In an industrial process ethanol C2H60 burns with O2 to produce heat. Each mole of ethanol produces 8842 joules during the reaction.
C2H5OH (1) + 3 O2(g) 2 CO2(g) + 3 H2O(0) + 8842 Joules
How many Kilojoules are obtained from burning 982.6 g of ethanol?

Answer:

The boiling point of gallium would be most similar to aluminum, and the boiling point of oxygen would be least similar to aluminum.

Explanation:

The atomic number of aluminum is 13, in the periodic table, magnesium lies in a similar period as Aluminum and Gallium is also present in a similar group. Thus, it can be expected that both magnesium and gallium exhibits similar boiling points with aluminum. However, gallium is a poor non-metal just like aluminum, while magnesium is a metal. Thus, it can be said that the boiling point of aluminum is more similar to gallium.

Now of the given elements, oxygen is a gas, thus, the boiling point of oxygen would be least similar to aluminum.

Answer:

the answer is a

Explanation:

an electron contains a negative charge and like charges repel each other. Hence, in a atom the force of repulsion between the atoms away from each other. As a result a molecules atoms are as far away from each others as they can get .

A molecule's atoms as far away from each other as they can get because "Forces between electron pairs push the atoms apart".

So, option C is correct one.

Since, an electron is negative charge species revolve around the nucleus of an atom. So, when two atoms come close to each other in molecules there is repulsion occurs between negative charge electron .

To learn more about electrons here.

https://brainly.com/question/18367541

#SPJ3

Answer:

Beta particles

Explanation:

A beta emission is said to occur when a neutron is converted into a proton. When a beta emission takes place, the daughter nucleus increases it's atomic number by 1. A neutrino is also produced.

Since the mass number remain the same but the daughter nucleus has it's atomic number increased by 1, then the particle is a beta particle.

Answer:

A) 0.801

Explanation:

The reaction that takes place is:

First we calculate the H₂SO₄ moles that reacted:

Now we convert H₂SO₄ moles to NaOH moles:

Finally we calculate the molarity of the NaOH solution:

So the answer is option A.

The molarity of the NaOH solution used in the neutralization reaction has been 0.801 [tex]\rm \times\;10^-^3[/tex] M. Thus, option A is correct.

The neutralization reaction has resulted in the formation of the salt and water on reacting an acid with a base. In the neutralization reaction, the strength of acid and base can be given as:

[tex]\rm 2\;NaOH\;+\;H_2SO_4\;\rightarrow\;Na_2SO_4\;+\;H_2O[/tex]

For the neutralization of 1 mole of sulfuric acid, 2 moles of NaOH has been required.

The moles of sulfuric acid can be given as:

Moles = Molarity × Volume

Given, the molarity of acid ([tex]\rm H_2SO_4[/tex]) = 0.355 M

Volume of acid = 28.2 ml = 0.0282 L

Volume of base (NaOH) = 25 ml = 0.025 L

Moles of [tex]\rm H_2SO_4[/tex] = 0.355 × 0.0282 mol

Moles of [tex]\rm H_2SO_4[/tex] = 10.011  mol.

Since, 1 mole [tex]\rm H_2SO_4[/tex] = 2 moles NaOH

10.011 moles [tex]\rm H_2SO_4[/tex] = 10.011 × 2 moles NaOH

10.011 moles [tex]\rm H_2SO_4[/tex] = 20.022 moles NaOH.

The neutralization of 0.355 M [tex]\rm H_2SO_4[/tex] requires 20.022 moles NaOH. The strength of the NaOH solution will be:

Molarity = [tex]\rm \dfrac{Moles}{Volume\;(L)}[/tex]

Molarity of NaOH = [tex]\rm \dfrac{20.022}{0.025}[/tex]

Molarity of NaOH = 0.801 [tex]\rm \times\;10^-^3[/tex] M.

The molarity of the NaOH solution used in the neutralization reaction has been 0.801 [tex]\rm \times\;10^-^3[/tex] M. Thus, option A is correct.

For more information about the neutralization reaction, refer to the link:

https://brainly.com/question/4612545

Answer:

212 degrees Fahrenheit

Explanation:

When liquid water reaches a low enough temperature, it freezes and becomes a solid—ice. When solid water is exposed to enough heat, it will melt and return to a liquid. As that liquid water is further heated, it evaporates and becomes a gas—water vapor.

Answer:

YOURE AMAZING THANK YOU THANK YOU THANK YOU

Explanation:

Answer:

F i think i pretty sure F!!!!!!!!

Answer:

The ability of an atom to accept an electron.

Explanation:

Electron affinity is measured by observing the energy change of a substance when an electron is added to it in its neutral gas form. For example, elements that are on the far right of the periodic table (excluding noble gases) are more likely to accept electrons rather than give them up. This is why Fluorine has the highest electron affinity of all atoms on the periodic table.

Explanation:

Because of this, DNA and RNA can easily dissolve in water. ... Adding ethanol helps the Na+ and PO3- ions come together, because ions travel easier in ethanol than water. The supernate is removed and new ethanol is added in the second washing. This removes any residual salt that remained on the pelleted DNA.

Answer:

DNA is polar due to its highly charged phosphate backbone. Its polarity makes it water-soluble (water is polar) according to the principle "like dissolves like". ... This fact makes water a very good solvent for charged compounds like salts.

