Answer:
no it's opaque
hope this helps
have a good day :)
Explanation:
An ideal spring is mounted horizontally, with its left end fixed. The force constant of the spring is 170 N/m. A glider of mass 1.2 kg is attached to the free end of the spring. The glider is pulled toward the right along a frictionless air track, and then released. Now the glider is moving in simple harmonic motion with amplitude 0.045 m. The motion is horizontal (one-dimensional). Suddenly, Slimer* holding an apple flies in and approaches the glider. Slimer drops the apple vertically onto the glider from a very small height. The apple sticks to the glider. The mass of the apple is 0.48 kg.
Required:
Calculate the new amplitude of the motion of the glider with apple if the apple is dropped at the moment when the glider passes through its equilibrium position, x = 0 m.
Answer:
Explanation:
First of all we shall find the velocity at equilibrium point of mass 1.2 kg .
It will be ω A , where ω is angular frequency and A is amplitude .
ω = √ ( k / m )
= √ (170 / 1.2 )
= 11.90 rad /s
amplitude A = .045 m
velocity at middle point ( maximum velocity ) = 11.9 x .045 m /s
= .5355 m /s
At middle point , no force acts so we can apply law of conservation of momentum
m₁ v₁ = ( m₁ + m₂ ) v
1.2 x .5355 = ( 1.2 + .48 ) x v
v = .3825 m /s
= 38.25 cm /s
Let new amplitude be A₁ .
1/2 m v² = 1/2 k A₁²
( 1.2 + .48 ) x v² = 170 x A₁²
( 1.2 + .48 ) x .3825² = 170 x A₁²
A₁ = .0379 m
New amplitude is .0379 m
The formula for average speed is
Answer:
Explanation:
The most common formula for average speed is distance traveled divided by time taken. The other formula, if you have the initial and final speed, add the two together, and divide by 2
A wave that has smaller amplitude than another carries less _______
Answer:
A wave that has smaller amplitude than another carries less what
Waves that have smaller amplitude have less energy. the particles of the waves. rarefactions are far amplitude waves. Wavelength is the distance from one crest to the next crest or from one trough to the next trough.
Explanation:
How much heat is required to change 70 grams of water to steam at 100°C. (Lv=2.3 × 10^6J/kg)
161 J
161000 J
32857.14 J
32857142.86 J
Answer:
161000 J
Explanation:
Please do mark as brainliest. Hope this helps! :)
Cora’s doctor suspects that she has acid reflux. He prescribes
for her.
Answer: antacids
Explanation: Excess acid secretion in the stomach often causes nausea, chest pain, and leaves a bitter taste in the mouth. Doctors perscribe antacids to neutralize the acid.
Answer: antacids
Explanation: Excess acid secretion in the stomach often causes nausea, chest pain, and leaves a bitter taste in the mouth. Doctors perscribe antacids to neutralize the acid.
Assume that the roller coaster track has no friction, which means there's no heat transfer from
the track to the surroundings. How does lack of friction affect the energy of the roller coaster
System?
Answer:
No energy leaves the system if there’s no friction between the cars and the tracks.
Explanation:
The lack of friction affects the energy of the roller coaster system. Because no energy leaves the system if there is no friction between the cars and the rails.
What is the friction force?It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N).
Gravitational potential and kinetic energy, which are the roller coaster's usable energies, are converted to heat energy by friction.
A roller coaster is affected by air friction and resistance since it is in the air, and this creates a force that opposes the movement of the cart.
A portion of the energy is lost as a result of friction caused by the brakes, wind drag on the train, and friction between the wheels and the rails.
Since there is no friction on the roller coaster track, there is no heat transmission from the track to the environment.
The roller coaster system's energy is impacted by the absence of friction. Because if there is no friction between the automobiles and the rails, no energy exits the system.
Hence, lack of friction affects the energy of the roller coaster system.
To learn more about the friction force refer to the link;
https://brainly.com/question/1714663
#SPJ2
If a small appliance is rated at a current of 10 amps and a voltage of 120 volts,
what is the power rating?
Answer:
P=1200watts
Explanation:
Power=voltage*current
V=120v
I=10A
P=120v*10A
P=1200watts
The correct option about power rating is, “1200 V”.
What is Power?The quantity of energy moved or transformed per unit of time is known as power, and its unit is "watt".
