Answer:
533.33 nm
Explanation:
Since dsinθ = mλ for each slit, where m = order of slit and λ = wavelength of light. Let m' = 10 th order fringe of the first slit of wavelength of light, λ = 640 nm and m"= 12 th order fringe of the second slight of wavelength of light, λ'.
Since the fringes coincide,
m'λ = m"λ'
λ' = m'λ/m"
= 10 × 640 nm/12
= 6400 nm/12
= 533.33 nm
Which of these is the BEST answer for why science is important?
Science can take us to other planets, even if it’s only through a telescope.
Science is part of human nature; it helps answer questions about how the world works.
Science helps us learn to think more critically and weigh evidence better.
Science gives us better tablet computers and games.
QQQUUUUCCCKKKK!!!!!!
An object is accelerated by a net force in which direction?
A. at an angle to the force
B. in the direction of the force
C. in the direction opposite to the force
D. Any of these is possible.
Answer:
B. in the direction of the force
Explanation:
Sana nakatulong
A red pool ball is rolling directly east before it collides with the
white cue ball moving directly north. Due to conservation of
momentum the total momentum of both objects after the
collision would be in which direction?
Answer: North East
Explanation: Trust me, I was just doing this on the Ck-12 and this the answer I choose and It said I'm correct.
(will give brainliest to whoever is first and gives reason) A mass is spun in a circle with a frequency of 40Hz. What is the period of its rotation?
Answer:
[tex]\huge\boxed{T = 0.025\ seconds}[/tex]
Explanation:
Given:
Frequency = f = 40 Hz
Required:
Time period = T = ?
Formula:
[tex]\sf T = 1 / f[/tex]
Solution:
T = 1 / 40
T = 0.025 seconds
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807A block and a ball have the same mass and move with the same initial velocity across a floor and then encounter identical ramps. The block slides without friction and the ball rolls without slipping. 1)Which one makes it furthest up the ramp
Answer:
Both.
Explanation:
Given that a block and a ball have the same mass and move with the same initial velocity across a floor and then encounter identical ramps. The block slides without friction and the ball rolls without slipping. 1)Which one makes it furthest up the ramp ?
Since both of them have the same mass and the same initial velocity, then, they will both have the same kinetic energy.
That is,
K.E = 1/2mv^2
Friction is a force that opposes motion. And since the frictional force is zero,
Both of them will accelerate from Newton's law.
F = ma
We can therefore conclude that both of them will make it further up the ramp.
Cells use nutrients and oxygen to supply the body with the energy it needs. What three-body systems are working together in this situation?
A
nervous, digestive, and circulatory systems
B
digestive, circulatory, and excretory systems
C
circulatory, immune, and respiratory systems
D
digestive, respiratory, and circulatory systems
Answer:
The respiratory system provides oxygen for cells, while the circulatory system transports oxygen to cells.
Explanation:
so the answer is D
an iron Tyre of diameter 50cm at 288k is to be shrank on to a wheel of diameter 50.35cm.To what temperature must the tyre be heated so that it will slip over the wheel with a radial gap of 0.5mm.Linear expansivity of iron is 0.000012k-1
Answer:
The answer should be D
Explanation:
TRUE OR FALSE
2 QUESTIONS
NEED HELP ASAP
THX :)
LOTS OF POINTS :>
Answer: Both False
Explanation:
Our Milky Way Galaxy is a spiral galaxy. Some spiral galaxies are what we call "barred spirals" because the central bulge looks elongated
Irregualuar glaxyices are all over the place
PLEASE HELP The United States spends over $20 billion a year on space exploration through NASA. Do you think that this has been worth the cost? In three to five sentences, provide two specific examples of things we have learned from space exploration, and explain how these examples influence your opinion.(4 points)
Answer: I think $20 billion a year it’s worth the cost. The reasoning behind that is because we can conduct research on various things that could help out humanity. Therefore we can conclude that’s spending billions of dollars every year is worth it.
Explanation:
Calculate the first and second order angles for light of wavelength 400. nm and 700. nm of the grating contains 1.00 x 104 lines/cm.
