Organizations identify and document workplace performance goals through various methods such as setting specific, measurable, achievable, relevant, and time-bound (SMART) goals, etc.
How organizations identify and document workplace performance?
Organizations identify and document workplace performance goals using a variety of techniques, including setting specific, measurable, achievable, relevant, and time-bound (SMART) goals, conducting performance evaluations and appraisals, and developing job descriptions with clear expectations.
To monitor progress towards these goals, organizations use a variety of tools and techniques such as setting up regular check-ins and progress reviews, utilizing performance management software, creating accountability systems and regular performance metrics, and providing feedback and coaching to employees.
In summary, organizations identify and document workplace performance goals by setting SMART goals, conducting performance evaluations and creating job descriptions, and monitor progress towards these goals by utilizing performance management software, setting up regular check-ins and progress reviews, creating accountability systems, and providing feedback and coaching to employees.
To learn more about performance management software, visit: https://brainly.com/question/29095819
#SPJ1
fill in the blank. paula is putting together a balance worksheet and just finished computing the adjusted trial balance section of the worksheet and checked to make sure everything is in balance. just prior to completing the adjusted trial balance, paula prepared the___section. after she finishes the adjusted trial balance, she will complete the___section of the worksheet.
The general ledger accounts' closing balances are necessary to produce a trial balance. All financial transactions are entered into the journals and the ledger statements are used to compile the trial balance.
How Does a Trial Balance Work?The trial balance is a list of all debits and credits in an account book with double entry.The general ledger and the trial balance should be kept in good order since each transaction is recorded to guarantee that the debits and credits are equal. A mistake has occurred and needs to be found if the total of the debits and credits is not equal.A trial balance is frequently prepared by businesses, typically at the conclusion of the reporting period, to confirm that the entries in the books of accounts are accurate mathematically.Furthermore, it is crucial to understand that just because the trial balance is deemed to be in balance does not imply that there aren't any accounting mistakes. It's possible, for instance, that the accountant misclassified a transaction or neglected to register an account. The trial balance would not reflect these accounting issues.To Learn more About trial balance Refer To:
https://brainly.com/question/28830136
#SPJ4
FILL IN THE BLANK A(n) _____ exists between two entities when each row in the first entity matches many rows in the second entity, and each row in the second entity matches only one row in the first entity.
An instance of one entity can only be associated to one instance of a related entity in a one-to-many relationship between two entities.
A primary key is a field that helps a table's users identify a specific record by name. Rows and columns in a field each represent an entity. In a relational database, each table, also known as a relation, includes one or more data categories in columns or attributes. A unique instance of data, or key, is contained in each row, also known as a record or tuple, for the categories listed in the columns. When a foreign key is used, a certain attribute or set of attributes is selected as the main key that can be used as a reference in other tables.
Learn more about database here-
https://brainly.com/question/29839039
#SPJ4
According to the USF Policy on Academic Integrity of Students (Links to an external site.)(Links to an external site) (Links to an external site.)which of the choices below is considered a LEVEL THREE violation.a.Failure to footnote or give proper acknowledgement in an extremely limited section of an assignment.b.Using a purchased term paper or other materialsc.Quoting directly or paraphrasing, to a moderate extent, without acknowledging the source.d.Submitting the same work or major portions of it to satisfy requirements of more than one course
Using a term paper that was purchased or other resources. The correct answer is option (b).
What is the rule of academic integrity?The cornerstone of USF's dedication to the academic honesty & personal integrity of its university community is academic integrity. Honesty, respect, and fairness are some of the core characteristics that serve as the foundation for academic integrity. It's critical to understand that cheating at USF will result in detection and reporting. If you're lucky, the assignment or test will just get you a 0.
Clearly citing or referring the source to show where the information you employ came from. submitting you own work and taking your own tests. adhering to research guidelines and appropriately reporting study findings.
To know more about academic integrity, visit:
https://brainly.com/question/2488723
#SPJ4
Your company has data stored in the following locations:
Azure Storage blobs
Amazon S3
Azure Files
You need to recommend a solution to migrate and transform the data to Azure SQL database. The solution must minimize administrative effort.
