Answer:
Electrons
Explanation:
8
A
Remains samo
Increases
Fluctuates
Decreases
9.
If the forward voltage in a diode is increased, the width of depletion region
Federal Board Past Board Paper 20/20
B
D.
The half life of 191 sr is 9.70 hours. What is decay constant?
A. 1.99x10 *s-
B
1.99x10's.'
D.
The ratio of minimum to maximum wavelength in Balmer series is:
A. 1/4
B.
5/9
D. 5/36
When a battery of cmf "E" and internal resistance "r" is connected across external
1.6x1045-1
1.69x 651
10
3/4
11
1
B.
D.
13.
B.
resistance R, the power consumed in R is max when T/R is
A. 1/2
C.
0
12.
A consequence of Einstein's theory of relativity is:
A.
moving clocks run more slowly than when they are at rest.
B moving rods are longer than when they are at rest.
light exhibits both wave and particle properties.
the laws of physics must appear the same to all observers moving with
uniforın velocity relative to each other.
If input power and output power of an electric motor are 540 W and 382 W
respectively. Then the efficiency is:
A. 100%
91%
C. 71%
D. 51%
14.
A wire has a resistance of 121. It is bent in the form of a circle. The effective
resistance between the two points on any diameter of the circle is:
A. 12Ω
2412
C. 612
D. 302
15.
The constant a of a transistor is 0.95. What would be the change in the collector
current corresponding to a charge of 0.4 mA in the base current in common-
emitter arrangement?
A. 8.6 mA
B. 7.6 mA
C. 10.6 mA
D. 10 mA
B.
16.
The velocity at which the relativistic length of a body reduces to half of its
original length is:
A. V =
B. V =
узс
C. V
D.
V =
2
3c
2
2
C
17.
The speed of electrons in 2nd Bohr orbit is:
A. 1.095 x106m/s
B.
C. 2.19 x 108m/s
D.
1.92 x106m/s
13.6 x107m/s.
Answer:
i need more
Explanation:
i need more
For this program you will build a simple dice game called Pig. In this version of Pig, two players alternate turns. Players each begin the game with a score of 0. During a turn a player will roll a six-sided die one or more times, summing up the resulting rolls. At the end of the player's turn the sum for that turn is added to the player's total game score If at any time a player rolls a 1, the player's turn immediately ends and he/she earns O points for that turn (i.e. nothing is added to the player's total game score). This is called "pig". After every roll that isn't a 1, the player may choose to either end the turn, adding the sum from the current turn to his/her total game score, or roll again in an attempt to increase the sum. The first player to 50 points wins the game
Details
Open a text editor and create a new file called pig.py. In the file
Write a function called print_scores that has four parameters - these hold, in this order, the name of the first player (a string), his/her score (an int), the second player's name (a string), and score (an int).
The function will
Print the following message, using the current parameter values for the player names and scores (NOT necessarily Ziggy, 18, Elmer, and 23) -SCORES Ziggy:18 Elmer 23--
Print an empty line before this line
There is a single tab between SCORES and the name of player 1 .
There is a single tab between player 1's score and player 2's name .
Every other gap is a single space
Answer:
In Python:
import random
p1name = input("Player 1: "); p2name = input("Player 2: ")
p1score = 0; p2score = 0
playerTurn = 1
print(p1name+" starts the game")
roll = True
while(roll):
if playerTurn == 1:
p1 = random.randint(1,6)
print(p1name+"'s roll: "+str(p1))
if p1 == 1:
playerTurn = 2
roll = True
else:
p1score+=p1
another = input("Another Roll (y/n): ")
if another == "y" or another == "Y":
roll = True
else:
playerTurn = 2
roll = True
else:
p2 = random.randint(1,6)
print(p2name+"'s roll: "+str(p2))
if p2 == 1:
playerTurn = 1
roll = True
else:
p2score+=p2
another = input("Another Roll (y/n): ")
if another == "y" or another == "Y":
roll = True
else:
playerTurn = 1
roll = True
if p1score >= 50 or p2score >= 50:
roll = False
print(p1name+":\t"+str(p1score)+"\t"+p2name+":\t"+str(p2score))
Explanation:
Note that the dice rolling is simulated using random number whose interval is between 1 and 6
This imports the random module
import random
This line gets the name of both players
p1name = input("Player 1: "); p2name = input("Player 2: ")
This line initializes the scores of both players to 0
p1score = 0; p2score = 0
This sets the first play to player 1
playerTurn = 1
This prints the name of player 1 to begin the game
print(p1name+" starts the game")
This boolean variable roll is set to True.