Answer:
[tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex]
[tex]44.43^{\circ}[/tex], second order does not exist
Explanation:
n = Number of lines grating = [tex]1\times10^4\ \text{Lines/cm}[/tex]
[tex]\lambda[/tex] = Wavelength
m = Order
Distance between slits is given by
[tex]d=\dfrac{1}{n}\\\Rightarrow d=\dfrac{1}{1\times 10^4}\\\Rightarrow d=10^{-6}\ \text{m}[/tex]
[tex]\lambda=400\ \text{nm}[/tex]
m = 1
We have the relation
[tex]d\sin\theta=m\lambda\\\Rightarrow \theta=\sin^{-1}\dfrac{m\lambda}{d}\\\Rightarrow \theta=\sin^{-1}\dfrac{1\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=23.58^{\circ}[/tex]
m = 2
[tex]\theta=\sin^{-1}\dfrac{2\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=53.13^{\circ}[/tex]
The first and second order angles for light of wavelength 400 nm are [tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex].
[tex]\lambda=700\ \text{nm}[/tex]
m = 1
[tex]\theta=\sin^{-1}\dfrac{1\times 700\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=44.43^{\circ}[/tex]
m = 2
[tex]\theta=\sin^{-1}\dfrac{2\times 700\times 10^{-9}}{10^{-6}}[/tex]
Here [tex]\dfrac{2\times 700\times 10^{-9}}{10^{-6}}=1.4>1[/tex] so there is no second order angle for this case.
The first order angle for light of wavelength 700 nm are [tex]44.43^{\circ}[/tex].
Second order angle does not exist.
As a delivery truck travels along a level stretch of road with constant speed, most of the power developed by the engine is used to compensate for the energy transformations due to friction forces exerted on the delivery truck by the air and the road. If the power developed by the engine is 4.12 hp, calculate the total friction force acting on the delivery truck (in N) when it is moving at a speed of 30 m/s. One horsepower equals 746 W.
Answer:
102.5N
Explanation:
Given that a delivery truck travels along a level stretch of road with constant speed, most of the power developed by the engine is used to compensate for the energy transformations due to friction forces exerted on the delivery truck by the air and the road. If the power developed by the engine is 4.12 hp, calculate the total friction force acting on the delivery truck (in N) when it is moving at a speed of 30 m/s. One horsepower equals 746 W
The power = 4.12 × 746 = 3073.52 W
Using the formula
Power = force × velocity
3073.52 = force × 30
Force = 3073.52 / 30
Force = 102.5 N
Since most of the power developed by the engine is used to compensate for the energy transformations due to friction forces exerted on the delivery truck by the air and the road, therefore,
the total friction force acting on the delivery truck (in N) when it is moving at a speed of 30 m/s is 102.5 N
Two resistors have resistances R1 and R2. When the resistors are connected in series to a 12.6-V battery, the current from the battery is 2.07 A. When the resistors are connected in parallel to the battery, the total current from the battery is 8.98 A. Determine R1 and R2. (Enter your answers from smallest to largest.)
Answer:
When R1 = 2.193, R2 = 3.894
When R1 = 3.894, R2 = 2.193
Explanation:
We are told that when R1 and R2 are connected in series, the voltage is 12.6 V and the current is 2.07 A.
Formula for resistance is;
R = V/I
R = 12.6/2.07
R = 6.087 ohms
Since R1 and R2 are connected in series.
Thus; R1 + R2 = 6.087 ohms
R1 = 6.087 - R2
We are also told that when they are connected in parallel, the current is 8.98 A.