What should you include in the recommendation?
Select only one answer.
Azure Functions
Azure Logic Apps
Azure Data Factory
SQL stored procedures
I would recommend using Azure Bastion. Azure Bastion uses multi-factor authentication, which helps to further minimize the exposure of virtual machines on the internet.
What is Azure Bastion?Azure Bastion is known as fully managed service that has allows you to remotely the access your virtual machines that securely just via the Remote Desktop Protocol (RDP) or the Secure Shell (SSH) directly from the Azure portal.
This simply means that one or you can access the virtual machines just without having to just expose them directly to the internet, as the connection has been made through Azure's infrastructure.
Therefore, I would recommend using Azure Bastion. Azure Bastion uses multi-factor authentication, which helps to further minimize the exposure of virtual machines on the internet.
Learn more about internet on:
https://brainly.com/question/14823958
#SPJ1
All users at your site are using the bash shell. You want to set a variable that will apply to every user and always have the same value. Which of the following shell configuration files should you place this variable in?/etc/profile
The best location to set a variable that will apply to every user and always have the same value would be in the "/etc/profile" or "/etc/bash.bashrc" file. These files are system-wide configuration files that are read by all users when they open a new bash shell.
What is Bash shell?
BASH is an acronym for Bourne Again Shell, a clever name that pays homage to Bourne Shell (i.e., invented by Steven Bourne).
Brian Fox created Bash as an improved version of the Bourne Shell program'sh'. It is a GNU open source project. It was released in 1989 as one of the most popular GNU/Linux shell distributions. It outperforms Bourne Shell in terms of functionality for both programming and interactive use. It includes command line editing, key bindings, an unlimited command history, and other features.
To learn more about Bash shell, visit: https://brainly.com/question/18331567
#SPJ4
the development team should have all the skills needed to:group of answer choicescomplete the project as estimated when the date and cost are committed to the product owner.turn the product backlog items it selects into an increment of potentially releasable product functionality.do all of the development work, except for specialized testing that requires additional tools and environments.
A development team is a collection of individuals who work together to create software, a product, and occasionally a service.
What is Technology?Technology is the application of knowledge to the attainment of realistic objectives in a repeatable manner.
The term "technology" [1] can also refer to the outputs of such endeavors both physical tools, like utensils or machines, and immaterial tools, like software. Science, engineering, and daily living all depend heavily on technology.
Significant societal changes have been brought about by technological breakthroughs.
The earliest known technology is the stone tool, which was employed during prehistoric times.
This was followed by the ability to regulate fire, which helped to accelerate the development of language and the expansion of the human brain during the Ice Age.
The Bronze Age wheel's development paved the way for more advanced machinery and faster mobility. newest technological innovations, such as printing.
Hence, A development team is a collection of individuals who work together to create software, a product, and occasionally a service.
learn more about technology click here:
brainly.com/question/7788080
#SPJ4
The ability to transmit in both directions, but only in one direction at a time is an example of _______________ transmission.
a. simplex
b. full-duplex
c. half-duplex
d. analog
e. digital
The ability to transmit in both directions, but only in one direction at a time is an example of Half-duplex transmission.
What is Half-duplex transmission?Half-duplex transmission is a communication system in which two connected devices can communicate with each other, but only in one direction at a time. This means that data can only travel in one direction at a time, either from the transmitter to the receiver or from the receiver to the transmitter, but not in both directions simultaneously. Half-duplex transmission is commonly used in walkie-talkies and CB radios. In this type of system, the communication is generally bidirectional, but it cannot occur at the same time. Instead, the two parties must take turns sending and receiving signals. This type of transmission is much slower than full-duplex transmission, which allows both parties to send and receive at the same time.
To learn more about Half-duplex transmission
https://brainly.com/question/14619054
#SPJ4
true/false. byte pair encoding is a data encoding technique. the encoding algorithm looks for pairs of characters that appear in the string more than once and replaces each instance of that pair with a corresponding character that does not appear in the string. the algorithm saves a list containing the mapping of character pairs to their corresponding replacement characters.
