a. The initiative that may not be considered as part of the company's CSR efforts is:
c. Training customer service employees on the latest upgrade to the technology used to take orders from customers.
CSR (Corporate Social Responsibility) efforts are focused on the company's impact on society and the environment. Hosting a health and wellness fair (a) benefits both employees and the community, investing in equipment to reduce plastic waste (b) contributes to environmental sustainability, and installing a cafeteria and coffee shop (d) addresses employee well-being. These initiatives align with CSR goals.
However, training customer service employees on the latest technology upgrade (c) is more aligned with improving internal operations and efficiency rather than directly addressing social or environmental concerns, which are the core aspects of CSR.
b. The false statement regarding integrating CSR activities into Harrison Company's core strategy is:
d. Harrison will have to remove one of the original four perspectives from its BSC and include CSR activities in a separate performance perspective because the BSC can have a maximum of four perspectives.
The Balanced Scorecard (BSC) is a strategic management framework that typically consists of four perspectives: financial, customer, internal processes, and learning and growth. Integrating CSR activities into the BSC does not require removing one of the original perspectives. Instead, Harrison Company can include CSR activities in a separate corporate social responsibility performance perspective (b) or integrate CSR strategic objectives into the four original perspectives of the BSC (c). This allows CSR efforts to be aligned with and integrated into the core strategy without limiting the number of perspectives in the BSC (d).
c. To minimize common measures bias when developing divisional balanced scorecards for unique divisions within a corporation:
d. One division may focus more heavily on a subset of the four perspectives, for example on learning and growth and internal processes, while other divisions focus on different perspectives, such as customer and financial.
Common measures bias refers to using the same performance measures across all divisions, which may not adequately capture the unique aspects and goals of each division. To minimize this bias, divisions should focus on different perspectives based on their specific objectives and strategies. Each division does not need to equally focus on all four perspectives (c). Instead, divisions can have different emphases, such as one division focusing more on learning and growth and internal processes, while others focus on different perspectives like customer and financial (d). This ensures that the balanced scorecards for divisions reflect their distinct strategies and priorities.
To know more about CSR , visit
https://brainly.com/question/1373962
#SPJ11
ABC Ltd makes a special type of electronic components. The unit cost of making this component is as follows: Cost per Unit (R) Direct materials 6 Direct labour 4 Variable overhead 1 Supervisory costs 3 Equipment depreciation 2
Allocated general overhead 5 Total unit cost 21 The equipment used to manufacture the component has no resale value. General overhead is allocated on the basis of direct labour hours. The R21 total unit cost is based on 20,000 components produced each year. An outside supplier has offered to provide the 20,000 components at a cost of R13.50 per unit.
Required:
4.1 Advise the company on whether it should accept the offer of the outside supplier or not by preparing an analysis of the costs. (10)
4.2 The easiest way to distinguish between relevant & irrelevant costs is by cost behaviour; variable costs are relevant costs & fixed costs are not. Explain briefly why you might agree or disagree with this statement.(5)
4.1: ABC Ltd should accept the offer of the outside supplier as it would result in cost savings.
4.2: The statement that variable costs are relevant costs and fixed costs are not is not entirely accurate; relevance of costs depends on the context and decision being made.
Should ABC Ltd accept the offer?
4.1: In order to determine whether ABC Ltd should accept the offer of the outside supplier, we need to compare the total cost of producing 20,000 components internally with the cost offered by the supplier.
Internal production cost:
Direct materials: 6 * 20,000 = R120,000
Direct labor: 4 * 20,000 = R80,000
Variable overhead: 1 * 20,000 = R20,000
Supervisory costs: 3 * 20,000 = R60,000
Equipment depreciation: 2 * 20,000 = R40,000
Allocated general overhead: 5 * 20,000 = R100,000
Total internal production cost = R120,000 + R80,000 + R20,000 + R60,000 + R40,000 + R100,000 = R420,000
Cost offered by the outside supplier: R13.50 * 20,000 = R270,000
Comparing the two costs, we find that the cost offered by the outside supplier is lower than the total internal production cost. Therefore, it would be advisable for ABC Ltd to accept the offer of the outside supplier, as it would result in cost savings.
4.2: The statement that variable costs are relevant costs and fixed costs are not is not entirely accurate. While variable costs are generally more directly linked to production volume and are more likely to change with activity levels, fixed costs can still be relevant in certain decision-making scenarios.
Relevance of costs depends on the context and decision being made. In short-term decision-making, such as accepting the outside supplier's offer, variable costs are more relevant as they directly impact the cost of producing each unit. However, fixed costs may still be relevant in long-term decisions, capacity planning, or assessing the overall profitability of a product or business segment.
For example, in analyzing the profitability of a product line, fixed costs such as equipment depreciation and allocated general overhead need to be considered alongside variable costs to determine the full cost and profitability. Ignoring fixed costs could lead to incorrect conclusions about the financial viability of the product.
Therefore, it is important to consider both variable and fixed costs in decision-making, depending on the specific circumstances and the decision at hand.
To know more about variable costs, refer here:
https://brainly.com/question/14083670
#SPJ4
Which of the following is not a type of appraisal
participation?
A.Goal setting
B. time talked
C.Value-expressive voice
D.Opinion expression
E.Tow-way communication
Among the following options, the option that is not a type of appraisal participation is time talked. Hence, the correct option is B.
Appraisal participation is a term that describes a process used by employees and their supervisors to help workers develop new skills, enhance job performance, and improve work quality. During an appraisal, employees are evaluated based on predetermined standards. Appraisals are used to determine whether employees are meeting the company's goals and objectives. They also provide employees with the feedback they need to improve their job performance.
