As Jack pulls his wagon down the street it moves faster and faster. Jill, sitting a few meters ahead on the sidewalk, wants to slow Jack's wagon down so that it travels with a constant speed. How can Jill accomplish her goal? A) Push the wagon with a force greater than Jack. B) Push Jack away from the wagon so that he is no longer pulling it. C) Pull on the wagon in the opposite direction with twice Jack's force. D) Push the wagon in the opposite direction at a constant force less than Jack.
Answer:
The correct answer is NONE the two forces must be equal and of opposite direction, the closest answer is D
Explanation:
In this exercise it is indicated that Jack pushes a car, it is desired that Jill pushes the car so that the speed is constant
take as positive the direction of Jack's thrust
F_jack - F_jill = 0
F_jill = F_jack
therefore the push of the two must be equal and Jill's push must have the opposite direction to Jack's push.
The correct answer is NONE the two forces must be equal and of opposite direction, the closest answer is D
The smaller the mass of an object, the _____ its inertia
Answer:
larger
Explanation:
just trust me
The smaller the mass of an object, the smaller its inertia, because the inertia of any object is directly proportional to the mass of the object
What is inertia?The ability of an object to resist changes in motion is known as inertia. The amount of inertia is directly related to an object's mass; in fact, as we frequently observe, the heavier an object is, the harder it is to change its direction of motion.
A straightforward illustration: While it is relatively simple to stop a tennis ball that has been thrown in our direction, we are aware that it is more difficult to stop a large truck that is moving in the same direction at the same speed. This is because the truck has a much higher mass than the tennis ball and a higher moment of inertia. As a result, inertia rises as mass does.
Since the inertia of any object is directly proportional to its mass, the smaller its mass, the less inertia it will have.
Learn more about Inertia from here
https://brainly.com/question/1358512
#SPJ5
When an electron is removed from a neutral atom, it becomes....
A) A positive ion
B) a negative ion
C) heavier
D) a bipolar atom
Answer:
A
Explanation:
Consider again the civilization described in the previous question. (They live on a planet orbiting 10 AU from a close binary star system that consists of a 15 MSun red giant star and a 10 MSun black hole surrounded by an accretion disk.) Through a bizarre (and scientifically unexplainable) fluctuation in the space-time continuum, a copy of a book from that civilization arrives on your desk; it is entitled Iguoonos: How We Evolved. In the first chapter, you learn that these beings evolved from organisms that lived 5 billion years ago. Which of the following statements should you expect to find as you continue to read this book?
A. Their immediate ancestors were chimpanzees.
B. As a result of traumatic experiences to their evolutionary ancestors, they dislike television.
C. They evolved on a different planet in a different star system, and moved to their current location.
D. They evolved from primitive wormlike creatures that had 13 legs, 4 eyes, and bald heads, thus explaining why such critters are now considered a spectacular delicacy.
E. They believe that the presence of two stars in their system was critical to their evolution.
Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of:
Answer:
1 ohm
Explanation:
since there are two identical resistors, one resistor will be
R = [tex]\frac{4}{2}[/tex] =2ohm [ proven as in series [tex]R_{e} = 2 + 2 = 4ohm[/tex] ]
to calculate the equivalent resistance when in parallel:
[tex]\frac{1}{R_{e} } = \frac{1}{R_{1} } + \frac{1}{R_{2}}[/tex]
so,
[tex]\frac{1}{R_{e} } = \frac{1}{2} + \frac{1}{2}[/tex]
[tex]R_{e} = 1ohm[/tex]
Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of 1 ohm.
What is ohm?In a parallel circuit, voltage is thee same across each component in the circuit. The sum of the currents through each path is equal to the current from the source. However, the resistance cannot be added directly. It is calculated as:
1/Rt = 1/R1 + 1/R2 + 1/R3 1/Rt = 1/6.8 + 1/9.0 + 1/15
Rt = 3.08 ohms.
When resistors are connected in parallel, the equivalent resistance R will be less than the least resistance.
1/R = 1/R1 + 1/R2 + 1/R3 + 1/R4 + 1/R5
Since the 5 resistors are 10 ohms each, substitute them in to the formula
1/R = 1/10 + 1/10 +1/10 + 1/10 + 1/10
The LCM = 10
1/R = 5/10
Reciprocate both sides
R = 10/5 = 2 ohms
Therefore, Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of 1 ohm.
Learn more about equivalent resistance on:
https://brainly.com/question/13606415
#SPJ5
Two particles are placed near each other. Each has a charge of +2e. One particle exerts both an electric force Fe and a gravitational force Fg on the other particle.