True Because a string may be returned to its original form, byte pair encoding is an example of a lossless transformation.
One key is used for symmetric encryption, and it should be kept a secret. Both data encryption and decryption utilise the same key. The speed of computer processing cannot be greatly increased. A crowdsourcing model, which is constrained by the amount of individuals available to work on the problem, is necessary for large-scale issues. By detecting the most frequent byte pairs, BPE was initially a data compression method that helps you determine the optimal way to represent data. To discover the optimum text representation with the fewest tokens possible, we currently employ it in NLP.
To learn more about encoding click the link below:
brainly.com/question/13963375
#SPJ4
Write the c++ program that will create the one-dimensional array of random integer numbers of the size provided by the user and will search it (using the linear search, i.e. by checking all elements one by one) in order to find the particular value. The search should be done by the special function called inside the every iteration of the loop (for each element), returning the information about whether it is the searched element or not. Each function call should be registered by the static variable. The search function should be able to perform the operation left to right or right to left, depending on the user’s choice. Information returned by the program should include the index of the searched element (which is obviously related to the number of search function calls, stored inside the static variable).
Answer:
#include <iostream>
#include <cstdlib>
#include <ctime>
using namespace std;
int* createArray(int size) {
int* array = new int[size];
srand(time(0)); // seed random number generator
for (int i = 0; i < size; i++) {
array[i] = rand() % 100; // fill array with random numbers between 0 and 99
}
return array;
}
static int searchFunctionCalls = 0;
bool search(int* array, int size, int value, bool reverse) {
searchFunctionCalls = 0; // reset search function calls
if (reverse) {
for (int i = size - 1; i >= 0; i--) {
searchFunctionCalls++;
if (array[i] == value) {
return true;
}
}
} else {
for (int i = 0; i < size; i++) {
searchFunctionCalls++;
if (array[i] == value) {
return true;
}
}
}
return false;
}
int main() {
int size;
cout << "Enter the size of the array: ";
cin >> size;
int* array = createArray(size);
int value;
cout << "Enter the value to search for: ";
cin >> value;
bool reverse;
cout << "Search left to right? (0/1): ";
cin >> reverse;
reverse = !reverse;
if (search(array, size, value, reverse)) {
cout << "Value found in array, number of search function calls: " << searchFunctionCalls << endl;
} else {
cout << "Value not found in array, number of search function calls: " << searchFunctionCalls << endl;
}
delete[] array;
return 0;
}
Explanation:
In the above program, the createArray function creates a one-dimensional array of the size provided by the user and fills it with random integers between 0 and 99. The search function takes in the array, its size, the value to search for, and a boolean indicating whether the search should be done left to right or right to left. It uses a for loop to iterate through the array and check each element. A static variable searchFunctionCalls is used to keep track of the number of times the search function is called. The main function takes user input for the size of the array, the value to search for, and the direction of the search, and calls the createArray and search functions to perform the search. If the value is found, the program outputs the index of the element and number of calls to the search function. If the value is not found, it outputs the number of calls to the search function.
Shows the nesting order of HTML tags based on the current selection or the current location of the intersection point
The majority of HTML components can contain a varying number of additional elements, which are composed of content, tags, and attributes. eg:- <p>Here is some <b>bold</b> text.</p>.
Which HTML5 element identifies information with a tenuous connection to other things?The HTML element known as "aside" designates a section of a page whose content is only loosely related to the document's primary text. Frequently, sidebars or call-out boxes are used to present asides. For its closest ancestor sectioning content or sectioning root element, the HTML element footer> acts as a footer.
In HTML 5, how many tags are there?In HTML, four tags are necessary. HTML stands for "title," "head," and "body." The opening and closing tag, a description, and an illustration are provided in the table below. These tags go at the start and end of an HTML document.
To know more about HTML tags visit:-
https://brainly.com/question/19718210
#SPJ4
which of the following statements is false? program execution begins at main(). a program executes one statement at a time. each statement ends with a period.an output statement outputs a value to the screen.
The sole untrue assertion among the others is "Each statement concludes with a period."
