In a water pistol, a piston drives water through a larger tube of radius 1.30 cm into a smaller tube of radius 1.10 mm as in the figure below. Answer parts a-f.

Answers

Answer 1

It takes 0.47 seconds for water to travel from the nozzle to the ground when the water pistol is fired horizontally.

What is the time it takes for water to travel from the nozzle to the ground?

We will denote the height of the water pistol above the ground as h and the initial velocity of water exiting the nozzle as v2. Assuming negligible air resistance, we will analyze the vertical motion of the water droplets.

The vertical displacement of the water droplets is calculated using equation: h = (1/2) * g * t^2.

Rearranging equation, we solve for time:

t = sqrt(2h / g).

Given data:

Height h = 1.10 m and the acceleration due to gravity g = 9.8 m/s^2, we get:

t = sqrt(2 * 1.10 / 9.8)

t = 0.47380354147

t = 0.47 seconds.

Related Questions

Joe is painting the floor of his basement using a paint roller. The roller has a mass of 2.4 kg and a radius of 3.8 cm. In rolling the roller across the floor, Joe applies a force F = 16 N directed at an angle of 35° as shown. Ignoring the mass of the roller handle, what is the magnitude of the angular acceleration of the roller?

Answers

The magnitude of the angular acceleration of the roller is approximately 104.2 rad/s^2.

The magnitude of the angular acceleration of the roller can be determined using the torque equation and Newton's second law for rotational motion.
Step 1: Calculate the moment of inertia of the roller.
The moment of inertia (I) of a solid cylinder is given by the formula I = (1/2) * m * r^2, where m is the mass of the object and r is the radius.
In this case, the mass of the roller is 2.4 kg and the radius is 0.038 m.
So, I = (1/2) * 2.4 kg * (0.038 m)^2.
Step 2: Calculate the torque applied to the roller.
Torque (τ) is equal to the force (F) applied multiplied by the perpendicular distance (r) from the axis of rotation.
In this case, the force applied by Joe is 16 N and the distance is equal to the radius of the roller, 0.038 m.
So, τ = F * r.
Step 3: Use the torque equation.
The torque applied to the roller causes an angular acceleration (α) according to the equation τ = I * α.
Rearranging the equation, we get α = τ / I.
Step 4: Substitute the values into the equation.
Using the values we calculated earlier, we can substitute them into the equation α = τ / I.
α = (16 N * 0.038 m) / [(1/2) * 2.4 kg * (0.038 m)^2].
Step 5: Calculate the magnitude of the angular acceleration.
Evaluating the expression, we find that the magnitude of the angular acceleration of the roller is approximately 104.2 rad/s^2.
for more questions on angular acceleration
https://brainly.com/question/21278452

#SPJ8

. A 0.140 kg baseball is pitched toward home plate at 30.0 m/s.
The batter hits the ball back (opposite direction) to the pitcher at
44.0 m/s. Assume that towards home plate is positive. What is
the change in momentum for the ball?

Answers

The change in momentum for the baseball, which is hit back in the opposite direction by the batter, is -10.36 kg·m/s. This change in momentum is obtained by subtracting the initial momentum of 4.2 kg·m/s from the final momentum of -6.16 kg·m/s. The negative sign indicates the opposite direction of the momentum.

To find the change in momentum for the baseball, we can use the formula:

Change in momentum = Final momentum - Initial momentum

Momentum is defined as the product of mass and velocity.

Given data:

Mass of the baseball (m) = 0.140 kg

Initial velocity of the baseball ([tex]v_i_n_i_t_i_a_l)[/tex] = 30.0 m/s

Final velocity of the baseball ([tex]v_f_i_n_a_l_[/tex]) = -44.0 m/s (negative sign indicates opposite direction)

To calculate the initial momentum, we multiply the mass by the initial velocity:

Initial momentum = m * [tex]v_i_n_i_t_i_a_l[/tex] = 0.140 kg * 30.0 m/s = 4.2 kg·m/s

To calculate the final momentum, we multiply the mass by the final velocity:

Final momentum = m * [tex]v_f_i_n_a_l_[/tex] = 0.140 kg * (-44.0 m/s) = -6.16 kg·m/s

Now we can find the change in momentum:

Change in momentum = Final momentum - Initial momentum

Change in momentum = (-6.16 kg·m/s) - (4.2 kg·m/s)

Change in momentum = -10.36 kg·m/s

Therefore, the change in momentum for the baseball is -10.36 kg·m/s. The negative sign indicates a change in direction, as the ball is hit back in the opposite direction.

