In the Introductory Activity, the developing solvents were 2% sodium chloride aqueous solution and 2% isopropyl alcohol aqueous solution. Draw separate molecular diagrams of how sodium chloride and isopropyl alcohol would interact in water. Identify the types of intermolecular attrac- tions within each diagram.

4.44 g of carbon dioxide is produced Sodium bicarbonate reacts with hydrochloric acid in a gas-forming reaction.

The question provides us with a balanced chemical reaction and the masses of our reactants  [tex]NaHCO_{3}[/tex] (8.28 g) and HCl (5.22 g). As we do not know which is the limiting reactant, we will start by converting the masses of both reactants to moles:

n = [tex]\frac{m}{M}[/tex]

Where, n = moles; m = mass; M = molar mass

The molar masses of [tex]NaHCO_{3}[/tex] and HCl are obtained by adding the atomic masses of each atom. The atomic masses are obtained from the periodic table:

[tex]M_{ NaHCO_{3} }[/tex] = (22.99g/mol)+(1.01g/mo)+(12.01g/mol)+(3×16.00g/mol)          

              =84.01g/mol

[tex]M_{HCL}[/tex] = (1.01g/mol)+(45.45g/mol)

         =46.46g/mol

Now we can substitute the values in and solve:

[tex]n_{NaHCO_{3} }[/tex] = [tex]\frac{m}{M}[/tex] = [tex]\frac{8.28g}{ 84.01g/mol }[/tex]

               = 0.958 mol

[tex]n_{HCL}[/tex] = [tex]\frac{m}{M}[/tex] = [tex]\frac{5.22g}{46.46g/mol}[/tex]

          =0.112 mol

Next we will calculate the theoretical yield (in moles) of carbon dioxide from each reactant. In the process we will also determine the limiting reactant.

0.1 mol [tex]NaHCO_{3}[/tex] × [tex]\frac{1molCO2}{1molNaHCO3}[/tex] = 0.985 mol [tex]CO_{2}[/tex]

0.112 mol HCl× [tex]\frac{1molCO2}{1molHCL}[/tex] =0.112 mol [tex]CO_{2}[/tex]

From the results we can see the limiting reactant is

 [tex]NaHCO_{3}[/tex] as it produces less [tex]CO_{2}[/tex]. As the limiting reactant determines the theoretical yield, this means 0.1 mol of [tex]CO_{2}[/tex] will be produced. To determine the mass of [tex]CO_{2}[/tex]

we will rearrange the formula we used earlier with the molar mass of [tex]CO_{2}[/tex].

[tex]M_{CO_{2} }[/tex] = 12.01g/mol + (2×16.00g/mol) = 44.01g/mol

m = [tex]\frac{n}{M}[/tex] = (0.958 mol)(44.01g/mol)=4.44 g

Therefore 4.44 g of carbon dioxide is produced

To know more about Chemical reaction visit here ; https://brainly.com/question/22817140?referrer=searchResults

#SPJ4

The gas chromatograph (g.c.) that you will be using employs a flame ionization detector and needs two gases, helium, and hydrogen. The carrier gas, which differs depending on the type of GC being utilized, is crucial. The carrier gas must be inert chemically, dry, and oxygen-free.

Polar chemicals, such as butanol, will be absorbed on the column and move slowly if we employ the polar stationary phase. If they are polar, they will flow slowly, but non-polar chemicals, such as hexane, will move quickly. Given that they will move quickly, this is for the polar stationary base. The scenario will be entirely reversed when the polar non-polar stationary column is present, hence in the non-polar stationary situation. The order will be reversed, causing polar and non-polar molecules to migrate quickly. They'll start by absorbing a lot of energy.

An analytical tool used in science to evaluate analytes in a gas stream is called a flame ionization detector (FID). It is commonly employed in gas chromatography as a detector. This is a mass-sensitive instrument since it measures the number of ions per unit of time. With the right hydrogen generator, a hydrogen carrier may be produced from water on demand and offers a larger range of optimal linear velocities or flows than helium. It is also less expensive. With FID, it is simple to adjust for the additional hydrogen carrier gas by lowering the detector hydrogen flow in proportion.