Your DNA's sugar phosphate backbone is charged. By adding salt, we help neutralize the DNA charge and make the molecule less hydrophilic, meaning it becomes less soluble in water. The salt also helps to remove proteins that are bound to the DNA and to keep the proteins dissolved in the water.

It is well known that Ethanol has a lower dielectric constant than water, making it to promote ionic bond formations between the Na+ (from the salt) and the PO3- (from the DNA backbone), further, causing the DNA to precipitate.

Explanation:

Ideally DNA needs to be precipitated with pellet and should not remain in supernatant. DNA is acidic in nature and therefore, needs optimum salt concentration in the buffer to be pelleted from a solution. At very low salt concentration or without salt DNA would remain in supernatant.

The frequency of photon=6.03 x 10³³ /s

Radiation energy is absorbed by photons

The energy in one photon can be formulated as

[tex]\large{\boxed{\bold{E\:=\:h\:.\:f}}}[/tex]

Where

h = Planck's constant (6,626.10⁻³⁴ Js)

f = Frequency of electromagnetic waves

Energy of photon = 4 J

So the frequency :

[tex]\tt f=\dfrac{E}{h}\\\\f=\dfrac{4}{6.626.10^{-34}}\\\\f=6.03.10^{33}/s[/tex]

Answer: Cul2 + Br2 ->

Explanation:

Answer:

i believe the answer is a

Explanation:

Answer:

The oxidation state of a free element (uncombined element) is zero. For a simple (monoatomic) ion, the oxidation state is equal to the net charge on the ion. For example, Cl– has an oxidation state of -1. When present in most compounds, hydrogen has an oxidation state of +1 and oxygen an oxidation state of -2

Answer:

87.5 %

Explanation:

Step 1: Given data

Step 2: Calculate the percent yield

When working with chemical reactions, we can determine the efficience in obtaining a product measuring the percent yield. The theoretical yield is the maximum amount of product that we could obtain according to the stoichiometry, whereas the real yield is the amount of product that we actually obtain when we carry out the process. We can calculate the percent yield usign the following expression.

%yield = real yield / theoretical yield × 100%

%yield = 105 kg / 120 kg × 100%

%yield = 87.5 %

Answer:

A. since Nitrogen has 7 electrons and when it gains 3 electrons it will have 10 electrons. using short hand rule it is [Ne]

Answer:

First of all they are super tiny particles of neutrons, electrons and protons. Then they come together to organize a structure of atom. Atoms come together to form a molecule and smaller molecules work together to form macromolecules. Thus, how they organize and form building blocks of a substance.

Hope it helps!<3

Answer:

Denaturation is a process in which proteins or nucleic acids lose the quaternary structure, tertiary structure, and secondary structure which is present in their native state, by application of some

Explanation:

Answer:

5.61 e⁻³

Explanation:

Given that:

The barrier length = 0.681 nm = 6.81 × 10⁻¹⁰

The difference between the height of the barrier & the energy of the electron is;

[tex]V - E = 0.554 \ eV (1.6 \times 10^{-19} )[/tex]

= 8.864 × 10⁻²⁰ V

where;

m = 9.1 × 10⁻³¹ kg

The probability[tex]P = e^{-2 \ kd}[/tex]

[tex]k = 2 \pi \sqrt{\dfrac{2m (V-E)}{h^2} }[/tex]

[tex]k = 2 \pi \times \dfrac{\sqrt{2 \times 9.1 \times 10^{-31} \times 8.864 \times 10^{-20}}}{6.63 \times 10^{-34}}[/tex]

k = 3.806 × 10⁹

[tex]P = e^{-2 \ kd}[/tex]

[tex]P = e^{2 \times 3.806 \times 10^9 \times 6.81 \times 10^{-10}}[/tex]

P = 0.005606

P = 5.61 × 10⁻³

P = 5.61 e⁻³

Answer:

False

Explanation:

humans have 23 pairs

Answer:

1. Yes

2. it would be the same i guess

3. because it travels to popcorn kernels with its heat and makes it pop'

did i get it right?

Explanation:

Answer:

Adding or removing energy from matter causes a physical change as matter moves from one state to another. For example, adding thermal energy (heat) to liquid water causes it to become steam or vapor (a gas). And removing energy from liquid water causes it to become ice (a solid). ... Most liquids contract as they freeze.

Explanation:

have a nice day

Answer:

yes that is right

Explanation:

Answer: what is the answer im on plato

Explanation:

Answer:

Heat the molecule

Explanation:

Since most bonds require energy to form, they also give off energy when they are broken. But before most bonds break, the molecule has to be heated. Then the atoms start to move, and when they move too much, the bond breaks. Molecules that require less energy to break than they give off when broken are called fuels.

Answer: a burst

Explanation: a burst of energy could be substatuded for spark of energy

A spark of energy is required to begin the chemical reaction of burning a fossil fuel because; This spark of energy is required to attain the activation energy of the reaction.

Another name for this spark of energy is Ignition.

Definition:

The activation energy of a chemical reaction is the minimum amount of energy required for the commencement of the chemical reaction.

In this case, the spark of energy is required to attain the activation energy of the reaction.

Read more:

https://brainly.com/question/7639475

Answer:

Gibbs free energy equation

Explanation: