How could we stop an asteroid that we know was going to hit Earth?
Pls help ASAP
Answer:
An object with a high mass close to the Earth could be sent out into a collision course with the asteroid, knocking it off course. When the asteroid is still far from the Earth, a means of deflecting the asteroid is to directly alter its momentum by colliding a spacecraft with the asteroid.
Hope it helps!!
Answer:
1. deflect it 2. grab it with a claw 3. blast it to smithereens
Explanation:
2. Which group of elements are the most electronegative? *
Alkali Metals
Alkaline Earth Metals
Boron Group
Carbon Group
Nitrogen Group
Oxygen Group
Halogens
Noble Gases
Answer:
group 2
Explanation:
all this are found in group 2
Bombardier beetles release a burst of hot chemical spray with a popping sound. The chemical is sprayed from a structure present under the belly of the beetles.
Which is the likely advantage of such a behavior?
It allows the beetles to attract mates.
It allows the beetles to move obstacles out of their paths.
It allows the beetles to escape from predators.
It allows the beetles to stay warm in cold conditions.
It allows the beetles to escape from predators
When coal is burned to produce electricity, the electrical energy produced is less than the
potential energy in the coal. Which best explains this observation?
A. As coal is heated, some of the molecules move so fast that they are destroyed.
B. Some of the energy in coal is destroyed by the intense heat required to release its potential
energy
C. Some of the potential energy in coal is converted into forms of energy other than electricity.
D. The amount of potential energy in fuels is overestimated.
Answer: it should be c or b
Explanation:
The statement that best explains this observation is that some of the energy in coal is destroyed by the intense heat required to release its potential energy. The correct option is B.
What is electricity?Electricity is light energy that is produced when charged atoms move through a closed wire made up of a substance. The motion of the charged particle produces electricity.
Here, when coal is burned to produce electricity it is less than potential energy because in making energy some amount of energy is lost in the form of heat and is released. The amount of electrical energy generated from burning coal is less than the coal's potential energy.
Thus, the correct option is B. Some energy in coal is destroyed by the intense heat required to release its potential energy.
To learn more about electricity, refer to the below link:
https://brainly.com/question/14311378
#SPJ2
Drag each item to show if it is matter or not matter.
light bulb added to
sunlight
heat
lamp
matter
light bulb
not matter
Where do an organisms genes come from?
O Mother
O Father
O Both mother and father
O Neither mother nor father
Answer:
Organisms genes come from both mother and father :3
Explanation:
:3
How many grams of hydrogen has will be produced from the reaction of zinc metal with 85 grams of hydrochloric acid?
Answer:
2.4 grams of H
Explanation:
Zn+2HCl=ZnCl2+H2
85gHCl x 1 mol HCl/36.458 g HCl x 1 mol H/2 mol HCl x 2.016 g H/1 mol H = 2.4 g H. (I know this is kinda hard to read, but I had the same question for my test and this is what I did to get 2.4. I hoped this helped)
Need help with this (Chemistry)
Answer:
State is shown inside the parenthesis.
s is for solid
aq is for aqueous solutions
l for liquid
A gas sample occupies 200 mL at 760 mm Hg. What volume does the gas occupy at 400 mm Hg?
Answer:
201.9
Explanation:
when you divided 760 with 400 yo get 19.0 the add it with 200 you get that answer
Q 20.17: In IR spectroscopy, a conjugated ketone will produce a C=O signal at a ___________________ wavenumber, compared with a non-conjugated ketone of similar structure.
Answer:
See explanation
Explanation:
Infrared spectroscopy is concerned with transitions between vibrational energy levels. Each infrared active vibration leads to a change in dipole moment.
A ketone compound contains the -C=O group whose signal normally occurs at about 1710 cm-1.
A conjugated ketone is one in which the -C=O group is attached to the -C=C group. This leads to delocalization and reduces the electron density of the C=O double bond, which weakens this bond hence lowering the stretching frequency of the -C=O bond from 1710 to about 1680cm-1.
A scientist is using robots to perform thousands of experiments on different
chemical compounds to see how they affect cancer cells. What is this
process called?
