If you were in a pool or ocean, what could you say about the amount of energy in a wave and the amptitude
Answer:
The amount of energy in a wave and the amplitude depends on the force applied.
Explanation:
The amount of energy in a wave is directly related to the amplitude means if the the amount of energy in a wave increases, the amplitude of that wave also increases whereas if the the amount of energy in a wave decreases the amplitude of the wave also decreases. If you jump into the pool from a higher elevation, increase occur in the amount of energy in a wave and also higher the amplitude while on the other hand, slower movement in the pool leads to smaller wave energy and lower amplitude.
Two boxes are connected by a string. The first box has a mass of 4.2 kg and the
second 2.8 kg. A string attached to the first box pulls horizontally with a force of
7.5 N. Calculate the tension in the second string if the force of friction on the first
box is 2.0 N and the force of friction on the second is 1.6 N.
Answer:
........
Explanation:
A ball rolled 12.0 m [E] in 10.0 s, hit an obstacle, and rolled straight back. After the collision, the ball rolled 8.00 m [W] in 6.00 s. What was the average velocity of the ball?
Answer:
the average velocity of the ball is 5 m/s.
Explanation:
Given;
initial position of the ball, x₁ = 12 m East
final position of the ball, x₂ = 8 m West
initial time of motion, t₁ = 10.0 s
final time of motion, t₂ = 6.0 s
The average velocity is calculated as follows;
[tex]v = \frac{\Delta x}{\Delta t} = \frac{x_1 \ - \ x_2}{t_1 \ - \ t_2}[/tex]
let the Eastward direction be positive
Let the westward direction be negative
[tex]\frac{x_1 \ - \ x_2}{t_1 \ - \ t_2} = \frac{12 \ - \ (-8)}{10 -6}= \frac{20}{4} = 5 \ m/s[/tex]
Therefore, the average velocity of the ball is 5 m/s.
What is the current measured by ammeter 4?
Answer:
I dont know
Explanation:I dont know either
I've got a test tomorrow morning help!
A 100.0 W incandescent light bulb emits about 1.6 J of energy as useful, visible light each second. What is its efficiency?
Answer:
The efficiency is just 0.016
Explanation:
The efficiency is given by the useful energy ÷ by the total energy.
1 W is the same that 1 joule per second
If you do the math:
1.6/100=0.016
A hunter stood at about 60 m away from a tree. He used the bow to release the arrow in order to shoot a coconut held by a monkey in the tree. The coconut was at a height of 25 m from the ground. The hunter aimed directly at the coconut and the arrow left the bow at 45 m/s making an angle of 20 degree to the horizontal. At the moment thebhunter released the arrow, the monkey dropped the coconut such that it falls vertically from rest. Neglect air resistance and the arrow's size. What is the time taken for the arrow to hit the coconut?
Answer:
[tex]v = u + at (upward)\\ 0 = 45 \sin(20) - 9.81t \\ t = 1.56s[/tex]
How can you describe the path of the projectile motion?
Projectile motion is a motion where an object moves in a bilaterally symmetrical path
What is a Projectile motion ?Projectile motion is a form of motion experienced by an object or particle that is projected near Earth's surface and moves along a curved path under the action of gravity only.
If an object is thrown up by making a certain angle with respect to ground ( let say theta) up in the sky , it will reach a maximum height after which it follows a symmetrical path as it comes down due to the action of gravity . The path followed from the beginning till end will be a parabolic in this case .
It is a motion where an object moves in a bilaterally symmetrical path .
Projectile motion only occurs when there is only one force applied at the beginning of the trajectory, after been released object comes in the action of gravity .
General form of equation of trajectory of Projectile motion can be written as :
y = x tan(theta ) - g(x^2)/(2(u^2)cos^2(theta))
where y = horizontal component
x = vertical component
g = gravity
u = initial velocity
theta = angle of inclination of the initial velocity from horizontal axis
learn more about Projectile motion :
https://brainly.com/question/11049671?referrer=searchResults
#SPJ3
Look at the following chemical equation.
4Al + 3O2 → 2Al2O3
What is true about this chemical equation?
A
It is balanced because the mass of the reactants is equal to the mass of the products.