Thus, R = 12/8.98
R = 1.403 ohms
Thus;
(1/R1) + (1/R2) = 1/1.403
Let's put 6.087 - R2 for R1;
(1/(6.087 - R2)) + (1/R2) = 1/1.403
Multiply through by 1.403R2(6.087 - R2) to get;
1.403R2 + 1.403(6.087 - R2) = R2(6.087 - R2)
Expanding gives;
1.403R2 + 8.54 - 1.403R2 = 6.087R2 - (R2)²
(R2)² - 6.087R2 + 8.54 = 0
Using quadratic formula, we have;
R2 = 2.193 ohms or 3.894 ohms
Thus,
R1 = 6.087 - 2.193 or R1 = 6.087 - 3.894
R1 = 3.894 or 2.193
When R1 = 2.193, R2 = 3.894
When R1 = 3.894, R2 = 2.193
discuss two reasons why people find transition between school and university
Answer:
Is that your answer
What is diffraction of light
Answer:
According to "http://ww2010.atmos.uiuc.edu" Diffraction is the slight bending of light as it passes around the edge of an object.
Some examples of Light Defraction would be..
-CD reflecting rainbow colours
-Sun appears red during sunset
-From the shadow of an object
Solve the below problems being sure to provide the correct significant figures.
1) 1000 ÷ 4.886 = __________
2) 240 ÷ 12.3 = __________
3) 80 x 4.6 = __________
4) 4.527 x 30 = __________
5) 86 x 63.855 x 8000 = __________
6) 700 x 91.186 = __________
7) 7.1 x 348 = __________
8) 50 ÷ 29.1 = __________
9) 98.773 x 24.891 x 409 = __________
10) 0.065 x 3 x 3007 = __________
Answer:
1) 204.6663938
2) 19.51219512
3) 368
4) 135.81
5) 43932240
6) 63830.2
7) 2470.8
8) 1.718213058
9) 1005550.526
10) 586.365
Most of the questions you asked were in repeating decimal form.
Explanation:
an inventor makes a clock using a brass rod and a heavy mass as a pendulum.WHAT Happens when the clock get colder?
An inventor makes a clock using a brass rod and a heavy mass as a pendulum. when the clock gets colder then the time clock would gain time
What is thermal expansion?The expansion of any material due to the variation of the temperature is known as thermal expansion. It varied differently for different materials according to their corresponding values of the coefficient of the thermal expansion.
As given in the problem statement that an inventor makes a clock using a brass rod and a heavy mass as a pendulum, when the clock gets colder then the length of the brass decreases due to thermal expansion.
The length of the pendulum gets reduced which further results in the reduction in the time period, as per the formula of the time period for the pendulum
T = 2π√(L/g)
As the length of the brass gets reduced. This means the pendulum of the clock moves faster and the clock would gain time
Thus, if a pendulum made of a heavy mass and a brass rod is used to create a clock by an inventor. The time clock would advance in time as the clock get colder
Learn more about Thermal expansion here
brainly.com/question/14092908
#SPJ5
A ball is sitting at the top of a ramp. As the ball rolls down the ramp, the potential energy of the ball decreases, what happens to the potential energy as the ball moves
Answer:
the potential energy decreases as it is converted to kinetic energy.
Explanation:
As things move, their potential energy converts to kinetic energy to power them along. When a ball rolls down the top of a ramp, all the potential energy it accumulated at the top of the ramp converts to kinetic energy to help it roll down. In other words, its potential energy decreases as its kinetic energy increases.
23
In order for a 12 Volt power source
to produce a current of 0.085 amps,
a resistance of...
[?] Ohms is needed.
Enter
Haven't learned this yet.
Answer:
141.18 ohms
Explanation:
From the question given above, the following data were obtained:
Voltage (V) = 12
Current (I) = 0.085 A
Resistance (R) =?
The resistance needed can be obtained as follow:
V = IR
12 = 0.085 × R
Divide both side by 0.085
R = 12 / 0.085
R = 141.18 ohms
Therefore, a resistor of resistance 141.18 ohms is needed.
Two students Tim and Alane travel to South Dakota. Tim stands on Earth’s surface and enjoys some sunshine. At the same time, Alane descends into a gold mine where neutrinos are detected, Although the photon at the surface and the neutrinos in the mine arrive at the same time, they have had very different histories. Describe the differences.