Program Execution: What Is It?After our program has been converted to machine code, we must run it to see the outcomes. Execution describes the method by which a computer interprets our software or follows its directives. For instance, you wrote a program that prints your name. Once the compiler has transformed your source code to machine code, your program will then be run, or the computer will carry out the instructions in your program telling it to print your name.
The execution of our program starts with the main function and ends with the end of main. The main function has control over how the program is run by calling other program functions.
To know more about Execution, visit:
https://brainly.com/question/28961894
#SPJ4
fill in the blank: a preference in favor of or against a person, group of people, or thing is called . it is an error in data analytics that can systematically skew results in a certain direction. 1 point data interoperability data collection data bias data anonymization
A form of inaccuracy called data bias causes results to be consistently skewed in one direction.
In data analytics, the types of bias that are frequently found are correct Observer bias, interpretation bias, and confirmation bias. Data analytics transforms unprocessed data into useful insights. It comprises a variety of methods, technologies, and tools for leveraging data to identify patterns and address issues. Data analytics can influence business procedures, enhance decision-making, and promote company expansion. Multiple tools, including computers, the internet, cameras, environmental sources, and human employees, can be used to accomplish this. Data must first be arranged so that it may be studied after it has been gathered. A spreadsheet or other piece of software that can handle statistical data may be used for this.
Learn more about data here-
https://brainly.com/question/11941925
#SPJ4
What is the error in the following array initialization?
int[] myTest = {9.7,“Megan”,7};
A.
Curly braces are only for initializing.
B.
Array elements should not be in quotes.
C.
All elements should be of the same type.
D.
Initialization is not allowed during declaration.
Answer:
C. All elements should be of the same type.
Explanation:
The array "myTest" is declared as an array of integers, but one of its elements is a double type and another is a string type. This is not allowed in Java because all elements of an array must be of the same type.
would greatly appreciate it if you could support me at https://saweria.co/Gerrycesare
In what area do we see virtual and augmented reality demonstrating abstract concepts, allowing interaction between users and simulated equipment, and providing students with feedback to improve their knowledge and skills?
Business and industry
Education and learning
Medical field
Weather forecasting
The area that we do see virtual and augmented reality demonstrating abstract concepts, allowing interaction between users and simulated equipment, and providing students with feedback to improve their knowledge and skills is option B: Education and learning.
What is augmented reality?
Augmented Reality (AR) technology enhances the real-world environment by overlaying digital information and interactive elements, such as images, text, and 3D models, onto the user's view of the physical world.
Therefore, In education and learning, AR can be used to enhance the classroom experience by allowing students to interact with and manipulate virtual objects, simulations, and animations, which can help them better understand abstract concepts and improve their knowledge and skills. Additionally, AR can be used in medical field and weather forecasting as well.
Learn more about augmented reality from
https://brainly.com/question/9054673
#SPJ1
The code segment below is intended to print the length of the shortest string in the array wordArray. Assume that wordArray contains at least one element.
int shortest = /* missing value */;
for (String word : wordArray) {
if (word.length() < shortest) {
shortest = word.length();
}
}
System.out.println(shortest);
Which of the following should be used as the initial value assigned to shortest so that the code segment works as intended?
Integer.MAX_VALUE
Integer.MIN_VALUE
0
word.length()
wordArray.length
Integer.MAX_VALUE should be used as the initial value assigned to shortest so that the code segment works as intended. Integer. MAX_VALUE is a constant in the Integer class in Java and it represents the maximum value an int can hold, which is 2147483647.
By initializing the variable 'shortest' with Integer.MAX_VALUE, it ensures that the first word in the wordArray will always have a length less than the initialized value, thus allowing the code to correctly update the value of 'shortest' with the length of the shortest string in the wordArray.
Learn more about code: https://brainly.com/question/497311
#SPJ4
Which of the following options allows you to align text in your document so that it is fully flush with both margins?
Align Left
Center
Align Right
Justify
Justify allows you to align text in your document so that it is fully flush with both margins. Justify alignment is a type of text alignment that aligns text along both the left and right margins, creating a "block" of text that is fully flush with both margins.