Types of appraisal participation:
Goal setting - Goals can be used as an appraisal tool in which the employee and supervisor collaborate to establish specific, measurable, achievable, realistic, and time-bound (SMART) objectives that will help the employee achieve their job responsibilities.Value-expressive voice - This is a type of appraisal participation that refers to employees who use their voice to express their values, beliefs, or opinions about their job and their employer.Opinion Expression - During the appraisal process, employees can express their opinions about their job and their employer.Tow-way communication - Two-way communication is a type of appraisal participation that encourages open and honest communication between employees and supervisors.Time talked - This is not a type of appraisal participation. Value-expressive voice is a type of appraisal participation that refers to employees who use their voice to express their values, beliefs, or opinions about their job and their employer. This form of communication is important because it helps employees feel valued and heard. It also provides the employer with valuable feedback that can be used to improve employee job satisfaction and retention.You can learn more about appraisal performance at: https://brainly.com/question/15169473
#SPJ11
What is the value of a building that is expected to generate fixed annual cash flows of $2,257.00 every year for a certain amount of time if the first annual cash flow is expected in 3 years and the last annual cash flow is expected in 9 years and the appropriate discount rate is 16.30 percent? $6679.93(plus or minus $10) $5245.13 (plus or minus $10) O $6100.08 (plus or minus $10) O $5743.71 (plus or minus $10) O None of the above is within $10 of the correct answer
To calculate the value of the building, we need to find the present value of the fixed annual cash flows, the value of the building, based on the given cash flows and discount rate, is approximately $6,679.93.
The formula for the present value of an annuity is:
PV = CF * [1 - (1 + r)^(-n)] / r
Where:
PV is the present value of the annuity
CF is the fixed annual cash flow
r is the discount rate
n is the number of years
In this case, the fixed annual cash flow is $2,257.00, the discount rate is 16.30%, and the cash flows are expected for a period of 9 - 3 = 6 years.
Let's substitute the values into the formula:
PV = $2,257.00 * [1 - (1 + 0.163)^(-6)] / 0.163
By performing the calculation, we find:
PV ≈ $5,721.85
Therefore, the value of the building, given the specified cash flows and discount rate, is approximately $5,721.85. None of the provided answer options are within $10 of the correct answer.
To know more about cash click the link below:
brainly.com/question/31086376
#SPJ11
clear explanations only
Styles Issue The following transactions relate to a raw material for a period: Day Units Transaction Balance b/f Total value ($) 1 100 500 3 4 Receipt 50 275 6 Receipt 50 300 7 Issue 70 The weighted a
The given table shows the transactions related to a raw material for a period, with the balance being carried forward from the previous day. On the third and sixth day, receipts of 50 units were made at different values.
On the seventh day, an issue of 70 units was made. The total value of raw material units and the weighted average cost can be calculated using this information.
The table represents the inventory system that a company uses to track the value and units of its raw materials. The balance b/f, which means balance brought forward,
indicates that there was some raw material units left from the previous period, which is included in the transaction of day 1.
On day 3 and 6, 50 units each were received, but at different values. This indicates that the raw material units received were not of the same quality or price,
hence it is important to calculate the weighted average cost. On day 7, 70 units were issued, which should be subtracted from the balance to determine the closing balance.
The total value of raw material units can be calculated by multiplying the number of units with their respective values on each respective day. The weighted average cost can be calculated using the total value and total units received.
This information can be used for tracking the inventory cost and for making informed business decisions.
Learn more about transactions here.
https://brainly.com/questions/24730931
#SPJ11
Trek Company has the following production data for April: units transferred out 40,000 and ending work in process 5,000 units that are 100% completed for material and 40% complete for conversion costs. If unit materials cost is $4 and unit conversion cost is $7, determine the cost to be assigned to the units transferred out and the units in ending work in process.
The cost to be assigned to the 5,000 units in ending work in process is $34,000.
The total cost to be assigned to the 40,000 units transferred out will be calculated as follows:
Total Cost = (Units Transferred Out x Total Unit Cost)
Total Unit Cost = (Unit Material Cost + Unit Conversion Cost)
Total Unit Cost = ($4 + $7)
Total Unit Cost = $11
Total Cost = (40,000 x $11)
Total Cost = $440,000
Therefore, the cost to be assigned to the 40,000 units transferred out is $440,000.
The cost to be assigned to the 5,000 units in ending work in process that are 100% completed for material and 40% complete for conversion costs will be calculated as follows:
Total Cost = (Units in Ending Work in Process x Total Unit Cost)
Total Unit Cost = [(Unit Material Cost x 100%) + (Unit Conversion Cost x 40%)]
Total Unit Cost = [($4 x 100%) + ($7 x 40%)]
Total Unit Cost = ($4 + $2.80)
Total Unit Cost = $6.80
Total Cost = (5,000 x $6.80)
Total Cost = $34,000
learn more about ending work here:
https://brainly.com/question/14960599
#SPJ11
Which of the following must be displayed prominently in a headquarters, satellite office of the establishing agent or broker, by the supervising person(s) responsible for that place of business? A. Certificate of occupancy B. College Degree
C. License of supervising person D. Professional affiliates
Option C. License of supervising person is the correct option.The license of the supervising person(s) responsible for the place of business must be displayed prominently in a headquarters or satellite office of the establishing agent or broker.
The license of the supervising person(s) is a crucial document that demonstrates their qualifications and legal authority to operate in the real estate industry. It is a requirement in many jurisdictions for individuals involved in real estate activities to hold a valid license. Displaying the license prominently in the headquarters or satellite office serves as a visual indication of compliance with regulatory requirements and provides transparency to clients and customers. On the other hand, a certificate of occupancy is a document issued by a local government agency indicating that a building complies with building codes and is suitable for occupancy.
While this certificate is important for the lawful use of the premises, it may not necessarily need to be displayed prominently in a real estate office. Items like a college degree or professional affiliates, while they may hold significance in terms of individual qualifications and affiliations, do not have specific requirements for being displayed in a real estate office. The focus is primarily on the license of the supervising person(s) as it directly relates to their authority to engage in real estate activities.
Lear more about license here: https://brainly.com/question/31370595
#SPJ11
Supplier rationalization leads towards the centralization of the purchasing organization in most cases. If an organization chooses the "Corporate purchasing" approach, which of the following is its main trait? a) New unit established but does not make decisions b) New unit established charged with making decision c) Individual sites manage their decisions d) One site, business or territory takes on main responsibility
If an organization chooses the "Corporate purchasing" approach, the main trait associated with it is that **one site, business, or territory takes on the main responsibility** for purchasing decisions.
