Is electrical energy the same or different from energy it takes to play a soccer game

Answer:

Thermal Conductivity Easily Transmits Heat Among Fine Ceramics

a.

The object's speed at 2.20 m below balcony level is 8.74 m/s

Let the balcony level be 0 m and the height above the balcony level be positive and height below the balcony level negative.

Using the principle of conservation of energy, the total energy at a vertical height of 1.89 m above the balcony level equals the total mechanical energy when the object is 2.20 m below the balcony level and

So, E = E'

U + K + f = U' + K' + f'

where U = initial potential energy at 1.89 m = mgh, K = initial kinetic energy at 1.89 m = 0 J(since it is released from rest), f = energy loss at 1.89 m = 0 J, U' = final potential energy at 2.20 m below balcony level = mgh', K = final kinetic energy at 2.20 m = 1/2mv², f' = energy loss at 1.89 m = 10%U = 0.10mgh(since 10% of the initial energy is lost).

So,

U + K + f = U' + K' + f'

mgh + 0 + 0 = mgh' + 1/2mv² + 0.10mgh

mgh = mgh' + 1/2mv² + 0.10mgh

Dividing through by m, we have

gh = gh' + 1/2v² + 0.10gh

So, gh -  0.10gh = gh' + 1/2v²

0.90gh = gh' + 1/2v²

1/2v² = 0.90gh - gh'

1/2v² = g(0.90h - h')

v² = 2g(0.90h - h')

Taking square-root of both sides, we have

v = √[2g(0.90h - h')]

where v = velocity of object at 2.20 m below balcony level, h = height above the balcony level = 1.89 m, h' = height below the balcony level = -2.20 m and  g = acceleration due to gravity = 9.8 m/s²

Substituting the values of the variables into the equation, we have

v = √[2g(0.90h - h')]

v = √[2 × 9.8 m/s²{0.90 × 1.89 m - (-2.20 m)}]

v = √[2 × 9.8 m/s²(1.701 m + 2.20 m)]

v = √[2 × 9.8 m/s²(3.901 m)]

v = √[76.4596 m²/s²]

v = 8.74 m/s

So, the object's speed at 2.20 m below balcony level is 8.74 m/s

b.

Yes it does matter when we apply 10% loss before V calculations

We need to apply the 10 % loss before V calculations because this would give us a proper value for V since the energy is lost before V is obtained.

So, yes it does matter when we apply 10% loss before V calculations

Learn more about speed of a falling object here:

https://brainly.com/question/18732868

Answer:

Hey mate.....

Explanation:

This is ur answer.....

Jelly is a colloid where colloidal particles are solids which are dispersed in the liquid. Jelly is a fluid which can not be considered as a particular one kind of state. It is in the category of 'gel' which is a colloidal form.

Hope it helps!

Brainliest pls!

Follow me! ;)

Answer:

The importance of signal processing science as has been made clear. Since we now know that it help to convert discrete signal from time domain to frequency domain. Moreover, we are now aware of the difference in DF5 and FFT algorithms as well as the implementation in Matlab.

Answer:

A

Explanation:

Answer: Yes, the " Cosmology, philosophy and physics" is the most famous book of the philosopher, Alexis karpouzos. But and the other books are important. For example, the " The self-criticism of science", the "Universal conscilusness" and the "Non-duality".

Explanation:

Answer:

Explanation:

s 0.12 + 1.20(1.80) = 2.28 m from the top.

Hi there!

We can begin by finding the total time taken for the ball to reach the net using the equation:

dₓ = vₓt

12.9 = 44.7t

12.9/44.7 = t = 0.289 s

Now, we can use the following equation to solve for displacement in the Y direction:

d = y₀ + vit + 1/2at²

There is no initial vertical velocity, so:

d = y₀ + 1/2at²

Plug in known values:

d = 1.28 + 1/2(-9.8)(0.289²)

d = 0.87m

Thus, since 0.87 m < 0.914 m, the tennis ball does NOT make it over the net.

This question involves the concepts of the law of conservation of energy and specific heat capacity.

This collector can deliver "7.96 x 10⁻⁴ m³/min" of water at an output temperature of 60°C.

