Answer:
The ratio of gravitational force to electrical force is 3.19 x 10^-36
Explanation:
mass of an alpha particle = 6.64 x [tex]10^{-27}[/tex] kg
charge on an alpha particle = +2e = +2(1.6 x [tex]10^{-19}[/tex] C) = 3.2 x [tex]10^{-19}[/tex] C
distance between particles = d
For gravitational attraction:
The force of gravitational attraction F = [tex]\frac{Gm^{2} }{r^{2} }[/tex]
where G = gravitational constant = 6.67 x [tex]10^{-11}[/tex] m^3 kg^-1 s^-2
r = the distance between the particles = d
m = the mass of each particle
therefore, gravitational force = [tex]\frac{6.67*10^{-11}*(6.64*10^{-27} )^{2} }{d^{2} }[/tex] = [tex]\frac{2.94*10^{-63} }{d^{2} }[/tex] Newton
For electrical repulsion:
Electrical force between the particles = [tex]\frac{-kQ^{2} }{r^{2} }[/tex]
where k is the Coulomb's constant = 9.0 x [tex]10^{9}[/tex] N•m^2/C^2
r = distance between the particles = d
Q = charge on each particle
therefore, electrical force = [tex]\frac{-9*10^{9}*(3.2*10^{-19} )^{2} }{d^{2} }[/tex] = [tex]\frac{-9.216*10^{-28} }{d^{2} }[/tex] Newton
the negative sign implies that there is a repulsion on the particles due to their like charges.
Ratio of the magnitude of gravitation to electrical force = [tex]\frac{2.94*10^{-63} }{9.216*10^{-28} }[/tex]
==> 3.19 x 10^-36
A projectile is fired at time t = 0.0 s from point o at the edge of a cliff, with initial velocity components of Vox = 30 m/s and Voy = 100 m/s. The projectile rises, and then falls into the sea
at point P. The time of flight of the projectile is 25 s. Assume air resistance is negligible.
t
What is the height of the cliff?
560 m
450 m
780 m
400 m
640 m
Answer:
It would be 450 or 640. My final answer would be about 450
Explanation: Because it would't be to high if it was shot Voy = 100
btw i think i know what i know what i am talking about.
The answer would be about 450 m.
What peak is considered a cliff?The top isn't the standard for a cliff to be reckoned as a cliff as such. Any steep rock face particularly at the edge of the sea can be specified as a cliff.
A 'clifftop' just refers to any pinnacle of a cliff. A 'plateau' is any flat extended geologic floor. An 'overhang' is a part of a structure or formation that protrudes from the primary frame and rests such that it is 'overhanging' the ground (striking above it).
Learn more about the height of the cliff here https://brainly.com/question/14524817
#SPJ2
A proton moving in the positive x direction with a speed of 9.9 105 m/s experiences zero magnetic force. When it moves in the positive y direction it experiences a force of 1.6 10-13 N that points in the positive z direction. Determine the magnitude and direction of the magnetic field.
Answer:
The magnitude of the magnetic field is 1.01T and its direction is in the negative x direction
Explanation:
In order to calculate the magnitude and direction of the magnetic field, you take into account the following equation for the magnetic force on the proton:
[tex]\vec{F_B}=q\vec{v}\ X\ \vec{B}[/tex] (1)
v: speed of the proton = 9.9*10^5 m/s
q: charge of the proton = 1.6*10^-19C
B: magnetic field = ?
