Instructions: Write the equation of the line in Slope-Intercept Form given the information below.
Thanks​

as you already know, to get the inverse of any expression we start off by doing a quick switcheroo on the variables and then solving for "y", let's do so for this inverse, since finding the inverse of the inverse, will give us the original function :)

[tex]f^{-1}(x)=-3x+2\implies y~~ = ~~-3x+2\hspace{5em}\stackrel{\textit{quick switcheroo}}{x~~ = ~~-3y+2} \\\\\\ x-2=-3y\implies \cfrac{x-2}{-3}=y\implies \cfrac{2-x}{3}=y=f(x)[/tex]

a) Any value outside of Q1 - 1.5(IQR) and Q3 + 1.5(IQR) can be considered a potential outlier.

b) This will give us a visual representation of the distribution of income among the full-time students.

c) It is important to analyze outliers carefully to ensure that they are not artificially skewing the results of our analysis.

(a) To check for outliers in the data set, we can use the box-and-whisker plot or the z-score method. However, since we do not have the exact data, we cannot use these methods. One way to identify potential outliers is to calculate the quartiles (Q1, Q2, and Q3) and the interquartile range (IQR).

(b) To draw a histogram of the data, we can use the frequency distribution table given in the question. The x-axis should represent the income ranges (e.g. $0-$100, $100-$200, etc.) and the y-axis should represent the frequency (i.e. the number of students who earned income within each range).

(c) If there are any outliers in the data set, we need to investigate them further to determine the reason for their unusual values. Possible reasons for outliers could be data entry errors, extreme values due to high- or low-income jobs, or unique situations such as unexpected windfalls or emergencies.

To learn more about frequency distribution visit;

https://brainly.com/question/14926605

#SPJ11

The coin makes approximately 16.53 turns when rolled on its edge for 1.34 m.

The circumference of the coin can be calculated as follows to determine the number of turns it makes:

C = πd

where C is the circumference, d is the diameter, and π is the mathematical constant pi (approximately equal to 3.14159).

So, for the given $2 coin with a diameter of 25.75 mm, the circumference is:

C = πd = 3.14159 x 25.75 mm ≈ 80.926 mm

Divide the distance traveled by the coin's circumference to determine the number of turns it makes when rolled on its edge for 1.34 meter:

Number of turns = distance traveled / circumference of the coin

Number of turns = 1.34 m / 0.080926 m

Number of turns ≈ 16.53

Therefore, the coin makes approximately 16.53 turns when rolled on its edge for 1.34 m.

know more about circumference visit :

https://brainly.com/question/28757341

#SPJ1

Answer:  the answer is A. 14.

Step-by-step explanation: In each trial of the reenactment, Scott chooses one card from the stack and records its digit. Based on the given data, a digit of or 1 speaks to a objective scored, and a digit of 2 through 9 speaks to a missed endeavor.

Out of the 5 endeavors per amusement, on the off chance that Scott scores precisely 2 objectives, it implies he missed 3 endeavors. Subsequently, the likelihood of this occasion can be calculated as:

P(exactly 2 objectives) = (0.2)²(0.8)³ = 0.008192

This likelihood can be utilized to discover the anticipated number of diversions in which Scott scores precisely 2 objectives, by duplicating it by the overall number of diversions reenacted:

Anticipated number of recreations = P(exactly 2 objectives) × Add up to number of recreations = 0.008192 × 84 ≈ 0.68

Adjusting to the closest entire number, we get that Scott is anticipated to score precisely 2 objectives in 1 diversion out of the 84 recreated diversions.

Point A = (5,4). If you rotated A 90 degrees about the point (2,-1), the coordinates of A' is (-1,2).

Rotation is the process of rotating an object or a point around a fixed point or axis. In mathematics, rotation refers to a transformation that preserves the size and shape of an object while changing its orientation. It is a basic geometric transformation that is used in various fields, including mathematics, physics, engineering, and computer graphics.

In a two-dimensional space, a rotation is typically described by an angle of rotation and a fixed point, which is known as the center of rotation. The angle of rotation represents the amount by which the object is rotated, while the center of rotation is the point around which the object is rotated. In a three-dimensional space, a rotation is described by an axis of rotation and an angle of rotation.

