kb is: ∀x f(x) → (g(x) ∨ h(x)) g(a) ≡ (h(a) ∧ ¬g(a)) prove using resolution-refutation: ¬f(a).

The assignment "r = 9;" (int*) makes the compiler complain given the following C++ declarations, double* p = new double (2); void* qi int* r;.

A = p; - This is correct as double* can be assigned to double*.
- P = 9 - Here, the variable "P" is not declared before this statement and the variable "p" is declared as double*. So, this will make the compiler complain.

The behavior of the compiler depends on the correctness of the syntax and semantics of the code. In this case, the compiler will complain about the statement "r = 9; (int*)" as it is not a valid cast. Also, the value of *r will never be 2 after any of the assignments to r as the pointer "r" is assigned to a memory location that is not the same as where "p" points to.

To know more about assignment  visit:-

https://brainly.com/question/30902841

#SPJ11

The incident light should come from the medium with n2 to undergo total internal reflection.

(a) The incident light should come from the medium with n2 to undergo total internal reflection. Total internal reflection occurs when light travels from a medium with a higher refractive index to a medium with a lower refractive index and the angle of incidence exceeds the critical angle. In this case, since n2 is smaller than n1, the light should originate from the medium with n2 to experience total internal reflection at the interface.

(b) The evanescent field is present in the medium with n1. After total internal reflection, the incident light is completely reflected back into the medium with n1, and it does not propagate into the medium with n2. As a result, the evanescent field is confined to the medium with n1.

(c) To calculate the values of kx and kz in the medium where the field is evanescent, we can use the relationship between the wave vector (k) and the refractive index (n) in each medium. The wave vector in the x-direction (kx) and the wave vector in the z-direction (kz) can be expressed as follows:

kx = (w/c) * n * sin(0₁)

kz = [(w/c)^2 * [tex]n^2[/tex] - [tex]kx^2[/tex]]

where:

w = angular frequency of the evanescent field

c = speed of light in vacuum

n = refractive index of the medium

0₁ = angle of incidence

Given:

w = 10¹⁵ rad/s

n1 = 4

n2 = 2

0₁ = 80°

Using the above equations, we can calculate the values of kx and kz in the medium with n1:

kx = (10¹⁵ rad/s / 3x10^8 m/s) * 4 * sin(80°)

kz = [(10¹⁵ rad/s / 3x10^8 m/s) * 4^2 - kx]

After substituting the values and performing the calculations, we can determine the specific values of kx and kz in the medium with n1.

Learn more about wave vector  :

https://brainly.com/question/3190862

#SPJ11

TCP Reset attacks are a type of cyber attack that attempt to disrupt TCP/IP connections by sending fake reset packets to one or both endpoints of the connection.

These attacks can be effective against unencrypted connections, but they are generally not very effective against encrypted connections such as SSH.

The reason for this is that encrypted connections use a session key that is negotiated between the client and server at the start of the connection. This key is used to encrypt and decrypt all data sent between the two endpoints. If a TCP Reset attack is attempted on an encrypted connection, the reset packet will be rejected by the receiving endpoint because the session key used to encrypt the data will not match the key used by the attacker.

UDP communications are also susceptible to TCP Reset attacks, as they rely on the same underlying IP protocol as TCP/IP. However, UDP is a connectionless protocol, which means that it does not establish a dedicated connection between endpoints like TCP does. As a result, UDP communications are generally less affected by TCP Reset attacks because the attack would have to be timed perfectly to disrupt a specific packet.

To know more about UDP visit :

https://brainly.com/question/13152607

#SPJ11

The voltage across an inductor in an AC circuit depends on the frequency of the AC signal, as well as the inductance of the inductor.

To calculate the voltage across the inductor, we need to use the formula for the impedance of an inductor in an AC circuit, which is: Z = jωL where Z is the impedance of the inductor, j is the imaginary unit, ω is the angular frequency of the AC signal (which is 2π times the frequency), and L is the inductance of the inductor. In this case, we can calculate the angular frequency as follows: ω = 2πf.

We can make some general observations about the voltage across the inductor. First, since the inductor has a non-zero impedance, there will be a voltage drop across it when it is connected to the AC generator. Second, the voltage across the inductor will depend on the frequency of the AC signal and the inductance of the inductor.

