Answer:
The correct answer is - C) Jackie may maintain healthy body fat levels.
Explanation:
Jackie has a very active daily and on weekends routine that includes riding the bike, playing volleyball, pushing weeds, and sweeping the porch. The activities that Jackie is performing daily as well as the time that she spends on exercise may help her to maintain body fat levels.
Being physically active helps in maintaining fat levels in the body of an individual, and it is healthy for the individual.
Thus, the correct answer is - C) Jackie may maintain healthy body fat levels.
If a special type of ice has a specific heat capacity of 2060 J/kg K. How
much heat must be absorbed by 2.6 kg of ice at -27.00 C to raise it up to
0.00 C, before any melting takes place?
A. 140,000 J
B. 290,000 J
C. 56,000 J
D. None of the above
Answer:
Q = 144612 Joules.
Explanation:
Given the following data;
Mass = 2.6 kg
Initial temperature = -27°C to Kelvin = 273 + (-27) = 246K
Final temperature = 0°C to Kelvin = 273K
Specific heat capacity = 2060 J/kgK.
To find the quantity of heat absorbed;
Heat capacity is given by the formula;
[tex] Q = mcdt[/tex]
Where;
Q represents the heat capacity or quantity of heat.
m represents the mass of an object.
c represents the specific heat capacity of water.
dt represents the change in temperature.
dt = T2 - T1
dt = 273 - 246
dt = 27 K
Substituting the values into the equation, we have;
[tex] Q = 2.6*2060*27[/tex]
Q = 144612 Joules.
Calculate the amount of heat needed to convert 0.8 kg of ice at -19 °C into water at 29 °C.
What is the equivalent resistance of a circuit that contains four 75.0 resistors connected in parallel with a 100.0 V battery?
Answer:
18.75 ohms.
Explanation:
From the question,
]When four resistors are connected in parallel in a circuit,
The equilvalent resistor is given as
1/R' = 1/R₁+1/R₂+1/R₃+1/R₄............................Equation 1
Where R' = Equivalent resistor.
Given: R₁ = R₂ = R₃ = R₄ = 75.0 ohms.
Substitute these values into equation 1
1/R' = (1/75)+(1/75)+(1/75)+(1/75)
1/R' = 4/75
R' = 75/4
R' = 18.75 ohms.
Hence the equivalent resistance = 18.75 ohms.
Answer:
18.8 ohms
Explanation:
apax
How many joules of heat energy are needed to raise the temperature of 10.0 g (0.0100 kg) of aluminum from 22 K to 55 K, if the specific heat of aluminum is 897 J/kg * K. Explain your answer
Answer:
296.01 J
Explanation:
From the question,
Q = cm(t₂-t₁)....................... Equation 1
Where Q = quantity of heat, c = specific heat capacity of aluminium, m = mass of aluminium, t₁ = Initial temperature, t₂ = Final temperature
Given: c = 897 J/kg.K, m = 0.01 kg, t₁ = 22 K, t₂ = 55 k
Substitute these values into equation 1
Q = 897×0.01×(55-22)
Q = 897×0.01×33
Q = 296.01 J
Hence 296.01 Joules of heat is required.
Fill in the blanks to complete each statement about energy in Earth’s crust. (use lower case wording only)
Plate movements on Earth’s crust create
.
This adds energy to the crust, which then bends and breaks, forming
.
Answer:
stress and fault
Explanation:
yes
Answer:
Stress for the first one and the second faults
Explanation:
What are the 3 basic parts of an atom and what are their charges?
Answer:
electrons neutrons and protons
Explanation:
electron are negative
nuetron are neutral
protons are positive
Convection currents will transfer heat throughout a gas until what condition arises?
A.
The gas condenses and forms a liquid.
B.
The gas particles stop moving entirely.
C.
The gas has the same temperature throughout.
D.
The gas has no thermal energy in it.
Answer:
C
Explanation:
pls mark brainlest ty
have a good day
The gas has the same temperature throughout. (C)
40 g of which substance is saturated in 100 g of water at a temperature of 50°C?
A
KCI
B
Nacl
C
KNO3
D
NH4Cl
please help , its due soon
In an example food chain, mice only eat plants, and then snakes eat the mice. These snakes are examples of consumers.
a Quaternary
b Primary
c Secondary
d Tertiary
The reason that worlds like the Earth are differentiated is that Group of answer choices the heat of the Sun vaporized much of their solid material early on the heaviest chunks that hit early on were able to bore through solid rock to the center the continuing impacts on a growing protoplanet eventually melted the entire body large amounts of hydrogen and helium collect around such planets a little later in their history planetesimals with different types of composition hit at different times, with the heaviest ones hitting first
Answer:
A differentiated body is a body that has been heated to the point where it is are further from the sun larger have no solid surface and have many more moons Smaller chunks of material vaporize completely as they pass through its atmosphere
Explanation:
Hope it helps..A body is said to be differentiated when it has been heated to the extent where it is bigger, farther from the sun, has no hard surface, and has a lot more moons. Smaller pieces of the materials entirely evaporate as they pass through their environment.