This alignment is often used in formal documents and publications, as it creates a clean, organized look. It is different from "Align Left" which aligns the text to the left margin and "Align Right" which aligns the text to the right margin. "Center" aligns the text in the center of the document. Justify is a good option if you want your text to have a neat and polished look.
Learn more about text alignment: https://brainly.com/question/13423071
#SPJ4
A network administrator is troubleshooting a connectivity issue. The administrator performs a port scan, and the following information is generated:
Port Number
22
53
80
1443
443
3389
445
Status
Open closed closed
Open closed closed closed
Which of the following standard ports should be open to allow a successful RDP connection?
A-53
B-443
C-445.
D-1389
Microsoft-DS port 445 (for SMB communication over IP with MS Windows services, such as file and printer sharing) is used. For communication with MS Windows services (such file/printer sharing), use port 139 (NetBIOS-SSN) of the NetBIOS Session Service protocol.
What is network administrator?The regular maintenance of these networks is handled by network and computer system administrators. The computer systems of a business, including LANs, WANs, network segments, intranets, and other data communication systems, are organised, installed, and supported by these professionals. Systems and network administrators are paid very highly for their expertise. Network or systems administrators typically make roughly $84,810 per year, or $40.77 per hour, according to the Bureau of Labor Statistics.In fact, it is generally acknowledged in the sector to be among the most difficult parts of contemporary IT. Configuring and troubleshooting networks requires highly specialised knowledge and abilities because every network is unique.To learn more about network administrator, refer to:
https://brainly.com/question/29462344
#SPJ1
the quality of an lcd monitor or lcd screen depends on several factors. which of the following is not true about the factors that affect lcd display quality?
The option "a lower resolution makes a screen items appear smaller" is not point the factors that affect LCD display quality. It's important to consider these factors and how they align with your specific needs when choosing an LCD monitor or screen.
Some important factors that can affect the quality of an LCD monitor or screen include:
Resolution: The number of pixels on the screen. A higher resolution will generally result in a sharper, clearer image.Viewing angle: The angle at which the screen can be viewed without the image becoming distorted or discolored.Refresh rate: The number of times per second the image on the screen is refreshed. A higher refresh rate can reduce motion blur and make the image appear smoother.Contrast ratio: The difference between the darkest and lightest colors that the screen can display. A higher contrast ratio can result in a more vivid and dynamic image.Color accuracy: The ability of the screen to display accurate colors.Response time: The amount of time it takes for a pixel to change from one color to another.The quality of an lcd monitor or lcd screen depends on several factors. which of the following is not true about the factors that affect lcd display quality?
The quality of an LCD monitor or LCD screen display depends primarily on its resolution.
A lower resolution makes a screen items appear smaller.
Resolution is the number of horizontal and vertical pixels in a display device.
A higher resolution uses a greater number of pixels and provides a sharper image.
Learn more about LCD Monitor: https://brainly.com/question/13167299
#SPJ4
You have an Azure subscription that contains a storage account named storage1 and the following virtual machines:
VM1 has a public IP address of 13.68.158.24 and is connected to VNET1/Subnet1
VM2 has a public IP address of 52.255.145.76 and is connected to VNET1/Subnet1
VM3 has a public IP address of 13.68.158.50 and is connected to VNET1/Subnet2
The subnets have the following service endpoints:
Subnet1 has a Microsoft.Storage service endpoint
Subnet2 does NOT have any service endpoint
Storage1 has a firewall configured to allow access from the 13.68.158.0/24 IP address range only.
You need to identify which virtual machines can access storage1.
What should you identify?
Select only one answer.
VM1 only
VM3 only
VM1 and VM2 only
VM1 and VM3 only
VM1, VM2, and VM3
Since you need to identify which virtual machines can access storage1. The option that you should identify is option c: VM1 and VM2 only
What is the Azure subscription about?Based on the information provided, VM1 and VM2 are the only virtual machines that can access storage1. This is because VM1 and VM2 are both connected to VNET1/Subnet1, which has a Microsoft.Storage service endpoint.