B
It is balanced because the number of reactants is equal to the number of products.
C
It is unbalanced because the mass of the reactants is greater than the mass of the products.
D
It is unbalanced because the number of reactants is greater than the number of products.
Answer:
it would be c
Explanation:
its the only one that makes sence
PLS HELP! I’ll give Brainly!
What source of energy drives the water cycle?*
1 Earth's rotation
2 Earth's gravity
3 Circulation of ocean waves
4 The Sun
needs to go—energy, or heat.
please follow me mark me as brainlist
Answer:
4
Explanation:
water cycle is driven primarily by the energy from the sun
Argon, atomic number 18, has an atomic weight of 39.9. Potassium, atomic number 19, has an atomic weight of 39.1. Which of these statements best explains why potassium has a lower atomic weight than argon?
A.
Potassium is reactive, while argon is typically inert.
B.
Potassium atoms lose electrons more easily than argon atoms.
C.
Potassium is typically a solid, while argon is typically a gas.
D.
Potassium atoms usually have fewer neutrons than argon atoms.
Answer: D
Explanation:
Atomic weight is measured by adding the number of protons and neutrons in an atom's nucleus. Argon's atomic number is 18 while potassium's is 19. This means that Argon will always have 18 protons while potassium will always have 19 protons.
To make the numbers easier to work with, round each atomic weight. We'll say the atomic weight of potassium is 39 and the atomic weight of argon is 40. To see how many neutrons each one has, I can set up a simple equation for each using the following equation:
Atomic weight = protons + neutrons
Potassium:
39 = 19 + N --> N = 20
Argon:
40 = 18 + N --> N = 22
An atom is defined by the number of protons it has, but the number of neutrons can vary. We call these isotopes, or atoms with the same number of protons but a different number of neutrons. As the math shows, argon typically has more neutrons per atom than potassium does.
Tall buildings have lightning rods to protect them from lightning strikes. Explain wy the rods rare pointed in shape and taller than the buildings.
Answer:
the rods are pointed so it can absurb the energy from the lighting and taller than the building so it hits the rod first instead of the building
Explanation:
hope this helps
∞∞∞∞∞∞∞∞∞∞
A 56.0 kg diver strikes the water at a speed of 13.9 m/s, then slows to a stop underwater in 0.65 s What is the momentum of the diver as she strikes the water?
Answer:
the momentum of the diver is 778.4 m/s.
Explanation:
Given;
mass of the diver, m = 56 kg
speed at which the diver strikes the water, v = 13.9 m/s
duration of the motion, t = 0.65 s
The momentum of the diver is calculated as follows;
P = mv
P = 56 x 13.9
P = 778.4 m/s
Therefore, the momentum of the diver is 778.4 m/s.
According to the cell theory where do cells come from?
Answer:
Cells come from other pre-existing cells
Explanation:
Answer:
Cell discovery and cell theory
Matthias Schleiden and Theodor Schwann conclude that all living organisms are made of cells, and that cells can be produced from other cells. Rudolf Virchow confirms that all cells must come from pre-existing cells.
Explanation:
i looked it up
Which of the following is a disadvantage of a parallel circuit? A. Parallel circuits are a complex circuit and use more wire. B. If one bulb goes out the others go out too. C. Each of the bulbs burn at a different level of brightness.
In a concave mirror, if the object is located beyond the center of curvature the image formed is real, inverted, and smaller than the object. but, if the object is located between the center of curvature and the focal point, the image is real, inverted, and ____ Than the object
A) Also smaller
B) Lager
C) The same size
D) Disappears
The tools to distinguish the thickness of two objects of thickness of 1.92mm and the other with thickness of 1.93mm is ?
Answer:
the instrument that gives this precision is the micrometer screw
Explanation:
The high precision measurements of small parts are the general vernier and the micrometer screw.
In these two instruments the same principle is used: there is a fixed rule and a mobile one that increases precision.