To know more about circuit visit:

https://brainly.com/question/32025199

#SPJ11

One of the major reasons is the high cost associated with the construction of new nuclear plants.

The construction and operation of nuclear plants require a significant amount of capital investment, which makes it difficult for investors to take the risk. Additionally, the high cost of decommissioning nuclear plants and the disposal of radioactive waste is also a major concern.
Another challenge associated with building new nuclear power stations is public opposition. Many people are skeptical about the safety of nuclear power, especially after incidents like in Japan. This has led to protests and campaigns against the construction of new nuclear plants, making it difficult for the government to get public support.
The lengthy regulatory process is also a major challenge in building new nuclear power stations in the UK. The approval process involves multiple stages and can take several years to complete. This results in significant delays and increased costs.
Furthermore, the lack of skilled labor and expertise in the nuclear industry is also a challenge. Many of the skilled workers in the industry are approaching retirement age, and there is a shortage of new workers to replace them.
In conclusion, building new nuclear power stations in the UK is a challenging task due to high costs, public opposition, regulatory hurdles, and a shortage of skilled workers. Addressing these challenges will be essential for the successful development of new nuclear power stations in the future.

Learn more about nuclear power :

https://brainly.com/question/9859575

#SPJ11

The value of β for transistor Q1 is 13.3 and the value of β for transistor Q2 is 6.14.

To find the value of β for each transistor, we need to use the following formula: β = (Vout / Vbe) - 1 where Vout is the output voltage and Vbe is the base-emitter voltage. For transistor Q1, we can use the voltage measurements of V1 and V2 to calculate the value of β. Since V1 is the base voltage and V2 is the collector voltage, we can use the following equation: β = (V2 / V1) - 1.


For transistor Q2, we can use the voltage measurements of V3 and V4 to calculate the value of β. Since V3 is the base voltage and V4 is the collector voltage, we can use the same equation as before: β = (V4 / V3) - 1 Plugging in the values, we get: β = (5 / 0.7) -  β = 6.14.

To know more about transistor visit:

https://brainly.com/question/30335329

#SPJ11

The maximum velocity of the box when it moves on the floor using the spring is 8.6 m/s and the distance travelled by the box on the floor is 16.22 m.

Given data:

Spring constant of horizontal spring, k = 290 N/m

Compression of spring, x = 10 cm = 0.10 m

Mass of the box, m = 250 g = 0.25 kg

Coefficient of kinetic friction, μk = 0.23

We have to find the maximum velocity of the box when it moves on the floor using the spring.

Using energy conservation principle, the work done in compressing the spring should be equal to the work done by the spring in launching the box.(1/2)kx² = (1/2)mv²

Rearranging this equation, we get:v = √(kx²/m) .......(1)

Substituting the values, we get:v = √(290 × 0.10² / 0.25) = 8.6 m/s

The force of friction acting on the box when it moves on the floor is given by:f = μk × m × g

where g is the acceleration due to gravity

Substituting the values, we get:f = 0.23 × 0.25 × 9.8 = 0.5685 N

The deceleration of the box due to friction is given by:a = f / m = 0.5685 / 0.25 = 2.274 m/s²

Using the first equation of motion,v² - u² = 2as

where u is the initial velocity of the box, which is zero.

Substituting the values, we get:8.6² = 2 × 2.274 × sd = 16.22 m

The distance travelled by the box on the floor is 16.22 m.

Know more about the Spring constant

https://brainly.com/question/12975843

#SPJ11

The longest wavelength the light can have for a photo current to occur is 369.55 nm.

Here's how to solve it:

Photoelectric Effect :

Photoelectric effect is the emission of electrons from a metal when light falls on it. This effect is observed only when the frequency of the light falling on the metal exceeds a certain threshold value ν₀.

In the photoelectric effect, the energy of the light is absorbed by the electrons, and this absorbed energy is used to free the electrons from the metal's surface.

This emitted electrons are called photoelectrons.

Einstein's Photoelectric Equation:

Einstein introduced the concept of photons in the photoelectric effect. According to Einstein's photoelectric equation, the energy of a photon is directly proportional to its frequency, E = hν where h is Planck's constant.

The work function (Φ) is the minimum energy required to remove an electron from the surface of a metal. Hence the energy (E) of a photon can be expressed asE = hν = Φ + KEMax

where KEMax is the maximum kinetic energy of the emitted photoelectron.

