Answer:
chemical change
Explanation:
electrolysis process by which electric current is passed through a substance to effect a chemical change.
On the periodic table, what is a group? For the main groups, what characteristic
do the elements have in common?
Answer:
The s-, p-, and d-block elements of the periodic table are arranged into 18 numbered columns, or groups. The elements in each group have the same number of valence electrons. As a result, elements in the same group often display similar properties and reactivity.
Explanation:
On the periodic table, a group refers to a vertical column of elements that share similar chemical properties.
For the main groups, the characteristic do the elements have in common is valence electron configuration and chemical reactivity.
On the periodic table, a group refers to a vertical column of elements that share similar chemical properties. These elements are arranged in such a way that they have the same number of valence electrons, which are the electrons in the outermost energy level (shell) of their atoms. The number of valence electrons is a critical factor in determining the chemical behavior and reactivity of elements, as it governs their ability to form chemical bonds with other elements.
Main group elements, also known as representative elements, are located in the s-block and p-block of the periodic table. These elements are found in Groups 1, 2, and 13 to 18. Each main group is labeled with a number from 1 to 18.
Here are the main characteristics that elements in the same main group (vertical column) have in common:
1. Valence Electron Configuration: Elements in the same main group have identical valence electron configurations. For example, elements in Group 1 (alkali metals) all have one valence electron in their outermost energy level (ns¹), while elements in Group 18 (noble gases) have a full outermost energy level.
2. Chemical Reactivity: Due to their identical valence electron configuration, elements in the same group show similar chemical reactivity. They tend to form similar types of chemical bonds and react similarly with other elements to achieve a more stable electron configuration.
3. Periodic Trends: Main group elements within a group exhibit predictable trends in their physical and chemical properties as you move from the top to the bottom of the group. For example, the atomic radius tends to increase, ionization energy tends to decrease, and metallic character tends to increase as you go down a group.
To know more about periodic table here
https://brainly.com/question/28747247
#SPJ2
if answered correctly i will give brainlest
Answer: Earthquake location
Explanation:
Answer:
Volcano chains and arcs, and earthquake locations
Which term refers to the number of moles of solute per liter of solution?
Question 1 options:
mole fraction
saturation
concentration
molarity
Answer:
molarity
Explanation:
Explain what a convection current is and how it causes winds in the atmosphere.
At standard pressure, a sample of oxygen occupies 31 ml. What volume does the gas occupy when the pressure is 2 atm?
Answer:
I don't know
Explanation:
sorry I don't know
When you push or pull something, you are creating
force but could be tension
A double replacement reaction has two compounds as reactants.
True or false
Answer:
yes, A double replacement reaction has two compounds as reactants.
hence it's true.......
Answer:
it's true...
Explanation:
Brainliest to right answer
An atom of an element always contains
Answer:
An atom of an element always contain three fundamental particles called electrons(e-) , neutron ( n zero) and protons ( p+)
An atom of an element always contains a proton, electron and neutron.
What is an atom ?Every atom is made up of a nucleus and one or more electrons that are attached to the nucleus. One or more protons and a number of neutrons make up the nucleus. Only the most common type of hydrogen is neutron-free. Every solid, liquid, gas, and plasma is made up of atoms that are either neutral or ionized.
But when it comes to the word atom, we must go back to 400 B.C. Greece. And Democritus, a brilliant philosopher, proposed the Greek word atomos, which means uncuttable.
Every atom is made up of a nucleus and one or more electrons that are attached to the nucleus. One or more protons and a number of neutrons make up the nucleus.
Thus, An atom of an element always contains a proton, electron and neutron.
To learn more about an atom, follow the link;
https://brainly.com/question/29695801
#SPJ2
Which of these indicates that a liquid has transferred thermal energy to the air?
O The liquid increases in temperature, and its particles lose kinetic energy
O The liquid decreases in temperature, and its particles gain kinetic energy
O The liquid increases in temperature, and its particles gain kinetic energy.