Let's analyze the absolute error or precision of each instrument
* For the vernier, the precision of the fixed rule is 1 mm and there are 20 divisions (the most common); therefore the precision of the instrument is
Δx = 1 mm / 20
Δx = 0.05 mm
* For the micrometer screw, the precision of the fida rule is 0.5 mm and the number of divisions is 50, therefore the precision of the screw is
Δx = 0.5mm / 50
Δx = 0.01 mm
consequently the instrument that gives this precision is the micrometer screw
17. ____ Objects with more mass have
a. more gravity b. less gravity
c. more acceleration
d. less inerties
a. more gravity
This is the answer.
Two disks are rotating about the same axis Disk A has a moment of inertia of 3.44 kg m2 and an angular velocity of 5.69 rad s Disk B is rotating with an angular velocity of 7.03 rad s The two disks are then linked together without the aid of any external torques so that they rotate as a single unit with an angular velocity of 4.23 rad s The axis of rotation for this unit is the same as that for the separate disks What is the moment of inertia of disk B
Answer:
The moment of inertia of disk B is 0.446 kilogram-square meters.
Explanation:
In this case, the moment of inertia of the disk B can be determined by means of the Principle of Conservation of Angular Momentum, whose model is:
[tex]I_{A}\cdot \omega_{A} + I_{B}\cdot \omega_{B} = (I_{A} + I_{B})\cdot \omega[/tex] (1)
Where:
[tex]I_{A}[/tex], [tex]I_{B}[/tex] - Moments of inertia of disks A and B, in kilogram-square meters.
[tex]\omega_{A}[/tex], [tex]\omega_{B}[/tex] - Initial angular velocities of disks A and B, in radians per second.
[tex]\omega[/tex] - Final angular velocity of the resulting system, in radians per second.
Let suppose that disk A rotates counterclockwise, whereas disk B rotates clockwise and that resulting system rotates counterclockwise. If we know that [tex]I_{A} = 3.44\,kg\cdot m^{2}[/tex], [tex]\omega_{A} = 5.69\,\frac{rad}{s}[/tex], [tex]\omega_{B} = -7.03\,\frac{rad}{s}[/tex] and [tex]\omega = 4.23\,\frac{rad}{s}[/tex], then the moment of inertia of the disk B is:
[tex]I_{A} \cdot (\omega_{A} - \omega) = I_{B}\cdot (\omega - \omega_{B})[/tex]
[tex]I_{B} = I_{A}\cdot \left(\frac{\omega_{A}-\omega}{\omega - \omega_{B}} \right)[/tex]
[tex]I_{B} = (3.44\,kg\cdot m^{2})\cdot \left(\frac{5.69\,\frac{rad}{s} - 4.23\,\frac{rad}{s} }{4.23\,\frac{rad}{s} + 7.03\,\frac{rad}{s} } \right)[/tex]
[tex]I_{B} = 0.446\,kg\cdot m^{2}[/tex]
The moment of inertia of disk B is 0.446 kilogram-square meters.
what types of properties does light have?
Answer:
The primary properties of visible light are intensity, propagation-direction, frequency or wavelength spectrum and polarization.
An acceleration of +3.5 m/s² results when two forces act on an object. The first
force is 100 N to the right and the second force is 40 N to the right. (A) What is
the net force on the object? (B) What is the object's mass?
Answer:
Explanation:
Since the forces oppose each other (direction), the smaller is subtracted from the larger. The net force is
Fn = 100 - 40 = 60
Part B
Fn = m * a
a = 3.5 m/s^2
Fn = 60
60 = m * a
60 = m * 3.5 Divide by 3.5
60/3.5 = m
m = 17.143
describe the energy changes in mass-spring system that is oscilating horizontally.
Answer:
Explanation:
l etme y lo saoc apr aotarsy r dealkten dpo
A ball is initially moving with a velocity 0.5m/s. Its velocity decreases at a rate of 0.05m/s^2. How much time will it take to stop? How much distance will the ball travel before it stops
Answer: t = 10 s , s = 2,5 m
Explanation: (1) Speed v = v0 + at and (2) distance s = v0t + ½at².
Now v0 = 0.5 m/s , v = 0 and a = -0.05 m/s²
Solve from equation (1) t = -v0 / a = - 0.5 m/s / -0.05 m/s² = 10 s
Add t = 10 s to equation (2 ) s = 0.5 m/s · 10 s + 0.5· (-0.05 m/s²)· (10 s)²
= 5 m - 2,5 m = 2,5 m
What is/are the products in the chemical equation?