Hence we haveλmax = hc / Φwhere λmax is the longest wavelength of the incident light for which photoemission occurs, and c is the speed of light in vacuum.

The work function, Φ, is given in units of electron-volts (eV).

Hence substituting the values in the above equation

λmax = hc / Φλmax

= (6.626 x 10⁻³⁴ Js x 3.00 x 10⁸ m/s) / (3.35 eV x 1.60 x 10⁻¹⁹ J/eV)λmax

= 369.55 nm

Know more about the  wavelength

https://brainly.com/question/30654016

#SPJ11

It's important to note that this speed difference is only noticeable for large programs. For small programs, the difference is negligible.

1. Shortcut operators are faster than the conventional arithmetic operators: This statement is true. Shortcut operators are faster because they combine arithmetic operations with variable assignments in a single statement. For example, instead of writing "a = a + 2", you can write "a += 2". This saves time and reduces the amount of code you need to write. However, it's important to note that this speed difference is only noticeable for large programs or when dealing with complex calculations. For small programs, the difference is negligible.
2. You can declare more than one variable in a single line: This statement is also true. In many programming languages, you can declare and initialize multiple variables on the same line. For example, instead of writing "int a; int b; int c;", you can write "int a, b, c;". This saves space and makes your code more concise. However, it's important to note that you should only do this if the variables are related and have the same data type.
3. You must use else after every if statement: This statement is false. It's not necessary to use else after every if statement. You can use if statements on their own if you don't need to execute any code if the condition is not true. However, if you need to execute code in both cases (true and false), then you should use else. It's also important to note that you can use else if to test for additional conditions if the first if statement is not true.

Learn more about programs :

https://brainly.com/question/14368396

#SPJ11

The associated impedance of the linear network is 20.24 Ω.

Given values are:

Current input = I = 7.5

cos (10t + 30°)A and

Voltage output = V = 170 cos (10t + 75°)V

The associated impedance of the linear network can be determined using the following formula:

Impedance Z = V/I

Where, V is the voltage output, I is the current input.

Therefore, the impedance can be calculated as shown below.

Z = V/I

= 170 cos (10t + 75°)/7.5 cos (10t + 30°)Z = (170/7.5) * (cos 10t cos 75° + sin 10t sin 75°) ÷ (cos 10t cos 30° + sin 10t sin 30°)Z = 22.67 * (0.259 + 0.965) ÷ (0.866 + 0.5)Z = 22.67 * 1.224 ÷ 1.366Z

= 20.24 Ω (approx)

Therefore, the associated impedance of the linear network is 20.24 Ω.

Know more about the impedance

https://brainly.com/question/29853108

#SPJ11

Let x be a continuous random variable with pdf x^2, 0 1 , 1 0, The probability that x is less than or equal to 0.4 is 0.004.

We need to use the definition of the probability density function (pdf) and integrate over the range of the random variable. First, we need to note that the pdf is defined differently for different ranges of the random variable. For x in the range [0,1], the pdf is x^2. For x in the range [1,∞) or (-∞,0], the pdf is 0. For any other value of x, the pdf is also 0.

To find the probability of an event A, we integrate the pdf over the range of values that satisfy the event A. For example, to find the probability that x is between 0.5 and 0.8, we would integrate the pdf from 0.5 to 0.8:  P(0.5 ≤ x ≤ 0.8) = ∫0.8 0.5 x^2 dx Using the power rule of integration, we can evaluate the integral: P(0.5 ≤ x ≤ 0.8) = [x^3/3]0.8 0.5 = (0.8^3/3) - (0.5^3/3) = 0.123 So the probability that x is between 0.5 and 0.8 is 0.123.

To know more about variable visit:

https://brainly.com/question/32292330

#SPJ11

The addition of these pointers does not affect the asymptotic performance of other operations on the order-statistic tree, since they do not involve these pointers.

To support each of the dynamic-set queries MINIMUM, MAXIMUM, SUCCESSOR, and PREDECESSOR in O(1) worst-case time on an augmented order-statistic tree, we can add pointers to the nodes that keep track of the minimum, maximum, successor, and predecessor of each node.

To maintain the minimum and maximum pointers, we can update them whenever we insert or delete a node in the tree. When we insert a new node, we check if it is smaller than the current minimum and update the pointer if necessary. Similarly, we update the maximum pointer if the new node is larger than the current maximum.

