Answer:
c
Explanation:
Answer:
Explanation:
A student pours 10.0 g of salt into a container of water and observes the amount of time it takes for the salt to dissolve. She then repeats the process using the same amounts of salt and water but this time she slowly stirs the mixture while it is dissolving. The student performs the experiment one more time but this time she stirs the mixture rapidly.
Answer:
It will go faster each time because she is stirring therefore the water can get to the salt faster than it just sitting at the top
Explanation:
PLEASE HELP I HAVE 19 MINUTES LEFT I WILL MARK BRAINLIEST
How much more acidic is a pH of 4 as compared to a pH of 6.5?
Answer:
316.227766
Explanation:
A weather balloon has a volume of 105L at 0.97 atm when the temperature is 318K. What is the volume
at 293K and 1.05 atm?
Answer:
89 L
Explanation:
Step 1: Given data
Initial pressure (P₁): 0.97 atmInitial volume (V₁): 105 LInitial temperature (T₁): 318 KFinal pressure (P₂): 1.05 atmFinal volume (V₂): ?Final temperature (T₂): 293 KStep 2: Calculate the final volume of the weather balloon
If we assume that the gas inside the balloon behaves as an ideal gas, we can calculate the final volume of the gas using the combined gas law.
P₁ × V₁ / T₁ = P₂ × V₂ / T₂
V₂ = P₁ × V₁ × T₂ / T₁ × P₂
V₂ = 0.97 atm × 105 L × 293 K / 318 K × 1.05 atm = 89 L
What does the cell theory state? Answer F All organisms are composed of a nucleus G All prokaryotes are composed of multiple cells H All prokaryotes are single celled organisms J All organisms are composed of cells
Answer:
(J) All organisms are composed of cells
A balloon has a volume of 7.00 liters at a pressure of 740 mm Hg. If the temperature remains constant, at what pressure will the volume decrease to 2.00 liters?
a. 749 mm Hg
b. 52.9 mm Hg
c. 211 mm Hg
d. 2590 mm Hg
Answer:
D
Explanation:
P1 x V1 = P2 x V2
7.00(740) = x(2.00)
2590 mm Hg
took me a while because i dont know this, hope its right good luck
What are the missing coefficients for C3H8 + o2 = Co2 +H2O
Answer: C3H8 + 5O2 = 3Co2 +4H2O
Explanation: Equations must be balanced
You must have the same amount of C
H and O on both sides of the equation
Given: glow is a find the indicated measure.
Answer:
is there supposed to be some type of image or ...
Explanation:
.......state Hess law
is benzene saturated or unsaturated?
Answer:
Benzene shows that it is actually unsaturated because it adds hydrogen or chlorine, although only when allowed to react under very vigorous conditions (higher temperature or pressure) compared to those required for alkenes and alkynes.
Explanation:
There is a certain chemical logic to the steps of the citric acid cycle. One particular functional group plays a large role in facilitating most of the chemistry that goes on in the reactions. This group is electron withdrawing, which helps to stabilize carbanion intermediates and increase the reactivity of the methyl group of acetyl CoA. What is this functional group
Answer:
Carbonyl Groups
Explanation:
Electron-withdrawing substituents stabilize the carbon atoms in its surrounding. These chemical groups are Carbonyl groups which withdraw electrons because of the inductive effect and presence of double bond between C and O and also because of the polarity of the two atoms (Carbon and oxygen)
Guided Notes: Types of Chemical Reactions:
1. Synthesis or Combination
A + B à AB
Example:
Magnesium + Oxygen gas à Magnesium Oxide
_________ + _______ à __________
2. Decomposition
AB à A + B
Example:
Calcium Oxide à Calcium + Oxygen
_______ à __________ + __________
3. Single Replacement
A + BX à AX + B
Example:
_________ + _______ à __________ + __________
4. Double Replacement
AX + BY à AY + BX
Example:
_________ + _______ à __________ + _________
5. Combustion
CxHyOz + O2 à CO2 + H2O
Example:
Propane + Oxygen à Carbon dioxide + water
_________ + _______ à __________ + _________
Classify the following chemical reactions:
Sodium and Chlorine gas à Sodium Chloride
_________ + _______ à __________ Type of Reaction: __________________
CaCO3 + HCl à CaCl2 + H2CO3 Type of Reaction: __________________
Al + ZnCl2 à AlCl3 + Zn Type of Reaction: __________________
Fe + O2 à Fe2O3 Type of Reaction: __________________
H2CO3 à CO2 + H2O Type of Reaction: __________________
Octane (C8H10) is burned in oxygen gas to produce
carbon dioxide and gaseous water
______ + _______ à _______ + ________ Type of Reaction: _________________
Answer:
the answer is like same we do last I know the answer I will help you to get more questionable and paste it to you do you know what time you do it me william and paste Now bro hurry up please and then let's go play with me again Go to bed ️ I don't know what to do patch right Now or just a question for you to get more questionable
Oxygen and ozone are allowed to come to equilibrium in the exothermic reaction 2O3(g) <--> 3O2(g) Which change will increase the numerical value of the equilibrium constant, K
Answer:
don't get the question2
i cant seem to figure out ANY of these... help when you can pls :.)