According to the law of conservation of energy:

Solar Energy = Energy Required to raise the temperature of the water

Solar Power = Energy Required to raise the temperature of the water

[tex]IA=\frac{mC\Delta T}{t}\\\\\frac{m}{t}=\frac{IA}{C\Delta}[/tex]

where,

[tex]\frac{m}{t}[/tex] = mass flow rate = ?

I = solar radiation = 660 W/m²

A = Area = 3.8 m²

ΔT = change in temperature = 60°C - 15°C = 45°C

C = specific heat capacity = 4200 J/kg.°C

Therefore,

[tex]\frac{m}{t}=\frac{(660\ W/m^2)(3.8\ m^2)}{(4200\ J/kg.^oC)(45^oC)}\\\\\frac{m}{t}=(0.0133\ kg/s)(\frac{60\ s}{1\ min})\\\\\frac{m}{t}=0.796\ kg/min[/tex]

Now, the volume flow rate will be:

[tex]\frac{V}{t}=\frac{(\frac{m}{t})}{(density\ of\ water)}=\frac{(0.796\ kg/min)}{(1000\ kg/m^3)}\\\\\frac{V}{t}=7.96\ x\ 10^{-4}\ m^3/min[/tex]

Learn more about the law of conservation of energy here:

brainly.com/question/20971995?referrer=searchResults

The attached picture explains the law of conservation of energy.

Answer:

17 J

Explanation:

work done= force X distance moved

Hi there!

We know that:

I = Δp = m(vf - vi)

Plug in the given values. Remember to take into account direction ⇒ let the rebound velocity be positive and initial be negative.

I = 1.1(5 - (-23)) = 30.8 Ns

Answer:

3

Explanation:

state of matter are solid

liquid and

gases

Answer:

3

Explanation:

state of a matter are solid liquid and gas

A Torque is a twisting force, or turning moment, it is a vector quantity with both magnitude and direction e.g Turning the handle of a cork-screw clockwise and then counterclockwise will advance the screw first inward and then outward By convention, counterclockwise torques are positive and clockwise torques are negative.

The direction is perpendicular to both the radius from the axis and to the force. It is conventional to choose it in the right hand rule direction along the axis of rotation.

Counterclockwise is the positive rotation direction and clockwise is the negative direction.

Learn more at:

https://brainly.com/question/18253139

Answer:

a battery, wires, and a switch.

Explanation:

All circuits include?

Answer:

Explanation:

Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.

v = at

v = 9.8(3.1)

v = 30.38

v = 30 m/s

max height can be found knowing the velocity is zero at the top of its flight.

v² = u² + 2as

s = (v² - u²) / 2a

s = (0.00² - 30.38²) / (2(-9.8))

s =  47.089

s = 47 m

A stomp rocket takes 3.1 seconds to reach its maximum height then the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.

Velocity is defined as rate of change of position with respect to time.

SI unit of velocity is m/sec. Velocity is a vector quantity.

Given that in the question time taken by rocket to reach maximum height is 3.1 sec. Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.

v = at

v = 9.8(3.1)

v = 30.38

v = 30 m/s

Max height can be found knowing the velocity is zero at the top of its flight.

v² = u² + 2as

s = (v² - u²) / 2a

s = (0.00² - 30.38²) / (2(-9.8))

s =  47.089

s = 47 m

So, the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.

To learn more about Velocity refer to the link:

brainly.com/question/18084516

 #SPJ5

Answer:

You can jump 1.5 feet on Earth.

Explanation:

Because the moons gravity is weaker that earth so it would be easier to jump further on the moon.

At point x = 0, the particle accelerates. Since there will be change of velocity at that point. The the force of the particle will change from negative sign to positive sign according to the given figure, we can therefore conclude that the particle will have a turning point at point x = 0.

Given that a 2.0 kg particle moving along the z-axis experiences the  force shown in a given figure.

Force is the product of mass and acceleration. While acceleration is the rate of change of velocity. Both the force and acceleration are vector quantities. They have both magnitude and direction.

If the particle's velocity is  3.0 m/s at x = 0 m, that mean that the particle experience change of velocity at point x = 0. Since the the force of the particle will change from negative sign to positive sign according to the given figure, we can therefore conclude that the particle will have a turning point at point x = 0.

Learn more here: https://brainly.com/question/20366032

Answer:

12345678910i don't know

Hi there!

We can use work and energy to solve this problem.