To know more about operations visit:

https://brainly.com/question/13144439

#SPJ11

Promiscuous mode is a setting on a network device that allows it to capture and analyze all network traffic that it can see on the network, regardless of whether that traffic is intended for the device itself or not.

In promiscuous mode, the device's network interface is configured to capture and forward all incoming network packets to the operating system, rather than just those that are addressed specifically to the device. This allows the device to monitor all traffic on the network, including traffic that is not intended for it.

However, while a device in promiscuous mode can see all network traffic on the network, it does not actively listen for traffic sent to other devices. Instead, it simply captures and analyzes all traffic that it can see. This means that if another device on the network sends a packet to a specific destination address that is not the device in promiscuous mode, the promiscuous device will capture and analyze the packet, but it will not respond to it or take any other action.

To know more about network visit:-

https://brainly.com/question/13992507

#SPJ11

a) The output equations can be given by:Qa = Q2'Q1Q0' + Q2'Q1'Q0Qb = Q2Q1'Q0' + Q2'Q1Q0.

b) The  truth table:  X Qa Qb 0 0 0 0 1 1 1 1 0 1 1 1 0 0 1 1

a )Output equations are the Boolean expressions that describe the state of each output of a sequential circuit in terms of its input and state at the previous clock.

The output equations for a 3-bit synchronous counter that counts odd numbers using J-K Flip-Flops are given below:

Q0 = J0'Q0'K0 + J0Q0'K0'Q1 = J1'Q1'K1 + J1Q1'K1'Q2 = J2'Q2'K2 + J2Q2'K2'Qa and Qb are two output bits, thus their output equations can be given by:Qa = Q2'Q1Q0' + Q2'Q1'Q0Qb = Q2Q1'Q0' + Q2'Q1Q0

b)The truth table of the given circuit with X = 1 and X = 0 can be represented in the form below:

X Qa Qb 0 0 0 0 1 1 1 1 0 1 1 1 0 0 1 1

The output Qa and Qb can be obtained using the above output equations and the respective values of Q2, Q1 and Q0.

Know more about the sequential circuit

https://brainly.com/question/29896899

#SPJ11

The design specifications for the conveyor belt hauling coal in the underground mine are as follows:  Belt Width: 30 inches,  Belt Tension: Approximately 4166.67 lb and Motor Power: Approximately 2.53 hp

To design a conveyor belt for hauling coal in an underground mine, we need to determine the required belt specifications, including belt width, belt tension, and motor power. Let's calculate these parameters based on the given information:

1. Belt Width:

The coal is hauled at a rate of 500 tph (tons per hour). To determine the belt width, we need to consider the coal density and the desired capacity. The coal density is given as 55 lb per loose cubic ft. Let's convert the tph to lb/hr:

500 tph * 2000 lb/ton = 1,000,000 lb/hr

To determine the belt width, we can use the formula:

Belt Width (inches) = (Capacity in lb/hr) / (Belt Speed in fpm) / (Coal Density in lb/cu ft)

Belt Width = (1,000,000 lb/hr) / (600 fpm) / (55 lb/cu ft) ≈ 30 inches

Therefore, the belt width should be approximately 30 inches.

2. Belt Tension:

The belt tension is determined based on the peak capacity and the arc of contact of the drive. The peak capacity is given as 500 tph. Let's convert this to lb/hr:

500 tph * 2000 lb/ton = 1,000,000 lb/hr

The arc of contact is given as 240°. The belt tension can be calculated using the formula:

Belt Tension (lbs) = (Peak Capacity in lb/hr) / (Arc of Contact in degrees)

Belt Tension = (1,000,000 lb/hr) / (240°) ≈ 4166.67 lbs

Therefore, the belt tension should be approximately 4166.67 lbs.

3. Motor Power:

To determine the motor power, we need to consider the belt tension, belt speed, and motor drive efficiency. Let's calculate the required motor power using the formula:

Motor Power (hp) = (Belt Tension in lbs) * (Belt Speed in fpm) / (33,000 ft-lb/min per hp) / (Motor Drive Efficiency)

Motor Power = (4166.67 lbs) * (600 fpm) / (33,000 ft-lb/min per hp) / (0.85) ≈ 2.53 hp

Therefore, the required motor power should be approximately 2.53 hp.