O The liquid decreases in temperature, and its particles lose kinetic energy
No
Answer:
The liquid decreases in temperature and its particles lose kinetic energy.
Temperature is proportional to kinetic energy, so if temperature decreases, kinetic energy decreases. Energy has been removed from the liquid, because it is in the air
A gas in the form of Bubbles is released is it a chemical change or a physical change
Answer:
The formation of a gas is a clue to chemical changes. The bubbles of gas that you observed form when an antacid is dropped into water is an example of change. Another clue that a chemical change has occurred is the formation of a solid.
Explanation:
What do the colors of light combine to make _______________ light.
the answer is dure light I'm not sure of this answer ,but it might be to go with .
1. A sample of naproxen has 6.022x10^23 naproxen molecules. How many moles is this?
Answer:
0.99997661 moles
Explanation:
Answer:
ysys7sbssiej hsbed hdbd hdbd
what makes sherbet fizzy
Answer:
The chemical reaction between the citric acid and sodium bicarbonate
Explanation:
Pleade help me! (If you guys unfortunately I am going to report you) Thank you
Answer:
answer 3
Explanation:
Please help with this question
THE ANSWER IS c:0%
HOPE IT MAY HELPS YOUIt takes 5.54 mL of a 2.18 M NaOH solution to neutralize 6.19 mL of an HCl solution. What is the concentration of the HCl solution? Do not include units in your
answer. Round to the tenths place or further.
Answer:
2 M
Explanation:
NaOH + HCl --> NaCl + H2O,
5.54 mL = .00545 L,
If we consider 2.18 M, M [molarity] = mol/L, so we have 2.18 mol/L. From this we can get the moles of NaOH.
.00545 L * 2.18 mol/L ≈ .0121 mol
The concentration of HCl can be found from the following:
.0121 mol = .00619(x) [where x = concentration of HCl]
x = 1.955 M ≈ 2 M
We equate the two as we require the same amount in order to neutralize the base.
Why is fluorine a gas at room temperature?
GIVING BRAINLIEST AND LOTS OF POINTS ‼️‼️
Answer:
In fluorine, the electrons are tightly held to the nuclei. The electrons have little chance to wander to one side of the molecule, so the London dispersion forces are relatively weak. At a low enough temperature the molecules will all be solids. At a high enough temperature they will all be gases.
Explanation:
Does pure water conduct electricity? if not, what can we do to make it conducting?
Explanation:
Pure water does not conduct electricity. This is because pure water do not contain any salts. Pure water can conduct electricity when common salt is added to it, as salt solution is conducting in nature.
CAVA Chemistry 302/303B Unit 2 Lab Report
THE MYSTERY SALT
Imagine that you have a barrel of salt, but you forgot to label it. You know it must be either KNO3, or KCl.
You look at the solubility curves for KNO3 and KCl and you find that at 35 degrees Celsius, 100 g of water can dissolve about 30 g of KNO3, or about 37 g of KCl.
The solubility curves disappear. You only remember the solubility for both salts at 35 degrees Celsius in 100g of water. You know absolutely nothing else about these salts.
You have a scale, a hot plate, a thermometer, empty beakers, and plenty of water. You do NOT have any labeled KNO3 or KCl.
1. What property can you use to determine whether the barrel contains KNO3 or KCl? Hint: Name the property you could use to identify the mystery salt? (1 point)
2. Explain exactly what you would do. Another person should be able to perform your test by following your procedure. Do not bother with why you are doing these steps. Just tell me exactly what to do to perform this test. Hint: Do NOT include any discussion of your results. Save that for #3. (2 points)
3. How would your results identify the mystery salt? Hint: What exact results would indicate KNO3? What results would indicate KCl? (2 points)
Name:
Answers
1 (Property):
2 (Procedure):
3 (Results):
Which group of microorganisms has the ability to mutate?
Help me please
Answer & exp.
