In a perfect world, your calorimeter will not exchange any heat with its contents. In this perfect world, if hot water loses 75 calories when cool metal pieces are poured in, how many calories do the metal pieces gain?​

Answer:

413.9 grams.

Explanation:

First, we need to calculate the molar mass of propylamine (C3H9N):

Molar mass of propylamine = (3 × atomic mass of carbon) + (9 × atomic mass of hydrogen) + atomic mass of nitrogen

Molar mass of propylamine = (3 × 12.01 g/mol) + (9 × 1.01 g/mol) + 14.01 g/mol

Molar mass of propylamine = 59.11 g/mol

Next, we can use Avogadro's number to convert the number of molecules to moles:

1 mole of propylamine = 6.022 × 10^23 molecules

moles of propylamine = (4.21 × 10^24 molecules) / (6.022 × 10^23 molecules/mol)

moles of propylamine = 7.001 mol

Finally, we can use the molar mass to convert moles to grams:

mass of propylamine = moles of propylamine × molar mass of propylamine

mass of propylamine = 7.001 mol × 59.11 g/mol

mass of propylamine = 413.9 g

Therefore, the mass of 4.21×1024 molecules of propylamine is 413.9 grams.

Answer:

the answer is 11.2 of oxygen at STP

All the questions- answers are mentioned below.

What is temperature ?

Temperature is a unit used to represent how hot or cold something is. It can be stated using the Celsius or Fahrenheit scales, among others. Temperature shows which way heat energy will naturally flow, i.e., from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature).

What is convection currents?

By the mass motion of a fluid, such as water, air, or molten rock, convection currents move heat from one location to another. The ocean currents, atmospheric weather, and geology of the earth are all driven by the heat transfer function of convection currents.

Water boiling in a pot can be seen to have convection currents. The water is heated by the heat source at the pan's base, which also gives the water more energy and causes its molecules to flow more quickly. Water density is impacted by temperature changes as well. The water is heated by the heat source at the pan's base, which also gives the water more energy and causes its molecules to flow more quickly. Water density is impacted by temperature changes as well.

Therefore, All the questions- answers are mentioned above.

Learn more about temperature from the given link.

https://brainly.com/question/25677592

#SPJ1

2.3 moles of zinc will produce 4.6 moles of hydrogen gas.

Answer: The molar ratio between zinc and hydrogen in the given chemical equation is 1:1, which means that one mole of zinc reacts with one mole of hydrogen to produce one mole of hydrogen gas.

From the balanced chemical equation, 1 mole of Zn reacts with 2 moles of HCl to produce 1 mole of H2. Therefore, to determine the number of moles of H2 produced from 2.3 moles of Zn, we need to use stoichiometry.

1 mole of Zn → 1 mole of H2

2.3 moles of Zn → x moles of H2

x = 2.3 moles of H2

Learn more about "stoichiometry" here:

https://brainly.com/question/30215297

#SPJ1

Answer:

To calculate the energy consumed by the client, we need to use the following formula:

Energy (in calories) = (grams of carbohydrate x 4) + (grams of protein x 4) + (grams of fat x 9)

First, let's calculate the amount of each nutrient in the 180ml serving:

Carbohydrates: (75 ml / serving) x (13.5 g / 75 ml) x 180 ml = 32.4 g

Protein: (75 ml / serving) x (10 g / 75 ml) x 180 ml = 24 g

Fat: (75 ml / serving) x (4 g / 75 ml) x 180 ml = 9.6 g

Now we can calculate the energy consumed:

Energy = (32.4 g x 4) + (24 g x 4) + (9.6 g x 9) = 129.6 + 96 + 86.4 = 312 calories

Therefore, the client has consumed 312 calories from the 180 ml serving of the product.

Answer:a. 2Hg(NO3)2(s) → 2Hg(l) + 2NO2(g) + O2(g)

b. Ca3(PO4)2(aq) + 2H3PO4(aq) → 3Ca(H2PO4)2(aq)

c. 3NaOH(aq) + FeCl3(aq) → Fe(OH)3(aq) + 3NaCl(aq)

Explanation:

An operating system is a piece of software that, among other things, controls peripheral devices like disc drives and printers as well as files, memory, processes, input, and output.

Architecture, information security, programming, systems, networking, analyst, development, project management, or information systems management are all possible career paths.

Careers in health informatics incorporate ideas and techniques from information science, computer science, and healthcare. These specialists might serve as clinical analysts, health information specialists, and managers of computer systems. They can also pursue employment in applied research and higher education.

To know more about information visit:-

https://brainly.com/question/30262442

#SPJ1

Explanation:

First, let's simplify the expression inside the parentheses:

8.12 - 0.9800 = 7.14 g 3.4501 + 0.16 = 3.6101 ml

Now we can multiply:

7.14 g x 3.6101 ml = 25.775914 g·ml

Rounding off to the correct accuracy (which is the product of the two original values), we get:

25.8 g·ml

Answer: The mass of 3,5 moles of NaOH is 139,99 g

Answer:

2.5 g

Explanation:

The balanced chemical equation for the reaction is:

CH4 + 2O2 → CO2 + 2H2O

From the equation, we can see that for every 1 mole of methane reacted, 2 moles of water are produced. Therefore, we need to first calculate the number of methane and oxygen moles in the reaction mixture.

The molar mass of methane is 16.04 g/mol, so the number of moles of methane present is:

2.41 g / 16.04 g/mol = 0.15 mol

The molar mass of oxygen is 32.00 g/mol, so the number of moles of oxygen present is:

4.6 g / 32.00 g/mol = 0.14 mol

We can see insufficient oxygen to react completely with all of the methane, so oxygen is the limiting reagent. To determine the maximum amount of water that can be produced, we need to use the number of moles of oxygen to calculate the number of moles of water produced and then convert that to a mass using the molar mass of water.

The balanced equation shows that 2 moles of water are produced for every 2 moles of oxygen. Therefore, the number of moles of water produced is:

0.14 mol O2 × (2 mol H2O / 2 mol O2) = 0.14 mol H2O

The molar mass of water is 18.02 g/mol, so the mass of water produced is:

0.14 mol H2O × 18.02 g/mol = 2.53 g

Rounding to 2 significant digits, the maximum mass of water that could be produced is 2.5 g.

Therefore, the pH at equivalence is 5.27 as a chemist titrates 190 ml of .2412 nitrous acid solution with .377 M KOH solution.

Titration is a laboratory technique used to determine the concentration of a solution (the analyte) by reacting it with a solution of known concentration (the titrant). This is typically done by slowly adding the titrant to the analyte until the reaction is complete, which can be determined by a change in color, pH, or other measurable property. The point at which the reaction is complete is called the equivalence point, and it corresponds to the stoichiometrically equivalent amounts of the analyte and titrant.

Here,

Nitrous acid (HNO2) is a weak acid, so we can use the Henderson-Hasselbalch equation to calculate the pH at equivalence:

pH = pKa + log([A-]/[HA])

where pKa is the acid dissociation constant, [A-] is the concentration of the conjugate base (NO2-), and [HA] is the concentration of the acid (HNO2).

At equivalence, the moles of acid will be equal to the moles of base. We can use this relationship to calculate the concentration of HNO2:

moles of HNO2 = (volume of HNO2 solution) x (concentration of HNO2 solution)

moles of KOH = (volume of KOH solution) x (concentration of KOH solution)

Since the stoichiometric ratio of KOH to HNO2 is 1:1, the moles of HNO2 will be equal to the moles of KOH at equivalence.

moles of HNO2 = moles of KOH

(volume of HNO2 solution) x (concentration of HNO2 solution) = (volume of KOH solution) x (concentration of KOH solution)

We can rearrange this equation to solve for the concentration of HNO2:

concentration of HNO2 = [(volume of KOH solution) x (concentration of KOH solution)] / (volume of HNO2 solution)

Now we can substitute this value into the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

pH = 3.35 + log([0.377 M]/[concentration of HNO2])

Plugging in the values, we get:

concentration of HNO2 = (190 ml) x (0.2412 M) / 1000 ml = 0.04581 moles/L

pH = 3.35 + log([0.377 M]/[0.04581 M])

pH = 5.27

To know more about titration,

https://brainly.com/question/2728613

#SPJ9

By using inferential control, the difficult-to-measure controlled variables are approximated from certain simple process variables before being used in feedback control.