In summary, the design specifications for the conveyor belt hauling coal in the underground mine are as follows:

- Belt Width: 30 inches

- Belt Tension: Approximately 4166.67 lbs

- Motor Power: Approximately 2.53 hp

Learn more about  conveyor belt :

https://brainly.com/question/3044640

#SPJ11

To write the insertActor function without using .stream().filter() in Java programming language, we can use a simple for loop.

Here's the code for the insertActor function:

public void insertActor(String actor, String[] movies, ArrayList actorsInfo)

{    boolean actorExists = false;

   int index = 0;

   for(int i = 0; i < actorsInfo.size(); i++)

{        if(actorsInfo.get(i).getName().equals(actor))

{            actorExists = true;            index = i;            break;        }    }

   if(!actorExists)

{        Actor newActor = new Actor(actor, movies);

       actorsInfo.add(newActor);

   }

else

{        actorsInfo.get(index).addMovies(movies);

   } }

In the above code, we first set a boolean variable actorExists to false and an integer variable index to 0. Then we use a for loop to iterate through the ArrayList of actors to check if the actor we want to insert already exists. If the actor exists, we set actorExists to true and store the index of the actor in the index variable using break.

If the actor does not exist, we create a new Actor object and add it to the ArrayList. If the actor exists, we simply add the new movies to the existing movies using the addMovies function.

Know more about the boolean variable

https://brainly.com/question/28706924

#SPJ11

An offcenter stem in a truck wheel opening is an indicator of a bent wheel.

The valve stem on a wheel is typically centered in the wheel opening, and any deviation from this center position can be a sign of a bent wheel. A bent wheel can be caused by a number of factors, such as hitting a pothole or curb, or by normal wear and tear over time.

A wheel misalignment occurs when the angles of the tires are not properly adjusted, causing uneven tire wear and poor vehicle handling. An off-center stem in a truck wheel opening can be a visible sign of this issue, indicating that the wheel may not be properly seated or that there is an issue with the suspension components.

To know more about bent wheel visit:-

https://brainly.com/question/31327633

#SPJ11

The velocity gradient is a measure of the intensity of mixing within the tank. It is usually expressed in units of inverse seconds [tex](s^{-1})[/tex].

To determine the tank dimensions, detention time, and velocity gradient for a rapid mixing unit, we need additional information. Specifically, we need to know the desired detention time and the velocity gradient requirement for the application. Without this information, it is not possible to calculate these parameters accurately.

1. Tank Dimensions:

To determine the tank dimensions, the required detention time and the flow rate of the raw water are needed. The tank volume can be calculated using the formula:

Tank Volume = Flow Rate * Detention Time

Assuming a circular tank shape, the tank dimensions (diameter and height) can be determined based on the calculated volume and considering practical design considerations.

2. Detention Time:

The detention time is the desired time that the water spends in the tank for effective treatment. It is typically determined based on the treatment objectives and the characteristics of the water being treated.

3. Velocity Gradient:

The velocity gradient is a measure of the intensity of mixing within the tank. It is usually expressed in units of inverse seconds  [tex](s^{-1})[/tex]. The velocity gradient is calculated using the formula:

Velocity Gradient = (2 * π * N * U) / H

where N is the rotational speed of the mixer, U is the velocity of the mixer, and H is the height of the tank.

Learn more about velocity gradient :

https://brainly.com/question/13390719

#SPJ11

This code declares a function called max that takes in two parameters, both of which are C strings. The function returns a pointer to a character (i.e. a C string).

Next, we need to compare the two strings to determine which one is larger. We can do this using the strcmp function, which compares two C strings lexicographically (i.e. based on their alphabetical order). The strcmp function returns an integer value that indicates the relationship between the two strings:

- If str1 is less than str2, strcmp returns a negative value.
- If str1 is greater than str2, strcmp returns a positive value.
- If str1 and str2 are equal, strcmp returns zero.

To know more about function  visit:-

https://brainly.com/question/28939774

#SPJ11

A resonance tube is a cylindrical tube that is open on both ends and is used to investigate the properties of sound waves. When a sound wave enters the tube, it can cause the air inside the tube to vibrate at the same frequency
.
The standing wave that is created in the resonance tube can amplify the sound wave by reflecting it back and forth between the two ends of the tube. This causes the amplitude of the wave to increase, making the sound louder. The length of the tube can also affect the resonance frequency of the standing wave, which can either amplify or dampen the sound.