A. An intravenous solution
B. Evaluating test results
C. Screening
D. Engineering process
A scientist is using robots to perform thousands of experiments on different chemical compounds to see how they affect cancer cells.This process is called Screening.
What is screening?The method to test diseases and health condition of body used by scientist and doctor is called screening. The screening helps to find problem earlier and treat them.
What is an intravenous solution?The liquid given to replace water, sugar and salt needed if you are ill or having operation.There are three type of an intravenous solution, isotonic, hypotonic and hypertonic.This an intravenous solution used in an intravenous therapy.What is evaluating test?The process by which of system and component are compared against requirement and specification through testing. The result of the evaluating test is called Evaluating test resultsWhat is Engineering process?The process used by Engineer design and create functional products. This process is a series of steps.To learn more about chemical compounds here.
https://brainly.com/question/12166462
#SPJ3
Answer: screening
Explanation:
Which two statements describe what happens to the nuclei of atoms during a fusion reaction? O A. Large nuclei break apart into two or more smaller nuclei. O B. A small amount of mass in the nuclei that combine is converted to energy. O c. Each nucleus formed has fewer protons than each original nucleus had. O D. Nuclei with small masses combine to form nuclei with larger masses.
Answer:
D. Nuclei with small masses combine to form nuclei with larger masses.
B. A small amount of mass in the nuclei that combine is converted to energy
Explanation:
A nuclear fusion, in contrary to fission, is the process by which the nuclei of two atoms combine to form a much larger atom with a large nuclei. Likewise, during a fusion reaction, a large amount of energy is released from the small amount of mass in the nuclei (two) that combines.
According to this question, the following are true of a fusion reaction:
- Nuclei with small masses combine to form nuclei with larger masses.
- A small amount of mass in the nuclei that combine is converted to enormous energy.
Which of the questions below is scientific? A. What is my blood pressure right now? B. How does regular exercise affect blood pressure? C. Who invented the device used to measure blood pressure? D. Why do most pharmacies have machines that read blood pressure?
Answer:
B
Explanation:
the reason as to why B is the answer is because, the question is one that you will have to study and find more information about, while the others are simple and do not require you to go into such detail and research.
WILL GIVE BRANLIEST
1)how many liters of HCl are produced when 47.2 L of chlorine are reacted with excess hydrogen at STP
2)if you need to make 24.0 g LiOH , how many grams of Li3N must you react with excess water?
3)How many moles of hydrogen gas can be produced from 13.2 moles of hydrochloric acid (HCl)
4)if 34.9g of copper (ll) chloride reacts with 42.1g of sodium nitrate what is the limiting reactant?
1. Calculate the molarity of a solution containing 49.3g of dissolved naphthalene (C10H8) in 217g benzene (C6H6).
2. A solution is prepared by mixing 94.2g of H2O, and 58.7g of ethanol, C2H5OH. Determine the mole fractions of each substance.
3. If you use 2.17mol of sucrose (C12H22O12) and dissolve this into 0.500kg of H2O, what will be the change in the freezing point of your solution? The freezing point depression of water (Kf) is 1.86 degrees Celsius/m.
Answer:
1. 1.56 M
2. Water → 0.803
Ethanol → 0.197
3. - 8.07°C
Explanation:
1. To solve this problem, we need benzene's density in order to determine the volume.
We assume the volume of solvent, as the volume of solution
Density for benzene is 0.8786 g/mL.
Density = m/V → V = m/density
Volume = 217 g /0.8786 g/mL = 247 mL
We convert the mass to moles and then, to mmoles
49.3 g . 1mol / 128g . 1000mmol / mol = 385.1 mmol
M = 385.1 mmol / 247mL = 1.56 M
2. We determine moles of each, solute and solvent
94.2 g. 1mol /18g = 5.23 moles of water
58.7 g . 1mol /46g = 1.28 moles of ethanol.
Total moles = 5.23 + 1.28 = 6.51
Mole fraction of water = Moles of water / Total moles
Mole fraction of ethanol = Moles of ethanol / Total moles
Water → 5.23 / 6.51 = 0.803
Ethanol → 1.28 / 6.51 = 0.197
3. Freezing point depression → ΔT = Kf . m . i
i = Van't Hoff factor, ions that are present in the solution.