What are the different formulas for power?Power = Potential Difference × CurrentPower = ( Current )² × ResistancePower = ( Potential Difference )² / ResistanceHow to solve this question?We have given Potential Difference and current
So, we can use the formula which contain Potential Difference and current.
Which is,
Power = Potential Difference × Current
Power = 120 × 10 watts
Power = 1200 watts
Hence the power rating came out to be 1200 watt after solving.
Learn more about Electric Power here:
https://brainly.com/question/3631756
#SPJ2
Una maquina lleva un paquete de 14 kg desde una posicion inicial de di = (1.5i + 1.75j + 1.2k) m en t = 0 a una posicion final df = (8.5i + 13j + 8.2k) m en t = 12 s. La fuerza constante que la maquina ejerce sobre el paquete es F = (2i + 4j + 6k) N. Para ese desplazamiento, encuentre (a) el trabajo que realiza la fuerza de la maquina sobre el paquete y (b) la potencia promedio de la fuerza de la maquina sobre el paquete
(a) Calculate the displacement r :
r = (8.5 i + 13 j + 8.2 k) m - (1.5 i + 1.75 j + 1.2 k) m
r = (7 i + 11.25 j + 7 k) m
The work W done by F in the direction of this displacement is
W = F • r = (2 i + 4 j + 6 k) N • (7 i + 11.25 j + 7 k) m
W = (2×7 + 4×11.25 + 6×7) Nm = 101 J
(b) The average power P of the machine is then
P = W / ∆t = (101 J) / (12 s)
P = 101/12 J/s ≈ 8.42 W
Draw Aufbua diagram of sodium ion
Answer:
Aufbau diagram of sodium ion:
2s²,2p⁶,3s¹
I get feel rushed a lot of times when I’m not even being rushed and it gives me headaches and I feel like I’m breathing hard. Does this mean I have anxiety?
after a spring is compressed 0.2 meters from its uncompressed length it exerts a 20 newton force on a 0.4 kg block resting on a horizontal frictionless surface. after it is released the block will reach a maximum velocity of
a. 2.1 m/s
b. 3.2 m/s
c. 6.3 m/s
d. 10.0 m/s
e. 100 m/s
show your work.
Answer:
b
Explanation:
just add
After a spring is compressed 0.2 meters from its uncompressed length, it exerts a 20 newton force on a 0.4 kg block resting on a horizontal frictionless surface. after it is released, the block will reach a maximum velocity of 3.2 m/s.
What is velocity ?
The directional speed of an item in motion, as measured by a specific unit of time and viewed from a certain point of reference, is what is referred to as velocity.
Velocity is the pace and direction of an item's movement, whereas speed is the time rate at which an object is travelling along a route. In other words, velocity is a vector, whereas speed is a scalar number.
Velocity is a unit of measurement for motion that begins in one location and moves to another. There are several practical uses for velocity, but one of the more frequent ones is figuring out how quickly you or anything in motion will go from one place to another.
Thus, option B is correct.
To learn more about velocity, follow the link;
https://brainly.com/question/18084516
#SPJ2
Your friend, who is in a field 100 meters away from you, kicks a ball towards you with an initial velocity of 16 m/s. Assuming the grass causes the ball to decelerate at a constant rate of 1.0 m/s2, how long does it take for the ball to reach you?
Answer:
Time, t = 5.355 seconds
Explanation:
Given the following data;
Distance = 100 m
Initial velocity = 16 m/s
Deceleration = 1 m/s²
To find the time, we would use the second equation of motion;
But since the ball is decelerating, it's acceleration would be negative.
S = ut + ½at²
Where;
S represents the displacement or height measured in meters.
u represents the initial velocity measured in meters per seconds.
t represents the time measured in seconds.
a represents acceleration measured in meters per seconds square.
Substituting into the equation, we have;
100 = 16t - 0.5t²
200 = 32t - t²
t² + 32t - 200 = 0
Solving the quadratic equation using the quadratic formula;
The quadratic equation formula is;
[tex] x = \frac {-b \; \pm \sqrt {b^{2} - 4ac}}{2a} [/tex]
Substituting into the equation, we have;
[tex] x = \frac {-32 \; \pm \sqrt {32^{2} - 4*1*(-200)}}{2*1} [/tex]
[tex] x = \frac {-32\pm \sqrt {1024 - (-800)}}{2} [/tex]
[tex] x = \frac {-32 \pm \sqrt {1024 + 800}}{2} [/tex]
[tex] x = \frac {-32 \pm \sqrt {1824}}{2} [/tex]
[tex] x = \frac {-32 \pm 42.71}{2} [/tex]
[tex] x_{1} = \frac {-32 + 42.71}{2} [/tex]
[tex] x_{1} = \frac {10.71}{2} [/tex]
x1 = 5.355
We do not need the negative value of x, so we proceed.