Answer:
Explanation:
Neutrinos are otherwise called leptons. They are principal particles. A lepton is a rudimentary half-spin molecule that doesn't go through solid reactions. Neutrinos are not usually charged and exceptionally light weighted so they once in a while interface with other matter. Neutrinos are light weighted. Their mass is around 10⁻⁷ kg. A neutrino possesses a small radius, too little to ever be estimated. A little span and very less mass make them imperceptible. Since neutrinos have next to no mass. they travel at almost the speed of light and thus they arrive at the outside of the Sun in only 2 seconds, dissimilar to photons which take convoluted ways to arrive at the Sun's surface in a huge number of years.
The photon and neutrino, both were made in the Sun's center yet on various occasions. The neutrino is only a couple of minutes old though the photon is around 1,000,000 years of age. At the point when the photon was made in the Sun's center. it needed to venture out to the outside of the Sun. in any case, rather because of its hefty mass and cooperation with other matter, it headed out a crisscross way to the surface. Ordinarily, it was repulsed and it was sent back to the middle where it needed to begin once more. It required a large number of years for a photon to arrive at the outside of the Sun.
Nonetheless, when it arrived at the Sun's surface, it required just 8.8 minutes for the photon to arrive at Earth. The neutrino was anyway made only a couple of minutes prior in the Sun's center. Since it has an entirely irrelevant mass, little size, and no charge, it didn't interface with its environmental factors. So it just required 2 seconds for the neutrino to arrive at the Sun's surface. When it arrived at the Sun's surface, it arrived at the earth in about 8.8 minutes. with the photon. So both, photon and neutrino have various histories as the two of them were made at a hole of around 1,000,000 years.
Can two waves have the
same wavelength but different amplitudes?
Explain
Answer:
I think Yes because they could have different amounts of energy.
Explanation:
When grip strength increases:
a. action potential voltage increases.
b. action potential frequency decreases.
c. action potential frequency increases.
d. action potential frequency increases.
e. the number of active motor units increases.
Answer:
e. the number of active motor units increases.
Explanation:
There is a direct relationship between the number of active motor units and the grip strength in a given scenario. For example, increase in the grip strength leads to increase in the number of active motor units. In the other-hand, the decrease in grip strength leads to the decrease in the number of active motor units.
How does the REE change as a person ages?
Explain
I go to k12 too and i am writing this test now too. I am like pretty sure my answer is correct. I guess we can kinda help eachother with this assignment cuz i am sorta stuck too.
The older a person gets, the greater REE he has.I dont know i hope this helped a bit I know its not much i need help with this too.
Which of the following is generally true for people in their old age?
Answer:As people get older, most become better able to regulate negative feelings and emphasize the positive.
Explanation: With age, your skin thins and becomes less elastic and more fragile, and fatty tissue just below the skin decreases. You might notice that you bruise more easily. Decreased production of natural oils might make your skin drier. Wrinkles, age spots and small growths called skin tags are more common.
A motorcycle is traveling along a highway at 29 m/s. How far does the motorcycle travel in 18 s?
Answer:
the motorcycle travels 522 miles in 18 seconds Explanation: 29 x 18 is 522 I'm pretty sure that's what it was asking but I don't know
Which is an example of a noncontract force?
(A) elastic force
(B) Normal force
(C)Applied force
(D) Electric Force
Answer:
electric force
Explanation:
its a contact and noncontact force
A reaction occurs when a compound breaks down. This reaction has one reactant and two or more products. Energy, as from a battery, is usually needed to break the compound apart.
Answer:
decomposition
Explanation:
A class is learning about states of matter. The students set up the investigation in the diagram.
Which kinds of energy are needed in this investigation to change the state of matter of the owl made of wax?
A uniform-density 7 kg disk of radius 0.20 m is mounted on a nearly frictionless axle. Initially it is not spinning. A string is wrapped tightly around the disk, and you pull on the string with a constant force of 42 N through a distance of 0.9 m. Now what is the angular speed
Answer:
The angular speed is 23.24 rad/s.
