In the redox conversion of SO3 to SO-, S is ? (Oxidation or Reduction) and it's oxidation number goes from ? to?

S+O2 → SO2 (Sulphur dioxide) is a type of  combination reaction of various reactions defined in chemistry.

When two or more elements or compounds combine to create a single product, the reaction is termed as a direct combination reaction occurring as per the first line . Equations of the form X + Y XY are used to depict these reactions. A combination reaction occurs when two or more components combine to form a single compound.

Due to their high reactivity, oxygen and halogens are prone to combine with other elements to form new substances generally through Combination reaction.

To know more about combination reaction visit

https://brainly.com/question/3664113

#SPJ4

Option a - molecules with too little energy to react represent the unshaded area under the curves.

A molecule is a collection of chemically bonded atoms. The atoms in a molecule can be of the same element (such as diatomic oxygen, O2) or different elements (such as water, H2O). The chemical bond between the atoms can be covalent bond, in which the atoms share electrons, or ionic, in which the atoms transfer electrons.The number of molecules in a sample of a substance is known as the Avogadro's number (NA), which is a fundamental constant of nature and is approximately 6.022 x 10^23 per mole. The Avogadro's number is used to convert between the number of atoms or molecules in a sample and the amount of substance measured in moles.When it comes to energy, the total energy of a sample of a substance is typically measured in terms of its internal energy (U), which is the sum of the kinetic and potential energies of all the atoms or molecules in the sample.

Learn more about molecules here:

https://brainly.com/question/19922822

#SPJ4

the complete question is :

The following figure shows molecular energy distributions for two temperatures and the activation energy for a reaction. The un-shaded regions beneath the curves signify

A- molecules with too little energy to react. a molecular energy

B- distribution at the lower of the two temperatures shown.

C-molecules with enough energy to react. a molecular energy

D-distribution at the higher of the two temperatures shown.

Answer:

They can't be in all avobe of this beacuse they may be homogeneous , colorless , heterogeneous and may be odorless .

So they cant be any one.

By :- Utsav Xettri

Answer:

A it was so hard to answer

Explanation:

Relations kmsksodnnwjsieneoe

The statement that a physical change is a change in matter's form without a corresponding change in its chemical properties is valid.

Physical modifications examples include:

1. changing a substance's condition, like when ice melts to form liquid water or when water boils to form steam

2. altering a substance's dimensions or shape, such as by sawing a piece of wood or shattering a glass

3. combining two or more things, as when you swirl sugar into coffee

4. separating a combination into its constituent elements, as when sand is filtered out of water.

A physical change does not affect the material's atoms or molecules, and the chemical property composition of the substance does not change. By undoing the physical transformation, such as by turning liquid water into ice, the substance can be returned to its former state. It's vital to remember that some changes, like rusting, burning, or rotting, may appear to be physical changes but are actually chemical changes. These alterations in chemical composition and attributes occur as a result of a chemical reaction in which the original ingredients are changed.

To know more about chemical properties please refer: https://brainly.com/question/1935242

#SPJ4

Question - A physical change is a change of matter from one form to another without a change in chemical properties. State true or false.

The non-renewable source of energy is all of the given options, which means option D is the correct choice.

Nonrenewable power source consist of coal, herbal gas, oil, and nuclear power. Once those assets are used up, they can't be replaced, that is a chief trouble for humanity as we're presently depending on them to deliver maximum of our power needs. Fossil fuels - coal, oil and fueloline - on the opposite hand, are non-renewable assets that take masses of hundreds of thousands of years to form. Fossil fuels, while burned to provide power, purpose dangerous greenhouse gas emissions, which include carbon dioxide.

Thus, coal, petroleum, natural gas are non-renewable sources of energy.

To learn more about non-renewable check the link below:

https://brainly.com/question/14432353

#SPJ4

Answer:

The grouping of elements in order of atomic number

Explanation:

law stating that the elements, when listed in order of their atomic numbers (originally, atomic weights), fall into recurring groups, so that elements with similar properties occur at regular intervals.

Water with chemical formula H2O is formed by the combination of two hydrogen atoms and one oxygen atom. so there are total three atoms in one mole of H2O.

Water is formed by the combination of Hydrogen and Oxygen. According to the Law of Constant Proportions, the atoms present in a compound are combined in a fixed ratio to form that compound. As a compound of H2O is formed by the combination of H and O in the ratio of 2 : 1. Therefore, three atoms are there in one mole of H2O. Water is composed of the chemical elements hydrogen and oxygen. It exists in gaseous, liquid, and solid states. It is one of the most plentiful and essential of compounds. A tasteless and odorless liquid at room temperature, it has the important ability to dissolve many other substances.