To rotate point A 90 degrees counterclockwise about the point (2,-1), we can use the following formula:

A' = (x', y') = (a + (x - a) cosθ - (y - b) sinθ, b + (x - a) sinθ + (y - b) cosθ)

where (a,b) is the center of rotation and θ is the angle of rotation (90 degrees in this case).

Substituting the given values, we get:

a = 2, b = -1, x = 5, y = 4, θ = 90 degrees

x' = 2 + (5 - 2) cos(90) - (4 + 1) sin(90) = 2 - 3 = -1

y' = -1 + (5 - 2) sin(90) + (4 + 1) cos(90) = -1 + 3 = 2

Therefore, the coordinates of A' are (-1, 2).

To know more about coordinates visit:

https://brainly.com/question/18596983

#SPJ9

Answer:

y=-1/12x+61/12

Step-by-step explanation:

y=-1/12x+61/12

Answer:

5x

6xy

2x3y

hope it's helpful

Answer:

50 meters/21.91 seconds = 2.282 m/sec

The Vieth-Müller Circle is an imaginary circle that passes between both retinae and the fixation point.

The Vieth-Müller Circle is an ophthalmology concept that depicts an imaginary circle that passes across the foveas (the primary points of the retinae that are responsible for acute, detailed vision) and the fixation point (the point at which the eyes are directed).

The Vieth-Müller Circle is significant because it helps to explain the phenomenon of binocular vision, which is the ability to perceive depth and three-dimensional space using both eyes together. The circle aids in the definition of the equivalent locations on the two retinae, which are sites that receive visual field information and are critical in combining the images from the two eyes into a single, three-dimensional perception.

To know more about retinae and fixation point, visit,

https://brainly.com/question/27123882

#SPJ4

The imaginary circle that passes through both retinae and the fixation point is called the horopter. The horopter is important in visual perception as it represents the set of points in space that stimulate corresponding points on each retina, which is necessary for binocular vision and depth perception.

The Horopter is an imaginary circle that passes through both retinae and the fixation point. In this context:

1. "Imaginary" refers to the fact that the Horopter is a theoretical concept rather than a physical object.
2. "Retinae" are the light-sensitive layers at the back of both eyes, which play a crucial role in processing visual information.
3. "Fixation" is the point where both eyes are focused on a single object in the visual field.

In brief, the Horopter represents a collection of points in the 3D space that are perceived as having the same depth or distance as the fixation point. It helps in understanding binocular vision and depth perception, as points on the Horopter contribute to forming a single, fused image from both eyes.

To learn more about depth perception : brainly.com/question/2372629

#SPJ11

Answer:√2/2

Step-by-step explanation:

Let's label the sides of the right triangle as follows:

The side adjacent to the angle θ (cosine is adjacent/hypotenuse): 6

The hypotenuse (the longest side): 6√2

The side opposite to the angle θ (sine is opposite/hypotenuse): 6√3

Using the Pythagorean theorem, we can find the length of the missing side:

a² + b² = c²

6² + (6√3)² = (6√2)²

36 + 108 = 72

144 = 72

√144 = √72

12 = 6√2

Now that we know the length of all three sides, we can use the cosine ratio to find the value of cos(θ):

cos(θ) = adjacent/hypotenuse = 6/6√2 = √2/2

Therefore, the value of cos(θ) in the right triangle with sides of 6, 6√2, and 6√3 is √2/2.

When the applet selects random samples from the town's population of babies, we assume that the population is large enough and diverse enough to accurately represent the characteristics and traits of the entire population.

We assume that the selection of the random samples is unbiased and that every member of the population has an equal chance of being selected for the sample.

Based on your question, we are discussing random samples taken from a town's population of babies this year. When selecting random samples from this population, we assume the following:

1. The population of babies is well-defined and includes all babies born in the town within the specified year.
2. The random samples are representative of the entire population, meaning that each baby has an equal chance of being selected in the sample.
3. The samples are independent, meaning that the selection of one baby does not influence the selection of another.

These assumptions ensure that the results obtained from the random samples can be generalized to the entire population of babies in the town for this year.

Learn more about random samples here:

https://brainly.com/question/15736806

#SPJ11

By assuming these conditions are met, we can perform statistical analyses on the random samples and make valid inferences about the entire population of babies in the town.

When an applet is selecting random samples from a town's population of babies this year, we typically assume the following about the population:
Independence:

Each baby selected in the sample is independent of the others, meaning that the outcome of one selection does not affect the outcome of another selection.
Randomness:

The applet chooses babies from the population in a random manner, ensuring that every baby has an equal chance of being selected.