What happens when KCl is dissolved in water?
1.
KCI is the solute in a homogeneous mixture.
2.
KCl is the solute in a heterogeneous mixture.
3
KCI is the solvent in a homogeneous mixture.
4.
KCI is the solvent in a heterogeneous mixture.
Answer:
KCI is rhe solute in a homogeneous mixture
Answer:
1. KCI is the solute in a homogeneous mixture.
Explanation:
14. The illustration below shows two atoms of a fictitious element (M) forming a diatomic
molecule. What type of bonding occurs between these two atoms?
A. Covalent
B. Hydrogen
C. lonic
D. Polar
Covalent bonding involving covalent bonds is depicted between these two atoms as they form diatomic molecule.
What is a covalent bond?Covalent bond is defined as a type of bond which is formed by the mutual sharing of electrons to form electron pairs between the two atoms.These electron pairs are called as bonding pairs or shared pair of electrons.
Due to the sharing of valence electrons , the atoms are able to achieve a stable electronic configuration . Covalent bonding involves many types of interactions like σ bonding,π bonding ,metal-to-metal bonding ,etc.
Sigma bonds are the strongest covalent bonds while the pi bonds are weaker covalent bonds .Covalent bonds are affected by electronegativities of the atoms present in the molecules.Compounds having covalent bonds have lower melting points as compared to those with ionic bonds.
Learn more about covalent bond,here:
https://brainly.com/question/19382448
#SPJ2
Calculate the volume of solvent present in a 55.5%
by volume of 10.5 mL alcohol solution.
Answer:
I dont know
Explanation:
good luck
√625/1000
simplification
Answer:
[tex]\dfrac{1}{40}[/tex]
Explanation:
To find [tex]\dfrac{\sqrt{625}}{1000}[/tex], then we have to solve the square root "625".
A square root is regarded as a factor that occurred from a number, that is when such a number is being multiplied by itself, it gives the actual number.
SO;
[tex]\dfrac{\sqrt{625}}{1000} \\ \\ = \dfrac{25}{1000} \\ \\ = \dfrac{5}{200} \\ \\ \mathbf{= \dfrac{1}{40}}[/tex]
Calculate the [H+] in a solution that has a pH or 5.21
Answer:
[H⁺] = 6.17×10¯⁶ M
Explanation:
From the question given above, the following data were obtained:
pH = 5.21
Concentration of Hydrogen ion [H⁺] =?
The pH of a solution is defined by the following equation:
pH = –Log [H⁺]
With the above formula, we can obtain the concentration of Hydrogen ion [H⁺] in the solution as follow:
pH = –Log [H⁺]
5.21 = –Log [H⁺]
Divide both side by –1
–5.21 = Log [H⁺]
Take the antilog of –5.21
[H⁺] = Antilog (–5.21)
[H⁺] = 6.17×10¯⁶ M
Therefore, the concentration of Hydrogen ion [H⁺] in the solution is 6.17×10¯⁶ M
A saturated solution of sucrose in 500.0 mL of boiling water is cooled to 20.0 0C. What mass of rock candy will be formed?
Answer:
1280.5g
Explanation:
given mass of nitrogen is 0.12 dm^3 at 60°C and 1.01*10^5 Nm^2. Find its pressure at the same temperature if its volume is changed to 0.24 dm^3
50500Nm^2 or 5.05Nm^2
Explanation:
so bring out the parameters
p1= 0.12dm3, T1= 60c , because temperature is in kelvin add 273= 333k, v1= 0.12dm3 , T2= to the same value because the temperature didn't change = 333k, v2= 0.24dm3,P2= ?
general gas equation p1v1 over T1 = P2V2 over T2, when you input everything or make p2 the subject of the formula first you'll get the answer, pressure can have an s.i unit of mmhg but I'm using the same si unit as the question given and always check your units in the question to convert. please if this question has options please check, I don't want you to fail so verify from others if I made a mistake
Can someone please solve this question?? Is an element in group 3 likely to bond with an element from group 2?? Explain using the number of balance electrons from each element and the tot number of balance electrons needed to fill an about shell
Answer:
An atom with one or two valence electrons more than a closed shell The number of valence electrons of an element can be determined Groups 3-12 (transition metals), 2* (The 4s shell is complete and cannot hold any more electrons) in explaining the molecular structure of many organic compounds.
Explanation:
What quality is attributed to water due to “capillary action”?
A. change of liquid water into gaseous phase
B. the ability of water molecules to adhere to the surfaces of objects
C. high volatility
D. vapor pressure
Answer:
I think it's B. The ability of water molecules to adhere to the surfaces of objects
define functional group
Answer:
a functional group is a specific group of atoms or bonds within a compound that is responsible for the characteristic chemical reactions of that compound.