To learn more about Water please visit:

https://brainly.com/question/1313076

#SPJ4

The equilibrium constant (K) for the reaction at this temperature can be calculated using the following equation: K = ([H2]^0.4 * [I2]^1.6) / [H2I]^2 Where [H2] is the concentration of hydrogen gas, [I2] is the concentration of iodine, and [H2I] is the concentration of the hydrogen iodide product.

Assuming the reaction mixture is initially at concentration 1, the initial concentrations are: [H2] = 0.400 [I2] = 1.60 [H2I] = 0

At equilibrium, the concentrations are: [H2] = 0.24 (60% of the initial hydrogen concentration has reacted) [I2] = 0.96 [H2I] = 0.8

Therefore, the equilibrium constant (K) for the reaction is: K = ([0.24]^0.4 * [0.96]^1.6) / [0.8]^2 K = 0.088

Learn more about chemical solutions:

https://brainly.com/question/26310043

#SPJ4

When gathering glassware and equipment for an experiment, we must follow safety protocols.

Following protocols must be followed while handling glassware and equipment:

To learn more about the ' safety protocol' try the:

https://brainly.com/question/17994387

#SPJ4

The periodic chart has many different types of elements. Some elements are metals, some are nonmetals, and yet others are metalloids. Therefore, in below given ways we answers can be explained.

Metals are hard, conduct electricity, are ductile, lustrous, and malleable materials.

Since metals have free electrons that's why they can conduct electricity. Since atoms in metals are very closely packed in a definite crystal solid. It is not brittle that is it can not be broken down easily.

Among given elements:

a)metals: Copper, Aluminium, Iron

non metals: sulfur, iodine

b) There is a brown coating on the iron nail, due to rusting

c) good conductors of heat: copper

d)M+H[tex]_2[/tex]O[tex]\rightarrow[/tex] M(OH)/M(OH)[tex]_2[/tex]

Therefore, in above given ways we answers can be explained.

Learn more about the metals, here:

https://brainly.com/question/27859211

#SPJ1

In ten seconds total of 5 waves crash onto the shore of the beach .

The distance between each wave crest on the water is 8 meters.

The distance between two wave crests, or the wave length, is the measurement of this distance.

We are aware that there are 8 metros between each wave's crest.

There are five wave crests in all, with the first and second wave crests separated by eight metros.

the second and third wave crests are separated by 8 metros.

Wave length is therefore 8 + 8 = 16 metros

wavelength:

To learn more about wavelength refers to;

https://brainly.com/question/30307819

#SPJ1

The third shell can hold 32 electrons. Within the shells, electrons are further grouped into subshells of four different types, identified as s, p, d, and f in order of increasing energy.

A negatively charged subatomic particle known as an electron can either be free or attached to an atom (not bound). One of the three main types of particles within an atom is an electron that is bonded to it; the other two are protons and neutrons. The nucleus of an atom is made up of electrons, protons, and neutrons together.

Early atomic researchers thought that electrons in an atom orbited its nucleus in spherical orbits at precise distances, much like planets orbit stars. The orbits that are farthest from the nucleus in this model—known as the Bohr model—contain the most energy. The atom emits electromagnetic radiation when an electron transitions from a higher energy orbit to a lower energy orbit. Letters are also sometimes used to refer to the shells. These include K, L, M, N, O, P and Q, again starting from the nucleus and working out. For instance, the third shell might be referred to as the M shell or 3m.

To learn more about electrons refers to;

https://brainly.com/question/14069394

#SPJ1

When the View from Earth is a new moon phase, the View from the Moon would be a full moon.

The Moon is known as the earth's only natural satellite and is the fifth largest satellite in the Solar System and the largest and most massive relative to its parent planet, with a diameter about one-quarter that of Earth.

When we see the moon as nearly full, others on another part of the earth would see a slim crescent Earth.

Whereas when we see a completely full moon, the moon, Earth and sun are said to be in a line – with Earth in the middle.

Learn more about the moon at: https://brainly.com/question/338746

#SPJ1

The mass of MgSO4, in grams, present in the solution is 240.73 g

Considering the query,

We need to figure out how much MgSO4 there is in the solution, in grammes.

First, we'll calculate how many moles of MgSO4 there are in the 1L stock solution at 2.0 M concentration.

1 L of volume

Using the equation

Number of moles = Volume * Concentration There are 2.0 1 = 2 moles of MgSO4 in the system.