Representativeness:

The random samples selected are representative of the entire population, meaning that the samples accurately reflect the characteristics of the town's population of babies as a whole.

For similar question on conditions.

https://brainly.com/question/28532738

#SPJ11

The value of x after executing the last statement is still 10.

After executing the last statement, the value of x is still 10. The snippet of code declares an integer variable x and a pointer variable y that points to the address of x. Then, y is incremented by 1 (which means it now points to the next memory location after x). Finally, the value 100 is assigned to the memory location pointed to by y, which is actually beyond the memory allocated for variable x. This can lead to unexpected behavior, but since the value of x is never modified directly, its value remains unchanged at 10.

Learn more about snippet of code here: brainly.com/question/28650328

#SPJ11

The bigger engine is larger than the smaller one by 235.4724 cubic centimeters.

We know that 1 inch=2.54 centimeters

Then 1 cubic inches-(2.54)^3 cubic centimeters

We have that:

⇒ 1 cubic inches=(2.54)3 = 16.3870 cubic centimeters

⇒350 cubic inches= 350 x 16.3870 = 5735.4724 cubic centimeters

Since, the other displaces 5,500 cubic centimeters  and 5735.4724< 5500. The difference between them is:

= 5735.4724 - 5500

= 235.4724

Hence, the bigger engine larger than the smaller one by 235.4724 cubic centimeters.

Read more about Engine size

brainly.com/question/14439953

#SPJ1

The score to be made on the 4th quiz in order to have a mean quiz score of exactly 90 is equal to 88.

Let us consider the score that Tim needs to get on his fourth quiz be x.

Score he needs to get in order to have a mean quiz score of 90,

Set up an equation using the formula for the mean ,

(mean score) = (sum of scores) / (number of scores)

If Tim wants his mean quiz score to be 90, then we have,

⇒ 90 = (86 + 92 + 94 + x) / 4

Multiplying both sides by 4, we get,

⇒360 = 86 + 92 + 94 + x

Simplifying this equation, we get,

⇒ x = 360 - 272

⇒ x = 88

Therefore, Tim needs to get a score of 88 on his fourth quiz in order to have a mean quiz score of exactly 90.

Learn more about score here

brainly.com/question/31177688

#SPJ4

The theoretical probability of the spinner not landing on red is 0.875.

The total number of sections on the spinner is 8, out of which only one section is red. Therefore, the probability of the spinner landing on red is:

P(Red) = 1/8

The probability of the spinner not landing on red would be the probability of landing on any other section, which is:

P(Not Red) = 1 - P(Red) = 1 - 1/8 = 7/8

Therefore, the theoretical probability of the spinner not landing on red is 7/8 or 0.875 in decimal form.

So, the correct answer is: 0.875.

Learn more about probability at https://brainly.com/question/24756209

#SPJ1

Answer:

D

Step-by-step explanation:

Answer:

The amplitude is 1/2, the period is 2π/4 = π/2, and the phase shift is π/2.

Step-by-step explanation:

The given function is:

f(t) = -1/2(4t - 2π)

We can rewrite this function in the form:

f(t) = A cos(B(t - C)) + D

where A is the amplitude, B is the period, C is the phase shift, and D is the vertical shift.

Comparing this with the given function, we can see that:

A = 1/2

B = 4

C = π/2

D = 0

Therefore, the amplitude is 1/2, the period is 2π/4 = π/2, and the phase shift is π/2.

Note that the negative sign in front of the function does not affect the amplitude, period, or phase shift. It simply reflects the function across the x-axis.

"It can vary - it really depends on the distribution of the variable."

The number of intervals, or bins, to choose when creating a histogram can vary depending on the distribution of the variable.

Most often, about 8-10 intervals are used, but there is no set rule. It is generally recommended to have at least 5 intervals, but if the data is highly skewed or has outliers, more intervals may be needed to accurately represent the distribution.

Ultimately, the goal is to choose a number of intervals that provides a clear visual representation of the data without oversimplifying or overcomplicating the histogram.

The number of intervals or bins to be chosen when creating a histogram can vary and it really depends on the distribution of the variable.

While most often, about 8-10 bins are used, there is no hard and fast rule for the number of bins to be used in a histogram.