Answer:
hi your question is incomplete below is the missing part of your question
Question : How does the direction and magnitude of Fe compare to Fg
answer : Not enough information is given
Explanation:
From the above information given in the question the direction and magnitude of FE cannot be compared to Fg and this is simply because the mass of the particle that force is been exerted on is not given therefore we cannot ascertain the magnitude of the gravitational force. Therefore we can conclude that not enough information is given
HELP
Which type of wave interaction is shown in the photo?
A. Interference
B. Refraction
C. Reflection
D. Diffraction
Answer: the answer is c (think bc im on that too)
Explanation:
The interference is a type of wave interaction shown in the photo. Option A is correct.
What is the interference of waves?The result of two or more wave trains flowing in opposite directions on a crossing or coinciding pathways. This phenomenon is known as the interference of waves.
The effect is the sum of the individual wave amplitudes at each site where more than one wave is present.
When two wave pulses are traveling along a string toward each other. They meet and the phenomenon is occur known as interference.
The interference is a type of wave interaction shown in the photo
Hence option A is correct.
To learn more about the interference of waves refer to the link;
brainly.com/question/16098226
Which wave must have a medium to travel?
A) light wave
B)compression wave
C) electromagnetic wave
D) ultraviolet wave
*****Urgent****
Letter B
without a medium, there is nothing to compress, hence, no wave. A fast- medium like a gas (air) is easy to compress and allows waves to move through it easily. a slow medium, like a liquid, is still pretty fast, but not as fast as air.
How many joules are utilized when
warming 5g of steam from 100°C to 120°C?
Answer:
Q=mc(T2-T1)
Explanation:
Ti is the temperature
m is mass
c is specific heat capacity for steam
Q is heat, [Q]=J
Pedro y Juan van a la escuela en bicicleta. Pedro vive a 5 km de distancia al este de la escuela, y Juan al oeste es decir -4 km. Si ambos hicieron un tiempo de 0.25 horas. Cuál es la velocidad de cada uno?
Answer:
Lo primero que hay que recordar es la relación:
Velocidad = Distancia/tiempo.
Para el caso de Pedro, el vive a 5km de la escuela (es decir, para llegar a la escuela, el debe recorrer -5km, entonces la distancia es -5km), y recorre esa distancia en 0.25 horas, entonces su velocidad es:
Velocidad = -5km/0.25hr = -20km/h
Esto significa que Pedro se mueve con una velocidad de -20km/h, lo que significa que se mueve hacia el oeste con un módulo de 20km/h
Para el caso de Juan, el vive a -4km de la escuela, entonces el tendrá que recorrer 4km para llegar a la escuela, y los recorre en 0.25 horas, entonces su velocidad sera:
Velocidad = 4km/0.25h = 16 km/h
Lo que significa que Juan tiene una velocidad de 16km/h hacia el este.
What is the quality of the sound of an ambulance's siren when it moves toward a stationary hearer? What is the quality of the sound of an ambulance's siren when it moves away from a stationary hearer?
Answer:
A) As the ambulance's siren moves toward a stationary hearer, the quality of sound will have a higher pitch
B) As the ambulance's siren moves away from a stationary hearer, the quality of sound will have a lower pitch.
Explanation:
From Doppler effect, the closer the source of sound gets to the observer, the higher the frequency and in turn the higher the pitch.
Meanwhile, the farther a source goes from an observer, the lower the frequency of the sound and also the lower the pitch.
Thus, as the ambulance's siren moves toward a stationary hearer, the quality of sound will have a higher pitch.
As the ambulance's siren moves away from a stationary hearer, the quality of sound will have a lower pitch.
Answer:
a. The quality of the sound would have a high pitch and thus be loud.
b. The quality of the sound would have a low pitch and thus would have a lower volume than the sound from the source.
Explanation:
Using the formula for Doppler shift f' = (v ± v')f/(v ± v") where v = speed of sound in air, v'= speed of hearer = 0 m/s (since he is stationary), v" = speed of ambulance and f = frequency of sound from ambulance
So, f' = (v ± v')f/(v ± v")
f' = (v ± 0)f/(v ± v")
f' = vf/(v ± v")
a. What is the quality of the sound of an ambulance's siren when it moves toward a stationary hearer?
Since the source (ambulance) moves towards the detector, (hearer), we would get an upwards shift in frequency. (Since our denominator has to be a minimum, so we use the minus sign for v"). So, the quality of the sound would have a high pitch and thus be loud.
b. What is the quality of the sound of an ambulance's siren when it moves away from a stationary hearer?
Since the source (ambulance) moves away the detector, (hearer), we would get a downward shift in frequency. (Since our denominator has to be a maximum, so we use the plus sign for v"). So, the quality of the sound would have a low pitch and thus would have a lower volume than the sound from the source.
What is the speed of a wave in (m/s) with a 5 meter wavelength and a period of 20 seconds?