The two types of flow meters that are frequently used to measure the density rate of flow or velocity of a flowing fluid are the venturi meter and the orifice meter. They are also referred to as variable heading meters.

An element of a physical or chemical amount that is typically monitored and managed throughout the operation of a sewage, wastewater, or industry treatment facility. Process variables like flow, level, tension, temp, turbidity, chlorine, & oxygen concentrations are frequently used.

To know more about measure controlled variables visit:

https://brainly.com/question/438542

#SPJ1

1. The number of atoms of calcium in the compound is 1.806×10²⁴ atoms

2. The total atoms in the formula is 1.806×10²⁴ atoms

The number of atoms in the compound can be obtained as follow:

1 mole of Ca = 6.02×10²³ atoms

Therefore,

3 moles of Ca = (3 moles × 6.02×10²³ atoms) / 1 mole

3 moles of Ca = 1.806×10²⁴ atoms

Thus, the number of atoms of calcium is 1.806×10²⁴ atoms

The total atoms in the compound can be obtained as follow:

1 mole of CaCl₂ = 6.02×10²³ atoms

Therefore,

3 moles of CaCl₂ = (3 moles × 6.02×10²³ atoms) / 1 mole

3 moles of CaCl₂ = 1.806×10²⁴ atoms

Thus, the total atoms is 1.806×10²⁴ atoms

Learn more about number of atoms:

brainly.com/question/15488332

#SPJ1

the pH of a solution that is 0.036 M in NH4Cl at 25 °C, x=5.3×10−6 M​.

We obtain a pH of 9.068 and 9.07 n by dividing the logarithm of the ammonium acid concentration (0.03) by the log of a ammonia concentration (0.02).

Ammonia is a salt of a weak base and a strong acid, such as hydrochloric acid (like ammonium hydroxide).Ammonium chloride's formula is NH 4 Cl, hydrochloric acid's formula is and ammonium hydroxide's formula is NH 4 OH.

To know more about solution visit:

https://brainly.com/question/30665317

#SPJ1

Explanation:

• they are found deep within earth

Answer:

A

Explanation:

fossil fuels are remains of dead plants and animals. so, they are found underground

The balanced chemical equation for the reaction is

Cl2 + 2HO → 2HCl + O2

What is  reaction ?

Reaction is a response to a situation or stimulus. It can be physical, mental, or emotional, and can range from subtle to extreme. It is a way to cope with the environment and is an important part of survival. Reactions can be conscious or unconscious and can be reflexive or voluntary. They can also be positive or negative, depending on the situation. Reactions vary depending on the individual, their experiences and their circumstances. Learning to recognize, understand, and control reactions can help people navigate challenging situations  

To learn more about  reaction

https://brainly.com/question/25769000

#SPJ1

Answer:

Explanation:

We can use Boyle's Law, which states that the product of pressure and volume is constant for a fixed amount of gas at a constant temperature. We can use this law to find the final pressure in the cylinder after filling the balloon.

The initial pressure and volume of the helium gas in the cylinder are:

P1 = 38.5 atm

V1 = 32.0 L

The final volume of the gas after filling the balloon is:

V2 = 355 L

Using Boyle's Law, we can write:

P1V1 = P2V2

where P2 is the final pressure in the cylinder.

Solving for P2, we get:

P2 = (P1V1) / V2

Plugging in the values, we get:

P2 = (38.5 atm x 32.0 L) / 355 L

P2 = 3.48 atm

Therefore, the final pressure in the cylinder after filling the balloon is 3.48 atm.

Sickle cell anemia is a genetic blood disorder that affects shape and function of red blood cells.

Sickle cell anemia is a genetic blood disorder that affects the shape and function of red blood cells. Hemostasis refers to process of maintaining balance between clotting and bleeding and sickle cell anemia can disrupt this balance in several ways.