FB: magnetic force on the proton = 1.6*10^-13N
When the proton travels in the positive y direction (^j), you have that the proton experiences a force in the positive z direction (+^k). To obtain this direction of the magnetic force on the proton, it is necessary that the magnetic field points in the negative x direction, in fact, you have:
^j X (-^i) = -(-^k)=^k
To obtain the magnitude of the magnetic field you use:
[tex]F_B=qvBsin90\°=qvB\\\\B=\frac{F_B}{qv}=\frac{1.6*10^{-13}N}{(1.6*10^{-19}C)(9.9*10^5m/s)}\\\\B=1.01T[/tex]
The magnitude of the magnetic field is 1.01T and its direction is in the negative x direction
Refer the attached photo
Answer:
A
Explanation:
since the wooden bat is an opaque object placed after a translucent object, light will come through the plastic sheet but will be unable to go through the bat. hence the dark shadow of the bat on a lit sheet
I attach a 4.1 kg block to a spring that obeys Hooke's law and supply 3.8 J of energy to stretch the spring. I release the block and it oscillates with a period of 0.13 s. What is the amplitude of oscillation
Answer:
The amplitude of the oscillation is 2.82 cm
Explanation:
Given;
mass of attached block, m = 4.1 kg
energy of the stretched spring, E = 3.8 J
period of oscillation, T = 0.13 s
First, determine the spring constant, k;
[tex]T = 2\pi \sqrt{\frac{m}{k} }[/tex]
where;
T is the period oscillation
m is mass of the spring
k is the spring constant
[tex]T = 2\pi \sqrt{\frac{m}{k} } \\\\k = \frac{m*4\pi ^2}{T^2} \\\\k = \frac{4.1*4*(3.142^2)}{(0.13^2)} \\\\k = 9580.088 \ N/m\\\\[/tex]
Now, determine the amplitude of oscillation, A;
[tex]E = \frac{1}{2} kA^2[/tex]
where;
E is the energy of the spring
k is the spring constant
A is the amplitude of the oscillation
[tex]E = \frac{1}{2} kA^2\\\\2E = kA^2\\\\A^2 = \frac{2E}{k} \\\\A = \sqrt{\frac{2E}{k} } \\\\A = \sqrt{\frac{2*3.8}{9580.088} }\\\\A = 0.0282 \ m\\\\A = 2.82 \ cm[/tex]
Therefore, the amplitude of the oscillation is 2.82 cm
A 90.0-kg ice hockey player hits a 0.150-kg puck, giving the puck a velocity of 45.0 m/s. If both are initially at rest and if the ice is frictionless, how far does the player recoil in the time it takes the puck to reach the goal 15.0 m away
Answer:
0.0241 m
Explanation:
mass of the hockey player m1 = 90 kg
mass of puck m2 = 0.150 kg
puck velocity v1= 45 m/s
distance traveled by puck to reach the goal =15.0 m.
now accoding to momentum conservation law
90×45+0.15×v2 = 0 [ since, If both are initially at rest and if the ice is frictionless,]
therefore, v2= -0.0725 m/s.
Now time taken by the puck to reach the goal
t= 15/45 = 1/3 sec.
therefore, how far does the player recoil in the time
=0.0725×1/3= 0.0241 m.
the distance travelled by the player( recoil ) in the time the puck reach the goal is 0.025m.
Given the data in the question
Mass of the player; [tex]m_1 = 90.0kg[/tex]Mass of puck; [tex]m = 0.150kg[/tex]Since they were both at rest initially
Initial velocity of player; [tex]u_1 = 0[/tex]Initial velocity of puck; [tex]u = 0[/tex]Velocity of player after the hit; [tex]v_1 = \ ?[/tex]Velocity of puck after the hit; [tex]v = 45.0m/s[/tex]Distance to the goal; [tex]s = 15.0m[/tex]Using conservation of liner momentum:
[tex]mu + m_1u_1 = mv+ m_1v_1[/tex]
Now, Since they were both at rest initially
[tex]0 = mv+ m_1v_1[/tex]
We substitute in our values to find the velocity of the player after the hit ( recoil velocity )
[tex]0 =[ 0.150kg * 45.0m/s ] + [ 90.0kg * v_1 ]\\\\0 = 6.75kg.m/s + [ 90.0kg * v_1 ]\\\\90.0kg * v_1 = -6.75kg.m/s \\\\v_1 = -\frac{6.75kg.m/s}{90.0kg} \\\\v_1 =- 0.075m/s[/tex]
{ The negative sign shows that the velocity of both the player and the puck are in opposite direction }
Hence, recoil velocity of the player is 0.075m/s
Now, we determine the time taken for the puck to trach the goal using the relation between distance, velocity and time .