As the solute is organic, i = 1.
Kf = 1.86 °C/m
m = molality (moles of solute in 1kg of solvent)
2.17 mol / 0.5kg = 4.34 m
ΔT = Freezing T° of pure solvent - Freezing T° of solution.
We replace data → 0° - Freezing T° of solution = 4.34m . 1.86°c/m . 1
Freezing T° of solution = - 8.07°C
Which type of material incorporates a variety of substances to enhance desired properties such as strength and flexibility?
metals
polymers
composites
semiconductors
Answer:
Polymers
Explanation:
Jason took 6 hours to travel 540 km. For the first 140 km, he took 2 hours.
What was his average speed during the first two hours? ___ km/h
How much distance did he cover in the last four hours of his journey? ___ km
What was his average speed for the rest of the journey? ___ km/h
What type of reaction is...
(NH4)2CO3(aq) → NH3(g) + CO2(g) + H2O(l)
a. combustion
b. single replacement
c. synthesis
d. double replacement
e. decomposition
Answer:
d: double replacement
Explanation:
We have that for the Question "What type of reaction is...
(NH4)2CO3(aq) → NH3(g) + CO2(g) + H2O(l)
" it can be said that
(NH4)2CO3(aq) → NH3(g) + CO2(g) + H2O(l) is a decomposition reaction
Option E
From the question we are told
What type of reaction is...
(NH4)2CO3(aq) → NH3(g) + CO2(g) + H2O(l)
a. combustion
b. single replacement
c. synthesis
d. double replacement
e. decomposition
Generally
We have that a combustion is a reaction with oxygen to release energy a
it is in the form of
[tex]X+0_2 ---CO_2+H_2O[/tex]
double replacement
in this reaction two ionic compounds share ions to create two variant compounds with the same amount of ions
decomposition
This occurs when a compound is broken down into smaller compounds
Therefore
(NH4)2CO3(aq) → NH3(g) + CO2(g) + H2O(l) is a decomposition reaction
Option E
For more information on this visit
https://brainly.com/question/17756498
I need the definition of Friction, choose one! Thank you
Answer:
the force resisting motion. it slows things down
I need help with dis hard stuff, you just need to make a thing on Constructing a Device to Regulate the Release of Energy
Answer:
Explanation:.the device controlled the activation as shown by the water holding room temperature for 15 seconds until activation by crushing the pills. The temperature rose 30° over two minutes, showing a measurable exothermic reaction from the Calcium Chloride dissolving in the water. Pour 5mL water in a quart bag Place Thermometer in the bag to make contact Fill two gelatin 000 capsules with 1 gram of Calcium Chloride Place capsules into the bag Wait 15 seconds to crush the capsules while they are submerged in the water Temperatures - 0 Seconds 75° 15 Seconds - Activation 75° 30 Seconds 85° 60 Seconds 95° 90 Seconds 104° 120 Seconds 105° Test #2 For this trial, the variables of the water Calcium Chloride will be increased by the factor of one.
Developing Scientific knowledge
Fill in each blank with the word that best completes the statement
Scientists develop knowledge by making
about the natural world that may lead to a
scientific question
A scientific question may lead to an)
which can be tested
The results of
can lead to changes in scientific knowledge.
Answer:
Scientists develop knowledge by making observation about the natural world that may lead to a scientific question.
A scientific question may lead to a(n) hypothesis which can be tested.
The results of experimentation can lead to changes in scientific knowledge.
Explanation:
In the process of developing scientific knowledge, scientists carry out series of observations on what happens in the natural world. This helps them to develop scientific questions. These scientific questions drawn can then lead to hypotheses which are testable.
The testing process leads to experimentation. It is in this process that much scientific questions receive answers. Testing actually lies at the core of scientific inquiry for all scientists. Whatever hypothesis made must always be tested.
The result of the testing or experimentation brings changes in scientific knowledge.
PLEASE HELP THIS IS SCIENCE
ILL MARK U BRAINLIEST
Answer: f=ma
Explanation:
is.
O2(g) + 2H2O(l) + 4e- -----------------> 4OH−(aq)
oxidation or reduction?