In this approach, purchasing decisions are centralized within a specific location or entity within the organization. This central unit is responsible for making decisions regarding the procurement of goods and services on behalf of the entire organization or multiple sites. The centralization allows for better coordination, consolidation of purchasing power, and potential cost savings through economies of scale.
Learn more about Corporate purchasing here:
https://brainly.com/question/2681728
#SPJ11
Required January February Beginning inventory 0 300 300 Production 1,000 800 1,250 Sales 700 800 1,500 Variable costs 900 900 $ 900 Manufacturing cost per unit produced Operating (marketing) cost per unit sold Fixed costs $ 600 $ 600 $ 600 $400,000 $400,000 $400,000 Manufacturing costs Operating (marketing) costs $140,000 $140,000 $140,000 The selling price per unit is $2,500. The budgeted level of production used to calculate the budgeted fixed manufacturing cost per unit is 1,000 units. There are no price, efficiency, or spending variances. Any production-volume variance is written off to cost of goods sold in the month in which it occurs. 1. Prepare income statements for BigScreen in January, February, and March of 2012 under (a) variable costing and (b) absorption costing
(a) Under variable costing, the income statements for Big Screen in January, February, and March 2012 (b) Under absorption costing, the income statements for Big Screen in January, February, and March 2012.
(a) In variable costing, only variable costs (direct materials, direct labor, and variable overhead) are considered as product costs. Fixed manufacturing costs are treated as period costs and are expensed in the period incurred. (b) In absorption costing, both variable and fixed manufacturing costs are considered as product costs and are allocated to the units produced. The income statement will include sales, cost of goods sold (including fixed manufacturing costs), and the resulting net income, which will be consistent across the months.
learn more about:- Manufacturing costs here
https://brainly.com/question/21306513
#SPJ11
At April 1,2000 Farm Com. purchased 10000 bonds of X company 882000 $ and paid 1000 $ as a fee to the dealer plus accrued interest at the purchases date. The bond hold 8% paid at Jan.1 and July 1,the maturity date is Jan.1, 20100 At August 1, 2005 the Farm Com. Sold 4000 bods of X Company at 95 $ per bond and paid 400 $ as selling fee. Required: 1) Prepare the entry during 2000. 2) Prepare the entry during 2005.
Amount received from sale of bonds = 4,000 bonds x $950 per bond = $3,800,000) (Selling fees = 4,000 bonds x $10 per bond = $40,000) (Gain on sale of investment = $3,800,000 - $380,000 - $33,333 - $4,000,000 = $52,000).
1) Prepare the entry during 2000 DATE ACCOUNT TITLE DEBIT CREDIT April 1, 2000 Investment in Bonds of X Company 882,000 Cash 882,000 (Assuming no interest was accrued until the purchase date) 2) Prepare the entry during 2005 DATE ACCOUNT TITLE DEBIT CREDIT AUG 1 Investment in Bonds of X Company 380,000 Gain on Sale of Investment in Bonds of X Company 52,000 Accrued Interest Receivable 16,000 Investment in Bonds of X Company 468,000 Cash 456,000 Selling Fees 400,000 Gain on Sale of Investment in Bonds of X Company 52,000 (Amount of bonds sold = 4,000 bonds x $1,000 per bond = $4,000,000) (Accrued interest = $1,000,000 x 8% x 5/12 = $33,333) (Amount received from sale of bonds = 4,000 bonds x $950 per bond = $3,800,000) (Selling fees = 4,000 bonds x $10 per bond = $40,000) (Gain on sale of investment = $3,800,000 - $380,000 - $33,333 - $4,000,000 = $52,000).
To know more about interest visit:
https://brainly.com/question/30393144
#SPJ11
A Company manufactures and sells one product. The product has the following cost and revenue data: Selling price Per Unit (AED) 71 Variable cost Per Unit (AED) 25 Total fixed expenses per month are as follows: Expenses types AED Advertising 200,000 Rent 100,000 Heating 100,000 The company produced and sold 10,000 units during the month and had no beginning or ending inventories. a. If the sales increase by 200 units, by how much well the net operating income (profit) increase? S
Increasing sales by 200 units will lead to an increase in net operating income (profit), but the exact amount depends on the contribution margin per unit.
To calculate the increase in net operating income (profit) resulting from an increase in sales by 200 units, we need to consider the contribution margin per unit. The contribution margin represents the amount of revenue left after deducting variable costs and is used to cover fixed expenses and generate profit.
Given that the selling price per unit is AED 71 and the variable cost per unit is AED 25, the contribution margin per unit can be calculated as AED 71 - AED 25 = AED 46.
With an increase in sales by 200 units, the additional contribution to net operating income can be found by multiplying the contribution margin per unit (AED 46) by the increase in units sold (200 units). Therefore, the net operating income will increase by AED 46 * 200 = AED 9,200.
It's important to note that this calculation assumes that fixed expenses remain unchanged. If there were any changes in fixed expenses due to the increase in sales, the impact on net operating income would need to be considered as well.
Learn more about Revenue here: brainly.com/question/32455692
#SPJ11
to which african economic organization does south africa belong?
South Africa is a member of the African Union (AU). The African Union is a continental organization consisting of 55 member states in Africa.
It was established in 2002 and aims to promote unity, cooperation, and development among African nations. The AU focuses on various areas such as political integration, economic development, peace and security, and social progress.
South Africa, as one of the member countries, actively participates in the AU's activities, initiatives, and decision-making processes to contribute to the development and advancement of the African continent as a whole.