Answer: 0.25 m/s
Explanation: Speed = wavelengt · frequency
v = λf and frequency is 1/period f = 1/T
Then v = λ/T = 5 m / 20 s = 0.25 m/s
eating disorder Symptoms
Answer:
some symptoms can be lack of energy, and dizziness.
Explanation:
Boxers wear gloves that are padded to lessen the force of a punch. Calculate the force exerted by a boxing glove on an opponent's face, if the glove and face compress 8.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. Give your answer in Newtons, do not include the unit in your answer.
Answer:
F = 4117.64
Explanation:
First, we will calculate the acceleration of the hand, by using the third equation of motion:
[tex]2as = v_f^2 - v_i^2\\[/tex]
where,
a = acceleration = ?
s = distance covered = compression = 8.5 cm = 0.085 m
vf = final speed = 0 m/s
vi = iniial speed = 10 m/s
Therefore,
[tex]2a(0.085\ m) = (0\ m/s)^2-(10\ m/s)^2\\a = - 588.23\ m/s^2[/tex]
negative sign hows deceleration.
Now, we will calculate the force exerted by the hand:
[tex]F = ma = (7\ kg)(588.23\ m/s^2)\\[/tex]
F = 4117.64 N
Gamma ray technology can be used to do which of the following?
A. Monitor human activity at night
B. Treat tumors in the body
C. Speed up the process of hardening paint
D. Communicate across long distances
Answer:
b
Explanation:
radiation can treat tumors.
Answer:
B. Treat tumors in the body
Explanation:
took quiz
how much kinetic energy does an 8 kg bowling ball have when it is thrown 9 m/s. down the alley
Answer:
324 J
Explanation:
KE= 1/2 m*v^2
1/2*8*9^2
324 joules (=^w^=) woof woof
Resolver: Una bala de 0.8 de masa se mueve horizontalmente con una velocidad de 30 m/s y se introduce en un bloque de 4kg, inicialmente en reposo. ¿Cuál es la velocidad de la bala y el bloque después del impacto?
Answer:
La velocidad del sistema bala-bloque es 5 metros por segundo.
Explanation:
El enunciado tiene una omisión gramatical. La forma correcta es la siguiente:
Una bala de 0.8 kilogramos de masa se mueve horizontalmente con una velocidad de 30 metros por segundo y se introduce en un bloque de 4 kilogramos, inicialmente en reposo. ¿Cuál es la velocidad de la bala y el bloque después del impacto?
Esta situación es un caso clásico de colisión enteramente inelástica, en donde el sistema bala-bloque no tiene influencia de fuerzas externas, entonces la situación queda descrita por la siguiente ecuación:
[tex]m_{b}\cdot v_{b,o} = (m_{b}+m_{B})\cdot v[/tex] (1)
Donde:
[tex]m_{b}[/tex] - Masa de la bala, en kilogramos.
[tex]v_{b,o}[/tex] - Velocidad inicial de la bala, en metros por segundo.
[tex]m_{B}[/tex] - Masa del bloque, en kilogramos.
[tex]v[/tex] - Velocidad del sistema bala-bloque, en metros por segundo.
Si sabemos que [tex]v_{b,o} = 30\,\frac{m}{s}[/tex], [tex]m_{b} = 0.8\,kg[/tex] y [tex]m_{B} = 4\,kg[/tex], entonces la velocidad del sistema masa-bloque es:
[tex]v = \frac{m_{b}}{m_{b}+m_{B}}\cdot v_{b,o}[/tex]
[tex]v = 5\,\frac{m}{s}[/tex]
La velocidad del sistema bala-bloque es 5 metros por segundo.
has anyone done this???i need the last questions for 1 and 2
Answer:
no i haven't done it
Explanation:
clean yo computer tho
An 8.8-magnitude earthquake in Chile in 2010 killed more than 700 people. On January 12, 2010, a less powerful earthquake, measuring 7.0, killed more than 200,000 in Haiti. Why do you think this happened?
Answer:
The main reason for this is the engineering and technology driven building construction in Chile than in Haiti
Explanation:
The main reason for this is the engineering and technology driven building construction in Chile than in Haiti. Most of the buildings in Haiti do not fit in the building byelaws norms as most of them were constructed in a short period of time with less engineering and at cheaper rate. While building in Chile were built adhering to the building codes and byelaws.
The base of the building is Chile were separated from each other using the “base isolation” technology and the were also more flexible as compared to the buildings in Haiti.
The skyscrapers in Chile were constructed in a way that they can float on the arrangements of ball bearings and padded cylinders
How are radio waves modified to send information?
Answer:
Radio waves can be modified by their amplitude or frequency in order to transmit sound or data.
Explanation:
Hope this helped!!!
Much of the United States electricity is produced by the use of coal. Starting with the energy radiating from the sun, and ending with the production of electricity, trace the many conversions of the energy involved. Within your response be sure to
• Include the key terms of mechanical, chemical, kinetic, and potential energy.