We know that:

Ei = Ef

Ei = Potential energy = mgh

Ef = Rotational kinetic + Translational kinetic = 1/2Iω² + 1/2mv²

The barrel is comprised of a hollow cylinder and disk-shaped bottom, so:

I (hollow cylinder) = mr²

I (disk) = 1/2mr²

Calculate the moment of inertias of each.

Since the mass on the base is one-fourth of its side:

x = mass of side

x + x/4 = 15

4x + x = 60

5x = 60

x = 12 kg

end mass = 3 kg

Solve for each moment of inertia:

Side: (12)(0.4²) = 1.92 Kgm²

Bottom: 1/2(3)(0.4²) = 0.24 Kgm²

Side + bottom = 2.16 Kgm²

We can now solve:

mgh = 1/2mv² + 1/2(2.16)v²/r²

(15)(9.8)(33) = 1/2(15)v² + 1/2(13.5)v²

4851 = 14.25v²

v = 18.45 m/s

Answer:

Sample Response: No image will be formed because the rays will not converge to or diverge from a common point.

Explanation:

9514 1404 393

Answer:

  about 5.89 seconds

Explanation:

The penny will hit the ground at the same time it would if it were simply dropped. The equation for the vertical motion is ...

  h(t) = -4.9t^2 +170 . . . . . where 170 is the initial height in meters

h(t) = 0 when ...

  4.9t^2 = 170

  t = √(170/4.9) ≈ 5.89

The penny will hit the ground in about 5.89 seconds.

Explanation:

The buoyant force [tex]F_B[/tex] is defined as

[tex]F_B = \rho_wgV[/tex]

where [tex]\rho_w[/tex] is the density of the displaced fluid (freshwater), g is the acceleration due to gravity and V is the volume of the submerged object. In the case of freshwater, its density is [tex]997\:\text{kg/m}^3.[/tex] Since the buoyant force is 20 N, we can solve for the volume of the displaced fluid:

[tex]F_B = \rho_wgV \Rightarrow V = \dfrac{F_B}{\rho_wg}[/tex]

Plugging in the values, we get

[tex]V = \dfrac{20\:\text{N}}{(997\:\text{kg/m}^3)(9.8\:\text{m/s}^2)}[/tex]

[tex]\:\:\:\:\:= 2.05×10^{-3}\:\text{m}^3[/tex]

Recall that the weight of an object in terms of its density and volume is given by

[tex]W = \rho gV[/tex]

Using the value for the volume above, we can solve for the density of the object as follows:

[tex]\rho = \dfrac{W}{gV} = \dfrac{900\:\text{N}}{(9.8\:\text{m/s}^2)(2.05×10^{-3}\:\text{m}^3)}[/tex]

[tex]\:\:\:\:\:= 44,798\:\text{kg/m}^3[/tex]

Hi there!

With a Force/Displacement curve, we must take the integral (area underneath the curve) to calculate the work done.

We know that:

W = ΔKE

Calculate the work by finding the area underneath the force curve from

x = 0 to 3 m:

We can use a trapezoid:

A = 1/2(3 + 2)(3) = 7.5 J

This is the amount of work done, and since the object starts from rest:

7.5J = KEf - KEi (0 J)

7.5J = KEf = 7.5 J

The Celcius Scale is called an absolute Temperature scale,and it's zero point called absolute zero

_______________

Correct option is B 8 cm.

Let radius of gyration for the axis not passing through center of mass be r and that for the axis passing through the center of mass be k and the distance between the two parallel axes be a.

Parallel axes theorem gives:

Thus, option B is the correct answer.

Answer:

When you are wet or you are sweating current passes easily.

Explanation:

wetness increases conductivity. therefore 'when it is wet'.

: [tex] \implies[/tex] The Photosynthesis is the process of capturing light energy and transforming it into chemical energy. Green plants and several other organisms use light energy and convert carbon dioxide and water into glucose. In this process, oxygen is produced as a by-product

→ We also who how it's process occur

Photosynthesis Equation

6CO2 + 6H2O = C6H12O6 + 6O2

Importance of Photosynthesis

Photosynthetic Pigments

The Factors Affecting Photosynthesis

Various factors influence/affect the photosynthesis process. These are:

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Hope it's helps !!

Answer:

we know that

s=vt

given

v=5.4 m/s

t=12 s

s=5.4 m/s*12 s=64.8m

Explanation:

Hope this helps:)