Explanation:
Some Rules Regarding Oxidation Numbers:
- Hydrogen has oxidation number of + 1 except in hydrides where it is -1
- Oxygen has oxidation number of -2 except in peroxides where it is -1
- Some elements have fixed oxidation numbers. E.g Halogen group elements has oxidation number of -1
- Oxidation number of a compound is the sum total of the individual elements and a neutral compound has oxidation number of 0.
A. HI
Hydrogen has oxidation of + 1
Oxidation number of I:
1 + x = 0
x = -1
B. PBr3
Br has oxidation number of - 1
Oxidation number of Pb:
x + 3 (-1) = 0
x = + 3
C. KH
Hydrogen has oxidation of + 1
Oxidation number of K:
1 + x = 0
x = -1
D. H3PO4
Hydrogen has oxidation number of + 1
Oxygen has oxidation number of -2
Oxidation number of P:
3(1) + x + 4(-2) = 0
3 + x - 8 =0
x = 5
PLEASE HELP ASAP
During convection heat is transferred through fluids. Which statement is true about fluids?
Only gasses are fluids
Only liquids are fluids
Only solids are fluids
Both liquids and gasses are fluids
An independent variable is
a.
directly changed by the experimenter.
b.
manipulated by changes to the dependent variable.
C.
a variable that is kept constant.
d.
a variable that is used as a control.
Answer:
a. directly changed by the experimenter.
Explanation:
In the case of mathematical modeling, analytical modeling , and experimental sciences, the number of dependent variables based upon the amount of independent variables.
The dependent variables represent the result or outcome whose changes is being determined.
An independent variable expressed in the name form like experimental or expected variable, is a variable i.e. created in an experiment in order to verify the effect on a dependent variable
Therefore the option a is correct
DIMENTIONAL ANALYSIS!
‼️ASAP!!! BRAINLIEST!!‼️
PLS HELP!!! SHOW ALL WORK + STEPS!! Thx!
Answer:
1037.56 mph
Explanation:
We are told the distance around the earth which is the circumference is 40075 km.
Converting to miles gives 24901.451 miles
Formula for speed = distance/time
Time for one rotation is 24 hours.
Thus, speed = 24901.451/24 = 1037.56 mph
Hey. Answers to this?:
I set off on a journey from the Earth to our nearest galaxy - ________. It will take me around 2 million ______ ______ before I reach my destination. As my space shuttle ascended it went through the Earth’s atmosphere in a great display of glowing lights. I reached the _______ __________ zone and started to float in my cockpit. The spacecraft went farther away, making the Earth look much smaller. I saw the bright light of our ________ _________ - the Moon. I speeded up, crossing the orbit of our ________ _______ - Mars. It took a great deal of skill to safely manoeuvre my spacecraft through the area of giant, rocky pieces of cosmic rubble, known as an _____ ______. As I accelerated, I entered the region of our ________ _______. I went zooming past Jupiter, Saturn and ________. I took a glimpse of our poor demoted dwarf planet - _______. Eventually, I was far enough to reach the outer edges of our ______ _______, with our star _________ in the centre. From that point on I accelerated rapidly, zooming out of our galaxy - ________ _____. What a spectacular view it was to see all the ____ ______ stars spinning in a giant whirlpool of light. Soon I reached the outer edges of our galaxy and went zooming away through the unknown towards Andromeda.
Missing words: the Sun, natural satellite, Uranus, asteroid belt, the Milky Way, outer planets, light years, Pluto, 400 billion, the Andromeda, inner planet, Solar System, zero gravity,
Which of the following processes is involved in the formation of sedimentary rocks?
O metamorphism
O cooling
O subduction
O deposition
Answer:
deposition
Explanation:
how many molecules are there in 0.45 moles of so3
Answer:
2.71
Explanation:
Calculate the number of moles that are in 2.0 L of a 0.75 M solutions of NaCl
Answer:
1.5
Explanation:
0.75M=Moles/2L
The solubility of potassium sulfate in water is 16 grams per 100
milliliter at 50 degrees centigrade. The smallest amount of water
which will dissolve 4 grams of this substance at the same temperature
will be
The answer is 25 grams for this question