roll = True
Until roll is updated to False, the following while loop will be repeated
while(roll):
If player turn is 1
if playerTurn == 1:
This rolls the dice
p1 = random.randint(1,6)
This prints the outcome of the roll
print(p1name+"'s roll: "+str(p1))
If the outcome is 1, the turn is passed to player 2
if p1 == 1:
playerTurn = 2
roll = True
If otherwise
else:
Player 1 score is updated
p1score+=p1
This asks if player 1 will take another turn
another = input("Another Roll (y/n): ")
If yes, the player takes a turn. The turn is passed to player 2, if otherwise
if another == "y" or another == "Y":
roll = True
else:
playerTurn = 2
roll = True
If player turn is 2
else:
This rolls the dice
p2 = random.randint(1,6)
This prints the outcome of the roll
print(p2name+"'s roll: "+str(p2))
If the outcome is 1, the turn is passed to player 1
if p2 == 1:
playerTurn = 1
roll = True
If otherwise
else:
Player 2 score is updated
p2score+=p2
This asks if player 2 will take another turn
another = input("Another Roll (y/n): ")
If yes, the player takes a turn. The turn is passed to player 1, if otherwise
if another == "y" or another == "Y":
roll = True
else:
playerTurn = 1
roll = True
If either of both players has scored 50 or above
if p1score >= 50 or p2score >= 50:
roll is updated to False i.e. the loop ends
roll = False
This prints the name and scores of each player
print(p1name+":\t"+str(p1score)+"\t"+p2name+":\t"+str(p2score))
8.6 Code Practice: Question 2
Instructions
Copy and paste your code from the previous code practice. If you did not successfully complete it yet, please do that first before
completing this code practice.
ate
After your program has prompted the user for how many values should be in the array, generated those values, and printed the
whole list, create and call a new function named sumarray. In this method, accept the array as the parameter. Inside, you should
sum together all values and then return that value back to the original method call. Finally, print that sum of values.
Sample Run
How many values to add to the array:
8
[17, 99, 54, 88, 55, 47, 11, 97]
Total 468
Answer:
In Java:
import java.util.*;
public class Main{
public static int sumArray(int []arr, int lent){
int sum = 0;
for(int i = 0; i<lent; i++){
sum+=arr[i];
}
return sum; }
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
System.out.print("Number of elements: ");
int lent = input.nextInt();
Random rd = new Random();
int [] intArray = new int[lent];
for(int i = 0; i< lent; i++){
intArray[i] = rd.nextInt(100)+1;
}
System.out.print("Total: "+sumArray(intArray,lent));
}
}
Explanation:
No previous code was provided; So, I had to write the program from scratch (in Java)
Also, the elements of the array were generated randomly
See attachment for program source file where I used comments for explanatory purpose.
Write a function called combineArrays(int[], int, int[], int) that accepts in two arrays of ints and the size of the arrays as parameters. The function should then create a new array that is the size of both array combined. The function should copy the elements from the first array into the new array, followed by all the elements from the second array. So if the initial array is {1,2,3,4,5} and the second arrray is {10,20,30} then the new array will be size 8 and contain {1,2,3,4,5,10,20,30}. Then in your main(), create two arrays of different sizes, each at least size 10, and fill them with integers's. Run the arrays through your function created above and print out all three arrays to demonstrate that the concatenation method worked. Then run your method again using the same two original arrays, but in the other order. So if the first time you did array a then array b, the second time do array b then array a. Make sure to delete the new arrays before closing your program.
Answer:
The function in C++ is as follows:
void combineArrays(int arr1[], int len1, int arr2[], int len2){
int* arr = new int[len1+len2];
for(int i =0;i<len1;i++){
arr[i] = arr1[i]; }
for(int i =0;i<len2;i++){
arr[len1+i] = arr2[i]; }
for(int i=0;i<len1+len2;i++){
cout<<arr[i]<<" "; }
delete[] arr; }
Explanation:
This defines the function
void combineArrays(int arr1[], int len1, int arr2[], int len2){
This creates a new array
int* arr = new int[len1+len2];
This iterates through the first array.
for(int i =0;i<len1;i++){
The elements of the first array is entered into the new array
arr[i] = arr1[i]; }
This iterates through the second array.