Learn more about cooperation here:
https://brainly.com/question/7033209
#SPJ11
Suppose that nominal GDP was $9500000.00 in 2005 in Montgomery County Maryland. In 2015, nominal GDP was $11500000.00 in Montgomery County Maryland. The price level rose 2.00% between 2005 and 2015, and population growth was 4.25%. Calculate the following figures for Montgomery County Maryland between 2005 and 2015. Give all answers to two decimals. % a. Nominal GDP growth was See Hint Part 2 (0.5 point) b. Economic growth was See Hint Part 3 (0.5 point) c. Inflation was Part 4 (0.5 point) See Hint d. Real GDP growth was Part 5 (0.5 point) See Hint OF 120ESTIONS COMPLETED N 10 b. Economic growth was Part 3 (0.5 point) c. Inflation was Part 4 (0.5 point) d. Real GDP growth was Part 5 (0.5 point) e. Per capita GDP growth was Part 6 (0.5 point) Real per capita GDP growth was % %. See Hint See Hint See Hint See Hint
a. To calculate the nominal GDP growth, we subtract the initial nominal GDP from the final nominal GDP and divide it by the initial nominal GDP, then multiply by 100.
Nominal GDP growth = ((Final nominal GDP - Initial nominal GDP) / Initial nominal GDP) * 100
= (($11,500,000 - $9,500,000) / $9,500,000) * 100
= ( $2,000,000 / $9,500,000) * 100
= 21.05%
b. Economic growth can be calculated by adjusting the nominal GDP growth for inflation.
Economic growth = Nominal GDP growth - Inflation rate
= 21.05% - 2.00%
= 19.05%
c. The inflation rate is given as 2.00%.
d. Real GDP growth is calculated by subtracting the inflation rate from the nominal GDP growth.
Real GDP growth = Nominal GDP growth - Inflation rate
= 21.05% - 2.00%
= 19.05%
e. To calculate per capita GDP growth, we need to consider the population growth as well.
Per capita GDP growth = Real GDP growth - Population growth
= 19.05% - 4.25%
= 14.80%
Real per capita GDP growth = Per capita GDP growth - Inflation rate
= 14.80% - 2.00%
= 12.80%
Learn more about GDP visit:
brainly.com/question/30504843
#SPJ11
QUESTION 39 Market/Product positioning seeks to put a product in a certain position in a. supermarket shelves Ob. minds of consumers C. company's cost structure company's human resources d. 00
Market/Product positioning seeks to put a product in a certain position in minds of consumers
Market/product positioning is a marketing strategy that aims to create a specific perception or image of a product or brand in the minds of consumers. It involves differentiating the product from competitors and establishing a unique position in the target market. The goal is to create a favorable and distinct perception of the product in the minds of consumers, emphasizing its unique features, benefits, or value proposition. This positioning helps consumers understand and associate the product with specific attributes, values, or benefits, which in turn influences their purchasing decisions.
Know more about Market/Product positioning here:
https://brainly.com/question/29435592
#SPJ11
Sheffield Co. sells $423,000 of 12% bonds on June 1, 2020. The bonds pay interest on December 1 and June 1. The due date of the bonds is June 1, 2024. The bonds yield 10%. On October 1, 2021, Sheffield buys back $131,130 worth of bonds for $136,130 (includes accrued interest). Give entries through December 1, 2022.
Prepare a bond amortization schedule using the effective-interest method for discount and premium amortization. Amortize premium or discount on interest dates and at year-end. (Round answers to 0 decimal places, e.g. 38,548.)
To prepare a bond amortization schedule using the effective-interest method for discount and premium amortization, you can follow these steps:
Calculate the present value of the bonds using the yield rate of 10% and the cash flows of $42,300 per year for four years and a final payment of $423,000.
Record the purchase of the bonds on June 1, 2020.
Record the buyback of $131,130 worth of bonds on October 1, 2021.
Prepare an amortization schedule using the effective-interest method for discount and premium amortization.
Here’s an example of how to prepare an amortization schedule using the effective-interest method:
Date Cash Received Interest Expense Amortization Book Value
6/1/2020 $423,000
12/1/2020 $21,150 $42,300 ($21,150) $401,850
6/1/2021 $21,150 $40,185 ($18,150) $383,685
10/1/2021
12/1/2021 $21,150 $38,369 ($16,369) $365,316
6/1/2022 $21,150 $36,831 ($14,831) $346,485
12/1/2022 $21,150 $35,546 ($13,546) $327,939
The cash received column shows the amount of cash received from interest payments and bond buybacks.
The interest expense column shows the amount of interest expense calculated using the effective interest method.
The amortization column shows the amount of premium or discount amortized on each interest date and at year-end.
The book value column shows the book value of the bonds after each interest payment and bond buyback.
To know more about interest
https://brainly.com/question/13612376
#SPJ11
From the following details find out the credit purchases and total purchases: Cash purchases Opening balance of bills payable Opening balance of Creditors Opening balance of bills payable Closing balance of Creditors Cash paid to Creditors Bills payable paid during the year Purchases Returns Allowance from Creditors Bills payable dishonoured
To accurately calculate credit purchases and total purchases, we would need the following additional information:
Opening balance of Creditors: The amount of outstanding payable to creditors at the beginning of the period. The closing balance of Creditors: The amount of outstanding payable to creditors at the end of the period. Cash paid to Creditors: The total amount of cash paid to creditors during the year. Bills payable paid during the year: The total amount of bills payable that were paid off during the year.
Purchases Returns: The total amount of goods returned to the suppliers.
Allowance from Creditors: Any discounts or allowances received from the creditors.
Bills payable dishonored: The number of bills payable that were not honored or paid on their due dates.
Once we have all the necessary information, we can calculate the credit purchases and total purchases by considering the opening and closing balances, cash payments, returns, allowances, and dishonored bills payable.
Learn more about credit purchases and total purchases here:
https://brainly.com/question/31962914
#SPJ11
What is the agency problem?
Select one:
1.
Finding the right agent to blame
2.
Difficulty for agencies to find right staff
3.
Conflict between management and employees
4.
Conflict between owne
The agency problem refers to a conflict of interest that arises when one party, known as the principal, delegates decision-making authority to another party, known as the agent.
The principal-agent relationship exists in various contexts, such as between shareholders and company management, or between clients and hired professionals. The problem stems from the misalignment of incentives and goals between the principal and the agent, which can lead to conflicts and suboptimal outcomes.