This service endpoint allows VMs in that subnet to access the storage account. Additionally, the storage account has a firewall configured to allow access from the 13.68.158.0/24 IP address range, which includes the public IP addresses of both VM1 and VM2. On the other hand, VM3 is connected to VNET1/Subnet2 which does not have any service endpoint, thus VM3 is unable to access the storage account.
Learn more about Azure subscription from
https://brainly.com/question/30257474
#SPJ1
The definition of software engineering that points to a multiperson construction of multiversion software is from:
a. Ian Sommerville.
b. the U.S. Department of Defense.
c. Shari Pfleeger.
d. the NATO conference.
e. David Parnas.
The definition of software engineering that points to a multiperson construction of multiversion software is from David Parnas.
What is software engineering?Software engineering is a methodical engineering approach to developing software. A software engineer is someone who uses software engineering principles to design, develop, maintain, test, and evaluate computer software. Software engineering is the application of engineering principles used in the field of physical systems to the design, development, testing, deployment, and management of software systems. Yes, software engineering can be difficult to learn at first, especially for those who lack programming or coding skills, as well as any background or knowledge of technology, but there are many courses, tools, and other resources available to help people learn to become Software Engineers.
Here,
David Parnas' definition of software engineering refers to the multiperson construction of multiversion software.
To know more about software engineering,
https://brainly.com/question/29217721
#SPJ4
in this phase, your program should receive two filenames as command line arguments, the new books file and request file, which the program should read in. the list of new books and list of requested books should be stored in only two std::vector containers. because some code to open these two files will probably be equivalent, you are encouraged to write generic functions in order to avoid code duplication. new books file
The program should receive two filenames as command line arguments, which it should read in. The two files should be stored in two std::vector containers. To avoid code duplication, generic functions should be written to open and process the files.
What is program?A program is a set of coded instructions designed to produce a specific result when executed by a computer or other electronic device. It is a set of instructions that can be executed by a processor in order to carry out a specific task or set of tasks. Programs are usually written in a high-level programming language, such as C or Java, which are then compiled into machine language and loaded into memory. Programs allow computers to do specific tasks, such as running an operating system, accessing data, and playing games.
The new books file should contain a list of new books that have been added to the library. The request file should contain a list of books that have been requested by patrons. The program should use the information from these two files to determine which books from the new books list should be sent to fulfill the patron requests. The program should then output the list of books that should be sent.
To learn more about program
https://brainly.com/question/23275071
#SPJ4
Which of the following are true about a LAN-connected TCP/IP host and its IP routing (forwarding) choices? (Choose two answers.)
A. The host always sends packets to its default gateway.
B. The host sends packets to its default gateway if the destination IP address is in a different class of IP network than the host.
C. The host sends packets to its default gateway if the destination IP address is in a different subnet than the host.
D. The host sends packets to its default gateway if the destination IP address is in the same subnet as the host.
The host transmits packets to its default gateway if the destination IP address is in a subnet that is not the same as the host or if the destination IP address is in a different type of IP network than the host.
Which of the following is true about a LAN connected TCP IP?Whenever the target IP address is in the same subnet as the host, the host delivers packets to its default gateway. Answers: B & CSupport In cases where the destination IP address is in a different class of IP network than the host, the host transmits packets to its default gateway.
The most common two-branch logic used by IPv4 hosts is simple. The sender delivers the IP packet straight to the recipient host when sending an IP packet to another computer on the same LAN or subnet. In order to forward an IP packet, routers first check the packet's destination IP address against their IP routing table. If the two match, the router will use the route's matching forwarding instructions. Routers are layer-3 devices that only inspect layer-3 packets, not layer-4 segments.
Therefore the correct answer is option B ) The host sends packets to its default gateway if the destination IP address is in a different class of IP network than the host and C ) The host sends packets to its default gateway if the destination IP address is in a different subnet than the host.