Answer:
Chemical energy to heat energy to kinetic energy to electrical energy
Identify the different parts of the face
Answer:
head
four head
hair
eyes
ears
nose
lips
chick
chin
eyebrow
eyelid
Which two structures are not found in animal cells?
A) vacioles and ribosomes
B) chloroplasts and ribosomes
C) cell walls and chloroplasts
D) endoplasmic reticulum and cell walls
Answer:
C
Explanation:
So, lets start off by thinking about what we know is in both cells, and rule out from there.
There are just some basic things you need in eukaryotic cells, those include the following:
Nucleuscell membranemitochondriacytoplasm(dont get confused with chloroplast)Rough and smooth endoplasmic reticulumGolgi vescileGolci apparatusNucleolus(Dont get confused with nulceus)Here are jsut a few examples of what can be found in both plant and animal cells, however we can already rule out all of the following except for:
C
Because remember, c talks about the chlorplast, which is not the chlorplasm found in both plant anf animal cells, its just the chloroplast found in plant cells.
Although I gave the asnwer to you. Here are some things that are in plant cells that arent in animal cells:
Cell wallvaciolescentral vaciolechlroplastplastidsAnimal cells on the other hand, have a few things that plant cells do not as well:
LysomeCentrolsomeHope this helps! ;)
Julio has a green plant on his bedroom window sill. This summer Julio and his family will be traveling. No one will be home for month. Which is julio most likely to find when he returns home from his trip
Answer:
Explanation:
A withered plant. Unless the plant is one of the many plants that have huge water retention capacity, for example, cactus. Such plants also don't need water to gr6, they just need a tiny amount of water, ba sufficient sunlight to enable them complete photosynthesis.
Any other plants asides one of the many like that, he will definitely come back to a dead, or at best, withered plant. A month is too long a time to not take care of your plant and expect it to still be up and running
2 ways in which the effects of friction can be minimised in the experiment
Answer:
Friction can be minimized by using lubricants like oil and grease and by using ball bearing between machine parts. A substance that is introduced between two surfaces in contact, to reduce friction, is called a lubricant. Fluid friction can be minimized by giving suitable shapes to the objects moving in the fluids.
Explanation:
hope it helps
what are the objectives of the tourist for visiting Nepal write in points
Answer:
The objectives of the tourist for visiting Nepal are .
It is naturally decorative .Highest mountain ️ of the world mt.everest is situated in Nepal .many rivers are there for rafting .different types of land and climate can be found .many historical , religious and cultural site are present here to visit .hope it is helpful to you ☺️
The conversion of sugar to energy in the presence of oxygen is
A.
respiration
B.
protein synthesis
C.
binary fission
D.
photosynthesis
Answer:
A. respiration.
Explanation:
Cellular respiration can be defined as a series of metabolic reactions that typically occur in cells so as to produce energy in the form of adenosine triphosphate (ATP). During cellular respiration, high energy intermediates are created that can then be oxidized to make adenosine triphosphate (ATP). Therefore, the intermediary products are produced at the glycolysis and citric acid cycle stage.
Additionally, mitochondria provides all the energy required in the cell by transforming energy forms through series of chemical reactions; breaking down of glucose into Adenosine Triphosphate (ATP) used for providing energy for cellular activities in the body of living organisms.
Basically, oxygen goes into the body of a living organism such as plants, humans and animals when they breathe while glucose is absorbed by the body when they eat.
Hence, the conversion of sugar to energy in the presence of oxygen is respiration.
Ligaments are important because they provide joints with:
A lubrication.
B cushioning.
C stability.
D flexibility
Answer:
the answer is B. it's too easy
Q1) Calculate the gravitational force between two large trucks, each with a mass of 6500 kg, if
they are parked next to each other separated by a distance of 0.5 m Ignore all other
gravitational forces.
Answer:
F = 0.0112 N
Explanation:
Given that,
Masses, [tex]m_1=m_2=6500\ kg[/tex]
The distance between masses, d = 0.5 m
We need to find the gravitational force between two large trucks. The formula for the gravitational forces is given by :
[tex]F=G\dfrac{m^2}{r^2}\\\\F=6.67\times 10^{-11}\times \dfrac{6500^2}{(0.5)^2}\\\\F=0.0112\ N[/tex]
So, the required force between masses is equal to 0.0112 N.
Which of the following regions of the EM epxtrum has the highest
frequency?
1) x rays
2) microwaves
3) infrared light
4) ultraviolet light
Answer:
1) x rays
Explanation:
Honestly Gamma rays has the Highest frequency, but in your options, gamma rays is not among, so x rays has the highest frequency among your options.
by Manshow
Answer:
The answer is (X-rays)
number 1