Therefore, time = 5.355 seconds
Giving 10$ psn card if someone help
Answer:n 10 n = 1.0197
Explanation: Hope this helps
Answer:
second one
Explanation:
circle the second one
Which of the following is NOT a mental process?
Select one:
a. Walking on the beach
b. Solving the math problem
c. Thinking of the correct answer
d. Choosing the right answer
Answer:
Its A. Walking on the beach
Answer:
walking on a bench is the answer
A 10,000kg space ship is orbiting the moon with a radius of 25km from the ship to the center of the moon. It's tangential speed is 125m/s. What is the ships centripetal acceleration?
Is this the correct set-up for this problem.
ac=10,000kg(125m/s)2/25,000m
True or False?
Answer:
False
Explanation:
ac = v^2/r
acceleration is not dependent on the mass of the orbiting object.
you push on a 35N object for 3 seconds. find work?
Answer:
This question is improper, The Formula for work is force times distance, it only provides you with force and time so you cannot calculate work without the distance, Maybe you've mistaken work for power, The formula is work divided by time, but ask your teacher to provide you with more information because this entire question is WRONG. If it didnt give you a distance there is a possibility that it's 0 which would be 35N*0m, get some clarification.
Explanation:
INCORRECT question
W=F*D
P=W/T
Answer the following: What is astronomy?
Answer:
Explanation:
The branch of science which deals with celestial objects, space, and the physical universe as a whole.
Answer:
The study of the stars, planets, and galaxies. People study astronomy to origins and evolution of our celestial objects and phenomena
Explanation:
Two ship fog horns have different frequencies. They are both being blown at the same time. You hear a sound that varies in amplitude, with the time between a minimum in loudness and the next maximum in loudness being 0.14 seconds. You know the fog horn with the lower pitch has a frequency of 173.5 Hz. What is the frequency of the fog horn with a higher pitch
Answer:
the frequency of the fog horn with a higher pitch is 177.07 Hz
Explanation:
Given the data in the question;
time between a minimum and the next maximum in loudness = 0.14 seconds
So,
Time T between the two continuous maximum in loudness will be;
⇒ T = 2 × 0.14 sec
T = 0.28 seconds
Thus, beat frequency [tex]f_b[/tex] will be;
[tex]f_b[/tex] = 1 / T
we substitute in the value of T
[tex]f_b[/tex] = 1 / 0.28
[tex]f_b[/tex] = 3.5714 Hz
Now, we know that; [tex]f_b[/tex] = [tex]f_2[/tex] - [tex]f_1[/tex]
we solve for [tex]f_2[/tex]
[tex]f_2[/tex] = [tex]f_b[/tex] + [tex]f_1[/tex]
given that; the lower pitch has a frequency of 173.5 Hz
we substitute
[tex]f_2[/tex] = 3.5714 Hz + 173.5 Hz
[tex]f_2[/tex] = 177.07 Hz
Therefore, the frequency of the fog horn with a higher pitch is 177.07 Hz
high temperature in metals leads to decrease in conductivity while increase in Temperature conductivity in semiconductor increases, why?
Answer:
.
The conductivity of metals decreases with increasing temperature because of thermal agitation of the conduction electrons, which impedes their movement in response to an electric field and therefore lowers the drift velocity.
A 160 g air-track glider is attached to a spring. The glider is pushed in 11.2 cm and released. A student with a stopwatch finds that 14.0 oscillations take 19.0 s . You may want to review (Pages 400 - 402) . For help with math skills, you may want to review: Solving Radical Equations For general problem-solving tips and strategies for this topic, you may want to view a Video Tutor Solution of Mass on a spring. Part A What is the spring constant
Answer:
k = 3.41 N/m
Explanation:
The time period is given as:
[tex]T = \frac{time\ taken}{No.\ of\ oscillations} \\\\T = \frac{19\ s}{14} \\\\T = 1.36\ s[/tex]
Another formula for the time period of the spring-mass system is:
[tex]T = 2\pi\sqrt{\frac{m}{k}} \\\\(1.36\ s)^2 = 4\pi^2\frac{0.16\ kg}{k}\\\\k = \frac{(4\pi^2)(0.16\ kg)}{(1.36\ s)^2}\\\\[/tex]
k = 3.41 N/m
This same experiment is performed on the international space station. What is the primary issue with performing this experiment in the absence of gravity
Answer:
Difference in experimental data.