What is Planet?An enormous, spherical celestial object known as a planet is neither a star nor a remain. The nebular theory, which states that an interstellar cloud collapses out of a nebula to form a young protostar that orbits the sun by a protoplanetary disk, is now the best argument for planet formation. By slowly accumulating material under the influence of gravity, or accretion, planets form in this disk.
The terrestrial planets Mercury, Venus, Earth, and Mars, as well as the planetary nebulae Jupiter, Saturn, Uranus, and Neptune, total at least eight planets in the Solar System. These planets all rotate around axes that seem to be inclined relative to their corresponding polar axes.
To know more about Planet:
https://brainly.com/question/14581221
#SPJ2
water flows in a pipe of a terminal of A1=0.02 m2 with a speed of V1=2 m/s. At the second end of the pipe A2=0.04 m2, the speed of flow is V2=_______m/s
When air warm up the air molecules move slower?
Caroline uses 20 N of force to move a box of books 10 m. How much work
did she do?
Work = (force) x (distance)
Work = (20 N) x (10 m)
Work = 200 Joules
For a system mass of 600g and a hanging weight of 0.50 N, determine the acceleration of the system
Answer:
A=0.80
Explanation:
a=2×100/time^2. a=2×100/15.86^2. = a=0.80
The acceleration of the system will be 0.833 meters per second square.
What is newton's second law?The behavior of things is predicted by Newton's first rule of motion when all external forces are equal. The first law, sometimes known as the law of inertia, asserts that if an entity's energies are balanced, its acceleration will be zero meters per second.
When all forces are balanced, an object is said to be in equilibrium and won't accelerate. Newton postulated that an item will only accelerate in the presence of a net or uneven force. An object will accelerate if there is an imbalanced force present, altering its direction, speed, or both.
Let 'm' be the mass of the object in kilogram and 'a' is the acceleration of the object in meters per second square. Then the force on the system is calculated as,
F = ma
For a system mass of 600g and a hanging weight of 0.50 N. Convert the mass of the object into kilogram. Then we have
m = 600 / 1000
m = 0.6 kg
Then the acceleration of the system will be calculated as,
0.50 = 0.6 × a
a = 0.833 meters per second square
The acceleration of the system will be 0.833 meters per second square.
More about newton's second law link is given below.
https://brainly.com/question/13447525
#SPJ2
Which of the following statements is correct A. College degree isn't as important as it was in the past b. Over time, I can earn more money by not going to college c. College graduates earn about double the income of high school graduates d. The money I make after college does not compensate for the four years I spent in college
Answer:
I'd say C is the answer they want, though my pedantic side wants to argue for B being true as well.
Answer: C. College graduates earn about double the income of high school graduates.
Explanation: I just took the quiz :)
electromagnetic wav
Answer:
e search mo sa utak mo kasi di mo alam
What should food workers do to prevent chemical hazards from contaminating food?
A. Wash their hands after taking out the garbage
B. Wear a hair net when working for food preparation areas
C. Store cleaning solutions and bottles away from food storage areas
D. Clean and San at is equipment and utensils for after hours of continuous use
Which is a disadvantage of using wind as an energy source?
It may be unreliable.
It is not naturally occurring.
It produces a lot of waste.
It generates large amounts of electricity.
Answer:
it produces
Explanation:
a lot of waste
In an ecosystem,disadvantage of using wind as an energy source is that it produces a lot of waste.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/13979184
#SPJ7
How do you increase mechanical energy
Answer:
If an object moves in the opposite direction of a conservative net force, the potential energy will increase; and if the speed (not the velocity) of the object changes, the kinetic energy of the object also changes.
Explanation:
Hope i explained that clearly... :)
what color of colors of light does red glass absorb
Ocean breezes are due to which method of heat transfer?
A. conduction
B. convection
C. greenhouse gases
D. radiation
E. geothermal energy
Ocean breezes are primarily due to convection, which is the transfer of heat through the movement of fluids or gases. The correct option is B.
What is convection?Convection is a method of heat transfer that occurs in fluids (liquids and gases) and involves the movement of material carrying thermal energy. In convection, heat is transferred by the movement of hot fluid from one place to another, which then causes the transfer of heat from the hot fluid to the cooler fluid or surface it comes into contact with.