In this context, option 3, "Conflict between management and employees," is the most accurate description of the agency problem. The conflict typically arises when managers, as agents, make decisions that prioritize their own interests or objectives over those of the employees or shareholders they represent. This misalignment can manifest in various forms, such as excessive executive compensation, neglecting employee welfare, or pursuing short-term gains at the expense of long-term sustainability. The agency problem can undermine trust, create inefficiencies, and impede organizational performance. Various mechanisms, such as performance-based incentives, monitoring systems, and transparent communication, are employed to mitigate the agency problem and align the interests of principals and agents.
To learn more about agency here brainly.com/question/30556993
#SPJ11
short explanation please
Discuss 2 explanations economists give for the slow recovery after the Great Recession.
Economists have two main explanations for the slow recovery after the Great Recession. Firstly, they argue that there was a lack of fiscal policy measures, and secondly, they contend that the problems were structural.
Economists have two main explanations for the slow recovery after the Great Recession. Firstly, they argue that there was a lack of fiscal policy measures, which is the primary reason behind the slow recovery. The policymakers, according to this view, failed to adopt expansionary fiscal policies to promote economic growth. This contributed to the prolongation of the recession, as fiscal policy measures could have increased aggregate demand and boosted economic growth.
Secondly, economists contend that the problems were structural, which means that the economy was plagued by deep-seated issues that could not be addressed by traditional monetary and fiscal policies. This structural problem led to a prolonged recession and slow recovery because it required structural changes to address. Thus, economists believe that the combination of insufficient fiscal policy measures and structural problems in the economy contributed to the slow recovery after the Great Recession.
To know more about the Recession visit:
https://brainly.com/question/12878456
#SPJ11
Please answer the following questions in no more than 500 words based on the following posed Microeconomic concept: There is an innovative and more effective new drug on the market that manages high blood pressure. The drug manufacturer has applied for and received a patent.
Describe the different type of costs to produce the drug. Categorize the costs by fixed and variable, and then indicate/describe the profit-maximizing condition.
What happens in the market for other high blood pressure drugs, that are not as effective? Consider which curve shifts and the corresponding change in equilibrium price and quantity.
Compare the equilibrium price and quantity for the drug under the patent conditions relative to if the market were opened to perfectly competitive forces. Explain the main characteristics of each market structure.
Why would you or would you not allow this new drug to be available through a patent?
In answering these questions, the student should be able to:
Demonstrate the knowledge of basic elements and concepts of microeconomics.
Identify economic resources and their use.
Differentiate production under pure competition, and monopoly but no errors in economic reasoning.
The concept discussed is about an innovative drug for treating high blood pressure. The drug manufacturer received a patent for this new drug, and hence the cost involved in its production can be categorized as fixed and variable costs.
The profit-maximizing condition suggests that the cost per unit of production should be equal to the marginal revenue.
The costs involved in the production of drugs are categorized as fixed and variable costs. The fixed costs are those that remain the same irrespective of the quantity of production, whereas the variable costs change with the level of production.
In the context of the high blood pressure drug, the fixed cost would include the expenses incurred in researching, developing, and advertising the drug.
The variable cost would involve the cost of producing each unit of the drug, such as the cost of raw materials and labor. The profit-maximizing condition suggests that the cost per unit of production should be equal to the marginal revenue.
This means that the total revenue generated by producing one more unit of the drug should be equal to the cost incurred to produce that unit.
The introduction of this new and more effective drug will impact the market for other high blood pressure drugs that are not as effective. This is because the demand for the less effective drugs will decrease as consumers switch to the new and innovative drug.
As a result, the demand curve for less effective drugs will shift to the left, leading to a decrease in the equilibrium price, and quantity.
On the other hand, the demand for the new drug is expected to increase, leading to a shift in the demand curve to the right, and hence an increase in both equilibrium price and quantity.
The equilibrium price and quantity for the new drug under the patent condition will be higher than in a perfectly competitive market.
In a perfectly competitive market, there is free entry and exit of firms, and hence, there is no monopoly, unlike in the case of a patent.
Under a patent, the manufacturer has the exclusive right to produce and sell the drug. The patent allows the manufacturer to charge a higher price than the marginal cost, leading to a higher profit margin.
In contrast, in a perfectly competitive market, the equilibrium price is equal to the marginal cost of production, and hence, the profit margin is lower.
The decision to allow the new drug to be available through a patent depends on various factors. One advantage of a patent is that it encourages innovation by providing a financial incentive to the manufacturer.
In addition, it allows the manufacturer to recover the cost involved in researching and developing the drug.
However, a patent gives the manufacturer a monopoly and hence the ability to charge a higher price than the marginal cost, leading to higher profits.
This, in turn, may lead to a high price for the consumers, making the drug less accessible and less affordable to some.
Therefore, it is a trade-off between promoting innovation and ensuring that drugs are accessible to everyone.
Learn more about monopoly here.
https://brainly.com/question/27324976
#SPJ11
Identify the four basic strategic approaches that MNCs use for
planning and updating their operations.
Multinational corporations (MNCs) use various strategic approaches for planning and updating their operations.
The four basic strategic approaches are:
1. Global Standardization Strategy: This approach focuses on standardizing the products, services, and operations across the globe to achieve economies of scale and cost efficiency.
2. Localization Strategy: This approach emphasizes adapting to local markets by customizing products, services, and operations to meet the unique needs and preferences of local customers.
3. Transnational Strategy: This approach combines the global standardization and localization strategies to create a hybrid strategy that balances global efficiency and local responsiveness.
4. International Strategy: This approach involves limited global integration and focuses on serving only a few international markets, usually through exporting products and services.
Each of these approaches has its own advantages and disadvantages, and MNCs must carefully evaluate which strategy best aligns with their goals, resources, and external environment. The choice of strategic approach will determine how the MNC operates and competes in the global marketplace.