Explanation:
There is difference of experimental value between the experiment that is performed on the earth and on the international space station because presence of gravity. The result of the experiment on the earth is different due to the presence of gravity that contributes in the result of the experiment as compared to international space station where no gravity is present so there is high difference of the numerical value of the result of both experiments of earth and international space station.
Describe what happens to the system inside of a refrigerator or freezer in terms of heat transfer, work, and conservation of energy. Confine yourself to time periods in which the door is closed.
A. Work is done on the system and heat is transferred from the system for a net decrease in internal energy.
B. Work is done on the system and heat is transferred into the system for a net increase in internal energy.
C. Work is done by the system and heat is transferred into the system for a net decrease in internal energy.
D. Work is done by the system and heat is transferred from the system for a net decrease in internal energy.
Answer: A. Work is done on the system and heat is transferred from the system for a net decrease in internal energy.
Explanation:
A refrigerator is a device which dispenses heat from the close system to a warmer area or in the surrounding. By dispensing the heat the internal temperature of the refrigerator drops. The system of refrigerator violates the second law of thermodynamics. As it performs the work to cool the region instead of heating the region. The work is done on the system and the internal energy decreases and the heat energy is liberated to the surrounding area. A refrigerator is an open system.
how much potential energy is stored on a stone kept on the earth surface? Why?
Answer:
When the body is kept at the surface there height of the stone is equal to zero. hence, if the height of the stone is zero then Potential energy is equal to zero
Explanation:
Who is your greatest scientist, and what was his or her achievement? « brainliest assured»
Answer:
My greatest scientist is David Baltimore.
Explanation:
David Baltimore is an American biologist, university administrator, and 1975 Nobel laureate in Physiology or Medicine. He is currently President Emeritus and Distinguished Professor of Biology at the California Institute of Technology, where he served as president from 1997 to 2006.
Hope I helped! Ask me anything if you have any questions. Brainiest plz!♥ Hope you make a 100%. Have a nice morning! -Amelia♥
Why do we see the sun before it actually rises in the morning?
Answer:
. As the sun's rays travel through space, they pass through a rarer to a denser medium, bending slightly towards normal at each refraction and become visible to us before the actual dawn.
Explanation:
Which statement is true about the image produced by a plane mirror?
A. It appears to be located on the same side of the mirror as the object
B. It appears to have reversed left and right, relative to the object
Answer:
B. It appears to have reversed left and right, relative to the object
*help FAST* !15 pts!
What is needed to build a laser?
A. a concave lens and a convex lens that are fully reflective.
B. Two partially reflective mirrors
C. Two fully reflective mirrors
D. A partially reflective mirror and a fully relfective mirror.
Answer:
I believe it is A but I'm not sure
If an electromagnetic wave has a frequency of 6 x 105 Hz, what is its
wavelength? Use 1 = The speed of light is 3 x 108 m/s.
f
v
A. 2 x 10-3 m
B. 5 x 1014 m
C. 5 x 102 m
D. 2 x 1012 m
Answer:
500 m
Explanation:
Applying,
v = λf.................... Equation 1
Where v = speed of light, λ = wave length, f = frequency of light.
make λ the subject of the equation
λ = v/f............... Equation 2
From the question,
Given: v = 3×10⁸ m/s, f = 6×10⁵ Hz
Substitute these values into equation 2
λ = 3×10⁸/6×10⁵
λ = 500 m
NEED BOTH QUESTIONED ANSWERED ASAP.
2. What is the color of the stars with the lowest surface temperature?
4. Is the surface temperature of white dwarf stars higher or lower than red super giants?
Answer:
the answer is the red super giants
Suppose a 44-turn coil lies in the plane of the page in a uniform magnetic field that is directed out of the page. The coil originally has an area of 0.350 m2. It is stretched to have no area in 0.100 s. What is the magnitude (in V) and direction (as seen from above) of the average induced emf if the uniform magnetic field has a strength of 1.00 T
Answer:
Explanation:
Dude no one can answer this on this app