One of the main effects of sickle cell anemia on hemostasis is that it can cause Vaso-occlusion, which is blockage of small blood vessels by sickle cells. This can cause tissue damage, inflammation and pain, which in turn can trigger an overactive clotting response.

Sickle cell anemia is caused by mutations in HBB gene, which provides instructions for making protein called hemoglobin.

Sickle cell anemia is most commonly found in people of African descent, although it can also occur in people of Hispanic, Middle Eastern, and Mediterranean ancestry.

Diagnosis of sickle cell anemia involves blood test to look for the presence of sickle hemoglobin.

To know more about sickle cell anemia, refer

https://brainly.com/question/17063471

#SPJ1

A.Homeostasis Conditions inside of an organ system must remain constant, despite changes to its external environment.An organism is kept alive by numerous chemical processes.

Homeostasis is a self-regulating process that allows an organism to retain internal stability while adapting to shifting external situations. It has emerged as the key unifying idea of physiology.

The preservation of a steady internal environment is known as homeostasis.The term "homeostasis" was developed to define the chemical and physical conditions that an organism needs maintain in order for its constituent cells, tissues, organs, or organ systems to function correctly.

To now more about organ system visit:

https://brainly.com/question/3507490
#SPJ1

Answer: A

Explanation: red eye

Answer:

Co2+ + CO32- → CoCO3

Explanation:

The molecular equation for the reaction between cobalt (II) iodide and sodium carbonate is:

CoI2 + Na2CO3 → CoCO3 + 2NaI

To write the net ionic equation, we need to eliminate the spectator ions, which are the ions that appear on both the reactant and product side of the equation and do not participate in the reaction. In this case, the spectator ions are Na+ and I-.

The net ionic equation for this reaction is:

Co2+ + CO32- → CoCO3

Therefore, the net ionic equation for the reaction between cobalt (II) iodide and sodium carbonate is:

Co2+ + CO32- → CoCO3

Answer:

2.74

Explanation:

Okay, let's go through the previous steps:

Pre-1982 pennies contribute 1.24 g to the overall mass

Post-1982 pennies contribute 1.50 g to the overall mass

To calculate the weighted average mass, I'll add these contributions together:

Pre-1982 contribution: 1.24 g

Post-1982 contribution: 1.50 g

Total weighted average mass = 1.24 g + 1.50 g = 2.74 g

Answer:

1) Reaction type: Combustion

Balanced equation: C3H8O + 5O2 → 3CO2 + 4H2O

2) Reaction type: Halogenation

Balanced equation: C4H10 + 2F2 → C4H9F + HF + F

Structural isomers of 2-methylpropane:

- 2-fluoro-2-methylpropane

- 2,2-difluoropropane

3) Reaction type: Addition

Balanced equation: C6H12 + HBr → C6H13Br

The major product is 4-bromo-4-methylpentane. The minor product is 3-bromo-4-methylpentane.

The moles of bromine needed to produce 6.9 moles of hydrobromic acid, HBr is 3.45 moles

First, we shall write the balanced equation showing the synthesis of hydrobromic acid, HBr . This is shown below

H₂ + Br₂ -> 2HBr

From the balanced equation above,

2 moles of HBr were obtained from 1 mole of Br₂.

With the above information, we can determine the number of moles of bromine needed to produce 6.90 moles of HBr. This can be obtained as follow:

From the balanced equation above,

2 moles of HBr were obtained from 1 mole of Br₂.

Therefore,

6.90 moles of HBr will be obtain from = (6.9 × 1) / 2 = 3.45 moles of Br₂

Thus, we can conclude that number of mole needed is 3.45 moles

Learn more about number of mole:

https://brainly.com/question/23350512

#SPJ1

Answer:

red in acid and green in a base

Explanation:

cabbage juice liquid thing is a pH indicator

Answer:

98.20 g

Explanation:

1 mole of Ca has 40.08 g

=> 2.45 x 40.08 = 98.196 or 98.20 g

Answer:

molar mass = 79.90 g/mol

Explanation:

Argon as a gas is Ar₂. Molar mass, as found on a standard IUPAC Periodic table, located on most high school chemistry and physics textbooks, as well as data sheets in examinations, is 2×39.95 = 79.90 g/mol.