Is it correct ?!???!);$);

Answer:

10m\s

Explanation:

given

initial velocity(u)=0

final velocity (v)=100

acceleration(a)=?

we know,

acceleration = v-u/t

= 100-0\10

= 10 m\s

Answer:

follow the above attachment.

Explanation:

hope this will help...

A. Sodium bicarbonate is a water treatment method used to soften water (removing calcium and magnesium impurities from it) in older water softener systems. The process uses a chemical reaction to convert the calcium hydroxide (or magnesium hydroxide) into calcium carbonate, which isn't water soluble.

B. Alum, also known as potassium aluminum sulfate, can be used to purify water. ... Add 1.4 ounces of alum powder to the contaminated water in the reaction vessel and carefully stir the mixture with the stirring stick for at least five minutes. Sediment will form as the phosphorous in the water binds with the alum powder.

C. If Copper sulphate crystals are added to water it is called 'hydrated copper sulphate solution'.

If it is added to cold water then:-

it is more saturated

but if it is added to warm water then:-

it is unsaturated

and it turns bluish in colour in dissolving in water

D.  Sodium hydroxide is used in the treatment of drinking water to raise the pH of the water to a level that minimizes the corrosion. Raising the pH remains one of the most effective methods for reducing lead corrosion and minimizing lead levels in drinking water.

Answer:

B. Flooding

Explanation:

Flooding can be caused by heavy rains/storm surges. Hope this helped!

Even in pitchblende, polonium is exceedingly rare: 1,000 tons of ore must be treated to yield 40 milligrams of polonium. It has a one-part-in-ten-thousandth-thousandth-thousandth-thousandth-thousandth-thousandth It is found in nature as a byproduct of the radioactive decay of uranium, thorium, and actinium.

Atomic Number: 210

Answer:

nonmetal

Explanation:

In a covalent bond, the atoms bond by sharing electrons. Covalent bonds usually occur between nonmetals. For example, in water (H2O) each hydrogen (H) and oxygen (O) share a pair of electrons to make a molecule of two hydrogen atoms single bonded to a single oxygen atom.

Answer:

3rd  lawl

Explanation:

a rifle kick is when you fire a projectile and you feel a force pushing against your hand. Rifles normally have heavier projectiles so there is more force pushing back against you. example, if you were sitting on a spinny chair with wheeles and your friend is sitting on another, and you push each other while on the chair, you will both go backward, but the lighter person will go back more. for every action, there is an equal and opposite reaction

that is the third law, also said as: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body."

Answer:

A.

Explanation:

Answer:Demagnetizing a magnet is also possible. Only a few substances are ferromagnetic; the most common ones are iron, cobalt and nickel and their alloys. The rare-earth metals neodymium and samarium are less common examples.

Explanation;

Answer:

Coordinate-bond meaning

A type of covalent bond in which both the shared electrons are contributed by one of the two atoms. ... The definition of a coordinate bond is a chemical bond between two atoms when one of the atoms shares a pair of electrons.

Explanation:

Explanation:

is a covalent bond in the sharing of electron pair equally between two atoms in which each atom contribute an electron.

it is form when atomic orbitals of atoms each containing an unpaired electron overlap to share the pair of electrons.

Answer: For number 8. I think only one if not i'm so sorry also you would need 143. 0914

Explanation:

Answer:

Hello! :p

I hope this helps! Thank you so much! :)

Sodium chloride reacts with copper sulfate to produce sodium sulfate and copper chloride.

2NaCl(aq) + CuSO4(aq) → Na2SO4(aq) + CuCl2(s)

+

This equation represents a

O synthesis reaction.

O decomposition reaction.

O single replacement reaction.

O double replacement reaction.

double replacement reaction

ありがとう！

Sodium chloride reacts with copper sulfate to produce sodium sulfate and copper chloride. This equation represents a double replacement reaction. Therefore, the correct option is option D.

In a double replacement process, the ions in two input ionic compounds are exchanged for the same ions in two new product compounds. When two reactants swap cations or anions to produce two new products, the process is known as a double replacement reaction.

Double displacement reactions and metathesis reactions are other names for double replacement processes. Double replacement reactions include neutralisation, precipitation, and gas production. Sodium chloride reacts with copper sulfate to produce sodium sulfate and copper chloride. This equation represents a double replacement reaction.

Therefore, the correct option is option D.

To know more about double replacement reaction, here:

https://brainly.com/question/30783535

#SPJ5

Answer

Ions

Explanation

nothing will happen

if you calculate the water potiential for both solutions

you get 2(0.1)(R)(T) and 1(0.2)(R)(T)

which is the same thing, so its isotonic.

Answer: Super idol

Explanation:

chinese malapoks

The student paid an interest of $3,000 over the next five years.

HOW TO CALCULATE INTEREST:

The interest on a borrowed amount of money can be calculated by subtracting the principal from the amount paid over time. That is;

Interest = principal - amount

According to this question, a student borrows $10,000 from a bank but ends up paying $13,000. This means that the principal is $10,000 while the amount is $13,000. The interest is calculated thus;

Interest = $13,000 - $10,000

Interest = $3,000

Therefore, the student paid an interest of $3,000 over the next five years.