To know more about Multinational corporations visit:
https://brainly.com/question/29546264
#SPJ11
The income statement for the month of June of Camera Obscura Enterprises contains the following information: Sales Revenues $7,000 Expenses:
Salaries and Wages Expense $3,000 Rent Expense 1,500 Advertising Expense 800 S
upplies Expense 300 Insurance Expense 100 Total expenses 5.700 Net income $1.300 After the revenue and expense accounts have been closed, the balance in Income Summary will be a. a credit balance of $7,000. b. $0. c. a debit balance of $1,300. d. a credit balance of $1,300.
b) The balance in Income Summary after closing the revenue and expense accounts will be: $0.
The purpose of closing the revenue and expense accounts is to transfer their balances to the Income Summary account. The Income Summary account is used to calculate the net income or net loss for the period.
In this case, the sales revenues amount to $7,000, and the total expenses amount to $5,700. To calculate the net income, we subtract the total expenses from the sales revenues:
Net Income = Sales Revenues - Total Expenses
Net Income = $7,000 - $5,700
Net Income = $1,300
Once the net income is determined, it is transferred to the retained earnings account, which will increase the retained earnings balance by $1,300.
Since the income summary account is used to calculate the net income, it will have a zero balance after the closing entries are completed. The revenue and expense accounts will be closed out, and their balances will be transferred to the income summary account, resulting in a zero balance.
Therefore, the correct answer is b. $0.
learn more about Income Summary here:
https://brainly.com/question/31868088
#SPJ11
Some insurance companies require individuals to take a blood test before qualifying for lower health insurance premiums. What market failure is being addressed here? Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer. a Adverse Selection of individuals with a high risk of bad health outcomes b Moral Hazard from individuals engaging in high risk activities с Negative Externality from bad health outcomes d Monopoly power held by insurance companies
The market failure being addressed in this scenario is a. Adverse Selection of individuals with a high risk of bad health outcomes.
Adverse selection occurs when individuals with higher risks or higher probabilities of negative outcomes are more likely to seek insurance coverage compared to individuals with lower risks.
This can create an imbalance in the insurance pool, as the pool becomes dominated by individuals who are more likely to make claims, leading to higher costs for insurance companies.
In the given scenario, insurance companies require individuals to take a blood test before qualifying for lower health insurance premiums.
By implementing this requirement, insurance companies aim to address adverse selection by obtaining additional information about an individual's health status.
The blood test helps identify individuals who may have pre-existing conditions or higher health risks.
Insurance companies can then adjust their premiums accordingly based on the individual's health condition, ensuring a more balanced and fair distribution of risk among policyholders.
By addressing adverse selection, insurance companies can mitigate the potential financial losses they may face due to a disproportionately high number of claims from individuals with higher health risks.
This allows for more sustainable and affordable insurance premiums for a broader population of individuals seeking coverage.
Learn more about health risks here:
https://brainly.com/question/32287324
#SPJ11
Outstanding debt of Home Depot trades with a yield to maturity of 6%. The tax rate of Home Depot is 40%. What is the effective cost of debt of Home Depot?
Effective cost of debt can be defined as the average rate that a company pays on all of its borrowings. The effective cost of debt of Home Depot is 3.6%.
It is the average of the company's cost of debt, including any discounts or premiums, interest expenses, and fees. It helps the company to understand the actual cost of borrowing after adjusting for all costs and benefits .Outstanding debt of Home Depot trades with a yield to maturity of 6%, and the tax rate of Home Depot is 40%. The effective cost of debt formula is; Effective cost of debt = Yield to maturity * (1 - tax rate)Let's use the above formula to calculate the effective cost of debt of Home Depot. Effective cost of debt = 6% * (1 - 40%)= 6% * 0.60= 3.6%Therefore, the effective cost of debt of Home Depot is 3.6%. To calculate the effective cost of debt, we use the formula: EFFECTIVE COST OF DEBT = YTM * (1 - T) Where YTM is the yield to maturity and T is the tax rate. Now let's plug in the numbers: EFFECTIVE COST OF DEBT = 6% * (1 - 0.40) EFFECTIVE COST OF DEBT = 6% * 0.60EFFECTIVE COST OF DEBT = 3.6%.
To learn more about debt, visit:
https://brainly.com/question/31011268
#SPJ11
Explain four solutions that can be used to reduce agency
problems in a corporation.
There are several solutions that can be used to reduce agency problems in a corporation. These include aligning interests through compensation incentives, enhancing monitoring and accountability mechanisms, implementing effective corporate governance practices, and establishing clear communication and information systems.
Compensation incentives: Aligning the interests of managers and shareholders through compensation packages that link executive pay to company performance can help reduce agency problems. Performance-based bonuses, stock options, and long-term incentive plans can motivate managers to act in the best interest of shareholders.
Monitoring and accountability mechanisms: Implementing robust monitoring systems, such as regular financial reporting, internal controls, and external audits, can increase transparency and accountability. Independent boards of directors, audit committees, and external monitoring agencies can provide oversight and reduce the likelihood of opportunistic behavior.
Communication and information systems: Establishing clear channels of communication and information flow within the organization can reduce information asymmetry and enhance decision-making. Regular communication between managers and shareholders, timely disclosure of relevant information, and engaging in shareholder activism can improve trust and align interests.
By implementing these solutions, corporations can minimize agency problems by aligning incentives, enhancing monitoring and accountability, improving corporate governance, and promoting effective communication and information systems. These measures help to ensure that managers act in the best interest of shareholders, ultimately improving corporate performance and shareholder value.
