Explanation:
yes its hard if you don't pay attention.
Yes, the math is harder but chemistry is not it's really fun the math does get harder tho.
What is the name given to the group 0 elements
Answer:
the noble gases
HELP IN 8TH GRADE ADV SCIENCE
Answer:
protons: 36
neutrons: 48
electrons: 36
Please I need help I really don’t get this lol
Answer:
The pointer pointing to the grey and white balls are either proton or nuetron i van't really tell cause their grey and white.
The whole clster of balls is the Nucleus
The black balls on the lines are electrons
And the lines are the energy level
Explanation:
Compare the potential energy of two atoms chemically bonded to their potential energy when separated.
Answer:
See explanation
Explanation:
The essence of chemical bonding is in order to attain minimum energy. The minimum energy state is the most stable state of a chemical system.
As the distance of separation between atoms decreases, the potential energy of the system decreases accordingly.
An optimum distance is reached when the two atoms attain the lowest potential energy. This is designated as the bond distance of the two atoms.
Hence two atoms have lower potential energy when bonded than when separated at large distance.
When two atoms are chemically bonded they have Lower potential energies while when they are separated they have higher potential energies
The potential energies of atoms chemically bonded is directly proportional to the distance between the atoms ( i.e as the distance between atoms decrease the potential energies of the atoms decreases accordingly) and this enables chemically bonded atoms to attain a more stable state.
The lower the potential energy of bonded atoms the more stable the element/compound becomes therefore it is necessary that bonded atoms attain the least possible potential energy.
Hence we can conclude that When two atoms are chemically bonded they have Lower potential energies while when they are separated they have higher potential energies .
Learn more : https://brainly.com/question/17637022
Which substance is correctly identified as a homogeneous or heterogeneous mixture?
A. salad -- heterogeneous
B. milk --- heterogeneous
C. river water --- homogeneous
D. beach sand --- homogeneous
Answer:
A
Explanation:
A salad with lettuce, cheese, seeds, tomatoes, broccoli, and other vegetables is an example of a heterogeneous mixture.
Milk is not mixed with anything so that is incorrect
River water is mixed in with dirt and minerals so this one is incorrect
Beach sand is incorrect because you can see colored particles.
In this reaction, how does the rate of forward reaction vary with the concentration of the product?
2H2S(g) ⇌ 2H2(g) + S2(g)
It increases with an increase in the concentration of S2(g).
It decreases with a decrease in the concentration of H2(g).
It increases with a decrease in the concentration of H2(g).
It decreases with an increase in the concentration of S2(g).
It decreases with increase in the concentration of H2(g).
Answer:
c d e
Explanation:
Answer:
C D E
Explanation:
#platogang
Which statement is true about a reaction represented by a chemical equation that shows energy as a reactant?