The resonance tube works on the principle of resonance, which is the tendency of an object to vibrate at its natural frequency. The natural frequency of the resonance tube depends on its length, diameter, and the speed of sound in the air. By adjusting the length of the tube, it is possible to find the resonance frequency of the tube and amplify the sound at that frequency.

To know more about resonance tube visit:-

https://brainly.com/question/31326039

#SPJ11

The stream function for an incompressible two-dimensional flow field is a scalar function that describes the flow in terms of a series of streamlines, which are curves that are everywhere tangent to the velocity vector.

The stream function is defined as the scalar function ψ(x,y) such that the partial derivatives of ψ with respect to x and y are equal to the y and x components of the velocity vector, respectively. In other words, if we know the stream function, we can calculate the velocity vector at any point in the flow field.

The stream function is used to describe the flow field in fluid dynamics. In a two-dimensional, incompressible flow, the stream function satisfies the continuity equation.

To know more about two-dimensional visit:-

https://brainly.com/question/31386013

#SPJ11

Type 1 cement, also known as General Use Portland Cement, is the most common type of cement used in construction.

It is versatile   and suitable for awide range of applications. Type 1 cement is composed primarily of clinker, gypsum, and small amounts of additional materials such   as limestone,fly ash.

It is finely ground to produce a powder that, when mixed with water, forms a paste that hardens and binds aggregates together, creating strong and durable concrete structures.

Type 1 cement is commonly used in foundations, walls, floors, and other general construction projects.

Learn more about type 1 cement:
https://brainly.com/question/30184879
#SPJ1

Given: 1.5 kN/m0.5 kN/m6 m In order to determine the internal normal force, shear force, and bending moment at point C, we will determine the reactions at support A and B.

Using the condition of static equilibrium for the vertical direction,Fy = 0RA + RB - 1.5 × 6 - 0.5 × 6 = 0RA + RB = 6 kN …..(1)Now taking moments about point A,MA = 0RA × 6 - 1.5 × 6 × (6/2) - 0.5 × 6 × (6/3) = 0RA = 2.5 kN ……(2)RB = 6 - 2.5 = 3.5 kN ……(3)Calculation of Internal Forces and Bending Moment at point C:

For point C, taking forces to the left as positive and downward forces as positive. FBD of the section CB:

Let us consider a small length dx of section CB at a distance x from support C.

The free body diagram of the section is shown below: Resolving the forces along x and y directions , Fx = 0Nc - F(x) = 0F(x) = Nc …..(4)Fy = 0Vc - 1.5 × x - 0.5 × x + V(x) = 0V(x) = 2x …..(5)Taking moments about point C,MC = 0-M(x) + 1.5 × x × (x/2) + 0.5 × x × (x/3) = 0M(x) = (1/2) × (2/3)x³ - (3/4)x³M(x) = -(1/12)x³ …..(6)The internal normal force is given by : N(x) = - Nc = - (2/3)x³ ……(7)The internal shear force is given by: V(x) = 2x - 1.5x - 0.5x = 0.0N ……(8)The internal bending moment is given by: M(x) = -(1/12)x³ …….(9)Therefore, at point C, Internal normal force, N(x) = - (2/3)x³Internal shear force, V(x) = 0.0     NInternal bending moment, M(x) = -(1/12)x³, where x is the distance measured from support C.

To know more about Internal Forces visit :

https://brainly.com/question/20639242

#SPJ11

The statement is equivalent to writing 'mischief a2(a1);'. This line of code calls the copy constructor of the class 'mischief' and creates a new object a2 that has the same values as a1.

Regarding invoking the assignment operator for mischief objects. As we know that, an assignment operator is a built-in function, used to copy values from one object to another. In C++, the assignment operator is denoted by the assignment operator (=) sign. It is a binary operator and has a left operand as an object and right operand as the value assigned to the left operand.

In the given problem, we have a class definition that is to be used. Let's first take a look at the definition: class mischief {private: int num; char chr; public: mischief() {num = 1; chr = 'a';}mischief(int n, char c) {num = n; chr = c;}mischief(const mischief& obj) {num = obj.num; chr = obj. chr;}mischief& operator = ( const mischief& obj) {num = obj.num; chr = obj.chr; return *this;}};Here, the assignment operator has been defined as 'mischief& operator = (const mischief& obj).

