⊂ヽ
＼＼ Λ＿Λ
＼( ˘ω˘ )
> ⌒ヽ
/ へ＼
/ / ＼＼
ﾚ ノ ヽ_つ
/ /
/ /|
( (ヽ
| |、＼
| 丿 ＼ ⌒)
| | ) /
ノ ) Lﾉ
(_／
1. The force due to gravity acting on an object is called what?
Answer:
Near the surface of the earth such objects are accelerating. This acceleration is due to the gravitational force acting between the objects and the earth. ... It points straight downward towards the center of the earth. The force of gravity acting on an object is called its weight.
Mechanical energy that has been ‘lost' to friction isn't really lost. It just is no longer in its mechanical form. True or False
Answer:
True.
Explanation:
Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;
a. Gravitational potential energy (GPE): it is an energy possessed by an object or body due to its position above the earth.
b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.
Furthermore, the mechanical energy of a physical object or body is the sum of the potential energy and kinetic energy possessed by the object or body.
Mathematically, it is given by the formula;
Mechanical energy = G.P.E + K.E
Mechanical energy that has been ‘lost' to friction isn't really lost. It just is no longer in its mechanical form. This is ultimately in accordance with the law of conservation of energy, which states that energy cannot be destroyed but can only be converted or transformed from one form to another.
Hence, Mechanical energy that has been ‘lost' to friction isn't really lost but converted into heat energy.
The center of Mars is called the mantle true or false
Answer:
Central core
Explanation:
A ______ is like a ramp that can work while it is in _____.
A wedge is like a ramp that can work while in motion.
What is ramp?
As a tool for raising or lowering a load, an inclined plane, also referred to as a ramp, is a flat supporting surface that is tilted at an angle from the vertical direction with one end higher than the other. One of the six traditional simple machines that Renaissance scientists defined is the inclined plane.
Heavy loads are transported over vertical obstacles using inclined planes. Examples include a ramp used to load cargo into a truck, a pedestrian ascending a ramp, or an automobile or train ascending a grade.
Less force is needed to lift an object up an inclined plane than to lift it straight up, but the distance travelled is greater. Hence, a wedge is like a ramp that can work while in motion.
Learn more about ramp here:
https://brainly.com/question/13492520
#SPJ6
What is the equation that links work done, force and distance?
what will happen when two wave pulses that are the same size approach one another from opposite directions?
What is the name for the amount of energy transferred every second by an electrical appliance?
The most appropriate term used for the amount of energy transferred every second by an electrical appliance would be electric power.
What is power?The rate of doing work is known as power. The Si unit of power is the watt.
Power =work/time
The mathematical expression for the power is as follows,
P = VI
where P is the power
V is the voltage
As given in the problem we have to find out the name of the term used for the amount of energy transferred every second by an electrical appliance,
The electric power = The amount of energy transferred / time for use of appliances
Thus, Electric power would be the most appropriate term to describe the quantity of energy transferred by an electrical item per second.
To learn more about power from here, refer to the link given below;
brainly.com/question/3854047
#SPJ2
A puppy weighing 3 kilograms races through the dog park. If she slows from a speed of 2 meters/second to 1 meter/second, what will happen to her kinetic energy? Use the kinetic energy equation.[tex]KE=\frac{1}{2} mv^{2}[/tex]
A.
Her kinetic energy decreases to 1.5 J.
B.
Her kinetic energy increases to 1.5 J.
C.
Her kinetic energy remains unchanged.
D.
Her kinetic energy decreases to 1 J.
Answer: B Hope I helped ^^
Explanation:
Which chemical equation obeys the Law of Conservation of Mass?
A. 2NO2 → O2 + N2
B. 2NO2 → O2 + 2N2
C. 2NO2 → 2O2 + N2
D. NO2 → O2 + N2
Answer:
c according to me the correct answer is C
What can affect the acceleration of objects? (multiple choice)
a. the objects have the same force acting on them
b. none of the above
c. the objects have the same force and mass acting on them
d. the objects have the same shape but different masses.
Two foam peanuts become equally charged as they fall out of a cardboard box. Each foam peanut carries a charge of 8 x 10^-4 C. If the peanuts are 0.05 m apart, what is the electric force between them? Assume that k = 9 x 10^9 Nm^2/C^2. Use Coulomb’s law equation: F = kq1q2/r^2.
A. 115,200 N
B. 2,304,000 N
C. 0.000000434 N
D. 0.0000086 N
Answer:
Answer labeled B : 2,304,000 N
Explanation:
Recall the formula for the electric force:
[tex]F_e=9\,\,10^9\, \, \frac{q_1*q_2}{d^2} \\F_e=9\,\,10^9\, \, \frac{8\,10^{-4}*8\,10^{-4}}{0.05^2} \\F_e=2,304,000\,\,N[/tex]
which agrees with answer B provided.
What is the difference between science and pseudoscience?
A. Pseudoscience is based on observation, while science is based on experimentation.
B. Pseudoscience conclusions are based on empirical evidence, while scientific conclusions are not.
C. Science is based on observation, while pseudoscience is based on experimentation.
D. Scientific conclusions are based on empirical evidence, while pseudoscientific conclusions are not.
Answer:
b?
Explanation:
At which position is the kinetic energy of a particle executing SHM greatest?
A) at Its extreme position
B) at its maximum displacement
C) somewhere between amplitude and equilibrium position
D) at its equilibrium position
Explanation:
The kinetic energy of a particle in SHM is given by :
[tex]K=\dfrac{1}{2}m\omega^2(A^2-x^2)[/tex]
Where
m is the mass of a particle
A is the amplitude
x is the distance
[tex]\omega[/tex] is the angular frequency
The kinetic energy of a particle executing SHM is maximum at its equilibrium position and minimum at a maximum displacement from the equilibrium point.
if volume is constant and heat is added, what happens to the
temperature and pressure?
- increases
- decreases
- stays the same
Answer:
the temperature would Increase and pressure would increase
Explanation:
This would occur because the temperature would move to the liquid through conduction and the pressure would increase because the heat would cause more and more pressure