There are 2 moles of MgSO4 in total.

Here is the mass of MgSO4 in grammes.

Using the equation

Molar mass is equal to the product of the number of moles.

Molar mass is equal to the product of the number of moles.

MgSO4's molar mass is 120.366 g/mol. The solution's mass of MgSO4 is equal to 2 120.366 grammes.

The amount of MgSO4 in the solution is 240.73 g.

Consequently, 240.73 grammes of MgSO4 are present in the solution.

To learn more about mole substance refers to;

https://brainly.com/question/3659332

#SPJ1

Answer: It is possible that the seller's claims about the bone being a genuine dinosaur bone and being 400 million years old are true. However, without additional evidence or verification from independent scientists, it is also possible that the bone is not authentic or that the carbon dating results have been manipulated or misinterpreted. It is important to be skeptical and to conduct further research before making a decision about the authenticity of the bone. Additionally, it is important to consider the source of the bone and the seller's reputation and credentials. It would be wise to seek out additional opinions from experts in the field before making a decision about the authenticity of the bone.

Area Temperature (°C) X 22 Y 18 Z 18 , The air will move from area Y to area X. Therefore, option A is correct.

The term pressure gradient is define as the change in pressure with horizontal distance. The SI Unit of pressure gradient is Pascal per meter. Mathematically, it's the gradient of pressure as a function of position.

The pressure gradient is the rise or fall in pressure. When pressure varies over a short distance, the gradient is steep, and when it changes over a long distance, it is gentle.

According  to given data, temperate of area X is greater than both area Y and Area Z.

Thus, air will move from area Y to area X.

Learn more about pressure gradient here:

brainly.com/question/13608541

#SPJ1

The pressure of the gaseous product alone can be calculated by subtracting the pressure of the water vapor, also known as the vapor pressure of water, from the total pressure of the gas collected over water.

When a reaction is carried out so that a gaseous product is collected over water, the pressure of the gaseous product can be affected by the pressure of the water vapor present in the collection container. To calculate the pressure due to the product gas alone, one must subtract the pressure of the water vapor (also known as the vapor pressure of water) from the total pressure of the gas collected. The vapor pressure of water is dependent on the temperature, it can be looked up in a table or calculated using an equation, and it can be used to determine the pressure of the gaseous product alone. This is important to know in order to accurately measure the amount of product gas produced in the reaction.

To know more about pressure

https://brainly.com/question/29341536?referrer=searchResults

#SPJ4

An acid-base indicator is used in an experiment to determine the pH of a solution. It changes color depending on the acidity or basicity of the solution, indicating whether the solution is acidic, neutral, or basic.

An acid-base indicator is a weak acid or weak base that changes color when it is in an acidic or basic environment. In the acid form, an indicator is one color and in the base form it is another color. Indicators are useful because they allow the experimenter to easily determine the pH of a solution without the need for a pH meter.

In addition, acid-base indicators are used as a visual aid in titrations as well as to determine the endpoint of a titration. This is because the color change of the indicator corresponds to the point at which the acid and base being titrated are present in stoichiometric amounts.

Learn more about pH

brainly.com/question/28609181

#SPJ4

The sequence in which the events are ranked in order to attain equilibrium is as follows.

Salt is first dissolved into its cations and anions by hydration of cations and anions.

In the second stage, hydrated anions and cations start to form a solid salt.

The rate of dissolution is equal to the rate of deposition in the last stage.

White dwarf star (WD) in a binary system is the initial state of the supernova. A companion star orbits the WD, and as it does so, it is accreting material onto it and creating an accretion disc.

Growing WD with accretion disc: The accretion disc expands as the partner star keeps dumping stuff onto the WD. The WD grows larger and more gigantic as a result of this.

WD at Chandrasekhar limit: When a WD hits its Chandrasekhar limit, it no longer has the ability to support any more mass without collapsing. When the WD has a mass that is around 1.4 times that of the Sun, this happens.

For more questions on cyclohexane

https://brainly.com/question/28559170

#SPJ4

10.2 ml of 5.0 m copper (ii) sulfate solution must be added to 160ml of water. This involves the process of dilution.

A 5.0 m copper(ii) sulfate solution must be added to 160 ml of water to achieve a .30 m copper (ii) sulfate. This is a dilution problem where you are diluting the 5.0 M solution with water to obtain a 0.30 M solution.  

The process of dilution is said to be process that involves decreasing the concentration of a solute in a solution by mixing with more solvent like adding more water to the solution. dilution of a solution means to add more solvent without the addition of more solute.