To know more about code visit:

https://brainly.com/question/30100097

#SPJ11

Invoking the assignment operator for mischief objects is mischief a2 = a1 is explained.

In the given problem statement, invoking the assignment operator for mischief objects is mischief a2 = a1;

The given statement invokes the assignment operator for the class defined previously.

A class is an extensible program-code template for making objects, providing initial values for state (member variables or attributes), and implementations of behavior (member functions or methods).

The user-defined objects are created utilizing the keyword class. The class is a collection of variables and methods.

The assignment operator:

It is a special type of operator that assigns the value of one variable to another.

It is denoted by the symbol ‘=’. It’s not to be confused with the comparison operator ‘==’.

The assignment operator is used for the initialization of variables.

It is used to assign a value to a variable.

Example: int a = 10;

The statement creates an integer variable named “a” and assigns the value 10 to it.

Know more about the assignment operator

https://brainly.com/question/26891746

#SPJ11

Here is the recursive function that compute the combination (n,r) where n >=r and n,r>=0:```
def Comb(n, r): if r == 0 or n == r: return 1 return Comb(n-1, r) + Comb(n-1, r-1)

In the given code, we have defined a function named 'Comb' that takes two parameters, n and r. Inside the function, we have used an if-else statement to check if r is equal to 0 or n is equal to r. If any of these conditions is true, then the function returns 1. Otherwise, the function calculates the combination of (n,r) using the formula "Comb(n,r)= Comb(n-1,r) + Comb( n-1,r-1)".

In detail, the function works in the following way:1. If r = 0 or n = r, then return 1.2. Otherwise, call the Comb function recursively twice with updated parameters: (n-1, r) and (n-1, r-1).3. Add the results obtained in step 2 and return it. Example: Let's say we want to calculate the combination of (4,2). We will call the 'Comb' function with arguments 4 and 2.

To know more about compute visit:-

https://brainly.com/question/31745872

#SPJ11

The smallest acceptable full-depth pinion and gear tooth count to avoid interference is Np = 9 and Ng = 18, respectively.

Given:ϕn = 20°pt = 6 teeth/inψ = 30°r = 2:1 reduction Formula Used:1. Tooth Depth formula: h t = 2.2/PN+2PTNcosϕ2. Circular pitch (p) formula: P = πd/N where, h t = Tooth depth PT = Transverse pressure angle N = Number of teethϕ = Pressure angle P = Circular pitch d = Pitch circle diameter Procedure: First, calculate the value of N using the relation for a 2:1 reduction: R = r = 2:1For this, Let the pinion tooth count be Np and the gear tooth count be Ng.

We will use the formulas of tooth depth and circular pitch to 1. Tooth depth: ht = 2.2/PN+2PTNcosϕIf there is no interference, h t should be smaller than the minimum allowable clearance cmin. This minimum allowable clearance can be taken as c min = 0.1575P + 0.01575 inch for involute gears.ht for pinion and gear teeth must be equal, so we get:2.2/Pp+2PTpcosϕ = 2.2/Pg+2PTgcosϕWe are given: PT = 6 teeth/inϕ = 20°ψ = 30°Np = (1/2)Ng Ng = smallest full-depth gear tooth count.

To know more about  gear visit:

https://brainly.com/question/9505366

#SPJ11

If the resistive current is 2A and the inductive current is 2A, the total current  in the parallel RL circuit is 2.83A.

Since it is a parallel circuit, the voltage across the resistor and inductor are the same. The resistive current and inductive current can be combined to find the total current using the phasor diagram. Therefore, the total current in the parallel RL circuit is equal to the phasor sum of the resistive current and the inductive current.

The phasor diagram is a tool used to represent the resistive and inductive components of the circuit. In a phasor diagram, the resistive current and the inductive current are plotted along the X-axis and Y-axis, respectively. The total current can be calculated by adding the resistive current and inductive current in a vector manner.

To know more about circuit visit:

https://brainly.com/question/32025199

#SPJ11

The total current in the parallel RL circuit is 4 A.

In a parallel RL circuit, the total current is calculated as follows:

Total Current = I1 + I2

Where I1 is the current flowing through the resistor (resistive current) and I2 is the current flowing through the inductor (inductive current).

According to the problem statement, the resistive current is 2 A and the inductive current is also 2 A.