for(int i =0;i<len2;i++){
The elements of the second array is entered into the new array
arr[len1+i] = arr2[i]; }
This iterates through the new array
for(int i=0;i<len1+len2;i++){
This prints the new array
cout<<arr[i]<<" "; }
This deletes the new array
delete[] arr; }
See attachment for complete program which includes the main
ROCK-PAPER-SCISSORS Write a program that plays the popular game of rock-paper-scissors. (A rock breaks scissors, paper covers rock, and scissors cut paper). The program has two players and prompts the users to enter rock, paper or scissors. Your program does not have to produce any color. The color is there just to show you what your program should be inputting and outputting. The writing in blue represents output and writing in red represents input. Here are some sample runs:
Answer:
In Python
print("Instruction: 1. Rock, 2. Paper or 3. Scissors: ")
p1 = int(input("Player 1: "))
p2 = int(input("Player 2: "))
if p1 == p2:
print("Tie")
else:
if p1 == 1: # Rock
if p2 == 2: #Paper
print("P2 wins! Paper covers Rock")
else: #Scissors
print("P1 wins! Rock smashes Scissors")
elif p1 == 2: #Paper
if p2 == 1: #Rock
print("P1 wins! Paper covers Rock")
else: #Scissors
print("P2 wins! Scissors cuts Paper")
elif p1 == 3: #Scissors
if p2 == 1: #Rock
print("P2 wins! Rock smashes Scissors")
else: #Paper
print("P1 wins! Scissors cuts Paper")
Explanation:
This prints the game instruction
print("Instruction: 1. Rock, 2. Paper or 3. Scissors: ")
The next two lines get input from the user
p1 = int(input("Player 1: "))
p2 = int(input("Player 2: "))
If both input are the same, then there is a tie
if p1 == p2:
print("Tie")
If otherwise
else:
The following is executed if P1 selects rock
if p1 == 1: # Rock
If P2 selects paper, then P2 wins
if p2 == 2: #Paper
print("P2 wins! Paper covers Rock")
If P2 selects scissors, then P1 wins
else: #Scissors
print("P1 wins! Rock smashes Scissors")
The following is executed if P1 selects paper
elif p1 == 2: #Paper
If P2 selects rock, then P1 wins
if p2 == 1: #Rock
print("P1 wins! Paper covers Rock")
If P2 selects scissors, then P2 wins
else: #Scissors
print("P2 wins! Scissors cuts Paper")
The following is executed if P1 selects scissors
elif p1 == 3: #Scissors
If P2 selects rock, then P2 wins
if p2 == 1: #Rock
print("P2 wins! Rock smashes Scissors")
If P2 selects paper, then P1 wins
else: #Paper
print("P1 wins! Scissors cuts Paper")
Suzanne is following a fad diet. She has started to experience low energy during her workouts, and on a recent trip to the doctor, she found out she has high cholesterol. Which fad diet is Suzanne most likely following?
Answer:
Hi mate....
Explanation:
This is ur answer....
--> Suzanne just facing low carbohydrates....
hope it helps you,
mark me as the brainliest pls....
Follow me!
Answer:
A.
low-carbohydrate
Explanation:
write a BASIC program to find the product of any two numbers
Answer:
Print 4 + 4
Explanation:
If you're writing this in the programming language called BASIC, this is how you would add any two numbers.
Consider an allocator on a 32-bit system that uses an implicit free list. Each memory block, either allocated or free, has a size that is a multiple of four bytes. Thus, only the 30 higher order bits in the header and footer are needed to record block size, which includes the header and footer and is represented in units of bytes. The usage of the remaining 2 lower order bits is as follows: bit 0 indicates the use of the current block: 1 for allocated, 0 for free. bit 1 indicates the use of the previous adjacent block: 1 for allocated, 0 for free Below is a helper routine defined to facilitate the implementation of free (void *P). Which option, if any, will complete the routine so that it performs the function properly?\
Note: "size" in the answers indicates the size of the entire block /* given a pointer to a valid block header or footer, returns the size of the block */
int size(void *hp)
{
int result;
__________;
return result;
}
1. result=(*(int *)hp)&(-7)
2. result=((*(char *)hp)&(-5))<<2
3. result=(*(int *)hp)&(-3)
4. result=(*hp)&(-7)
5. None of these
Answer:
result=(*(int *)hp)&(-3)
Explanation:
The result above would release the pointer or address of the integer data type with 3 memory blocks needed by the allocator.
1 #include 2 3 int max2(int x, int y) { 4 int result = y; 5 if (x > y) { 6 result = x; 7 } 8 return result; 9 } 10 11 int max3(int x, int y, int z) { 12 return max2(max2(x,y),z); 13 } 14 15 int main() { 16 int a = 5, b = 7, c = 3; 17 18 printf("%d\n",max3(a, b, c)); 19 20 printf("\n\n"); 21 return 0; 22 } What number is printed when the program is run?
Answer:
7
Explanation:
#include <stdio.h>
int max2(int x, int y) {
int result = y;
if (x > y) {
result = x;
}
return result;
}
int max3(int x, int y, int z) {
return max2(max2(x,y),z);
}
int main() {
int a = 5, b = 7, c = 3;
printf("%d",max3(a, b, c));
printf("");
return 0;
}
Hi, first of all, next time you post the question, it would be nice to copy and paste like above. This will help us to read the code easily. Thanks for your cooperation.
We start from the main function:
The variables are initialized → a = 5, b = 7, c = 3
max3 function is called with previous variables and the result is printed → printf("%d",max3(a, b, c));
We go to the max3 function:
It takes 3 integers as parameters and returns the result of → max2(max2(x,y),z)
Note that max2 function is called two times here (One call is in another call actually. That is why we need to first evaluate the inner one and use the result of that as first parameter for the outer call)
We go to the max2 function:
It takes 2 integers as parameters. If the first one is greater than the second one, it returns first one. Otherwise, it returns the second one.
First we deal with the inner call. max2(x,y) is max2(5,7) and the it returns 7.
Now, we need to take care the outer call max2(7, z) is max2(7, 3) and it returns 7 again.
Thus, the program prints 7.
What information is required for a complete citation of a website source?
the title, volume number, and page numbers
the responsible person or organization and the website URL
the responsible person or organization, date accessed, and URL
the responsible person or organization and the date accessed
Answer:
I believe that the answer is C.
Explanation:
Answer:
think the answer is:
the responsible person or organization, date accessed, and URL
Explanation:
have a nice day
______________ is a raw fact about a person or an object
Question 1 options:
File
Lookup wizard
Information
Data
Write a program that asks the user to guess the next roll of a six-sided die. Each guess costs $ 1. If they guess correctly, they get $ 100.00. The player will start out with a $10.00 bank. Each time he (or she) guesses incorrectly you will subtract $1.00 from their bank. Each time they guess correctly, you add $10.00 to their bank. Print the total winnings or losses at the end of the game. You can simulate the toss of the dice using the RandomRange function (Don't forget to Randomize).
Answer in python:
import random
money = 10
winnings = 0
def main():
global winnings
global money
dice_num = random.randrange(1,6)
input_str = "Guess the dice number. You have $"+str(money)+" > "
input_num = input(input_str)
if int(input_num) == dice_num:
money = money + 10
winnings = winnings + 10
else:
money = money - 1
if money < 0:
print("You lose. You won "+str(winnings)+" times. Press enter to try again")
useless_variable = input()
main()
else:
main()
main()
Explanation:
Which search strategy is most similar to greedy search?
A.
depth-first search
B.
breadth-first search
C.
bidirectional search
D.
uniform-cost search
Answer:
I think the answer would be A.
Explanation:
If I'm wrong plz let me know (I think I may be wrong)
In this assignment we are going to practice reading from a file and writing the results of your program into a file. We are going to write a program to help Professor X automate the grade calculation for a course. Professor X has a data file that contains one line for each student in the course. The students name is the first thing on each line, followed by some tests scores. The number of scores might be different for each student. Here is an example of what a typical data file may look like: Joe 10 15 20 30 40 Bill 23 16 19 22 Sue 8 22 17 14 32 17 24 21 2 9 11 17 Grace 12 28 21 45 26 10 John 14 32 25 16 89 Program details Write a program that: Ask the user to enter the name of the data file. Read the data from the file and for each student calculate the total of the test scores, how many tests the student took, and the average of the test scores. Save the results in an output file (e.g. stats.txt) in the following order: studentName totalScore numberOfTests testAverage Note that the average is saved with 2 decimal places after the decimal point. Validation: Make sure your program does not crash if a file is not found or cannot be open.
Answer:
In Python:
import os.path
from os import path
fname = input("Filename: ")
if path.exists(fname):
with open(fname) as file_in:
lines = []
for line in file_in:
lines.append(line.rstrip('\n'))
f = open("stat.txt","r+")
f.truncate(0)
f = open("stat.txt", "a")
f.write("Names\tTotal\tSubjects\tAverage\n")
for i in range(len(lines)):
rowsum = 0; count = 0
nm = lines[i].split()
for j in nm:
if (j.isdecimal()):
count+=1
rowsum+=int(j)
average = rowsum/count
f.write(nm[0]+"\t %3d\t %2d\t\t %.2f\n" % (rowsum, count, average))
f.close()
else:
print("File does not exist")
Explanation:
See attachment for explanation where comments were used to explain each line
For each student, the sum of the marks, total tests were taken and the average of marks is calculated and is stored in an output file, for example, stats.txt.
Python Code:The code in Python asks the user for an input file name. If the input file is not found an error is printed else the data in the file is processed further.
Try:
# take input file name
file = input('Enter name of the data file: ')
# open the input file
ip = open(file, 'r')
# store the lines from input file in a list
lines = ip.readlines()
# close the file
ip.close()
# open the output file
op = open('stats.txt', 'w')
# iterate over each line
for line in lines:
# split data using space as delimiter
data = line.split()
# get name
name = data[0]
# get marks and convert them to integer
marks = list(map(int, data[1:]))
# get sum of marks
total = sum(marks)
# get number of tests
length = len(marks)
# calculate average of marks
avg = total/length
# add the data to output file
op.write('{} {} {} {:.2f}\n'.format(name, total, length, avg))
# close the output file
op.close()
print('Stats have been save in the output file')
# catch FileNotFoundError
except FileNotFoundError:
# print error
print('Error: that file does not exist. Try again.')
Learn more about the topic python code:
https://brainly.com/question/14492046
Extend the class linkedListType by adding the following operations: Write a function that returns the info of the kth element of the linked list. If no such element exists, terminate the program. Write a function that deletes the kth element of the linked list. If no such element exists, terminate the program.
Answer:
Explanation:
The following code is written in Java. Both functions traverse the linkedlist, until it reaches the desired index and either returns that value or deletes it. If no value is found the function terminates.
public int GetNth(int index)
{
Node current = head;
int count = 0;
while (current != null)
{
if (count == index)
return current.data;
count++;
current = current.next;
}
assert (false);
return 0;
}
public int removeNth(int index)
{
Node current = head;
int count = 0;
while (current != null)
{
if (count == index)
return current.remove;
count++;
current = current.next;
}
assert (false);
return 0;
}
A low price point is an example of a ________. Choose one.
Answer:
of a bad product
Explanation:
In ……………cell reference, the reference of a cell does not change.
Answer:
In absolute cell reference, the reference of a cell does not change.
Which story element refers to the way the story unfolds?
A.
premise
B.
back story
C.
synopsis
D.
plot
Answer:
D. Plot
Explanation:
The plot is how the story develops, unfolds and move through time.
- A blacksmith is shoeing a miser's horse. The blacksmith charges ten dollars for his work. The miser refuses to pay. "Very well", says the blacksmith, "there are eight nails in each horseshoe. The horse has four shoes. There are 32 nails in all. I will ask you to pay one penny for the first nail, two pennies for the next nail, four pennies for the next nail, eight pennies for the next nail, sixteen pennies for the next, etc. until the 32nd nail". How much does the miser have to pay?
Answer:
1+ 2^31= 2,146,483,649 pennies.
in Dollars- $21,464,836.49
edit for total=
42, 929,672. 97
Explanation:
,
Which of these describes a database? Check all of the boxes that apply.
is used to perform complex calculations
is a dynamic tool for analyzing related information
is a tool for analyzing raw data
is a way to store, retrieve, manage, and analyze data
Answer:
The answer is 2,3,4 and the next one is 1,2 and 4
Explanation:
Just did it
EDG 2021
Answer:
first part is 2,3,4
second part is 2,4,5
Explanation:
Which of the following is a/are view/views to display a table in Access?
Question 5 options:
Datasheet view
Design view
Both A and B
None of the above
Answer:Both A and B
Explanation:
Complete the function favoriteFlower(). Note that the program will not run as is because the function is incomplete. The purpose of the function is to determine if the given flower is in the top three of my favorite flowers. The starter file defines a list of favorite flowers that is ordered most favorite to least favorite. Please pass the flower name and the flower list as arguments in the function. The expected output is:
Answer:
What Language? Once you respond with a comment, I will be happy to write the code for you. I write code 24/7 (Because I have nothing better to do), so I will wait for you to comment. Also is there any pre-existing code?
Explanation:
what is the correct process for setting up a recurring project for the same client in qbo accountant?
Answer:
The answer is below
Explanation:
The correct process for setting up a recurring project for the same client in Quickbooks Online Accountant is as follows:
1. Go to Work, then select create a project
2. Select the Repeat button, then set the frequency and duration
3. Formulate the project and save it.
4. Reopen the project
5. And select the Duplicate button for the proportion of times you want it to recur. This includes assigning the interval, day of the recurrence, and end time.
6. Then select Save.
Firstly, invent a separate project, then pick the repeat button on the right of the screen, specify the frequency and duration. Its frequency can indeed be weekly, biweekly, monthly, and so on.
This project's duration must be determined. This step saves the user time when working on a project. Otherwise, the same actions would have to be done again and over, which would be time-consuming and repetitive.New project and click the continue option to start the process of preparing a recurring project for the same client.This second alternative is not the best method to create a recurring project for the same client. Based on the phase, the initiatives can be generated as many times as necessary.Therefore, the answer is "first choice".
Learn more:
brainly.com/question/24356450
Write a C++ program to calculate the course score of CSC 126. 1. A student can enter scores of 3 quizzes, 2 exams, and a final exam. The professor usually keeps 1 digit after the point in each score but the overall course score has no decimal places. 2. The lowest quiz score will not be calculated in the quiz average. 3. The weight of each score is: quiz 20%, exams 30%, and the final 50%. 4. The program will return the weighted average score and a letter grade to the student. 5. A: 91 - 100, B: 81 - 90, C: 70 - 80, F: < 70.
Answer:
In C++:
#include <iostream>
using namespace std;
int main(){
double quiz1, quiz2, quiz3, exam1, exam2, finalexam,quiz;
cout<<"Quiz 1: "; cin>>quiz1;
cout<<"Quiz 2: "; cin>>quiz2;
cout<<"Quiz 3: "; cin>>quiz3;
cout<<"Exam 1: "; cin>>exam1;
cout<<"Exam 2: "; cin>>exam2;
cout<<"Final Exam: "; cin>>finalexam;
if(quiz1<=quiz2 && quiz1 <= quiz3){ quiz=(quiz2+quiz3)/2; }
else if(quiz2<=quiz1 && quiz2 <= quiz3){ quiz=(quiz1+quiz3)/2; }
else{ quiz=(quiz1+quiz2)/2; }
int weight = 0.20 * quiz + 0.30 * ((exam1 + exam2)/2) + 0.50 * finalexam;
cout<<"Average Weight: "<<weight<<endl;
if(weight>=91 && weight<=100){ cout<<"Letter Grade: A"; }
else if(weight>=81 && weight<=90){ cout<<"Letter Grade: B"; }
else if(weight>=70 && weight<=80){ cout<<"Letter Grade: C"; }
else{ cout<<"Letter Grade: F"; }
return 0;
}
Explanation:
See attachment for complete program where comments were used to explain difficult lines
why must a satellite have distinct uplink and downlink frequencies.
Answer:
The reason that a satellite must have a distinct uplink and downlink set of frequencies is because they help avoid any type of interference that may occur. The uplink receives the signal and amplifies it so that it can be transmitted to another frequency (downlink).
is technology oversold
Answer:
no
Explanation:
Answer:
no
Explanation:
if u can still pay for using phones, computers, etc. then we will still have technology
Arrange the computers in the order fastest to slowest: Minicomputer, Supercomputer, Personal Computer and Mainframe.
Answer:
supercomputer, mainframe, personal computer, minicomputer
Explanation:
Immersive Reader
We don't have to call our function f every time; create a function called times-ten that should take a parameter x and return x * 10. Once you've created the function, run times-ten(50).
Input Output
1 10
12 120
31 310
50 500
Answer:
1 10
6yx
Explanation:
Complete the sentences describing a computer innovation.
Software and technology that allow people to work together on a task are known as ____?
Answer:
Collaboration
Answer:
Software and technology that allow people to work together on a task are known as collaboration tools
Explanation:
b or c isn't the best answer