To learn more about flame ionization detector, refer:-

https://brainly.com/question/15061968

#SPJ4

The number of atoms in a 27.5-gram zinc ring compared to the number in a nickel ring of the same mass contains 1.08 times more atoms than 27.5g of zinc.

You need to convert the masses of zinc and nickel to no. of moles by using

Moles = mass/Relative Atomic Mass

Then you can calculate the number of atoms knowing that 1 mole of any substance contains the Avogadro Constant number of particles (atoms or molecules usually).

So , no. if moles of zinc = 27.5g/65.3

= 0.42 moles.

Since 1 mole contains 6.023 x 10²³ atoms, then 0.15 mole contains (6.023 * 10²³) x 0.42 atoms

= 2.5 10²³ atoms.

Similarly for nickel, no. of moles = 27.5/ 58.6

= 0.46 moles.

This contains (6.023 x 10²³) x 0.46 atoms.

= 2.7 x 10²³ atoms.

So 27.5g of nickel contains 2.7 x 10²³/ 2.5x 10²³ more atoms than 27.5g of zinc.

Thus, 27.5 g nickel contains 1.08 x more atoms than 27.5g of zinc.

To learn more about number of atoms refer- https://brainly.com/question/441927

#SPJ4

The empirical formula for a substance that is 12.67 % aluminum, 19.73% nitrogen, 67.60% oxygen is Al(NO₃)₃.

given that :

aluminum = 12.67 %  = 12.67 g

nitrogen = 19.73 % = 19.73 g

oxygen = 67.60 % = 67.60 g

molar mass of aluminum = 12.67 / 26.98

                                         = 0.46 mol

molar mass of nitrogen = 19.73 / 14

                                       = 1.40 mol

molar mass of oxygen = 67.60 / 16

                                      = 4.2 mol

divided by the smallest one , we get:

aluminum = 0.46 / 0.46 = 1

nitrogen = 1.40 / 0.46 = 3

oxygen = 4.2 / 0.46 = 9

The empirical formula is = Al(NO₃)₃

To learn more about empirical formula here

https://brainly.com/question/14462365

#SPJ4

The main risks associated with using auctions to source malic acid from Betapharm include quality risk, price risk, delivery risk, and contractual risk.

1. Quality Control: Betapharm's malic acid was of a lower quality than expected, leading to product recalls and customer complaints. This could lead to financial losses and/or damage to Betapharm's reputation.

2. Price Risk: As the auction process is unpredictable, Betapharm may end up paying more than expected or receive a lower quality of malic acid than expected. This could lead to financial losses and/or damage to Betapharm's reputation.

3. Delivery Risk: Betapharm may not receive the malic acid on time, leading to delays in production and financial losses.

4. Contractual Risk: Betapharm may not have a clear contract in place with the supplier, leading to disputes and potential financial losses.

To know more about malic acid, click below:

https://brainly.com/question/27187666

#SPJ4

The amount of hcl is 0.0432 M. A neutralizing reaction happens after the acid and base are allowed to mix.

What happens during neutralization?

When an acid and a base come together, neutralization takes place, raising the pH to roughly 7. When lime is added to acidic soil to cure and relieve indigestion, for example, it is a practical practice that is used every day. Additionally, neutralization causes an alkali's pH to decrease to around seven.

Which specific neutralization can you cite?

Ans: A neutralizing reaction has numerous uses in daily life. For instance, antacid tablets, which have a fundamental ingredient, help balance gastric acidity. The neutralizing reaction helps to prevent tooth decay in a manner similar to that

Briefing:

volume of NaOH = 54 mL / 1000 = 0.054 L

Molarity NaOH = 0.1 M

Number of moles NaOH :

n = M * v

n = 0.1 * 0.054

n = 0.0054 moles of NaOH

Finally we calculate the number of moles of HCl in the solution from the stoichiometry of the reaction :

HCl + NaOH = NaCl + H₂O

1 mole HCl -------- 1 mole NaOH

?moles HCl ------- 0.0054 moles  NaOH

moles HCl = 0.0054 * 1 /1

= 0.0054 moles of HCl

Volume of HCl = 125 mL / 1000 = 0.125 L

M ( HCl ) = n / V

M = 0.0054 / 0.125

= 0.0432 M

To know more about neutralization visit:

https://brainly.com/question/15347368

#SPJ4

It will take, 2.6×10²/ (50 days) for a sample of radon-218 to decay from 99 grams to 0. 50 grams.