Therefore, the total current is:Total Current = I1 + I2= 2 A + 2 A= 4 A

Therefore, the total current in the parallel RL circuit is 4 A.

In a parallel RL circuit, the voltage across the resistor and the voltage across the inductor are the same.

However, the current through the resistor and the current through the inductor are not the same, since the current through the inductor lags behind the voltage.

Know more about the RL circuit,

https://brainly.com/question/32200985

#SPJ11

This code prompts the user to input a number and stores it in the `usernum` variable. Then, the for loop starts from `usernum` and goes down to -2 (exclusive) with a step size of -1.

The `end=" "` parameter in the `print()` function is used to print the output in a single line separated by spaces.First, we define the starting point of our range using the `usernum` variable that we get from the user input. We then define the end point of our range as -2 (which is exclusive), so the loop will stop at -1. Finally, we set the step size to -1 so that the loop counts down.

The `range()` function returns a sequence of numbers from `usernum` to -2 (exclusive) with a step size of -1. This sequence is used as the input for the for loop.

To know more about code visit:-

https://brainly.com/question/29590561

#SPJ11

The function described in this problem is the RANK. AVG function. This function assigns a rank to each value in a list, with the highest value receiving a rank of 1 and the lowest value receiving a rank equal to the number of values. If there are any ties, the rank for each tied value will be the average of the ranks they would have received if they were not tied.For the five invoices given in the problem, the function RANK.

AVG will return the following values for each row:a. 1, 1, 3, 5, 5 - This means that the first two invoices will receive a rank of 1, the third invoice will receive a rank of 3, and the fourth and fifth invoices will receive a rank of 5.b. 1, 1, 3, 4, 4 - This means that the first two invoices will receive a rank of 1, the third invoice will receive a rank of 3, and the fourth and fifth invoices will receive a rank of 4 (since they are tied).c. 1, 1, 2, 3, 3 - This means that the first two invoices will receive a rank of 1, the third invoice will receive a rank of 2, and the fourth and fifth invoices will receive a rank of 3 (since they are tied).d. 2, 2, 3, 5, 5 - This means that the first two invoices will receive a rank of 2 (since they are tied), the third invoice will receive a rank of 3, and the fourth and fifth invoices will receive a rank of 5.

To know more about invoices visit:

https://brainly.com/question/32170086

#SPJ11

The mapping of addresses to cache blocks and the corresponding hit or miss is as follows:

Cache block 0: miss, miss, miss, miss, hit, miss, hit, missCache block 1: miss, miss, miss, miss, miss, hit, miss, hit, miss, miss, miss, hit

Given sequence of memory access where each address is a byte address:

0, 1, 4, 3, 4, 15, 2, 15, 2, 10, 12, 2

Assuming that the cache is direct-mapped, cache size is 4 bytes, and block size is two bytes;

Let us first calculate the number of blocks in the cache.

`Number of blocks in the cache = cache size / block size = 4/2 = 2`

The memory access addresses are as follows:0, 1, 4, 3, 4, 15, 2, 15, 2, 10, 12, 2

The block containing 0 is mapped to the first block (set 0).

This is a cache miss because the first block is empty.

The block containing 1 is mapped to the first block (set 0).

This is a cache miss because the first block contains the block containing 0.

The block containing 4 is mapped to the second block (set 1).

This is a cache miss because the second block is empty.

The block containing 3 is mapped to the second block (set 1).

This is a cache miss because the second block contains the block containing 4.

The block containing 4 is mapped to the second block (set 1).

This is a cache hit because the second block contains the block containing 4.

The block containing 15 is mapped to the first block (set 0).

This is a cache miss because the first block contains the block containing 0.

The block containing 2 is mapped to the second block (set 1).

This is a cache miss because the second block contains the block containing 4.

The block containing 15 is mapped to the first block (set 0).

This is a cache hit because the first block contains the block containing 15.

The block containing 2 is mapped to the second block (set 1).

This is a cache hit because the second block contains the block containing 2.

The block containing 10 is mapped to the first block (set 0).

This is a cache miss because the first block contains the block containing 0.

The block containing 12 is mapped to the second block (set 1).

This is a cache miss because the second block contains the block containing 2.

The block containing 2 is mapped to the second block (set 1).

This is a cache hit because the second block contains the block containing 2.

Know more about the memory access

https://brainly.com/question/31631484

#SPJ11