In general, the number of bins should be large enough to display the shape of the distribution clearly, but not so large that it obscures important features of the distribution or leads to overfitting.

A minimum of 5 bins is recommended to display the basic shape of the distribution, but more bins may be necessary for complex or multi-modal distributions.

Depending on the distribution of the variable, a histogram's number of intervals or bins can be altered.

There is no established guideline, however 8–10 intervals are typically utilized.

A minimum of five intervals are often advised, however if the data is extremely skewed or contains outliers, more intervals could be required to correctly depict the distribution.

For similar questions on variable.

https://brainly.com/question/27894163

#SPJ11

Thus, the total surface area of cylinder is found to be 480π sq. cm.

A cylinder's surface area is made up of its two congruent, parallel circular sides added together with its curved surface area. You must determine the Base Area (B) and Curved Surface Area in order to determine the surface area of a cylinder (CSA).

As a result, the base area multiplied by two and the area of a curved surface add up to the surface area or total surface of a cylinder.

Given data:

radius r = 8 cm

Height h = 22 cm

Total surface area of cylinder = 2*area of circle + area of curved cylinder

TSA = 2πr² + 2πrh

TSA = 2π(8)² + 2π(8)(22)

TSA = 2π(64) + 2π(176)

TSA = 128π + 352π

TSA = 480π sq. cm.

Thus, the total surface area of cylinder is found to be 480π sq. cm.

Know more about the surface area of cylinder:

https://brainly.com/question/27440983

#SPJ1

Complete question-

Find the surface area of the cylinder with radius of 8 cm and height of 22 cm. write the answer in terms of pi and round the answer to the nearest hundredths place.

The estimated regression equation for the given data is y = -30.7 + 3.409x

To develop an estimated regression equation for the given data, we need to use the method of least squares.

The formula for the slope of the regression line is given by:

b = ∑(xi - x)(yi - y) / ∑(xi - x)²

where xi and yi are the individual values of the two variables, x and y are their respective means.

The formula for the intercept of the regression line is given by:

a = y - b × x

where a is the intercept and b is the slope.

Using the given data, we can calculate the values of x, y, b, and a as follows

x = (6 + 11 + 15 + 18 + 20) / 5 = 14

y = (7 + 9 + 12 + 21 + 30) / 5 = 15.8

∑(xi - x)(yi - y) = (6 - 14)(7 - 15.8) + (11 - 14)(9 - 15.8) + (15 - 14)(12 - 15.8) + (18 - 14)(21 - 15.8) + (20 - 14)(30 - 15.8) = 306.8

∑(xi - x)² = (6 - 14)² + (11 - 14)² + (15 - 14)² + (18 - 14)² + (20 - 14)² = 90

b = ∑(xi - x)(yi - y) / ∑(xi - x)² = 306.8 / 90 = 3.409

a = y - b × x = 15.8 - 3.409 × 14 = -30.7

Learn more about regression equation here

brainly.com/question/14184702

#SPJ4

The given question is incomplete, the complete question is:

Given are data for two variables, x and y. Develop an estimated regression equation for these data.

Answer:

$481

Step-by-step explanation:

37×$17=$481

he made $481

For all given Quadrilaterals none has enough information provided in the problem to definitively say - if they are a parallelogram.Hence, option E is correct for all.

If a quadrilateral is a parallelogram, it satisfies the following properties:

It is important to note that in order to definitively conclude that a quadrilateral is a parallelogram, all four properties must be satisfied. If only one or some of the properties are met, it does not necessarily guarantee that the quadrilateral is a parallelogram.

Figure 1-: Adjacent angles are 105 and 75 degrees, which satify the condition of opposite angles being equal but except this no other information is provided, Hence, we don't have enough information to say figure 1 is a parallelogram.

Figure 2-: Diagonals bisect each other and make angle 65 degree with each other. Given that Diagonal 1 bisects Diagonal 2 and the opposite sides of the quadrilateral are equal, by using SAS criterion, the congruency of triangles formed by the diagonals can be derived to say that the opposite angles of the quadrilateral are also equal . However, we still need more information about parallelism of sides to definitively say given quadrilateral is a parallelogram.

Figure 3-: One pair of opposite side is equal in length ,while other pair of line is parallel to each other.This information is insufficient to determine if given quadrilateral is a parallelogram.