For more such information on: momentum

https://brainly.com/question/18798405

#SPJ8

Other Questions

a defendant would be entitled to counsel if she were too poor to afford an attorney in each of the following situations, except if . HowScrum Master and Project Manager are alike and how they aredifferent? List the differences between these two roles.short answer please For the first hour after a client has a cardiac catheterization using the brachial artery, which action would the nurse take? 3. Fashion Valet is one of these brands, founded by a popular Malaysian blogger, Vivy Yusof. Since 2010, Fashion Valet's platform has grown to include 400 brands, retail stores, and inhouse brands. Today, Fashion Valet is setting their sights on reaching global customers, with a local spin. Propose and explain ONE (1) target marketing strategy used by Fashion Valet. Provide relevant example to support your idea. 4. Disintermediation occurs when product or service producers cut out intermediaries and go directly to final buyers, or when radically new types of channel intermediaries displace traditional ones. Therefore, define marketing channel and explain with example FOUR (4) steps in channel design decisions. output the larger (maximum) of the two variables (values) by calling the Math.max method in a malthusian world, when technology improves, over time the living standard stays the same while population density increasestrue suppose a consumer wants to obtain the highest possible satisfaction from goods purchased on a fixed budget. which of the following must be equal for all goods? Find the area under f(x)=xlnx1 from x=m to x=m2, where m>1 is a constant. Use properties of logarithms to simplify your answer. According to Edmund Burke, a representative should be a(n) _____ who listens to the opinions of constituents and then uses his or her own best judgment to make final decisions. Examples of maximum likelihood estimators For data that comes from a discrete distribution, the likelihood function is the probability of the data as a function of the unknown parameter. For data that comes from a continuous distribution, the likelihood function is the probability density function evaluated at the data, as a function of the unknown parameter, and the maximum likelihood estimator (MLE) is the parameter value that maximizes the likelihood function. For both of the questions below, write down the likelihood function and find the maximum likelihood estimator, including a justification that you have found the maximum (this involves something beyond finding a place where a derivative is 0 ). (a) If XBin(n,), write the likelihood function and show that the MLE for is nX. (b) The exponential distribution with parameter (denoted by Exp() ) is a continuous distribution having pdf f(t)={ e t0t>0t0.Suppose T 1,T 2,,T nare independent random variables with T iExp() for all i. Defining S=T 1+T 2++T n, write the likelihood function, and show that the MLE for is sn, the reciprocal of the average of the T i's. IITo start thinking about part (a) it may help to remember the class when we were doing inference about in a poll of size n=100 with the observed data X=56. For that example we calculated and plotted the likelihoods for =0,.001,.002,,.998,.999,1, and it looked like the value that gave the highest likelihood was 0.56. Well, 0.56= 10056= nxin that example. Here we are thinking of the likelihood as a function of the continuous variable over the interval [0,1] and showing mathematically that ^= nXmaximizes the likelihood. So start by writing down the likelihood function, that is, writing the binomial probability for getting X successes in n independent trials each having success probability . Think of this as a function of (in any given example, n and X will be fixed numbers, like 100 and 56 ), and use calculus to find the ^that maximizes this function. You should get the answer ^= nX. Just as a hint about doing the maximization, you could maximize the likelihood itself, or equivalently you could maximize the log likelihood (which you may find slightly simpler).] What volume of 0.55 {M} {NaOH} (in {mL} ) is needed to reach the equivalence point in a titration of 56.0 {~mL} of 0.45 {M} {HClO}_{4} If the Federal Open Market Committee (FOMC) purchases government bonds priced at $14,000 from a bond dealer who banks at National Bank, and if the reserve requirement is 2 percent, then the excess reserves of National Bank: Group of answer choicesincrease by $280.increase by $2,800.increase by $11,200.increase by $13,720.increase by $14,000. 2. measure the critical angle from the tracing of procedure step 4. calculate the index of refraction for the lucite prism from the critical angle. Under the Investment Company Act of 1940, the investment adviser's contract must be renewed by a majority vote of the fund's:ABoard of DirectorsBoutstanding sharesCBoard of Directors or the outstanding sharesDunaffiliated Directors Why is it important to give managers some degree of flexibility in financial reporting? Discuss your answer by incorporating the idea of from relevant and reliability Is this relation a function yes or no? The budget or schedule that provides necessary input data for the direct labour budget is the production budget. True False Question 9 In the merchandise purchases budget, the required purchases (in units) for a period can be determined by subtracting the beginning merchandise inventory (in units) from the budgeted sales (in units). True False The figure is rotated 180 around the Irgun. Which point is in the interior of the rotated figure ? . Let S be a subset of R3 with exactly 3 non-zero vectors. Explain when span(S) is equal to R3, and when span(S) is not equal to R3. Use (your own) examples to illustrate your point. Find the derivative of f(x)=(-3x-12) (x4x+16).a. 64x^3-3b. 3x^2+4c. -3xd. -9x^2e. 64x^3