What is Nuclear decay?

When an atom's nucleus is unstable and produces radiation on its own, this process is known as nuclear decay. In turn, one or more new elements' nuclei are formed from the original element's nucleus. These progeny nuclei are less energetically unstable and have a smaller mass than their parent nuclei.

For instance, uranium-238 emits an alpha particle as it decays into thorium-234.

Therefore, It will take, 2.6×10²/ (50 days) for a sample of radon-218 to decay from 99 grams to 0. 50 grams.

To learn more about Nuclear decay

Here: https://brainly.com/question/5675819

#SPJ4

An example correctly describing explicit evidence supporting epigenetic traits as heritable is DNA methylation.

The epigenome can be impacted by environmental factors like a person's nutrition and exposure to contaminants. When cells divide, epigenetic alterations can be preserved from cell to cell and, in some situations, passed down through the generations. DNA methylation is a frequent epigenetic alteration type.

DNA methylation is an epigenetic modification, meaning it affects DNA without changing its sequence in any way. It modifies a gene's expression during cell differentiation and brings about a heritable alteration. Other potential environmental stressors that can alter epigenetic status include chemical and xenobiotic compounds in water or the atmosphere.

To know more about epigenome, refer to the following link:

https://brainly.com/question/16319638

#SPJ4

The type of non-covalent interaction between the base pairing of a double helix of DNA molecule is hydrogen bonding.

The nucleic acids are categorized into two types that are as follows:

Deoxyribonucleic acid (DNA)

Ribonucleic acid (RNA)

The pairing of bases occurs in both RNA and DNA molecules. The bases that are present in DNA molecules are guanine, adenine, cytosine, and thymine while the bases that are present in RNA molecules are adenine, uracil, guanine, and cytosine.

In a DNA molecule, the pairing is done in a way that A is always paired with T, while G is paired with C and in RNA the base T is replaced by U. There exist hydrogen bonding between base pair and double helix of DNA molecule, they are weak bond and can be broken down easily.

To learn more about hydrogen bonding check the link below:

https://brainly.com/question/1420470

#SPJ4

Answer:

D. heat flows into the system and its internal energy increas

Explanation:

The question defines the system as the piece of gold.  The answer will depend on the gold's perspective of what is happening.  If we assume room temperature to be cooler than [tex]100^{o} C[/tex], then the gold will experience energy coming in until the tempeartures of both the water and gold are the same.  As heat flows into the gold, its internal energy will increase.  Option D seems to address both processes correctly.

It lowers the concentration of phosphate ions, shifting the balance to the left.

The maximum number of a chemical that will disintegrate in such a solvent at a given temperature is referred to as its solubility. Varying compounds have very high solubility, which is a characteristic of a particular solute-solvent pair.

The quantity of solute in one liters of a saturated solution, or solubility, is measured in grams. For instance, their solubility in water at 25 oC might be displayed as 12 g/L. The amount of solute per milliliter of saturated solution is measured by its molar solubility. As an illustration, positive and significant at 1 mol/L at 25 oC.

To know more about Solubility visit:

https://brainly.com/question/28170449

#SPJ4

The liquid will rise above the surrounding liquid due to the attractions when the adhesive forces are stronger than the cohesive forces between a liquid and the walls of a capillary tube.

In a mechanism known as capillary action, liquid flows up into very thin tubes made of rigid materials such as plastic or glass termed capillary tubing or capillary tubes (capillarity). A tube used to regulate the flow of refrigerant that has an interior diameter and length that are calibrated. Additionally, it links the remote bulb to the thermostat and/or the thermostatic expansion valve.

Surface tension is another factor that causes a liquid column inside of a tiny capillary tube to rise. (h)=2Trg is the formula for capillary rise.

Capillary action is exemplified by the uptake of water in porous materials like plaster and paper, the wicking of paint between brush hairs, and the transport of water through sand.

To know more about Capillary Tube visit:

https://brainly.com/question/13740803

#SPJ4

Answer:

Explanation:

its b

Yes, a reaction will occur when aqueous solutions of potassium chloride and silver(I) acetate are combined. The reaction is as follows:

2KCl + AgC2H3O2 → K2C2H3O2 + AgCl

This reaction occurs because when aqueous potassium chloride and silver(I) acetate are combined, the positively-charged ions in the two compounds interact. The positively-charged potassium ions are attracted to the negatively-charged acetate ions, and the positively-charged silver ions are attracted to the negatively-charged chloride ions. This interaction causes the two compounds to form a neutral salt, potassium acetate, and silver chloride, both of which are insoluble in water.

Are solutions in which the solvent is water. They are formed when a solute, such as a salt, sugar, or acid, is dissolved in water. Aqueous solutions are a common form of solution used in chemistry and are found in many everyday products, such as:

Learn more about aqueous solutions:

https://brainly.com/question/19587902

#SPJ4

One mole of Nitrogen gas will produce 2 moles of ammonia.

What is the purpose of ammonia?

Ammonia produced by industry is used as fertilizer in agriculture to the tune of 80%. In addition to these uses, ammonia is made into polymers, explosives, textiles, insecticides, dyes, and other chemicals. It is also used to purify water sources.

Can ammonia cause cancer?

Ammonia does not considered to be a cancer-causing substance. Ammonia has not been classified as carcinogenic by the EPA, the Department of Health and Human Services (DHHS), or the International Agency for Research on Cancer (IARC).

Briefing:

Hydrogen+Nitrogen→Ammonia

H2+N2-->NH3

Balancing the equation:

3H2+N2-->2NH3

So in an ideal 100% reaction

To know more about ammonia visit:

https://brainly.com/question/15409518

#SPJ4

Geometrical isomerism:- When two coordination compounds differ in the arrangement of their ligands in space around the central metal ion, they are said to be geometrical isomers.

What are geometrical isomers?

A geometric isomer is a type of stereoisomerism. It is also known as cis-trans isomerism. Geometric isomerism occurs due to the banned rotation about carbon-carbon double bonds or carbon-carbon single bonds in cyclic compounds.

Geometrical isomerism:- When two coordination compounds differ in the arrangement of their ligands in space around the central metal ion, they are said to be geometrical isomers.

To know more about geometrical isomers, visit:-

https://brainly.com/question/9064937

#SPJ4

As molecular weight and ionic character increase, boiling point rises as well. Due to its greater mass and ionic character compared to CS₂, CSe₂ has a higher boiling point.

A substance's boiling point is the temperature at which it changes from a liquid to a gaseous or vapor state, where the two states are in equilibrium.

The molecular weight, bond type, temperature, and pressure of a substance all affect its boiling point. The 16th group of the oxygen family is where sulfur S and selenium Se both belong.

The covalent character decreases and the molecular weight rises as you move down a group. Se is the heaviest element in the sixteenth group and has a higher molecular weight than the other elements in the group.

Se has a higher boiling point due to its more ionic nature as well. Therefore, CSe₂'s boiling point is higher than CSe₂'s due to its higher mass and ionic character.

To know more about boiling point visit:

https://brainly.com/question/8771335

#SPJ1

1. Graphite, liquid and diamond- The upper point where the lines connect is known as the upper triple point.

2. The "gas" phase of the diagram includes the intersection point, which is located at 100 atm and 6000 K. Therefore, at 100 atm and 6000K, the gas phase is stable.

3. The production of liquid carbon would include starting from the lower triple point by raising the temperature and pressure.

What is phase diagram?

A phase diagram depicts how a substance reacts to changes in temperature and pressure in a confined container. A potential system temperature and pressure combination is represented by each point in this graphic. The substance's solid, liquid, and gaseous states are represented by the three sections that make up the diagram.

To know more about the phase diagram, check out https://brainly.com/question/1612862

#SPJ4

The final temperature at which both become equal is 81.95°C.

What is Specific Heat?

The amount of heat needed to raise a substance's temperature by one degree Celsius in one gramme, also known as specific heat. Typically, calories or joules per gramme per degree Celsius are used as the units of specific heat. For instance, water has a specific heat of 1 calorie (or 4.186 joules) per gramme per degree Celsius.

The French scientists Pierre-Louis Dulong and Alexis-Thérèse Petit showed in the early 19th century that measurements of a substance's specific heat allow one to calculate their atomic weights.

   45x0.88x(X-24)=-180×4.184×(X-85)

   39.6X-950.4=-753.12X+64015.2

   792.72X=6495.6

     X=6495.6/792.72

     X=81.95°C

Learn more about Specific Heat from given link

https://brainly.com/question/27991746

#SPJ4

The concentration of acid when the vat is one-fourth full is 3%.

What is an acid?

The concentration of acid when the vat is one-fourth full can be expressed as a proportion of acid to the total volume of solution in the vat.

At the start, the vat contains 30 liters of a 5% acid solution. This means that 0.05 * 30 = 1.5 liters of acid is present.

As the solution is pumped out at 4 liters per second, and pure acid is pumped in at 3 liters per second, the total amount of acid in the vat is increasing at a rate of 3 liters per second.

At one-fourth full, the vat will contain 10 liters of solution (one-fourth of the original 40 liter volume).

To calculate the concentration of acid at this point, we need to calculate the total amount of acid present. Since the rate of increase of acid is 3 liters per second, after 10 seconds, the amount of acid present will be 3 * 10 = 30 liters.

Therefore, the concentration of acid when the vat is one-fourth full is 30/10 = 3%.

To know more about acid and bases, click the link given below:

https://brainly.com/question/14072179

#SPJ4

Calcium-40 would be expected to be particularly stable.

A nuclide is a type of atom distinguished by the number of protons and neutrons in its nucleus, which approximates the nuclide's mass. The number associated with the nuclide's name is known as its mass number (the total number of protons and neutrons in the nucleus).

The terms isotope and nuclide are closely related. When we talk about isotopes, we're talking about a group of nuclides that have the same number of protons. The term nuclide refers to a nuclear species that may or may not be isotopes of a single element. A nuclide is an atom with a specific number of protons and neutrons in its nucleus, such as carbon-13, which has 6 protons and 7 neutrons.

To learn more about nuclides, here

https://brainly.com/question/9826865

#SPJ4

If you evaporated all the water from this solution, you would receive 28 g and 3.4 g of salt; this is the quantity and concentration of a salt solution.

Are saline and salt water the same thing?

But the salt water found in the ocean is not the same as the bag of medicinal saline at the neighborhood hospital. Sodium chloride (table salt) and filtered water are used to make medical saline.

Can we consume salt water?

Seawater, in particular ocean water, contains a lot of salt and is not healthy to drink. Since we were designed to drink fresh water, drinking seawater can make us feel more dehydrated. In addition to making you thirstier, drinking salt water can seriously harm your body.

To know more about salt solution visit:

https://brainly.com/question/17594295

#SPJ4

The Born-Oppenheimer Approximation is the assumption that the electronic motion and the nuclear motion in molecules can be separated. It leads to a molecular wave function in terms of electron positions and nuclear positions.

This mainly involves the following assumptions:

The electronic wavefunction depends upon the nuclear positions but not upon their velocities, i.e., the nuclear motion is so much slower than electron motion that they can be considered to be fixed.

The nuclear motion sees a smeared-out potential from the speedy electrons.

If a Hamiltonian is separable into two or more terms, then the total eigenfunctions are products of the individual eigenfunctions of the separated Hamiltonian terms.

Associated with each measurable parameter in a physical system is a quantum mechanical operator and the operator associated with the system energy is called the Hamiltonian. The Hamiltonian contains the operations associated with the kinetic and potential energies.

Learn more about the Hamiltonian operator here:

https://brainly.com/question/13437682

#SPJ4

Concentration of the original ba(oh)₂ solution is 0.33 M.

What is Concentration?
Concentration in chemistry is defined as the quantity present in a mixture in excess of its total volume. It is possible to distinguish between the four different types of mathematical descriptions: mass concentration, molarity, number concentration, as well as volume concentration. The term "concentration" can be used to describe any type of chemical mixture, but it most often refers to the amount of solutes and solvents in a solution. Osmotic concentration and normal concentration are two variations of the molar (amount) concentration. The term "concentration" or an adjective like "dilute" for solutions with a low concentration as well as "concentrated" for solutions with a high concentration are frequently used in everyday, non-technical language to describe concentration in a qualitative manner.

Explanation:
Here, we have given two solution with their conc. and volume
So, formula used to calculate conc. is
M1V1 = M2V2  
let
M1 = molarity of ba(oh)2
V1 = volume of ba(oh)2 used
M2 = molarity of HNO 3
V2 = volume of HNO3 used
Now,
M1 X 35 = 0.35 x 33
M1 = 0.35 X 33 / 35
M1 = O.33

Hence, the concentration of ba(oh)2 is 0.33 M.

To learn more about Concentration
https://brainly.com/question/26255204
#SPJ4

A GC-MS produces muti data, including chromatograms for quantitative and qualitative analysis, mass spectra for confirming identity, identifying unknown analytes, and determining the structural and chemical properties of molecules.

The GCMS uses a standard, or a proportion of the component that has already been established and has also been measured on the GCMS, to quantify the concentration of each chemical in a sample.

On a chart known as a chromatogram, a peak for each substance that the GC separates is used to symbolize it. The number of peaks reflects the sample's concentration of separated components. Each peak's location reveals the retention time of the compound.

To know more about compounds visit :

https://brainly.com/question/14117795

#SPJ4

The only systems to conduct this reaction in a styrofoam cup are a drink in one with a lid and coffee in another with the lid closed.

We use Styrofoam cups because...

The best way to keep your drinks hot in the winter and chilled in the summer is in foam cups. Another useful industrial product is foam. In fact, foam products are used in most hospitals because they reduce contact with germs and other foodborne pathogens.

What exactly is a foam cup?

Styrofoam is a robust yet lightweight polystyrene (a form of plastic) foam. It's frequently used to create packing materials and coffee mugs for takeout. As a proprietary term, Styrofoam is typically capitalized. It is a form of lightweight,

To know more about styrofoam cup visit:

https://brainly.com/question/13945008

#SPJ4

The percent yield of this reaction is 53.05 %.

From the question, we have

Moles of carbon = 5.25/12.011 = 0.437

Mass of carbon dioxide formed = mole*molar mass

= 0.437 mol*44g/mol = 19.228 g.

Percent yield = 10.2/19.228*100%

=53.05%

The percent yield of this reaction is 53.05 %.

mass in physics, quantitative measure of inertia, a fundamental property of all matter. It is, in effect, the resistance that a body of matter offers to a change in its speed or position upon the application of a force.

To learn more about percentages, visit: brainly.com/question/25764815

#SPJ4

The acidic level of liter tank is 8%.

Principle -

Calculations-

So 10= 4 8V/100.

8V/100 = 10-4= 6.

V is therefore 6 x 100/8, 600/8, or 75 liters.

The percentage of acid decreases to 8% after adding 75 litres of water to the acid solution.

percent of acid in 125 liters of acid solution, which would contain 10 liters of pure acid.= 10/125 x 100 = 8%.

To learn about acidic level -

https://brainly.com/question/14263669

#SPJ4

Phenoby is supposed to tell others that, "Telling and giving understanding are two different things".

According to Phenoby mink is so valuable, but coon is not valuable, even though both are fur.

Janie implies that within a short period of time telling would be taken by people simply as passing sentence and would most likely will be forgotten.

On the other hand people's behavior can be changed to the better way of thinking by making people understand about the real fact.

Hence, Phenoby is supposed to say this to others.

Learn more about Phenoby from the link given below.

https://brainly.com/question/28560314

#SPJ4