Learn more about parallelogram here:

https://brainly.com/question/29147156

#SPJ1

Step-by-step explanation:

18-2x<3(2x-1)-3

21-2x<6x-3

24<8x

3<x

Interval notation

(3, ∞)

The profit (p) is $7500 generated by selling 1500 units of a certain commodity is given by the function p ( x ) = - 1500 + 12 x - 0.004 x²

To maximize our profit, we must locate the vertex of the parabola represented by this function. The x-value of the vertex indicates the number of units that must be sold to maximize profit.

We may use the formula for the x-coordinate of a parabola's vertex:

x = -b/2a

where a and b represent the coefficients of the quadratic function ax² + bx + c. In this situation, a = -0.004 and b = 12, resulting in:

x = -12 / 2(-0.004) = 1500

This indicates that when 1,500 units are sold, the profit is maximized.

To calculate the greatest profit, enter x = 1500 into the profit function:

P(1500) = -1500 + 12(1500) - 0.004(1500)^2

P(1500) = -1500 + 18000 - 9000

P(1500) = $7500

Therefore, the maximum possible profit is $7,500 and it is generated when 1,500 units are sold.

Learn more about Profit maximization:

https://brainly.com/question/30436087

#SPJ4

To achieve this maximum profit, exactly 1500 units must be sold.

To find the maximum profit and the number of units needed to generate it, we can use the given profit function p(x) = -1500 + 12x - 0.004x^2. We need to find the vertex of the parabola represented by this quadratic function, as the vertex will give us the maximum profit and the corresponding number of units.

Step 1: Identify the coefficients a, b, and c in the quadratic function.
In p(x) = -1500 + 12x - 0.004x^2, the coefficients are:
a = -0.004
b = 12
c = -1500

Step 2: Find the x-coordinate of the vertex using the formula x = -b / (2a).
x = -12 / (2 * -0.004) = -12 / -0.008 = 1500

Step 3: Find the maximum profit by substituting the x-coordinate into the profit function p(x).
p(1500) = -1500 + 12 * 1500 - 0.004 * 1500^2
p(1500) = -1500 + 18000 - 0.004 * 2250000
p(1500) = -1500 + 18000 - 9000
p(1500) = 7500

So, the maximum profit is $7,500, and 1,500 units must be sold to generate it.

To learn more about parabola: brainly.com/question/8227487

#SPJ11

Sampled 200 delinquent credit card accounts instead of 100, the margin of error would decrease.

Sampled 200 delinquent credit card accounts, the margin of error for the sample mean at a 95% confidence level would be $80.164.

Smaller than the margin of error we found earlier for a sample size of 100.

The margin of error for the sample means at a 95% confidence level, we need to use the formula:
[tex]Margin of error = z\times (standard deviation / square root of sample size)[/tex]
[tex]z\times[/tex] is the z-score for the 95% confidence level, which is 1.96.
So, plugging in the given values, we get:
[tex]Margin of error = 1.96 \times  (578 / \sqrt 100)[/tex]
[tex]Margin of error = 1.96 \times 57.8[/tex]
Margin of error = 113.008
Therefore, the margin of error for the sample mean at a 95% confidence level is $113.008.
Repeated samples of 100 delinquent credit card accounts and computed the sample mean each time, we would expect the true population mean to be within $113.008 of our sample mean about 95% of the time.
The margin of error is inversely proportional to the square root of the sample size. So, as the sample size increases, the margin of error decreases.
To see this, let's plug in the new sample size into the margin of error formula:
[tex]Margin of error = 1.96 \times (578 / \sqrt 200)[/tex]
[tex]Margin of error = 1.96 \times 40.9[/tex]
Margin of error = 80.164

For similar questions on Margin

https://brainly.com/question/30404882

#SPJ11

Step-by-step explanation:

rotate the triangle in your mind (or as actual picture on your phone or computer), so that the right angle is the bottom right or bottom left, and C being the opposite bottom angle.

then we see

28 = cos(C) × 35

21 = sin(C) × 35

and so,

sin(C) = 21/35 = 3/5

cos(C) = 28/35 = 4/5

tan(C) = sin(C)/cos(C) = 3/5 / 4/5 = 3/4

Answer:

The correct answer is:

10√2

Explanation:

In a right triangle, the hypotenuse is the side opposite the right angle and is also the longest side. The other two sides are called the legs.

In this problem, the hypotenuse of the resulting triangles is given as 20 inches. Since the quilt squares are cut on the diagonal to form triangular quilt pieces, the hypotenuse of each triangle is formed by the diagonal cut of a square.