To learn more about compensation incentives: - brainly.com/question/31447728
#SPJ11
Using ABC analysis, which of these should be classified as A item/s based "Annual Usage Cost"? Unit Cost (S) Item A-101 Annual Usage (pcs) Remarks 100,000 A-106 50,000 Only 1 source (in Tibet) A-112 200 A-115 10,000 Will be replaced with new part in 2 months A-119 500 A-122 1,000 A-125 60,000 A-130 1,000 1.50 200.00 100.00 2.00 8.00 19.00 3.00 10.00 Let's say you are playing the stock market and below period 2020 data was provided. For "stock A" you use a 2 month moving average. For "stock B" you use exponential smoothing with (a = 0.3). What is the Forecast in Stock B for January 2021? Stock A Stock B Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 0.11 0.20 0.03 1.20 0.50 0.03 0.10 0.11 0.56 0.78 0.44 0.10 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 14 8 6 9 12 16 14 8 6 4 4 Let's say you are playing the stock market and below period 2020 data was provided. For "stock A" you use a 2 month moving average. For "stock B" you use exponential smoothing with (a = 0.3). What is the Forecast in Stock A for January 2021? Stock B Stock A Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 0.11 0.20 0.03 1.20 0.50 0.03 0.10 0.11 0.56 0.78 0.44 0.10 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 14 8 6 9 12 16 14 8 6 4 14
The forecast formula for exponential smoothing with a smoothing factor of 0.3 is:F(1) = αA(1) + (1-α) F(0) = 0.3 (14) + 0.7 (4) = 6.20F(2) = αA(2) + (1-α) F(1) = 0.3 (8) + 0.7 (6.20) = 6.14F(3) = αA(3) + (1-α) F(2) = 0.3 (6) + 0.7 (6.14) = 6.20F(4) = αA(4) + (1-α) F(3) = 0.3 (9) + 0.7 (6.20) = 6.46F(5) = αA(5) + (1-α) F(4) = 0.3 (12) + 0.7 (6.46) = 8.14F(6) = αA(6) + (1-α) F(5) = 0.3 (16) + 0.7 (8.14) = 11.00F(7) = αA(7) + (1-α) F(6) = 0.3 (14) + 0.7 (11.00) = 12.91F(8) = αA(8) + (1-α) F(7) = 0.3 (8) + 0.7 (12.91) = 11.54F(9) = αA(9) + (1-α) F(8) = 0.3 (6) + 0.7 (11.54) = 9.68F(10) = αA(10) + (1-α) F(9) = 0.3 (4) + 0.7 (9.68) = 7.48F(11) = αA(11) + (1-α) F(10) = 0.3 (4) + 0.7 (7.48) = 5.94F(12) = αA(12) + (1-α) F(11) = 0.3 (14) + 0.7 (5.94) = 9.06Therefore, the forecast for Stock B for January 2021 is 9.06.
ABC analysis refers to a technique for dividing inventory into three categories based on the level of importance. The categories include A, B, and C. Items classified as A items are typically the most critical, while those classified as C items are typically the least critical. Based on the Annual Usage Cost, item A-101 should be classified as an A item.The Annual Usage Cost is the product of the Unit Cost (S) and the Annual Usage. As a result, we can calculate the Annual Usage Cost for each item in the inventory as follows:A-101: Annual Usage Cost = 100,000 x 1.50 = 150,000A-106: Annual Usage Cost = 50,000 x 200.00 = 10,000,000A-112: Annual Usage Cost = 200 x 100.00 = 20,000A-115: Annual Usage Cost = 10,000 x 8.00 = 80,000A-119: Annual Usage Cost = 500 x 19.00 = 9,500A-122: Annual Usage Cost = 1,000 x 3.00 = 3,000A-125: Annual Usage Cost = 60,000 x 10.00 = 600,000A-130: Annual Usage Cost = 1,000 x 2.00 = 2,000. Based on the Annual Usage Cost, item A-101 has the lowest cost, indicating that it should be classified as an A item.Moving average and exponential smoothing are two of the most often employed methods for analyzing inventory data and making predictions. The following information pertains to these techniques:Moving average: The moving average is a technique for smoothing out data points over time. This is accomplished by averaging several periods' worth of data to create a single value for each period. A two-month moving average implies that each forecast is the average of the two most recent observations.Exponential smoothing: The exponential smoothing technique gives more weight to recent data points and less weight to older data points. The smoothing factor, denoted by "α," determines the weight assigned to each observation. A smoothing factor of 0.3 means that 30% of the current period's actual value and 70% of the prior period's forecast value are used to make the current forecast.Forecast in Stock A for January 2021 is 0.4. The moving average formula for a two-month period is:Forecast for January 2021 = (November 2020 + December 2020)/2 = (0.78 + 0.44)/2 = 0.61
To know more about smoothing factor visit:
https://brainly.com/question/30903943
#SPJ11
Analyze the reasons China has a twin surplus. What are the repercussions of this fact over a long period of time. China has had surpluses in the current and Capital accounts. What are the causes, and what are the effects of this issue, inter temporally?
China's twin surplus, which refers to simultaneous surpluses in both the current account (which includes trade in goods and services) and the capital account (which includes financial flows), can be attributed to several factors.
One key reason for China's twin surplus is its export-oriented economic model. China has positioned itself as the "factory of the world," producing and exporting a vast range of goods at competitive prices. This export-led growth strategy has resulted in a significant trade surplus, as Chinese exports exceed its imports. Additionally, China's large population and low labor costs contribute to its competitive advantage in manufacturing.
The capital account surplus in China is primarily driven by foreign direct investment (FDI) and capital inflows. China has attracted substantial foreign investment due to its growing market, abundant labor supply, and improving business environment. Foreign investors are attracted to the potential for high returns and market access in China.
The long-term repercussions of China's twin surplus can have both positive and negative effects. On the positive side, the surpluses have allowed China to accumulate substantial foreign exchange reserves, which provide a cushion against external shocks and give the country greater financial stability. The surplus also enables China to invest abroad, diversifying its assets and expanding its global influence.
However, the persistent twin surplus has raised concerns and led to imbalances in the global economy. It has contributed to trade tensions with other countries, particularly the United States, who view China's trade surplus as unfair and harmful to their own domestic industries. The surplus has also resulted in a buildup of foreign assets, particularly U.S. Treasury bonds, which can create risks and vulnerabilities in the event of currency or financial market fluctuations.
Over time, China's twin surplus has prompted calls for rebalancing its economy towards greater domestic consumption and reducing reliance on exports. Efforts to shift towards a more consumption-driven economy can help address global imbalances and promote more sustainable and inclusive growth.