Answer:NH3
Explanation: product s are the result of the equation
[tex]\huge{ \mathfrak{ \underline{ Answer }}}࿐[/tex]
The balanced Chemical equation for above reaction is :
[tex] \mathrm{N_2 + 3H_2 \rightarrow 2NH_3}[/tex]
The product formed here is [tex]NH_3[/tex] (Ammonia)
[tex] \\ \\ \\ \\ \\ \\ [/tex]
[tex] \#TeeNForeveR[/tex]
Which wave type does interference affect more?
digital
analog
Answer:
interference affects analog more
Explanation:
Two boulders have masses of 7.5 x 106 kg and 9.2 x 105 kg. After rolling apart, their centers are separated by a distance of 124 m. Find the gravitational attraction FG between them.
Answer:
0.0299 N
Explanation:
Applying,
F = Gmm'/r²................... Equation 1
Where F = gravitational force between the boulders, m = mass of the first boulder, m' = mass of the second boulder, r = distance between the boulders, G = Universal constant.
From the question,
Given: m = 7.5×10⁶ kg, m' = 9.2×10⁵ kg, r = 124 m
Constant: G = 6.67×10⁻¹¹ Nm²/kg²
Substitute these values into equation 1
F = (6.67×10⁻¹¹× 7.5×10⁶ × 9.2×10⁵ )/124²
F = (460.23)/15376
F = 0.0299 N
Answer:
0.3 N
Explanation:
Plug in all your variables:
6.67 ⋅ 10^-11 (7.5 ⋅ 10^6) (9.2 ⋅ 10^5)
--------------------------------
(124)^2
Once you plugin, You start to multiple solving to solve your problem:
460.23
---------- = 0.02993171 N
15376
Now Simplify:
Answer = 0.03 N
A bmw 23 goes from 0 to 60 miles per hour in 5 seconds . It is also used in the second law of motion
Answer:
Acceleration = 5.3645 m/s²
Explanation:
Given the following data;
Initial velocity, u = 0mph
Final velocity, v = 60 mph
Time, t = 5 seconds
To find the acceleration (also used in the second law of motion), we would use the following formula;
A = (v - u)/t
Conversion:
Miles per hour to meters per seconds;
0 mph = 0 mps
1 mph = 0.44704 mps
60 mph = 60 * 0.44704 = 26.8224 mps
Next, we find the acceleration;
Acceleration = (26.8224 - 0)/5
Acceleration = 26.8224/5
Acceleration = 5.3645 m/s²
Suppose the mass of a fully loaded module in which astronauts take off from the Moon is 2000 kg. The thrust of its engines is 8600 N. Calculate its acceleration in a vertical takeoff from the Moon.
Answer:
The acceleration during the take-off from the moon is 4.3 m/s²
Explanation:
Given;
the mass of the fully-loaded module, m = 2000 kg
The thrust of its engines, F = 8600 N
Apply Newton's second law of motion to determine the acceleration during the take-off from the moon;
F = ma
where;
a is the acceleration
a = F / m
a = 8600/2000
a = 4.3 m/s²
Therefore, the acceleration during the take-off from the moon is 4.3 m/s²
A woman on a 10-speed bicycle travels at 9m/s relative to the ground as she passes a little boy on a tricycle going in the opposite direction. If the boy is travelling at 1m/s relative to the ground , how fast does the boy appear to be moving relative to the woman
Answer:
23
Explanation:
Elements : Atoms :: Covalent compounds:____
Answer:
Hcl
Explanation:
Hydrogen and chlorine charge electrons and are non metals while compounds with metals are ionic
Calculate the energy transfered when 3 of copper is heated from 20°C to 220°C
Answer:
Q = 231.6 J
Explanation:
Given that,
Mass, m = 3 g
The temperature rises from 20°C to 220°C.
We know that, the specific heat of copper is, c = 0.386 J/g K
We know that the energy transferred in heating of copper is given by :
[tex]Q=mc\Delta T\\\\Q=3\times 0.386\times (220-20)\\\\Q=231.6\ J[/tex]
So, the required energy is equal to 231.6 J.