Learn more about interest at: https://brainly.com/question/4626564

Answer:

Scientific laws or laws of science are statements, based on repeated experiments or observations, that describe or predict a range of natural phenomena. The term law has diverse usage in many cases across all fields of natural science.

Explanation:

I hope this helps

Answer:

Scientific laws or laws of science are statements, based on repeated experiments or observations, that describe or predict a range of natural phenomena. Scientific law differs from scientific theory. The main difference between a law and a theory is that a theory tries to explain the reasoning behind something that occurs in nature, whereas scientific laws are just descriptive accounts of how something occurs in nature.

Answer:

22 grams

Explanation:

Zn + 2HCl → ZnCl2 + H2

The first step to answering this question is to calculate the amount of moles of HCl needed. We do this by multiplying the coefficient of HCl in the equation over the coefficient of Zn.

0.30mol × [tex]\frac{2}{1}[/tex] = 0.60 mol HCl

Now, to figure out how many grams we must multiply the amount of moles of HCl by it's molar mass. This molar mass can be found by adding the molar masses of all the elements in HCl.

0.60mol × 36.46 g/mol = 21.87g

Using proper sig figs, 22 grams of HCl are required for this reaction.

Answer:

b,a,b

Explanation:

The energy transfers and transformations that occur are kinetic energy is from the person's legs to the pedals and thermal energy due to friction when the wheels get warm.

The law of conservation of energy states that energy can neither be created nor destroyed but can be converted from one form to another.

The energy transfers and transformations that occur when a person rides a bicycle are:

Learn more about conservation of energy here: https://brainly.com/question/24772394

#SPJ6

Answer:

884.6k

Explanation:

Answer:

1.methylcyclobutane

2.1-pentene

3.2-pentene(which can be Cis or Trans)

4.1,3-dimethylcyclopropane

5.ethylcylcopropane

I think these are it? I can't think of any other ones.

Answer:

0.10 M NaHA

Explanation:

Answer:

B

Explanation:

We can see here that the functional group that the molecule have is: B. Carbonyl

A functional group is a specific group of atoms or bonds within a molecule that is responsible for the characteristic chemical reactions and properties of that molecule. Functional groups are the parts of organic molecules that determine their reactivity and the types of chemical reactions they can undergo.

In organic chemistry, functional groups play a crucial role in understanding the structure and behavior of molecules. Different functional groups confer distinct properties to molecules, influencing their physical properties, solubility, acidity or basicity, and interactions with other molecules.

Learn more about functional group on https://brainly.com/question/10058230

#SPJ2

Answer:

C

Explanation:

When Beta decay happens, the atomic number of an element goes up, and that means there is an extra proton. A is not the answer because unstable atoms cause decay. B is also not correct because this is what happens in Beta decay: a neutron becomes a proton. D is not correct because an electron is actually emitted from the nucleus.

Answer:

Volume = 35.3L

Explanation:

Use Ideal Gas Law (PV=nRT) and isolate for V (volume) by dividing both sides by P (pressure). You will then get the eqaution listed below and you can solve by using the method I used below.

V = nRT/P

V = (0.75kPa)(8.314)(298K)/(52.7kPa)

V = 1858.179/52.7

V = 35.3L

Answer:

9.17 g

Explanation:

1) Calculate mols of PCl5

PCl5 (aq) + 4H2O (l) ⟶ H3PO4 (aq) + 5HCl (aq)

Mass of PCl5: 26.5g

Molar Mass of PCl5 208.24g/mol

Mol of PCl5 = Mass PCl5 /Molar mass PCl5  = 26.5g / (208.24g/mol) = 0.127257011 mol

2) Calculate mols of water needed to react

Mols of H2O per 1 Mols of PCl5 = 4 (because 4 water is needed to Phosphorus pentachloride).

Mols of H2O = Mol of PCl5 * 4 = 0.127257011 * 4 = 0.509028044 mols

3) Calculate Grams of water needed to react

Mols of H2O = 0.509028044 mols

Molar Mass of H2O = 18.015 g/mol

Mass of H2O = Mols of H2O * Molar Mass of H2O

= 0.509028044 mols* 18.015 g/mol = 9.17014021 g

sf = 3

9.17 g

Answer:

In the final solution, the concentration of sucrose is 0.126 M

Explanation:

The number of moles of solute in the volume taken from the more concentrated solution will be equal to the number of moles of solute in the diluted solution. Then, the concentration of the first solution can be calculated using the following equation:

Ci · Vi = Cf · Vf

Where:

Ci = concentration of the original solution

Vi = volume of the solution taken to prepare the more diluted solution.

Cf = concentration of the more diluted solution.

Vf = volume of the more diluted solution.

For the first dillution:

26.6 ml · 2.50 M = 50.0 ml · Cf

Cf = 26.6 ml · 2.50 M / 50.0 ml

Cf = 1.33 M

For the second dilution:

16.0 ml · 1.33 M = 45.0 ml · Cf

Cf = 16.0 ml · 1.33 M / 45.0 ml

Cf = 0.473 M

For the third dilution:

20.0 ml · 0.473 M = 75.0 ml · Cf

Cf = 20.0 ml · 0.473 M / 75.0 ml

Cf = 0.126 M

In the final solution, the concentration of sucrose is 0.126 M

hope that help

hope you have a great Christmas

mark me brinilylist