Let's denote the side length of each square as "s" inches.

According to the Pythagorean Theorem, which relates the sides of a right triangle, the square of the length of the hypotenuse is equal to the sum of the squares of the lengths of the two legs.

In this case, the hypotenuse is 20 inches, so we have:

20^2 = s^2 + s^2 (since the two legs of the right triangle are the sides of the square)

400 = 2s^2

Dividing both sides by 2, we get:

200 = s^2

Taking the square root of both sides, we get:

s = √200

Since we are looking for the side length of each piece in simplified radical form, we can further simplify √200 as follows:

√200 = √(100 x 2) = 10√2

So, the side length of each quilt piece is 10√

The side length of each piece of the triangular pieces of quilt cut from squares will be 10√2 inches.

This is a simple mathematics problem that can be solved using the Pythagoras theorem. This theorem states that in a right-angled triangle, the square root of the sum of the two perpendicular sides (p,b) is equal to the longest side, called the hypotenuse (h).

[tex]h = \sqrt{p^2 + b^2}[/tex]

Since the triangle pieces have been cut from a square, they will be right-angled triangles, and the two perpendicular sides will be equal, i.e., p = b.

20 = √2p²  (since p and b are equal, b can be taken as p)

On squaring both sides,

400 = 2p²

p² = 400/2

p² = 200

p = √200

p = 10√2 = b

To know more about Pythagoras theorem,

https://brainly.com/question/28981380

Recall the equation provided in the pdf:

   (125x ^ 3 * y ^ - 12) ^ (- 2/3) = (y ^ [A])/([B] * x ^ [c])

find A B and C.

The answer will be:

We can solve this problem using the rules of exponents and algebraic manipulation.

Starting with the left-hand side of the equation:

(125x^3 * y^-12)^(-2/3)

Using the rule that (a * b)^c = a^c * b^c, we can rewrite the expression as:

125^(-2/3) * x^(-2) * y^(8)

Simplifying further, we can use the fact that a^(-n) = 1/(a^n) to get:

1/(5^2 * x^2 * y^8/3)

Now, we can see that the denominator on the right-hand side of the equation must be 5^2 * x^2 * y^8/3. To find the numerator, we need to simplify the expression y^A. Comparing exponents, we see that:

y^A = y^(8/3)

Therefore, we need to find a value of A such that A = 8/3. Solving for A, we get:

A = 8/3

Now, we can write the equation as:

y^(8/3)/(5^2 * x^2 * y^8/3) = y^(8/3)/(25 * x^2 * y^(8/3))

Comparing exponents again, we see that we need to find values of B and C such that:

B * C = 2

and

-8/3 = -C

Solving for C, we get:

C = 8/3

Substituting this value of C into the first equation, we get:

B * 8/3 = 2

Solving for B, we get:

B = 3/4

Therefore, the solution is:

A = 8/3

B = 3/4

C = 8/3

Learn more about exponential algebra here:

https://brainly.com/question/12940982

#SPJ1

Answer:

To find the values of f(g(x)) for the given values of x, we need to first evaluate g(x) for each value of x, and then plug the result into f(x).

Using the given functions:

g(x) = 2x - 5

f(x) = √(x+1)

Therefore, we have:

f(g(x)) = √(g(x) + 1) = √(2x - 5 + 1) = √(2x - 4) = 2√(x - 2)

So, we can complete the table as follows:

x f(g(x))

4 2

10 4

20 6

34 8

52 10

Therefore, the completed table is:

x f(g(x))

4 2

10 4

20 6

34 8

52 10

The correct answer is option B. Translate 1 to the left, scale vertically by 1/2, then reflect over the y-axis.

The process of modifying the shape, location, or features of a graph is often referred to as graph transformation. Graphs are visual representations of mathematical functions or data point connections, often represented on a coordinate plane.

Translations, reflections, rotations, dilations, and other changes to the look of a graph are examples of graph transformations.

For the given problem, Transformation to get the desired result can be carried out as:

Hence, to convert the graph of "y = k(x)" to the graph of "y = -k(x + 1)," the correct sequence of transformations is to translate 1 unit to the left, scale vertically by 1/2, and then reflect across the y-axis, which is option B.

Learn more about Graph Transformation here:

https://brainly.com/question/10059147

#SPJ1