Learn more about Foreign direct investment (FDI)
https://brainly.com/question/32258327
#SPJ11
A Question Completion Status: 10 90 20 30 40 28 290 300 310 320 100 110 125 50 61 75 33 13 14 15 16 17 340 350 36 37 38 39 40 41 42 43 Moving to another question will save this response. Question 36 When calculating GDP using the expenditure approach, the investment component includes net investment plus depreciation. gross investment plus depreciation. net investment only. net investment minus depreciation. fixed investment minus depreciation. Moving to another question will save this response. 27 S 44 46 47 Ques 2 poin Question of so
The correct answer is "net investment plus depreciation." The explanation for this choice will be provided in the next paragraph.
When calculating GDP using the expenditure approach, the investment component includes both net investment and depreciation. Net investment refers to the change in the value of a country's capital stock, which is calculated by subtracting the depreciation (wear and tear) from the gross investment.
Gross investment represents the total investment made in an economy, including expenditures on new capital goods and changes in inventories. However, since capital goods depreciate over time, it is essential to account for the depreciation in order to measure the net increase in the capital stock accurately.
Therefore, the investment component in GDP calculation includes net investment (gross investment minus depreciation) to reflect the change in the country's capital stock while considering the effects of depreciation.
Learn more about depreciation : brainly.com/question/30531944
#SPJ11
If the equilibrium price for tickets to a a Bruno Mars concert is $150 each and he sells them for $100, a. Does he create a market surplus or shortage? Shortage Surplus Neither a shortage nor surplus b. Suppose scalpers buy 10,000 tickets and resell them for $150 each. How much profit do the scalpers earn?
Bruno Mars is selling his tickets at a price of $100 while the equilibrium price for tickets to a Bruno Mars concert is $150 each. This means that Bruno Mars is selling the tickets at a lower price than the equilibrium price.
So, there would be a shortage of tickets because people would demand more tickets at $100 than the supply. As a result, the demand for tickets would increase but the supply would not be enough to fulfill that demand. b. Suppose scalpers buy 10,000 tickets and resell them for $150 each. How much profit do the scalpers earn? If scalpers buy 10,000 tickets and resell them at $150 each, their total revenue would be $150 x 10,000 = $1,500,000. If scalpers initially bought each ticket for $100, then their total cost would be $100 x 10,000 = $1,000,000. Therefore, the profit scalpers earn would be the difference between the total revenue and the total cost. Hence, the profit scalpers would earn would be $1,500,000 - $1,000,000 = $500,000.
To learn more about equilibrium price, visit:
https://brainly.com/question/28527601
#SPJ11
7. The mini-plan is a short form of a business plan focusing heavily on market issues such as the following except a. pricing b. supporting documentation c. competition d. distribution channels
The mini-plan is a streamlined version of a business plan that places a strong emphasis on factors relating to the market.
The standard business plan has been condensed into a mini-plan. Despite covering all necessary topics, it is condensed to highlight important market-related features.
Since they are essential to comprehending the competitive environment of the organisation and its chances of success, market challenges take centre stage in the mini-plan. Pricing is a crucial factor to take into account because it has a direct impact on the positioning of the good or service in the market and its profitability. The price strategy and its justification might be described in the mini-plan.
Competition is yet another important element. Businesses may distinguish themselves from their rivals and create powerful marketing and sales strategies by identifying and evaluating their rivals.
Learn more about business plan here:
https://brainly.com/question/13160849
#SPJ11
Identify any bond on the local or Caribbean or world
market. Describe the features of this bond (interest Rate, year of
issue, face value, issuer and maturity date, subscription rate
etc).
One example of a bond on the global market is the Apple Inc. bond issued in 2021, with a fixed interest rate, a face value of $1 billion, and a maturity date in 2061.
Apple Inc., a multinational technology company, issued this bond in 2021. It has a fixed interest rate, which determines the periodic interest payments to bondholders. The face value of the bond is $1 billion, indicating the principal amount that will be repaid to the bondholders at maturity. The bond's issuer is Apple Inc., a well-known company in the technology industry.
The maturity date of this bond is in 2061, indicating the date when the principal will be fully repaid. Subscription rates, which represent the level of investor demand during the bond offering, may vary depending on market conditions and investor appetite. This particular bond example showcases key features of a bond, including the interest rate, year of issue, face value, issuer, and maturity date, which are essential factors for investors to consider when analyzing and investing in bonds.
Learn more about demand here:
https://brainly.com/question/30402955
#SPJ11
Today the one year forward rate for the Swiss franc is SF11505/$. The spot rate is SF11626/$. The interest rate on a risk-free asset in Switzerland is 271 percent if interest rate parity exists, what is the one-year risk-free rate in the US? Multiple Choice A. 164% B. 3,03% C. 355% D. 3.79% E. 332%
The one-year risk-free rate in the US can be determined using the interest rate parity principle.
Given the one-year forward rate for the Swiss franc (SF) and the spot rate, we can calculate the expected appreciation or depreciation of the Swiss franc against the US dollar. The difference in these exchange rates can be used to estimate the interest rate differential between the two countries.
In this case, the one-year forward rate for the Swiss franc is SF11505/$, and the spot rate is SF11626/$. The difference between the forward rate and the spot rate is SF11626 - SF11505 = SF121, indicating an expected depreciation of the Swiss franc.
Now, to calculate the one-year risk-free rate in the US, we can use the interest rate parity equation:
(1 + Foreign Interest Rate) = (1 + Domestic Interest Rate) * (Forward Rate / Spot Rate)
Plugging in the given values, we have:
(1 + 2.71%) = (1 + Domestic Interest Rate) * (SF11505 / SF11626)
Solving for the Domestic Interest Rate:
Domestic Interest Rate = [(1 + 2.71%) * (SF11626 / SF11505)] - 1
Using the provided exchange rates, the one-year risk-free rate in the US is approximately 3.03%.
Therefore, the correct answer is B. 3.03%.
To learn more about depreciation click here:
brainly.com/question/30531944
#SPJ11