A.
It absorbs energy.

B.
It releases energy.

C.
It is a replacement reaction.

D.
It is a combustion reaction.
What would happen if a neutron was added to Lithium (7)
Answer:
if you add a neutron to lithium-7 it becomes a compound nucleus of lithium-8
Explain the electroplating process of an iron key with silver. the materials provided for electroplating is AgNO3 solution, silver rod and iron key.
Answer:
See explanation
Explanation:
The process of electroplating an iron key with silver involves electrolysis.
The anode is a silver rod, the electrolyte is AgNO3 solution while the cathode is the iron key. A battery is connected to provide energy to drive the non-spontaneous electrochemical reaction.
Electrons flow from the anode to the cathode. Silver ions from the silver rod replenishes the silver that is deposited on the iron key in order to continue the electrolytic process.
The silver anode is therefore depleted in mass while the iron key increases in mass.
The units of a formula mass are
a. amu
b. micrograms
c. moles
d. grams
Answer:
the units of a formula mass are amu.
Displacement can be added to get the total
a) velocity
b) distance
c) speed
d) acceleration
how is wind energy captured?
where is wind energy found?
how is water energy captured?
where is water energy found?
plz use the passage i put. plz and thank you!!!!!
what is ideal gas constant?? g0ogle doesnt got any good answerss
Answer:
An ideal gas is a gas with particular characteristics.
Explanation:
The particles have no volume All collisions between particles are elastic collisions and lose no kinetic energy The particles neither attract each other nor repel They have random movementIdeal gases are hypothetical which means that they do not exist in their true form.
hope this helps, pls mark brainliest :D
what's the molar mass of Li3p
Answer:
51.79g Li₃P.
Explanation:
Li has a molar mass of 6.94 g (since there are 3, you multiply it 3 times) and P has a molar mass of 30.97 g. 6.94(3) + 30.97 = 51.79g.
How did humans create cow breeds that survive well in cold weather?
Select one:
O
They identified cows that did well in cold weather and mated them.
O
They mated cows with sheep that had very thick wool.
O
They mated cows with caribou that tolerated the cold well.
O
They identified cows that did well in hot weather and mated them
Answer: They identified cows that did well in cold weather and mated them. This is known as selective breeding. All the other answers either cannot work as cross-species breeds generally don't work, or they target cows that survive well in hot weather.
What caused space technology to improve so quickly?
Answer:
“spinoff”
Explanation:
Here is just a sampling of the many “spinoff” technologies, as NASA refers to them, resulting from space research and development that we now use in everyday life.
what method would you use for your hypothesis.
Which of these are an atom's valence electrons?
Answer:
The Outer-most Electron shell contains the valence electrons.
Bonus Info:
Valence Electrons are used by atoms to make ionic bonds.
Answer:
Valence electrons are the electrons in the outermost shell, or energy level, of an atom. For example, oxygen has six valence electrons, two in the 2s subshell and four in the 2p subshell. We can write the configuration of oxygen's valence electrons as 2s²2p⁴.
Explanation:
ur welcome
i was doing this in school and i watched a video
I WILL DIE I HAVE A KNIFE IN MY HAND. ANSWER WITH EXPLANATION. If the sound is high pitched, then the wave's frequency would have a:
A.high frequency, short wavelength
B. high frequency, long wavelength
C. low frequency, long wavelength
D. low frequency, short wavelength
Answer:
A
Explanation:
High frequency, short wavelength
What is the correct order of the scientific method?
Answer:
make an observationask questionsform a hypothesispredict your hypothesistest your hypothesis predictionmake new modifications to your hypothesis (repeat the steps)Explanation:
I hope this helps! :)))
As shown by the periodic table, why do the elements potassium and sodium have similar chemical properties?
Which of the following reactants will generate products with a solution of phosphoric acid?
a
Al(s)
b
Cu(s)
c
Au(s)
d
Ag(s)
Answer:
A. Al(s)
Explanation:
During a chemical or physical change, energy may be...
a. created into another form
b. destroyed and reinvented into another form
c. converted into another form
d. disappeared
Answer: C: Converted into another form
Explanation: pues es esa calale y si va a hacer
During a chemical or physical change, energy is converted to another form. Energy cannot be created or destroyed. During a chemical reaction, physical change the energy and mass are conserved.
What is law of conservation of energy ?According to the law of conservation of energy energy can neither be crated nor be destroyed. Hence, the total energy of a system is always conserved.
However, energy can be transformed from one form to the other. Therefore, the energy lost in one form is gained in another form. For example, in all electrical devices, the electrical energy is converting to other forms of energy such as light, thermal , mechanical etc.
Similarly, during a chemical reaction, the energy released by a reaction system is equal to the energy absorbed by other reacting system. Similarly in electrochemical cells the chemical energy is converting to electrical energy.
Find more on energy transformation:
https://brainly.com/question/17589256
#SPJ6
separation methods for coconut oil and water
Answer:
[tex]\huge\mathtt{{\colorbox{silver}{ANSWER~~~↴}}}[/tex]
we use a separating funnel to separate oil from water , we are using funnel because both water and oil both are immiscible liquids.
the process of separation of oil from water is called filtration ✔️
no copied answer :)
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
What is the molar mass of phosphorus pentachloride and uranium hexafluoride?
Answer:
PCl₅ = 208.22g/mol. UF₆ = 352.03g/mol.
Explanation:
Find the atomic mass of each element–and if there's a subscript (you multiply the atomic mass by that much). P= 30.97g, Cl= 35.45g; 30.97+35.45(5) = 208.22g [same idea with UF₆]
Can someone please help me out
Answer:
a. increases
b. increases
c. decreases
PLEASE HELP !!
Use the diagram below to answer the following questions.
PLEASE HELP
E TE
Figure B
In Figure B, which region contains the noble gas family of elements?
ОА
OD
ОС
OB
Noble gas located in the region D
Further explanationNoble gas are located in group 18 in the periodic table consisting of helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), have a stable electron configuration where the valence electrons are 8(full outer shell of electrons), so it is very hard to react because of its stability
If we look at the periodic system of the elements, the noble gases are on the far right, so that in Figure 8 it is located in area D
And the other region :
A : alkali elements(group 1),
B : alkaline earth elements(group 2)
C : halogen elements(group 17)
An object is placed at 0 on a number line. It moves 3 units to the right, then 4 units to the left, and then 6 units to
the right. What is the displacement of the object?
1
5
7
13
Answer:
the answer will be five
Explanation:
i got this question on a test and i got it right
How many molecules of H2O are in 8.54 moles of H2O?
Select one:
a. 5.14 * 10^24 molecules H2O
b. 2.86 * 10^23 molecules H2O
c. 6.02 * 10^23 molecules H2O
d. 5.14 * 10^23 molecules H2O
Answer:
[tex]\boxed {\boxed {\sf A. \ About \ 5.14 *10^{24} \ molecules \ H_2O}}[/tex]
Explanation:
To convert from moles to units, we must use Avogadro's Number: 6.022 * 10²³
This tells us the number of units (molecules of water in this problem) in 1 mole of a substance (water). We can use it as a ratio or fraction.
[tex]\frac{6.022 *10^{23} \ molecules \ H_2O}{1 \ mol \ H_2 O}[/tex]
Now, we can multiply this fraction by the moles of water (8.54) given.
[tex]8.54 \ mol \ H_2O*\frac{6.022 *10^{23}\ molecules \ H_2O}{1 \ mol \ H_2 O}[/tex]
When we multiply, the moles of water will cancel out.
[tex]8.54 *\frac{6.022 \ molecules \ H_2O}{1 \ }[/tex]
Since the fraction has a 1 as a denominator, we can remove it. The problem will be a simple multiplication problem.
[tex]8.54*6.022 \ molecules \ H_2O[/tex]
[tex]5.142788*10^{24} \ molecules \ H_2O[/tex]
The original measurement of 8.54 has 3 significant figures (8, 5, and 4). Therefore, we must round our answer to 3 sig figs, which is the hundredth place in this case.
The 2 in the thousandth place tells us to leave the 4 in the hundredth place.
[tex]5.14 *10^{24} \ molecules \ H_2 O[/tex]
There are about 5.14*10²⁴ molecules of water in 8.54 moles.
Answer:
5.14 x 10^24 molecules of H2O.
Explanation:
just took the test
how does the immune system uses feedback mechanisms?
Answer:The main job of the innate immune system is to fight harmful substances and germs that enter the body, for instance through the skin or digestive system. The adaptive (specific) immune system makes antibodies and uses them to specifically fight certain germs that the body has previously come into contact with.