Time = Distance / Velocity
We substitute our values into the expression
[tex]t = \frac{s}{v} \\\\t = \frac{15.0m}{45m/s} \\\\t = 0.3333s[/tex]
Hence, the time taken for the puck to reach the goal is 0.3333 seconds.
Next, we determine the distance travelled by the player( recoil ) in the time the puck reach the goal using the relation between distance, velocity and time .
Time = Distance / Velocity
We substitute in our values
[tex]t = \frac{s}{v}\\\\0.3333s = \frac{s}{0.075m/s} \\\\s = 0.3333s * 0.075m/s\\\\s = 0.025m[/tex]
Therefore, the distance travelled by the player( recoil ) in the time the puck reach the goal is 0.025m.
Learn more: https://brainly.com/question/3637213
A vector quantity has direction, a scalar quantity does not.
Explanation:
hope you like then comment plz
Find the ratio of the gravitational force between two planets if the masses of both planets are quadrupled but the distance between them stays the same.
Answer:
The ratio of the new force over the original force is 16
Explanation:
Recall the formula for the gravitational force between two masses M1 and M2 separated a distance D:
[tex]F_G=G\,\frac{M_1\,\,M_2}{D^2}[/tex]
So now, if the masses M1 and M2 are quadrupled and the distance stays the same, the new force becomes:
[tex]F'_G=G\,\frac{4M_1\,\,4M_2}{D^2}=G\,\frac{16\,\,M_1\,\,M_2}{D^2}=16\,\,G\,\frac{M_1\,\,M_2}{D^2}= 16\,\,F_G[/tex]
which is 16 times the original force.
So the ratio of the new force over the original force is 16
The ratio of the gravitational force between two planets if the masses of both planets are quadrupled but the distance between them stays the same is 16:1.
What does Newton's law of gravitation state?Newton's law of gravitation states that any particle of matter in the universe attracts any other with a force varying directly as the product of the masses and inversely as the square of the distance between them.
The formula for Newton's law of gravitation is:
[tex]F = G \frac{m_1m_2}{r^{2} }[/tex]
where,
F is the gravitational force.G is the gravitational constant.m₁ and m₂ are the masses of both objects.r is the distance between the objects.The initial force between the planets is:
[tex]F_1 = G \frac{m_1m_2}{r^{2} }[/tex]
The force between the planets if the masses of both planets are quadrupled but the distance between them stays the same is:
[tex]F_2 = G \frac{4m_14m_2}{r^{2} } = 16 G \frac{m_1m_2}{r^{2} }[/tex]
The ratio of F₂ to F₁ is:
[tex]\frac{F_2}{F_1} =\frac{16 G \frac{m_1m_2}{r^{2} }}{G \frac{m_1m_2}{r^{2} }} = \frac{16}{1}[/tex]
The ratio of the gravitational force between two planets if the masses of both planets are quadrupled but the distance between them stays the same is 16:1.
Learn more about Newton's gravitational law here: https://brainly.com/question/9373839
Angular velocity in the z direction of a flywheel is w(t)=A + Bt2 The numerical values of the constants are A=2.75 and B=1.50. What is the angular acceleration α(t) when t=0s and t=5.00s?
Answer:
α(0) = 0 rad/s²
α(5) = 15 rad/s²
Explanation:
The angular velocity of the flywheel is given as follows:
w(t) = A + B t²
where, A and B are constants.