Volume x Molarity = Volume x Molarity

V1 M1 = V2 M2

(x ml) (5.0 M) = (160 + x ml) (0.30 M)

5x = 48 + 0.3x

4.7x = 48

x = 10.2 ml

putting the value of x we get,

V1 M1 = (10.2) (5.0) = 51

V2 M2 = (170.2) (0.3) = 51

To learn more about Dilution please visit:

https://brainly.com/question/1615979

#SPJ4

Metal oxides are created when metals and airborne oxygen combine. For instance, when heated in the air, copper interacts with oxygen to form copper oxide is called oxidation reaction.

An oxidation-reduction reaction, often known as a redox reaction, occurs when two chemical species exchange electrons (the atoms, ions, or molecules involved in the reaction). We are always surrounded by redox reactions, which include oxidation and reduction in the burning of fuels, metal corrosion, photosynthesis, and cellular respiration.

Slowly oxidising in air, copper corrodes and develops a brown or green patina. The procedure is more quicker and mostly yields black copper oxide at higher temperatures. Hydrogen gas, a fairly powerful reducing agent, has the ability to decrease the oxide, creating a smooth, shining copper surface.

Learn more about Oxidation here:

https://brainly.com/question/16976470

#SPJ4

Answer:

The key difference between polyvalent element and polyatomic ion is that polyvalent elements have more than one valency whereas polyatomic ions have more than one atom that are covalently bonded to each other.

The valency of carbon in methane (CH₄) is Four.

Valency is simply defined and is equal to the number of electrons gained, lost or shared by an atom of an element to achieve the nearest Nobel gas configuration which is completing eight, eighteen etc. electrons in its last shell.

The number of atoms of other elements with which one atom of an element will combine is decided by the valency of that element.

In the given question, as carbon has four valence electrons in its last shell so its valency becomes four.

Similarly, If you were asked to find the valency of hydrogen in CH4 you can tell that it is one because it has one electron placed in its last shell.

Learn more about Valence electrons here:

https://brainly.com/question/12744547

#SPJ4

Methane is a chemical molecule with the molecular formula CH4 (one carbon atom bound to four hydrogen atoms; pronounced MEH-thayn in the US and MEE-thayn in the UK).

Methane, pronounced MEH-thayn in the US and MEE-thayn in the UK, is a chemical substance having the formula CH4 (one carbon atom bonded to four hydrogen atoms). The simplest alkane and the primary component of natural gas, it is a group-14 hydride. Methane is a fuel that is commercially appealing due to its relative abundance on Earth, but its gaseous state under normal temperature and pressure makes its capture and storage difficult. Methane is a naturally occurring gas that is produced by both geological and biological processes. It can be found underground and under the seafloor. 

Learn more about Methane here:

https://brainly.com/question/2127750

#SPJ4

Answer:

Explanation:

The statement "Earth is the third planet from the sun" is a scientific fact that is widely accepted in the scientific community. However, it is an insignificant claim because it does not provide any new information or understanding about Earth or our solar system. It is also a well-known fact that can be easily verified by reference to basic astronomical knowledge and observations. It is not a new discovery, nor does it contribute to any scientific advancement or understanding.

The number of chlorine atoms that are present in Ferric chloride are B. 3.

The molecular formula of iron chloride is FeCl3. It is composed of one iron atom and three chlorine atoms. The oxidation state of iron in this compound is +3. In an aqueous solution, this compound is basic or alkaline in nature. The primary use of ferric chloride is to remove impurities in water and for wastewater treatment.  It is a salt of weak base and a strong acid. It is prepared by treating anhydrous iron (III) chloride can be prepared by reacting metallic iron with dichloride.

Thus, the correct option is B i.e., 3 chlorine atoms are present in ferric chloride.

To learn more about molecular formula check the link below:

https://brainly.com/question/26388921

#SPJ4

Answer: 10 neutrons

Explanation: Fluorine-19 is composed of 9 protons, 10 neutrons, and 9 electrons. Its abundance is 100%; no other isotopes of fluorine exist in significant quantities.

✨

During the formation of a solution, the process of dissolving a solute in a solvent is always an exothermic process.

This is because the energy required to break down the solute's intermolecular bonds is greater than the energy released when the solute's particles are surrounded by the solvent particles. As a result, energy is released in the form of heat when the solute is dissolved in the solvent.

The heat released during a solution formation process is affected by several factors including the types of solute and solvent, the concentration of the solute, and temperature.

Learn more about exothermic process:

https://brainly.com/question/2924714

#SPJ4