Convection can occur in two ways:
Natural convection: It occurs due to the density differences caused by temperature variations within a fluid. When a fluid is heated, its density decreases, making it lighter and causing it to rise. As it rises, it cools, becomes denser and falls back down, creating a cycle that is known as a convection current.
Forced convection: In this type of convection, a fluid is forced to flow over a surface or through a channel, by an external agent like a fan or pump. The forced flow enhances the rate of heat transfer from the surface or through the channel, as compared to natural convection, where the fluid flow is driven only by buoyancy forces.
Convection is a very important process for heat transfer in many natural and industrial applications, including heating and cooling systems, meteorology, oceanography, and more.
Here in the Question,
Ocean breezes are primarily due to convection, which is the transfer of heat through the movement of fluids or gases. As the sun heats up the surface of the ocean, the air above it also heats up and rises. This creates a low pressure area that draws in cooler air from over the land, resulting in a breeze that blows from the ocean towards the shore. This is why sea breezes are generally felt during the day, when the land is warmer than the sea, and why they tend to die down at night, when the opposite occurs.
Therefore, The correct answer is B i.e convection.
To learn about the difference between conduction and convection click:
https://brainly.com/question/13104912
#SPJ7
PLEASE HELP—ITS PHYSICS AND I NEED ANSWERS ASAP
if the temperature is constant and the pressure increases, then the volume will ____.
if a car exerts a area of 3m and a force of 9N what is the pressure exerted by car
Answer:
P = 3 Pa
Explanation:
Given that,
Force exerted by the car, F = 9 N
The area of the car, A = 3 m²
We need to find the pressure exerted by the car. We know that pressure is equal to the force per unit area such that,
[tex]P=\dfrac{F}{A}\\\\P=\dfrac{9\ N}{3\ m^2}\\\\P=3\ Pa[/tex]
So, the pressure exerted by the car is equal to 3 Pa.
PLEASE HELLP ILL GIVE CROWN AND HEART
Surface currents in major oceans generally circulate in a ________ direction in the northern hemisphere.
A ) Clockwise
B ) Counter-clockwise
C ) Northern
D ) Southern
Answer:
Anti clockwise
hope it helps u
please mark me brailliest
A golf club with mass 0.5 kg is swung at 23 m/s toward a stationary golf ball on a tee. The club barely slows down to 17 m/s, but the ball flies off the tee at 69 m/s. Calculate the mass of the golf ball in kg. Answer to 4 decimals. Help fast please. Will mark brainliest
Answer:
I gotchu fam. 0.0435 kg
Explanation:
m1v1+m2v2=m1v1f+m2v2f
(0.5)(23)+(m2)(0)=(0.5)(17)+(m2)(69)
11.5=8.5+69m2
3=69m2
0.0435 kg
To 3 significant digits, what is the period of the pendulum using the equation for the period of a simple pendulum? Hint, the information you need is on the right side of the screen. The equation for the period of a pendulum is: T = 24 V
Answer:
1.42 seconds
Explanation:
T=2*pi*(sqrt length over gravity)
T=2*pi*(sqrt 0.5/9.8)
T=1.4189
Round to 3 significant digits
T=1.42 seconds
What determines the
carrying capacity in an
ecosystem?
A. The number of different species in
the ecosystem
B. Limiting factors
C. Only biotic factors
D. Only abiotic factors
Answer:
Your answer is B. Limiting factors
Explanation:
Brainliest pleaseeee
2. A child swings back and forth on a swing with no friction or air resistance between points X and Z, as shown. Point Y is the lowest point in the swing, where height is zero. Which of the following is equal to the kinetic energy of the child at point Y?
(A) The kinetic energy of the child at point X.
(B) The kinetic energy of the child at point Z.
(C) The potential energy of the child at point Y.
(D) The potential energy of the child at point Z.
Answer:
c
Explanation:
Una pelota recorre 20 m hacia la derecha y luego 10 m hacia la izquierda, todo en un lapso de tiempo de 10 s , cual es si velocidad y rapidez?
Answer:
v = 1 i ^ m / s, v = 1 m / s
Explanation:
In this problem we show the difference between vectors and scalars.
The average speed is
v = Δx / Δt
The bold are vectors
Δx = 20-10 = 10 i^ m
v = 10/10
v = 1 i ^ m / s
the unit vector indicates that the velocity is on the x-axis
The average speed is
v =Δx / Δt
v = 10/10
v = 1 m / s
in this case we have a scalar