Now, for the angular acceleration, we must take derivative of angular velocity with respect to time:
Angular Acceleration = α (t) = dw/dt
α(t) = (d/dt)(A + B t²)
α(t) = 2 B t
where,
B = 1.5
AT t = 0 s
α(0) = 2(1.5)(0)
α(0) = 0 rad/s²
AT t = 5 s
α(5) = 2(1.5)(5)
α(5) = 15 rad/s²
(5 pt) You tie a cord to a pail of water, and your swing the pail in a vertical circular 0.700 m. What is the minimum speed must you give the pail at the highest point of the circle if no water is to spill from it
Answer:
The minimum speed required is 2.62m/s
Explanation:
The value of gravitational acceleration = g = 9.81 m/s^2
Radius of the vertical circle = R = 0.7 m
Given the mass of the pail of water = m
The speed at the highest point of the circle = V
The centripetal force will be needed must be more than the weight of the pail of water in order to not spill water.
Below is the calculation:
[tex]\frac{mV^{2}}{R} = mg[/tex]
[tex]V = \sqrt{gR}[/tex]
[tex]V = \sqrt{9.81 \times 0.7}[/tex]
[tex]V = 2.62 m/s[/tex]
Molecules in the combustion chamber of a rocket engine are in a high state of random motion. When the molecules are expelled through a nozzle in a more ordered state, will their temperature be higher than, lower than, or the same as their initial temperature in the chamber before being exhausted?
Answer:
The temperature of molecules exhausted through the nozzle
is lower than the temperature in the chamber before being exhausted.
Explanation:
Final naïve case: If the highest-pitch string on the piano is made of spring steel (density = 7800 kg/m3) with a diameter of 1/32" (= 0.794 mm), what will the linear density of such a string be (in kg/m)?
Answer:
The linear density is [tex]K = 3.863 *10^{-3 } \ kg/m[/tex]
Explanation:
From the question we are told that
The density of steel is [tex]\rho = 7800 \ kg/m^3[/tex]
The diameter of the string is [tex]d = 0.794 \ mm = 7.94 *10^{-4} \ m[/tex]
The radius of the string is evaluated as [tex]r = \frac{D}{2} = \frac{7.94 *10^{-4}}{2} = 3.97*10^{-4} \ m[/tex]
The volume of the string is mathematically evaluated as
[tex]V = \pi * r ^2 * L[/tex]
Now assuming that the length of the string is L = 2 m
So
[tex]V = 3.142 * (3.97 *10^{-4})^2 * (2)[/tex]
[tex]V = 9.9041 *10^{-7} \ m^3[/tex]
Then the mass of the string would be
[tex]m = \rho * V[/tex]
substituting value
[tex]m = 7800*9.904 14 *10^{-7}[/tex]
[tex]m = 7.73*10^{-3} \ kg[/tex]
Looking at the question we see that the unit of the linear density is [tex]\frac{kg}{m}[/tex]
Hence the linear density is evaluated as
[tex]K = \frac{m}{L}[/tex]
substituting value
[tex]K = \frac{7.73 *10^{-3}}{2}[/tex]
[tex]K = 3.863 *10^{-3 } \ kg/m[/tex]
ir temperature in a desert can reach 58.0°C (about 136°F). What is the speed of sound (in m/s) in air at that temperature?
Answer:
363m.s-1
Explanation:
In a high school swim competition, a student takes 1.6 s to complete 1.5 somersaults. Determine the average angular speed of the diver, in rad/s, during this time interval.
Answer:
The angular speed is [tex]w = 5.89 \ rad/s[/tex]
Explanation:
From the question we are told that
The time taken is [tex]t = 1.6 s[/tex]
The number of somersaults is n = 1.5
The total angular displacement during the somersault is mathematically represented as
[tex]\theta = n * 2 * \pi[/tex]
substituting values
[tex]\theta = 1.5 * 2 * 3.142[/tex]
[tex]\theta = 9.426 \ rad[/tex]
The angular speed is mathematically represented as
[tex]w = \frac{\theta }{t}[/tex]
substituting values
[tex]w = \frac{9.426}{1.6}[/tex]
[tex]w = 5.89 \ rad/s[/tex]
A rod has length 0.900 mm and mass 0.500 kgkg and is pivoted at one end. The rod is not uniform; the center of mass of the rod is not at its center but is 0.500 mm from the pivot. The period of the rod's motion as a pendulum is 1.49 ss. What is the moment of inertia of the rod around the pivot
Answer:
The moment of inertia is [tex]I =0.14 \ kg \cdot m^2[/tex]
Explanation:
From the question we are told that
The length of the rod is [tex]l = 0.900 \ m[/tex]
The mass of the rod is [tex]m = 0.500 \ kg[/tex]
The distance of the center of mass from the pivot is [tex]d = 0.500 \ m[/tex]
The period of the rod's motion is [tex]T = 1.49 \ s[/tex]
Generally the period of the motion is mathematically represented as
[tex]T = 2 \pi * \sqrt{\frac{I}{m* g * d} }[/tex]
Where [tex]I[/tex] is the moment of inertia about the pivot so making [tex]I[/tex] the subject of formula
[tex]I = [\frac{T}{2\pi } ]^2 * m * g * d[/tex]
substituting values
[tex]I = [\frac{1.49}{2* 3.142 } ]^2 * 0.5 * 9.8 * 0.5[/tex]
[tex]I =0.14 \ kg \cdot m^2[/tex]
Identify the term used to describe the ability of a liquid to flow against gravity up a narrow tube.
Answer:
This would be capillary action.
Explanation:
The physics behind it is gravity adhesion. The forces that attract between dissimilar molecules or atoms, in our case the contact area between the particles of the liquid and the particles forming the tube.
How many excess electrons must be distributed uniformly within the volume of an isolated plastic sphere 20.0 cm in diameter to produce an electric field of 1450 N/C just outside the surface of the sphere
Answer:
1.007 × 10^(10) electron
Explanation:
We are given;
Electric Field;E = 1450 N/C
Diameter;d = 20 cm = 0.2 m
So, Radius: r = 0.2/2 = 0.1 m
Formula for Electric field just outside the sphere is given by the formula;
E = kq/r²
Where;
E is the magnitude of the electric field. q is the magnitude of the point charge r is distance from the point charge
k is a constant with a value of 9 x 10^(9) N.m²/C²
Making q the subject, we have;
q = Er²/k
Thus,
q = 1450 × 0.1²/(9 × 10^(9))
q = 1.61 × 10^(-9) C
Now, total charge q is also given by the formula;
q = Ne
Where;
e is charge on electron which is 1.6 × 10^(-19)
N is number of excess electrons
Making N the formula, we have;
N = q/e
N = (1.61 × 10^(-9))/(1.6 × 10^(-19))
N = 1.007 × 10^(10) electron
A particle located at the position vector m has a force N acting on it. The torque about the origin is
Complete question:
A particle located at the position vector r = (i + j) m has a force F = (2i + 3j) N acting on it. The torque about the origin is
Answer:
The torque about the origin is (5k) N.m
Explanation:
The torque about the origin is the vector or cross product of the two vectors.
τ = r x F (N.m)
Where;
τ is the torque about the origin
τ = r x F
τ = (i + j) x (2i + 3j)
For cross product;
i x j = k
i x k = j
j x k = i
i x i = 0
j x j = 0
k x k = 0
τ = (i + j) x (2i + 3j)
τ = (i x 2i) + (i x 3j) + (j x 2i) + (j x 3j)
τ = (0) + (3k)+ (2k) + 0
τ = (5k) N.m
Therefore, the torque about the origin is (5k) N.m
Which of the following is not considered a behavior?
A. eating
B. anxiety
C. sleeping
D. crying
━━━━━━━☆☆━━━━━━━
▹ Answer
B. Anxiety
▹ Step-by-Step Explanation
Anxiety isn't a behavior since it's a feeling. Behavior and feeling are different things therefore, anxiety is the correct answer.
Hope this helps!
- CloutAnswers ❁
Brainliest is greatly appreciated!
━━━━━━━☆☆━━━━━━━
Eating, sleeping, and crying all are considered as behaviors. However, anxiety cannot be considered as a behavior because it is a feeling. Thus, the correct option is B.
What is Anxiety?Anxiety is an intense feeling of excessive, and persistent worry and the fear about everyday situations. This includes fast heart rate, rapid breathing, sweating, and feeling tired constantly may occur.
Behavior is the range of actions and mannerisms which are made by individuals, organisms, systems or the artificial entities in some environment. These systems can include other systems or organisms as well as the inanimate physical environment. Behaviors include eating, sleeping, and crying. Anxiety is not a behavior, it is a feeling.
Therefore, the correct option is B.
Learn more about Anxiety here:
https://brainly.com/question/28481974
#SPJ5
A standard 1 kilogram weight is a cylinder 48.5 mm in height and 49.0 mm in diameter. What is the density of the material? kg/m3
Answer:
Density = 10,933.93 kg/m^3
the density of the material is 10,933.93 kg/m^3
Explanation:
Density is the mass per unit volume
Density = mass/volume = m/V
Volume of a cylinder V = πr^2 h
Given;
Height h = 48.5mm = 0.0485 m
Radius r = diameter/2 = 49mm÷2 = 24.5mm = 0.0245m
Substituting the values;
Volume V = π×(0.0245^2)×0.0485
V = 0.000091458438030 m^3
V = 0.000091458 m^3
The mass is given as;
Mass = 1 kg
So, the density can be calculated as;
Density = 1/0.000091458
Density = 10933.92825785 kg/m^3
Density = 10,933.93 kg/m^3
the density of the material is 10,933.93 kg/m^3
Two cylindrical resistors are made from the same material. The shorter one has length L, diameter D, and resistance R1. The longer one has length 8L, diameter 4D, and resistance R2. How do the resistances of these two resistors compare
Answer:
the resistance of the longer one is twice as big as the resistance of the shorter one.
Explanation:
Given that :
For the shorter cylindrical resistor
Length = L
Diameter = D
Resistance = R1
For the longer cylindrical resistor
Length = 8L
Diameter = 4D
Resistance = R2
So;
We all know that the resistance of a given material can be determined by using the formula :
[tex]R = \dfrac{\rho L }{A}[/tex]
where;
A = πr²
[tex]R = \dfrac{\rho L }{\pi r ^2}[/tex]
For the shorter cylindrical resistor ; we have:
[tex]R = \dfrac{\rho L }{\pi r ^2}[/tex]
since 2 r = D
[tex]R = \dfrac{\rho L }{\pi (\frac{2}{2 \ r}) ^2}[/tex]
[tex]R = \dfrac{ 4 \rho L }{\pi \ D ^2}[/tex]
For the longer cylindrical resistor ; we have:
[tex]R = \dfrac{\rho L }{\pi r ^2}[/tex]
since 2 r = D
[tex]R = \dfrac{ \rho (8 ) L }{\pi (\frac{2}{2 \ r}) ^2}[/tex]
[tex]R = \dfrac{32\rho L }{\pi \ (4 D) ^2}[/tex]
[tex]R = \dfrac{2\rho L }{\pi \ (D) ^2}[/tex]
Sp;we can equate the shorter cylindrical resistor to the longer cylindrical resistor as shown below :
[tex]\dfrac{R_s}{R_L} = \dfrac{ \dfrac{ 4 \rho L }{\pi \ D ^2}}{ \dfrac{2\rho L }{\pi \ (D) ^2}}[/tex]
[tex]\dfrac{R_s}{R_L} ={ \dfrac{ 4 \rho L }{\pi \ D ^2}}* { \dfrac {\pi \ (D) ^2} {2\rho L}}[/tex]
[tex]\dfrac{R_s}{R_L} =2[/tex]
[tex]{R_s}=2{R_L}[/tex]
Thus; the resistance of the longer one is twice as big as the resistance of the shorter one.
Find the displacement. Will give brainliest!