Answer:
Reduction
Explanation:
Oxidation is a process that involves loss of electrons.
Reduction is a process that involves gain of electrons.
In this equation, the electrons (4e-) are in the reactant side. This means that it is gain of electrons.
The reaction is a reduction reaction.
how many moles of silver nitrate are needed to produce 6.75 moles of copper (II) nitrate upon reacting with excess copper?
Answer:
13.50 moles of AgNO₃ are needed to produce 6.75 moles of Cu(NO₃)₂
Explanation:
We state the reactants:
AgNO₃
Cu
Then, the products are:
Cu(NO₃)₂
Ag
The reaction is: 2AgNO₃ + Cu → 2Ag + Cu(NO₃)₂
Ratio is 1:2.
The copper is in excess, so the limiting reactant is the silver nitrate:
1 mol of Cu(NO₃)₂ is produced by 2 moles of AgNO₃
Then, 6.75 moles of copper (II) nitrate would be produced by, the double of moles
(6 75 . 2) /1 = 13.50 moles
Which element in group 2 (Alkaline Earth Metals) is the most reactive?
Be
Mg
Ca
sr
Ba
Ra
Answer:
the reactivity of alkaline earth metals increases from top to the bottom of the group, that's because the atoms get bigger from the top to the bottom so the valence electrons are farther from the nucleus.
Scientists are now able to use the genetic code of organisms to find out more about their evolutionary history. How is this most likely to impact classification
The group of choices associated with the given question are as follows:
Organisms once thought to be unrelated may be found to be related.
Mode of nutrition of some organisms may change.
Organisms that do not have a backbone may develop one.
All multicellular organisms may be found to be prokaryotes
Answer:
The correct answer would be - Organisms once thought to be unrelated may be found to be related
Explanation:
Classification of the organisms is based on the shared characteristics and structural or environmental similarities of the organisms which are modified and evolved during the period of time. It is also known as life sciences evolve and genetic code provides more accurate information.
These evolutionary changes and will lead to certain organisms that are once thought to be unrelated organisms that may actually be related based on a genetic code. These codes have every small and accurate change that occurs and can also find out when these changes occured.
Pleaseeee help me
balance the following formula equation Al(s) + CuCl2 (aq) = AICI3 (aq) + Cu(s) Coloress
Answer:
[tex]2Al (s) + 3CuCl2( aq) --> 2AlCl3 (aq) + 3Cu(s)[/tex]
Explanation:
The main thing for this equation is to follow the amount on each side. Count each element on each side. Then by looking at the numbers figure out what numerical digit would make them equal.
For example:
On the left we have
Cu=1 and Cl=2.
But on the right we have
Cu=1 and Cl=3.
In order for them to be the same, we must add a coefficient of 3 to CuCl2 (aq0 on the left and a coefficient of 3 to Cu(s) on the right.
1.Which of the following would decrease the rate of a chemical reaction?
A Increase the temperature
B Reduce the concentration of a reactant
C Increase the concentration of a reactant
D Add a catalyst
Answer:
d.) add a catalyst
Explanation:
ae per I know this is Ur , but I am not sure so u check it
B. Reduce the concentration of a reactant
A chemical reaction is a process that leads to the chemical transformation of one set of chemical substances to another.When the surface area of reactants is more the sites available for the collisions increase. More collisions between the reactants increases the rate of a chemical reaction. Decreasing the surface area of reactants decreases available site for collision. This eventually decreases the rate of a chemical reaction.To decrease the rate of a chemical reaction, B. Reduce the concentration of a reactantFor more information:
https://brainly.com/question/1689737?referrer=searchResults
NEEED HELP PLEASE IM VERY STRESSED
Answer:
C) It moves faster and collects more data
Explanation:
write down the formula for B
example:
Hydrogen + Fluorine = Hydrogen Fluorine
help
Answer:
P³⁻ + Cl⁻ --> PCl₃
Explanation:
PCl₃: phosphorus trichloride. prefix in front of chloride is "tri"–meaning three.
Answer:
phosphorus + chlorine = phosphorus trichloride
(He asked for word equation)