Explanation:
mark as brainliest!!
What is formed when a carboxylic acid and an amine combine? Give an example of the type of polymer that is formed by this reaction.
Answer:
The reaction between amines and carboxylic acids to form amides is biologically important. It is through this reaction that amino acids (molecules containing both amine and carboxylic acid substituents) link together in a polymer to form proteins.
When might a doctor prescribe
steroids?
What is the partial pressure (in atm) of CO₂ at 468.2 K in a 25.0 L fuel combustion vessel if it contains 60.0 grams CO₂, 82.1 g H₂O, and 7.30 mol vaporized, yet uncombusted fuel?
Answer:
2.09 atm
Explanation:
Step 1: Given and required data
Mass of CO₂ (m): 60.0 gVolume of the vessel (V): 25.0 LTemperature (T): 468.2 KWe won't need the data of water and uncombusted fuel, since the partial pressures are independent of each other.
Step 2: Calculate the number of moles (n) corresponding to 60.0 g of CO₂
The molar mass of CO₂ is 44.01 g/mol.
60.0 g × 1 mol/44.01 g = 1.36 mol
Step 3: Calculate the partial pressure of CO₂
We will use the ideal gas equation.
P × V = n × R × T
P = n × R × T/ V
P = 1.36 mol × (0.0821 atm.L/mol.K) × 468.2 K/ 25.0 L = 2.09 atm
The partial pressure of [tex]\rm CO_2[/tex] in 25 L fuel combustion vessel has been 2.09 atm.
From the ideal gas equation:
PV =nRT
P= partial pressure
V = volume = 25 L
n = moles of carbon dioxide
Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]
Moles of [tex]\rm CO_2[/tex] = [tex]\rm \dfrac{60}{44}[/tex] mol
Moles of [tex]\rm CO_2[/tex] = 1.36 mol
R = constant = 0.0821 atm.L/mol.K
T = temperature in Kelvin = 468.2 K
Partial pressure of [tex]\rm CO_2[/tex] = [tex]\rm \dfrac{1.36\;\times\0.0821\;\times\;468.2}{25}[/tex]
Partial pressure of [tex]\rm CO_2[/tex] = 2.09 atm.
The partial pressure of [tex]\rm CO_2[/tex] in 25 L fuel combustion vessel has been 2.09 atm.
For more information about partial pressure, refer to the link:
https://brainly.com/question/15075781
write half-reactions that show how H2O2 can act as either an oxidizing agent or a reducing agent, and describe where each of these situations occurred in your testing.
Answer:
H2O2 reduces itself to H2O and also oxidizes to O2 simultaneously thereby acting both as an oxidizing and reducing agent .
Explanation:
When
H2O2 acts as an oxidizing agent
H2O2 + 2e- 2H+---> 2H2O
Reducing agent
H2O2 --> O2 + 2e + 2H+
H2O2 reduces itself to H2O and also oxidizes to O2 simultaneously thereby acting both as an oxidizing and reducing agent .
Question 1
What term is used to describe atoms of the same element that have different masses?
O A) radioactive
B) constituents
C) telomers
OD) isotopes
E) None of the above
Answer:
Isotopes
Explanation:
iso means the same like in triangles (isosceles) so the atoms are the same element but different in mass. Since the isotopes have the same number of protons and electrons the isotopes have much the same chemical behavior. Since the isotopes have different numbers of neutrons the nuclear behavior differs.
Why is the regression equation not exactly y = 100 • 0.5n?
Answer:
Radioactive decay is a random event.
Explanation:
on edge
Answer:
Radioactive decay is a random event.
Explanation:
Edge 2020
Calculate mL (4 sf) of 0.7500 M sodium hydroxide required to neutralize 35.00 mL of 0.7500 M phosphoric acid. Please input number as whole number not scientific notation
Answer:
105mL of 0.7500M of NaOH are required
Explanation:
Phosphoric acid, H₃PO₄, reacts with sodium hydroxide, NaOH, as follows:
H₃PO₄ + 3 NaOH → Na₃PO₄ + 3H₂O
Where 1 mole of phosphoric acid reacts with 3 moles of NaOH
To solve this question we must find, as first, the moles of H3PO4 that react. Using the chemical equation we can find the moles of NaOH required to neutralize this acid. And, with its concentration, we can find the volume oof NaOH required:
Moles H3PO4:
35.00mL = 0.03500L * (0.7500mol / L) = 0.2625 moles H3PO4
Moles NaOH:
0.2625 moles H3PO4 * (3mol NaOH / 1mol H3PO4) = 0.07875 moles NaOH
Volume NaOH:
0.07875 moles NaOH * (1L / 0.7500mol) = 0.105L =
105mL of 0.7500M of NaOH are required