Answer:
1000 m upwards
Explanation:
Displacement Formula: Average Velocity = Displacement/Total Time
Simply plug in our known variables and solve:
100 m/s = x m/10 seconds
100 m/s(10 s) = x m
m = 1000
Four identical charges particles of charge 1Uc, 2Uc,
3Uc and 4Uc
are placed at x = lm, x=2m,
x=3m and
x=5m. The electric field intensity
at origin is?
Answer:
17.94 kN/C is the electric field intensity at the origin due to the charges.
Explanation:
From the question, we are told that
The distance of 1 μC from origin = 1 m
The distance of 2 μC from origin = 2 m
The distance of 3 μC from origin = 3 m
The distance of 4 μC from origin = 5 m
Therefore, for us to find the electric field intensity, we'll solve below:
The formula for Electric field intensity = ( k * q ) / ( r * r )
where , r is distance ,
k = 9 * 10^9 ,
and , q is charge .
now ,
electric field intensity at the origin = [ k * 10^(-6) / 1 * 1 ] +[ k * 2 * 10^(-6) / 2 * 2 ] + [ k * 3 * 10^(-6) / 3 * 3 ] + [ k * 4 * 10^(-6) / 5 * 5 ]
=> electric field intensity at the origin = k * 10^(-6) [ 1 + 1/2 + 1/3 + 4/25 ] N/C
=> electric field intensity at the origin = 9 * 10^9 * 10^(-6) * 1.99 N/C
=> electric field intensity at the origin = 17.94 kN/C
In the photoelectric effect, if the intensity of light shone on a metal increases, what will happen?
Answer:
C) There will be more electrons ejected
Explanation:
The number of electrons ejected whenever a photoelectric effect is identified it is proportional to the intensity of the incident light
Nevertheless, the photoelectrons' maximal kinetic energy is independent of their light intensity
Therefore, the maximum speed of the electron ejected doesn't really depend on the light intensity
So, if the intensity rises, only the number of electrons ejected will rised
Therefore the option c is correct
Answer:
C) There will be more electrons ejected
Explanation:
In the photoelectric effect, photons with an energy of E are shone upon a piece of metal, and if the energy of the photons overcome the work function ϕ of the metal, then electrons with will be ejected from the metal with a kinetic energy KE.
E_photon = Φ + KE
Each photon is capable of ejecting one electron from the metal. Therefore, increasing the intensity of the light (the number of photons shone on the metal) will increase the number of electrons ejected from the metal.
At what speed would a 3.00 x 10^4 kg airplane have to fly and with a momentum of 1.60 x 10^9 kg.m/s
Answer:
5.3×10⁴ m/s
Explanation:
From the question,
Momentum = mass× velocity
M = mV................ Equation 1
Where M = momentum of the airplane, m = mass of the airplane, V = Velocity of the airplane
make V the subject of the equation
V = M/m.................. Equation 2
Given: M = 1.6×10⁹ Kg.m/s, m = 3.0×10⁴ kg
Substitute these values into equation 2
V = 1.6×10⁹/3.0×10⁴
V = 5.3×10⁴ m/s
A small cylinder made of a diamagnetic material is brought near a bar magnet. One end of the cylinder is brought near the North pole of the magnet and is repelled. What happens when the other end of the cylinder is brought near the North pole of the magnet? Group of answer choices
Answer:
it attracts
Explanation:
since in a magnetic body there are two poles
(north and south poles)if the first pole was repeled when brought near the North Pole therefore the other end is going to attarct because the first end was also a North Pole while the second end will be a south pole
A woman is standing at the rim of a nonuniform cylindrical horizontal platform initially at rest. The platform is free to rotate about frictionless orthogonal axle that goes through its center and has 4 m in diameter and moment of inertia of 500 kgm2. The woman then starts walking along the rim in clockwise direction at a constant speed of 1.50 m/s relative to the Earth. If a woman has 60 kg, how much work does she do to set herself and the platform into motion?
Answer:
e
Explanation:
i took it myself and got it right
Which phrases accurately describe an elliptical galaxy? Check all that apply.
may be egg-shaped
may be spiral-shaped
has no recognizable shape
has no new stars being formed
has almost no gas or dust between stars
Answer:
May be egg shaped
Has no new stars being formed.