Explanation:
Given;
mass of the disk, m = 7 kg
radius of the disk, r = 0.2 m
applied force, F = 42 N
distance moved by disk, d = 0.9 m
The torque experienced by the disk is calculated as follows;
τ = F x d = I x α
where;
I is the moment of inertia of the disk = ¹/₂mr²
α is the angular acceleration
F x r = ¹/₂mr² x α
The angular acceleration is calculated as;
[tex]\alpha = \frac{2Fr}{mr^2} \\\\\ \alpha = \frac{2F}{mr}\\\\\alpha = \frac{2 \times 42 }{7 \times 0.2} \\\\\alpha = 60 \ rad/s^2[/tex]
The angular speed is determined by applying the following kinematic equation;
[tex]\omega _f^2 = \omega_i ^2 + 2\alpha \theta[/tex]
initial angular speed, ωi = 0
angular distance, θ = d/r = 0.9/0.2 = 4.5 rad
[tex]\omega _f^2 = 2\alpha \theta\\\\\omega _f = \sqrt{2\alpha \theta} \\\\\omega _f = \sqrt{2 \times 60 \times 4.5} \\\\\omega _f = 23.24 \ rad/s[/tex]
Therefore, the angular speed is 23.24 rad/s.
Diffraction occurs for all types of waves, including sound waves.
a. True
b. False
Answer:
a. True
Explanation:
Sound are mechanical waves that are highly dependent on matter for their propagation and transmission.
Sound travels faster through solids than it does through either liquids or gases. A student could verify this statement by measuring the time required for sound to travel a set distance through a solid, a liquid, and a gas.
Mathematically, the speed of a sound is given by the formula:
[tex] Speed = wavelength * frequency [/tex]
Generally, the frequency of a sound wave determines the pitch of the sound that would be heard.
Diffraction occurs for all types of waves, including sound waves.
A 41.0-kg crate, starting from rest, is pulled across level floor with a constant horizontal force of 135 N. For the first 15.0 m the floor is essentially frictionless, whereas for the next 12.0 m the coefficient of kinetic friction is 0.320. (a) Calculate the work done by all the forces acting on the crate, during the entire 27.0 m path. (b) Calculate the total work done by all the forces. (c) Calculate the final speed of the crate after being pulled these 27.0 m.
Answer:
Explanation:
From the information given;
mass of the crate m = 41 kg
constant horizontal force = 135 N
where;
[tex]s_1 = 15.0 \ m \\ \\ s_2 = 12.0 \ m[/tex]
coefficient of kinetic friction [tex]u_k[/tex] = 0.28
a)
To start with the work done by the applied force [tex](W_f)[/tex]
[tex]W_F = F\times (s_1 +s_2) \times cos(0) \ J[/tex]
[tex]W_F = 135 \times (12 +15) \times cos(0) \ J \\ \\ W_F = (135 \times 37 )J \\ \\ W_F =4995 \ J[/tex]
Work done by friction:
[tex]W_{ff} = -\mu\_k\times m \times g \times s_2 \\ \\ W_{ff} = -0.320 \times 41 \times 9.81 \times 12 \ J \\ \\ W_{ff} = -1544.49 \ J[/tex]
Work done by gravity:
[tex]W_g = mg \times (s_1+s_2) \times cos (90)} \ J \\ \\ W_g = 0 \ j[/tex]
Work done by normal force;
[tex]W_n = N \times (s_1 + s_2) \times cos (90) \ J[/tex]
[tex]W_n = 0 \ J[/tex]
b)
total work by all forces:
[tex]W = F \times (s_1 + s_2) + \mu_k \times m \times g \times s_2 \times 180 \\ \\ W = 135 \times (15+12) \ J - 0.320 \times 41 \times 9.81 \times 12[/tex]
W = 2100.5 J
c) By applying the work-energy theorem;
total work done = ΔK.E
[tex]W = \dfrac{1}{2}\times m \times (v^2 - u^2)[/tex]
[tex]2100.5 = 0.5 \times 41 \times v^2[/tex]
[tex]v^2 = \dfrac{2100.5}{ 0.5 \times 41 }[/tex]
[tex]v^2 = 102.46 \\ \\ v = \sqrt{102.46} \\ \\ \mathbf{v = 10.1 \ m/s}[/tex]