To learn more about LAN refer to :
https://brainly.com/question/8118353
#SPJ4
write the general form and the prediction equation of the regression model for fuel economy using horsepower, quarter mile time, and rear axle ratio as predictors. include interaction terms for horsepower and quarter mile time; horsepower and rear axle ratio
Fuel Economy = 0 + 1*(Horsepower) + 2*(Quarter Mile Time) + 3*(Rear Axle Ratio) + 4*(Horsepower*Quarter Mile Time) + 5*(Horsepower*Rear Axle Ratio) is the general form of the regression model for fuel economy.
The axle ratio describes the proportion between an axle's drive shaft and ring gear. A number is used to represent how much torque an engine can deliver to a vehicle's wheels. Because more torque is transferred to the wheels when the axle ratio is larger, the acceleration and peak speed are improved. Because it can affect performance, speed, and fuel economy, axle ratio is a significant factor to consider when choosing a car. The axle ratio and engine power of a vehicle must be balanced appropriately for it to run at its most effective level. Furthermore, since a higher axle ratio may result in a decrease in fuel economy, it is crucial to comprehend the effects that various axle ratios might have on fuel efficiency.
To know more about Rear Axle Ratio
brainly.com/question/20698993
#SPJ4
which tof the following techniques of datda visualization is used for adding a bit of intentional noise to a visualization
Charts, graphs, and maps in the forms of line charts, bar graphs, tree charts, dual-axis charts, mind maps, funnel charts, and heatmaps are the primary types of data visualization.
What is data visualization?It's crucial to keep in mind that data teams are not the only ones who may use data visualization for a number of uses.
Data scientists and analysts use it to find and explain patterns and trends, while management uses it to communicate organizational structure and hierarchy.
Data visualization is divided into four main categories by Harvard Business Review (link is external to I-BM): idea creation, idea illustration, visual discovery, and everyday dataviz.
Hence, Charts, graphs, and maps in the forms of line charts, bar graphs, tree charts, dual-axis charts, mind maps, funnel charts, and heatmaps are the primary types of data visualization.
learn more about data visualisation:
https://brainly.com/question/29662582
#SPJ4
which of the following is the term for a device (usually external to a computer) that is plugged into a computer's communication port or connected wirelessly?
A frequently external to the computer device that connects wirelessly or is connected to the communication port of a computer.
Common peripherals include keyboards, mouse, screens, speakers, and printers. External hardware components, also known as peripheral components, are the objects that are typically connected to a computer from the outside to control input or output operations. These hardware elements either function as input devices or as output devices for the results of the operations of the program (output). The most basic computer setup normally includes the computer chassis, monitor, keyboard, and mouse, but your computer also has additional ports that you can utilize to connect a wide range of other devices. These objects are peripheral in nature.
Learn more about communication here-
https://brainly.com/question/14809617
#SPJ4
Why does TCP use a sequence number in the header?
a. to reassemble the segments into data
b. to identify the application layer protocol
c. to indicate the number of the next expected byte
d. to show the maximum numbers of bytes allowed during a session
The "Sequence numbers" are used to reorder the segment in an IP datagram in order to prevent packet loss or out-of-order delivery.
What are "Sequence numbers"?These packets have a sequence number that is assigned to them when they are sent.
This is because it is not guaranteed that packets will reach on large networks, such as the internet, in the same sequence that they were sent.
When there is network congestion, some packets may be sent by one route, and if that route becomes congested at some time (think of it as a traffic jam), the subsequent packets will be sent over an alternate route.
Therefore, packets that got caught in the congestion may arrive after those that were sent via the detour.
That's when sequence numbers start to be helpful.
Hence, The "Sequence numbers" are used to reorder the segment in an IP datagram in order to prevent packet loss or out-of-order delivery.
learn more about sequence numbers click here:
https://brainly.com/question/26352026
#SPJ4
Computer 1 on network A, with IP address of 10.1.1.8, wants to send a packet to Computer 2, with IP address of 10.1.1.205. Taking in consideration that computer 1 is sending a FTP request to computer 2, and the source port on computer 1 is 21086, which of the following contains the correct information for the first TCP segment of data?
TCP enables process-to-process communication, or the data transfer between separate processes running on end systems.
What are TCP segment?
In other words, a stream of bytes is used to transmit and receive the data (unlike UDP or IP that divides the bits into datagrams or packets). The network layer, which supports TCP, sends information packets rather than streams of bytes.
As a result, TCP creates segments by grouping several bytes together, adding a header to each segment, and then sending the segments to the network layer.
Port numbers or port addresses are used for this. The 16-bit port numbers on a host can be used to determine which process is sending or receiving data.
Therefore, TCP enables process-to-process communication, or the data transfer between separate processes running on end systems.
To learn more about TCP, refer to the link:
https://brainly.com/question/28119964
#SPJ1
HELP FAST!!
Helena is creating a Python program to teach a younger sibling how to tell time. Helena begins by writing a very general pseudocode and then adds more elements to it. She reviews it and changes a few aspects. Which term describes the process that is being used?
A.
applicative process
B.
iterative process
C.
sympathetic process
D.
sequential process
Iteration assists you in detecting problems before they go out of control. The term that describes the process is being used is applicative process. Thus, option A is correct.
What is Iteration?Iteration has been known as the design technique that revolves around a cyclical process of developing, testing, evaluating, and refining a product or process.
Changes and adjustments are made based on the outcomes of testing the most current version of a concept. She reviews it and changes a few aspects.
Therefore, Iteration assists you in detecting problems before they go out of control. The term that describes the process is being used is applicative process. Thus, option A is correct.
Learn more about applicative on:
https://brainly.com/question/14400492
#SPJ1
A stripped down version of Windows Server 2008 operating system that does not include the Windows Explorer Shell and that reduces potential security vulnerabilities and improves uptime.
The version of Windows Server 2008 operating system that you are describing is called Windows Server Core.
Windows Server Core is a minimal installation option for Windows Server 2008 that includes only the necessary components to run specific server roles, such as Active Directory Domain Services, DHCP Server, DNS Server, and File and Print Services. It does not include the Windows Explorer shell, or other GUI components, which reduces the attack surface and improves uptime by reducing the number of updates and reboots required.
It is designed for administrators who want to run specific server roles and prefer a command-line interface for managing their servers, and it also reduces the amount of disk space and memory required to run the OS.
It is also worth noting that Windows Server Core is a feature that is present in more recent versions of Windows Server such as 2012, 2016, and 2019.
Learn more about Windows Server here:
https://brainly.com/question/28113597
#SPJ4
select the correct command, term, or option. this list in microsoft edge contains bookmarks/pointers to web sites you have saved. answer 1 choose... the unique address of a web page is also called this. answer 2 choose... this button in microsoft edge looks like three horizontal dots and allows you to access the print command. answer 3 choose... this is a small text file that a website might save to your hard drive to help remember your settings. answer 4 choose... , !, and dogpile are all examples of this web service that enables you to locate web content based on keywords. answer 5 choose... you can have more than one web page open at once in microsoft edge because of this feature. answer 6 choose... this microsoft edge feature enables you to keep your most often visited websites at the top of the browser window at all times. answer 7 choose...
The selected commands are given below.
BookmarksURL (Uniform Resource Locator)More buttonCookiesTabsSpeed DialPinned sitesWhat do you mean by URL?A URL (Uniform Resource Locator) is a string of text that is used to identify a specific resource on the internet, such as a web page, an image, or a file. It serves as an address that can be used to locate a resource and access it via the internet.
A typical URL has the following format:
[protocol]://[hostname or IP address]:[port number]/[path]?[parameters]#[fragment]
The protocol specifies how the resource should be accessed, such as "http" or "https" for web pages.The hostname or IP address is the domain name or IP address of the server where the resource is located.The port number is an optional field that is used to specify a non-default port for the server to use.The path is the location of the resource within the server's file system.The parameters are optional key-value pairs added after "?" to provide additional information to the serverThe fragment is an optional field that is used to specify a specific section of the resource to load.For example, the URL https://www.example.com/about is a URL that refers to the "about" page on the "www.example.com" website, using the "https" protocol.
To know more about server visit:
https://brainly.com/question/7142205
#SPJ4