Has almost no gas or dust between stars.
Explanation:
Elliptical galaxy is the collection of many stars which are bounded together gravitationally, which is smooth and ellipsoidal and shape and the appearance is featureless.
Elliptical galaxy is ovoid or spherical masses of stars.
It is found in galaxy clusters and compact galaxies.
It has no gas or dust between stars which result in low rates of star formation.
It is formed When two spirals collide, they lose their familiar shape, morphing into the less-structured elliptical galaxies.
Elliptical galaxy is made of old stars and have no gas and dust.
An example is elliptical galaxy m60 which shines brightly and is egg shaped.
What is the purpose of guarding electrical equipment with exposed parts operating at 50 volts or more?
Answer:
Electrical equipment should be guarded with exposed parts operating at 50 volts or more to avoid the accidental shock and also to prevent accidental contact by workers and their tools.
Explanation:
Electrical guarding involves the process by which electrical equipment are enclosed so that people do not accidentally come in contact with it in order to avoid accidental shock.
Electrical components operating at 50 volts or more must be guarded with covers or other permanent barriers and it should be put where the people that are authorized to it have acess to it.
A small ferryboat is 4.70 m wide and 6.10 m long. When a loaded truck pulls onto it, the boat sinks an additional 5.00 cm into the river. What is the weight of the truck
Answer:
M = 1433.5 kg
Explanation:
This exercise is solved using the Archimedean principle, which states that the hydrostatic thrust is equal to the weight of the desalinated liquid,
B = ρ g V
with the weight of the truck it is in equilibrium with the push, we use Newton's equilibrium condition
Σ F = 0
B-W = 0
B = W
body weight
W = M g
the volume is
V = l to h
rho_liquid g (l to h) = M g
M = rho_liquid l a h
we calculate
M = 1000 4.7 6.10 0.05
M = 1433.5 kg
Suppose the ring rotates once every 4.30 s . If a rider's mass is 53.0 kg , with how much force does the ring push on her at the top of the ride?
The complete question is;
In an amusement park ride called The Roundup, passengers stand inside a 16-m-diameter rotating ring. After the ring has acquired sufficient speed, it tilts into a vertical plane.
Suppose the ring rotates once every 4.30 s . If a rider's mass is 53.0 kg , with how much force does the ring push on her at the top of the ride?
Answer:
F_top = 385.36 N
Explanation:
We are given;
mass;m = 52 kg
Time;t = 4.3 s
Diameter;d = 16m
So,Radius;r = 16/2 = 8m
The formula for the centrifugal force is given as;
F_c = mω²R
Where;
R = radius
Angular velocity;ω = 2πf
f = frequency = 1/t = 1/4.3 Hz
F_c = 53 × (2π × 1/4.3)² × 8 = 905.29 N.
The force at top would be;
F_top = F_c - mg
F_top = 905.29 - (9.81 × 53) N
F_top = 385.36 N
The force at the top of ride will be "385.36 N".
Force and mass:According to the question,
Rider's mass, m = 52 kg
Time, t = 4.3 s
Diameter, d = 16 m
Radius, r = [tex]\frac{16}{2}[/tex] = 8 m
Frequency, f = [tex]\frac{1}{t}[/tex] = [tex]\frac{1}{4.3}[/tex] Hz
We know the formula,
Centrifugal force, [tex]F_c[/tex] = mω²R
or,
Angular velocity, ω = 2πf
By substituting the values in the above formula,
[tex]F_c = 53(2\pi \times (\frac{1}{4.3})^2\times 8 )[/tex]
[tex]= 905.29[/tex] N
hence,
The top force will be:
→ [tex]F_{top} = F_c[/tex] - mg
By substituting the values,
[tex]= 905.29-(9.81\times 53)[/tex]
[tex]= 385.36[/tex] N
Thus the above response is correct.
Find out more information about force here:
https://brainly.com/question/12970081